FCC ID LDK88611057
CISCO IP Phone
by Cisco Systems Inc
Grantee Code: LDK Product Code: 88611057
Latest application date: 2016-06-02
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-06-02 |
| 5180-5240 MHz | Original Equipment | 2014-06-11 |
| 2402-2480 MHz | Original Equipment | 2014-06-11 |
| 2412-2462 MHz | Original Equipment | 2014-06-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2014-07-26 | PDF 3.8 MB |
| Internal Photos | Internal Photos | 2014-07-26 | PDF 1.5 MB |
| External Photos | External Photos | 2014-07-26 | PDF 1.4 MB |
| Label and Location | ID Label/Location Info | 2014-06-11 | PDF 1 MB |
| Test Photos | Test Setup Photos | 2016-06-02 | PDF 4.4 MB |
| Test Setup Photos | Test Setup Photos | 2014-07-26 | PDF 807.1 KB |
| Test Report Revised 060116 | Test Report | 2016-06-02 | PDF 2.8 MB |
| Test Report DFS 1 | Test Report | 2014-06-11 | PDF 4.9 MB |
| Test Report DFS 2 | Test Report | 2014-06-11 | PDF 4.7 MB |
| Test Report DFS 3 | Test Report | 2014-06-11 | PDF 5.2 MB |
| Test Report DSS | Test Report | 2014-06-11 | PDF 2.2 MB |
| Test Report DTS 1 | Test Report | 2014-06-11 | PDF 3.2 MB |
| Test Report DTS 2 | Test Report | 2014-06-11 | PDF 2.7 MB |
| Test Report NII 1 | Test Report | 2014-06-11 | PDF 2.4 MB |
| Test Report NII 2 | Test Report | 2014-06-11 | PDF 4.7 MB |
| Attestation Statement Passive Scan | Attestation Statements | 2014-06-11 | PDF 81.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2016-06-02 | PDF 120.2 KB |
| Cover Letter 1 | Cover Letter(s) | 2016-06-02 | PDF 47 KB |
| Cover Letter 2 | Cover Letter(s) | 2016-06-02 | PDF 59 KB |
| Authorization Letter | Cover Letter(s) | 2014-06-11 | PDF 95.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2014-06-11 | PDF 106.2 KB |
| RF Exposure MPE | RF Exposure Info | 2014-06-11 | PDF 1.3 MB |
| Block Diagram Metadata only | Block Diagram | PDF 615.4 KB | |
| Schematics 1 Metadata only | Schematics | PDF 1.5 MB | |
| Schematics 2 Metadata only | Schematics | PDF 1.4 MB | |
| Description Metadata only | Operational Description | PDF 74.3 KB | |
| Software Secruity D02 Info Revised Metadata only | Operational Description | PDF 112.8 KB | |
| Parts List and Tune Up Metadata only | Parts List/Tune Up Info | PDF 332.4 KB |
Application Information
| Application ID | L0189LtHEA0HWk7I9wdAPg== |
|---|---|
| Final Action Date | 2016-06-02 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004968939 |
| Model | 88611057 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | CISCO IP Phone |
| Responsible Party | Samuel Kim, Manager, Engineering, samukim@cisco.com  , 408-527-1446 |
| Technical Contact | Jose Aguirre, CISCO Systems, Inc., joaguirr@cisco.com , 4085250835 |
| Non-Technical Contact | Lisa Bevington, CISCO Systems, Inc., lbevingt@cisco.com , 4088539174 |
| Test Firm | Gerald Thorpe, Cisco Systems, Inc., gthorpe@cisco.com , 408-525-7602 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(i) for devices with no changes to hardware or output power. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| L0189LtHEA0HWk7I9wdAPg== | 2016-06-02 | Class II permissive change or modification of presently authorized equipment |
| qNTC6k1muCEbAWopLxeTkg== | 2014-06-11 | Original Equipment |
| 8gVPNOp1/64tYU8OBTSibQ== | 2014-06-11 | Original Equipment |
| +u6uIwlSuvgs9sWbX7kk8g== | 2014-06-11 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0036000 | 15C | 68, CC |
| 2412-2462 MHz | 0.0428 | 15C | 68, CC |
| 2422-2452 MHz | 0.0237 | 15C | 68, CC |
| 5180-5240 MHz | 0.0242 | 15E | 68, CC |
| 5190-5230 MHz | 0.0202 | 15E | 38, 68, CC |
| 5190-5230 MHz | 0.0202 | 15E | 68, CC |
| 5210 MHz | 0.0182 | 15E | 38, 68, CC |
| 5210 MHz | 0.0182 | 15E | 68, CC |
| 5260-5320 MHz | 0.0252 | 15E | 38, 68, CC, ND |
| 5260-5320 MHz | 0.0252 | 15E | 68, CC, ND |
| 5270-5310 MHz | 0.0201 | 15E | 38, 68, CC, ND |
| 5270-5310 MHz | 0.0201 | 15E | 68, CC, ND |
| 5290 MHz | 0.0114 | 15E | 38, 68, CC, ND |
| 5290 MHz | 0.0114 | 15E | 68, CC, ND |
| 5500-5700 MHz | 0.0219 | 15E | 38, 68, CC, ND |
| 5500-5700 MHz | 0.0219 | 15E | 68, CC, ND |
| 5510-5670 MHz | 0.0198 | 15E | 38, 68, CC, ND |
| 5510-5670 MHz | 0.0198 | 15E | 68, CC, ND |
| 5530 MHz | 0.017 | 15E | 38, 68, CC, ND |
| 5530 MHz | 0.017 | 15E | 68, CC, ND |
| 5745-5825 MHz | 0.037 | 15E | 38, 68, CC |
| 5745-5825 MHz | 0.0329 | 15C | 68, CC |
| 5755-5795 MHz | 0.017 | 15E | 38, 68, CC |
| 5755-5795 MHz | 0.0193 | 15C | 68, CC |
| 5775 MHz | 0.019 | 15E | 38, 68, CC |
| 5775 MHz | 0.0189 | 15C | 68, CC |
Grants
TCB Grant - Application qNTC6k1muCEbAWopLxeTkg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/11/2014 Application Dated: 06/10/2014 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK88611057 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco IP Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 CC | 15E | 5180.0 - 5240.0 | 0.0242 | ||
| 68 CC | 15E | 5190.0 - 5230.0 | 0.0202 | ||
| 68 CC | 15E | 5210.0 - 5210.0 | 0.0182 | ||
| 68 CC ND | 15E | 5260.0 - 5320.0 | 0.0252 | ||
| 68 CC ND | 15E | 5270.0 - 5310.0 | 0.0201 | ||
| 68 CC ND | 15E | 5290.0 - 5290.0 | 0.0114 | ||
| 68 CC ND | 15E | 5500.0 - 5700.0 | 0.0219 | ||
| 68 CC ND | 15E | 5510.0 - 5670.0 | 0.0198 | ||
| 68 CC ND | 15E | 5530.0 - 5530.0 | 0.017 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz 5.47-5.725GHz bands and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application qNTC6k1muCEbAWopLxeTkg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 06/11/2014 Application Dated: 06/10/2014 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK88611057 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco IP Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 CC | 15E | 5180.0 - 5240.0 | 0.0242 | ||
| 68 CC | 15E | 5190.0 - 5230.0 | 0.0202 | ||
| 68 CC | 15E | 5210.0 - 5210.0 | 0.0182 | ||
| 68 CC ND | 15E | 5260.0 - 5320.0 | 0.0252 | ||
| 68 CC ND | 15E | 5270.0 - 5310.0 | 0.0201 | ||
| 68 CC ND | 15E | 5290.0 - 5290.0 | 0.0114 | ||
| 68 CC ND | 15E | 5500.0 - 5700.0 | 0.0219 | ||
| 68 CC ND | 15E | 5510.0 - 5670.0 | 0.0198 | ||
| 68 CC ND | 15E | 5530.0 - 5530.0 | 0.017 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz 5.47-5.725GHz bands and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/02/2016 Application Dated: 06/02/2016 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK88611057 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | CISCO IP Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 68 CC | 15E | 5180.0 - 5240.0 | 0.0242 | ||
| 38 68 CC | 15E | 5190.0 - 5230.0 | 0.0202 | ||
| 38 68 CC | 15E | 5210.0 - 5210.0 | 0.0182 | ||
| 38 68 CC ND | 15E | 5260.0 - 5320.0 | 0.0252 | ||
| 38 68 CC ND | 15E | 5270.0 - 5310.0 | 0.0201 | ||
| 38 68 CC ND | 15E | 5290.0 - 5290.0 | 0.0114 | ||
| 38 68 CC ND | 15E | 5500.0 - 5700.0 | 0.0219 | ||
| 38 68 CC ND | 15E | 5510.0 - 5670.0 | 0.0198 | ||
| 38 68 CC ND | 15E | 5530.0 - 5530.0 | 0.017 | ||
| 38 68 CC | 15E | 5745.0 - 5825.0 | 0.037 | ||
| 38 68 CC | 15E | 5755.0 - 5795.0 | 0.017 | ||
| 38 68 CC | 15E | 5775.0 - 5775.0 | 0.019 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(i) for devices with no changes to hardware or output power. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application L0189LtHEA0HWk7I9wdAPg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 06/02/2016 Application Dated: 06/02/2016 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK88611057 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | CISCO IP Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 68 CC | 15E | 5180.0 - 5240.0 | 0.0242 | ||
| 38 68 CC | 15E | 5190.0 - 5230.0 | 0.0202 | ||
| 38 68 CC | 15E | 5210.0 - 5210.0 | 0.0182 | ||
| 38 68 CC ND | 15E | 5260.0 - 5320.0 | 0.0252 | ||
| 38 68 CC ND | 15E | 5270.0 - 5310.0 | 0.0201 | ||
| 38 68 CC ND | 15E | 5290.0 - 5290.0 | 0.0114 | ||
| 38 68 CC ND | 15E | 5500.0 - 5700.0 | 0.0219 | ||
| 38 68 CC ND | 15E | 5510.0 - 5670.0 | 0.0198 | ||
| 38 68 CC ND | 15E | 5530.0 - 5530.0 | 0.017 | ||
| 38 68 CC | 15E | 5745.0 - 5825.0 | 0.037 | ||
| 38 68 CC | 15E | 5755.0 - 5795.0 | 0.017 | ||
| 38 68 CC | 15E | 5775.0 - 5775.0 | 0.019 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(i) for devices with no changes to hardware or output power. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/11/2014 Application Dated: 06/10/2014 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK88611057 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Cisco IP Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 CC | 15C | 2402.0 - 2480.0 | 0.0036 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 8gVPNOp1/64tYU8OBTSibQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 06/11/2014 Application Dated: 06/10/2014 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK88611057 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Cisco IP Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 CC | 15C | 2402.0 - 2480.0 | 0.0036 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/11/2014 Application Dated: 06/10/2014 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK88611057 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco IP Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 CC | 15C | 2412.0 - 2462.0 | 0.0428 | ||
| 68 CC | 15C | 2422.0 - 2452.0 | 0.0237 | ||
| 68 CC | 15C | 5745.0 - 5825.0 | 0.0329 | ||
| 68 CC | 15C | 5755.0 - 5795.0 | 0.0193 | ||
| 68 CC | 15C | 5775.0 - 5775.0 | 0.0189 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter has 20 MHz, 40 MHz and 80MHz bandwidth modes as described in this filing. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +u6uIwlSuvgs9sWbX7kk8g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 06/11/2014 Application Dated: 06/10/2014 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK88611057 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco IP Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 CC | 15C | 2412.0 - 2462.0 | 0.0428 | ||
| 68 CC | 15C | 2422.0 - 2452.0 | 0.0237 | ||
| 68 CC | 15C | 5745.0 - 5825.0 | 0.0329 | ||
| 68 CC | 15C | 5755.0 - 5795.0 | 0.0193 | ||
| 68 CC | 15C | 5775.0 - 5775.0 | 0.0189 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter has 20 MHz, 40 MHz and 80MHz bandwidth modes as described in this filing. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |