FCC ID LDKASA-AP702
ASA 5506-X WiFi Internal Module
by Cisco Systems Inc
Grantee Code: LDK Product Code: ASAAP702
Latest application date: 2015-08-18
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class III permissive change to software defined radio | 2015-08-18 |
| 2412-2462 MHz | Original Equipment | 2015-02-03 |
| 5180-5240 MHz | Original Equipment | 2015-02-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2015-12-23 | PDF 93.2 KB |
| Internal Photos | Internal Photos | 2015-07-15 | PDF 1.2 MB |
| External Photos | External Photos | 2015-07-15 | PDF 103.8 KB |
| Label Info | ID Label/Location Info | 2015-02-03 | PDF 47.4 KB |
| Test Setup Photos DFS | Test Setup Photos | 2015-12-23 | PDF 79.9 KB |
| Test Setup Photos RF | Test Setup Photos | 2015-12-23 | PDF 376.2 KB |
| Co-location Report | Test Report | 2015-08-18 | PDF 114.4 KB |
| Test Report DFS | Test Report | 2015-08-18 | PDF 1.1 MB |
| Test Report RF b2-b3 | Test Report | 2015-08-18 | PDF 2.1 MB |
| Test Report | Test Report | 2015-02-03 | PDF 1.8 MB |
| Test Report Co-Location | Test Report | 2015-02-03 | PDF 114.4 KB |
| Test Report Co-location | Test Report | 2015-02-03 | PDF 114.4 KB |
| Test Report RF | Test Report | 2015-02-03 | PDF 1.9 MB |
| Authorized Signature | Cover Letter(s) | 2015-08-18 | PDF 28 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2015-08-18 | PDF 28.2 KB |
| Confidentiality Letter | Cover Letter(s) | 2015-08-18 | PDF 32.5 KB |
| POA | Cover Letter(s) | 2015-08-18 | PDF 26.6 KB |
| Restricted Band Declaration Letter | Cover Letter(s) | 2015-08-18 | PDF 21.9 KB |
| Uniform Spreading TPC Declaration Letter | Cover Letter(s) | 2015-08-18 | PDF 28.6 KB |
| Authority Letter | Cover Letter(s) | 2015-02-03 | PDF 28 KB |
| Authorization Letter | Cover Letter(s) | 2015-02-03 | PDF 28 KB |
| Confidential Letter | Cover Letter(s) | 2015-02-03 | PDF 45.2 KB |
| DOC Letter | Cover Letter(s) | 2015-02-03 | PDF 29.4 KB |
| Modular Approval Letter | Cover Letter(s) | 2015-02-03 | PDF 26.2 KB |
| POA | Cover Letter(s) | 2015-02-03 | PDF 30.9 KB |
| Restricted band Declaration | Cover Letter(s) | 2015-02-03 | PDF 28.9 KB |
| RF Exposure Info | RF Exposure Info | 2015-08-18 | PDF 106.2 KB |
| Human Exposure | RF Exposure Info | 2015-02-03 | PDF 104.4 KB |
| Human exposure | RF Exposure Info | 2015-02-03 | PDF 104.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 29.3 KB | |
| Schematics Metadata only | Schematics | PDF 308.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 102 KB | |
| Operational Description Metadata only | Operational Description | PDF 100.7 KB | |
| Operational Description SDR Metadata only | SDR Software/Security Inf | PDF 91.5 KB | |
| Operational Description SDR Software Theory of Operation Metadata only | SDR Software/Security Inf | PDF 90.9 KB | |
| Operational Description Security Metadata only | Operational Description | PDF 22.6 KB | |
| Operational Description Software Security Statement Metadata only | Operational Description | PDF 21.6 KB | |
| Operational Description Theory of Operation Metadata only | Operational Description | PDF 91.5 KB | |
| Operational Description user interface Metadata only | Operational Description | PDF 46 KB |
Application Information
| Application ID | yP/2tlZ3f9F3bceIFZsZYg== |
|---|---|
| Final Action Date | 2015-08-18 |
| Application Purpose | Class III permissive change to software defined radio |
| Applicant FRN | 0004968939 |
| Model | ASA-AP702 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | ASA 5506-X WiFi Internal Module |
| Responsible Party | Samuel Kim, Manager, Engineering, samukim@cisco.com  , 408-527-1446 |
| Test Firm | Alex Chen, Sporton International Inc., alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/23/2015 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Single Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.97dBi and 3.89dBi in 2.4GHz and 5.2GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has 20MHz and 40MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| yP/2tlZ3f9F3bceIFZsZYg== | 2015-08-18 | Class III permissive change to software defined radio |
| Qo/TrlS0681N8lY2Ts+o0g== | 2015-02-03 | Original Equipment |
| 0P+HJTEeg7Dn0qLioG4b/A== | 2015-02-03 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application yP/2tlZ3f9F3bceIFZsZYg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/18/2015 Application Dated: 06/26/2015 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKASA-AP702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ASA 5506-X WiFi Internal Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 39 CC MO | 15E | 5180.0 - 5240.0 | 0.134 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.125 | ||
| CC MO | 15E | 5500.0 - 5580.0 | 0.14 | ||
| CC MO | 15E | 5660.0 - 5700.0 | 0.121 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.133 |
| Single Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.97dBi and 3.89dBi in 2.4GHz and 5.2GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has 20MHz and 40MHz bandwidth modes. |
| 39: | This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application yP/2tlZ3f9F3bceIFZsZYg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 08/18/2015 Application Dated: 06/26/2015 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKASA-AP702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ASA 5506-X WiFi Internal Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 39 CC MO | 15E | 5180.0 - 5240.0 | 0.134 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.125 | ||
| CC MO | 15E | 5500.0 - 5580.0 | 0.14 | ||
| CC MO | 15E | 5660.0 - 5700.0 | 0.121 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.133 |
| Single Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.97dBi and 3.89dBi in 2.4GHz and 5.2GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has 20MHz and 40MHz bandwidth modes. |
| 39: | This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/03/2015 Application Dated: 01/16/2015 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKASA-AP702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | ASA 5506-X WiFi Internal Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.117 |
| Single Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.97dBi and 3.89dBi in 2.4GHz and 5GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Qo/TrlS0681N8lY2Ts+o0g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 02/03/2015 Application Dated: 01/16/2015 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKASA-AP702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | ASA 5506-X WiFi Internal Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.117 |
| Single Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.97dBi and 3.89dBi in 2.4GHz and 5GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/03/2015 Application Dated: 01/16/2015 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKASA-AP702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ASA 5506-X WiFi Internal Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.134 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.133 |
| Single Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.97dBi and 3.89dBi in 2.4GHz and 5GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has 20MHz and 40MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 0P+HJTEeg7Dn0qLioG4b/A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 02/03/2015 Application Dated: 01/16/2015 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKASA-AP702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | ASA 5506-X WiFi Internal Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.134 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.133 |
| Single Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.97dBi and 3.89dBi in 2.4GHz and 5GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has 20MHz and 40MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |