FCC ID LDKAX5122118
Cisco Catalyst 9130AX Series Wi-Fi 6 Access Points
by Cisco Systems Inc
Grantee Code: LDK Product Code: AX5122118
Latest application date: 2022-10-18
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2022-10-18 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-05-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-05-24 |
| 5180-5240 MHz | Original Equipment | 2019-09-13 |
| 2402-2480 MHz | Original Equipment | 2019-09-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2020-03-12 | PDF 2.6 MB |
| Int Photos | Internal Photos | 2021-11-20 | PDF 1.5 MB |
| Int Photos | Internal Photos | 2020-03-12 | PDF 1.9 MB |
| Ext Photos | External Photos | 2020-03-12 | PDF 932.2 KB |
| FCC ID Label | ID Label/Location Info | 2022-10-18 | PDF 213.4 KB |
| DFS Setup Photos | Test Setup Photos | 2023-04-17 | PDF 928.8 KB |
| Setup Photos | Test Setup Photos | 2021-11-20 | PDF 750.1 KB |
| Setup Photos | Test Setup Photos | 2021-11-20 | PDF 942.6 KB |
| Setup Photos (Conducted) | Test Setup Photos | 2020-03-12 | PDF 385.4 KB |
| Setup Photos (Radiated) | Test Setup Photos | 2020-03-12 | PDF 234.7 KB |
| DFS Report Metadata only | Test Report | 2022-10-18 | PDF 4.7 MB |
| DFS Report Rev | Test Report | 2022-10-18 | PDF 4.7 MB |
| Test Report | Test Report | 2021-05-24 | PDF 1.4 MB |
| Test Report | Test Report | 2021-05-24 | PDF 1.3 MB |
| Cisco 17873174 2.4 GHz XOR Report | Test Report | 2019-09-13 | PDF 2.4 MB |
| Cisco 17873175 2.4 GHz Chillwave Report | Test Report | 2019-09-13 | PDF 1.7 MB |
| Cisco 17873176 5150-5250 Chillwave (UNII-1) Report | Test Report | 2019-09-13 | PDF 805.9 KB |
| Cisco 17873177 5250-5350 Chillwave (UNII-2) Report | Test Report | 2019-09-13 | PDF 831 KB |
| Cisco 17873179 5470-5725 Chillwave (UNII-2C) Report | Test Report | 2019-09-13 | PDF 955.7 KB |
| Cisco 17873182 5725-5850 Chillwave (UNII-3) Report | Test Report | 2019-09-13 | PDF 1.2 MB |
| Cisco 18179347 DFS Report | Test Report | 2019-09-13 | PDF 2.6 MB |
| Cisco R1906171-01 XOR 4x4 FCC UNII1 (Conducted) | Test Report | 2019-09-13 | PDF 1.4 MB |
| Cisco R1906171-02 XOR 4x4 FCC UNII2A (Conducted) | Test Report | 2019-09-13 | PDF 1,018.7 KB |
| Cisco R1906171-03 XOR 4x4 FCC UNII2C (Conducted) | Test Report | 2019-09-13 | PDF 1.1 MB |
| Cisco R1906171-04 XOR 4x4 FCC UNII3 (Conducted) | Test Report | 2019-09-13 | PDF 1.5 MB |
| Cisco R1906171-05 Regular 4x4 FCC UNII1 (Conducted) | Test Report | 2019-09-13 | PDF 1.5 MB |
| Cisco R1906171-06 Regular 4x4 FCC UNII2A (Conducted) | Test Report | 2019-09-13 | PDF 1,019.9 KB |
| Cisco R1906171-07 Regular 4x4 FCC UNII2C (Conducted) | Test Report | 2019-09-13 | PDF 1.1 MB |
| Cisco R1906171-08 Regular 4x4 FCC UNII3 (Conducted) | Test Report | 2019-09-13 | PDF 1.5 MB |
| Cisco R1906171-09 5 GHz 8x8 FCC UNII1 (Conducted) | Test Report | 2019-09-13 | PDF 4.4 MB |
| Cisco R1906171-10 5 GHz 8x8 FCC UNII2A (Conducted) | Test Report | 2019-09-13 | PDF 4 MB |
| Cisco R1906171-11 5 GHz 8x8 FCC UNII2CB (Conducted) | Test Report | 2019-09-13 | PDF 5.1 MB |
| Cisco R1906171-12 5 GHz 8x8 FCC UNII3 (Conducted) | Test Report | 2019-09-13 | PDF 4.6 MB |
| Cisco R1906171-13 5 GHz 8x8 FCC 80+80 (Conducted) | Test Report | 2019-09-13 | PDF 4.5 MB |
| Cisco RLK190621001-00A Wi-Fi 5 GHz Regular 4Tx (Radiated) | Test Report | 2019-09-13 | PDF 5.5 MB |
| Cisco RLK190621001-00B Wi-Fi 5 GHz XOR 4Tx (Radiated) | Test Report | 2019-09-13 | PDF 5.6 MB |
| Cisco RLK190621001-00C Wi-Fi 5 GHz 8Tx (Radiated) | Test Report | 2019-09-13 | PDF 3 MB |
| Cisco RLK190621001-00D Wi-Fi 5 GHz (Co-location) | Test Report | 2019-09-13 | PDF 1.7 MB |
| Cisco RLK190621001-00E FCC Part 15.247 (Radiated) | Test Report | 2019-09-13 | PDF 1.1 MB |
| Test Report (BLE) | Test Report | 2019-09-13 | PDF 1.5 MB |
| C2PC Letter Metadata only | Cover Letter(s) | 2022-10-18 | PDF 56.3 KB |
| C2PC Letter Rev | Cover Letter(s) | 2022-10-18 | PDF 225.8 KB |
| Confidential Letter | Cover Letter(s) | 2022-10-18 | PDF 95 KB |
| C2PC Letter | Cover Letter(s) | 2021-05-24 | PDF 74 KB |
| Confidential Letter | Cover Letter(s) | 2021-05-24 | PDF 130.7 KB |
| Authorization Signature | Cover Letter(s) | 2019-09-13 | PDF 48.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2019-09-13 | PDF 17.4 KB |
| RF Exposure | RF Exposure Info | 2019-09-13 | PDF 45.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 648.9 KB | |
| Schematics Metadata only | Schematics | PDF 1.5 MB | |
| Schematics Metadata only | Schematics | PDF 1.3 MB | |
| DFS Theory of Operation Metadata only | Operational Description | PDF 54 KB | |
| DFS Theory of Operation Rev Metadata only | Operational Description | PDF 62.8 KB | |
| Opeation Description Metadata only | Operational Description | PDF 783.3 KB | |
| Operation Description Metadata only | Operational Description | PDF 783.3 KB | |
| PAG Re-Use Request Letter Metadata only | Operational Description | PDF 33.4 KB | |
| PAG Re-use Declaration Metadata only | Operational Description | PDF 45.1 KB | |
| Software Security Declaration Metadata only | Operational Description | PDF 30.4 KB | |
| Software Security Description Metadata only | Operational Description | PDF 82.3 KB |
Application Information
| Application ID | 1Ns0XA2nIgt5ihekN70jqA== |
|---|---|
| Final Action Date | 2022-10-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004968939 |
| Model | AX5122118 |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Cisco Catalyst 9130AX Series Wi-Fi 6 Access Points |
| Responsible Party | Samuel Kim, Manager, Engineering, samukim@cisco.com  , 408-527-1446 |
| Test Firm | Gerald Thorpe, Cisco Systems, Inc., gthorpe@cisco.com , 408-525-7602 |
| TCB Email | bacl.regulatory@baclcorp.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/09/2023 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change described in this filing. Output power listed is conducted. Device supports 20/40/80/80+80 MHz bandwidth modes and 8x8 or 4x4 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 1Ns0XA2nIgt5ihekN70jqA== | 2022-10-18 | Class II permissive change or modification of presently authorized equipment |
| pebkfRe5q/jfltqRGoDr1w== | 2021-05-24 | Class II permissive change or modification of presently authorized equipment |
| OOuWjrSLfOjiYfydycfNOQ== | 2021-05-24 | Class II permissive change or modification of presently authorized equipment |
| s28fLM3v8lewii1tsc/kBQ== | 2019-09-13 | Original Equipment |
| jyijj+1hhSTNQGtGfo8G9w== | 2019-09-13 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application s28fLM3v8lewii1tsc/kBQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 09/13/2019 Application Dated: 09/13/2019 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKAX5122118 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst 9130AX Series Wi-Fi 6 Access Points |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.35 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.19 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.22 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2 | ||
| CC MO ND | 15E | 5510.0 - 5710.0 | 0.2 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.38 |
| Output power listed is conducted. Device supports 20/40/80/80+80 MHz bandwidth modes and 8x8 or 4x4 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application s28fLM3v8lewii1tsc/kBQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 09/13/2019 Application Dated: 09/13/2019 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKAX5122118 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst 9130AX Series Wi-Fi 6 Access Points |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.35 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.19 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.22 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2 | ||
| CC MO ND | 15E | 5510.0 - 5710.0 | 0.2 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.38 |
| Output power listed is conducted. Device supports 20/40/80/80+80 MHz bandwidth modes and 8x8 or 4x4 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 05/24/2021 Application Dated: 05/24/2021 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKAX5122118 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst 9124AX Series Wi-Fi 6 Outdoor Access Points |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.35 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.19 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.22 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2 | ||
| CC MO ND | 15E | 5510.0 - 5710.0 | 0.2 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.38 |
| Class II Permissive Change described in this filing. Output power listed is conducted. Device supports 20/40/80/80+80 MHz bandwidth modes and 8x8 or 4x4 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application pebkfRe5q/jfltqRGoDr1w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 05/24/2021 Application Dated: 05/24/2021 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKAX5122118 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst 9124AX Series Wi-Fi 6 Outdoor Access Points |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.35 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.19 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.22 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2 | ||
| CC MO ND | 15E | 5510.0 - 5710.0 | 0.2 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.38 |
| Class II Permissive Change described in this filing. Output power listed is conducted. Device supports 20/40/80/80+80 MHz bandwidth modes and 8x8 or 4x4 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 05/24/2021 Application Dated: 05/24/2021 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKAX5122118 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Catalyst 9130AX Series Wi-Fi 6 Access Points |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.23 |
| Class II Permissive Change described in this filing. Output power listed is conducted. Device supports 20 MHz bandwidth and 4x4 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application OOuWjrSLfOjiYfydycfNOQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 05/24/2021 Application Dated: 05/24/2021 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKAX5122118 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Catalyst 9130AX Series Wi-Fi 6 Access Points |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.23 |
| Class II Permissive Change described in this filing. Output power listed is conducted. Device supports 20 MHz bandwidth and 4x4 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 09/13/2019 Application Dated: 09/13/2019 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKAX5122118 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Catalyst 9130AX Series Wi-Fi 6 Access Points |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.23 |
| Output power listed is conducted. Device supports 20 MHz bandwidth and 4x4 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application jyijj+1hhSTNQGtGfo8G9w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 09/13/2019 Application Dated: 09/13/2019 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKAX5122118 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Catalyst 9130AX Series Wi-Fi 6 Access Points |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.23 |
| Output power listed is conducted. Device supports 20 MHz bandwidth and 4x4 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 10/18/2022 Application Dated: 08/13/2022 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKAX5122118 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst 9130AX Series Wi-Fi 6 Access Points |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.35 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.19 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.22 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2 | ||
| CC MO ND | 15E | 5510.0 - 5710.0 | 0.2 | ||
| CC MO ND | 15E | 5745.0 - 5825.0 | 0.38 |
| Class II Permissive Change described in this filing. Output power listed is conducted. Device supports 20/40/80/80+80 MHz bandwidth modes and 8x8 or 4x4 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 1Ns0XA2nIgt5ihekN70jqA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 10/18/2022 Application Dated: 08/13/2022 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKAX5122118 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst 9130AX Series Wi-Fi 6 Access Points |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.35 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.19 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.22 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2 | ||
| CC MO ND | 15E | 5510.0 - 5710.0 | 0.2 | ||
| CC MO ND | 15E | 5745.0 - 5825.0 | 0.38 |
| Class II Permissive Change described in this filing. Output power listed is conducted. Device supports 20/40/80/80+80 MHz bandwidth modes and 8x8 or 4x4 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |