FCC ID LDKC11011757
Cisco 802.11a/g/n/ac Radio Module
by Cisco Systems Inc
Grantee Code: LDK Product Code: C11011757
Latest application date: 2019-05-28
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-05-28 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2019-05-28 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2018-10-23 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2018-10-23 |
| 5180-5240 MHz | Original Equipment | 2018-08-31 |
| 2412-2462 MHz | Original Equipment | 2018-08-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users manual | Users Manual | 2019-02-27 | PDF 4.3 MB |
| Users Manual | Users Manual | 2019-01-12 | PDF 4.3 MB |
| Internal Photo | Internal Photos | 2019-11-11 | PDF 752.6 KB |
| Internal Photos | Internal Photos | 2019-04-21 | PDF 2.8 MB |
| Internal Photos | Internal Photos | 2019-02-27 | PDF 6 MB |
| Internal Photos (module) | Internal Photos | 2019-01-12 | PDF 6 MB |
| External Photo | External Photos | 2019-11-11 | PDF 331.7 KB |
| External Photos | External Photos | 2019-04-21 | PDF 1.1 MB |
| External Photos | External Photos | 2019-02-27 | PDF 814.7 KB |
| External Photos (host) | External Photos | 2019-01-12 | PDF 814.7 KB |
| Label | ID Label/Location Info | 2018-08-31 | PDF 389 KB |
| Product Label | ID Label/Location Info | 2018-08-31 | PDF 389 KB |
| Test Setup Photo | Test Setup Photos | 2019-11-11 | PDF 302.2 KB |
| Test Setup Photos | Test Setup Photos | 2019-02-27 | PDF 458.9 KB |
| DFS Test Report | Test Report | 2019-05-28 | PDF 3.6 MB |
| DTS Test Report | Test Report | 2019-05-28 | PDF 1.3 MB |
| UNII Test Report | Test Report | 2019-05-28 | PDF 2 MB |
| C1109-4PLTE2PWB 5150MHz-5250MHz FCC Radio Report | Test Report | 2018-10-23 | PDF 4.3 MB |
| C1109-4PLTE2PWB 5250MHz-5350MHz FCC Radio Report | Test Report | 2018-10-23 | PDF 4.2 MB |
| C1109-4PLTE2PWB 5470MHz-5725MHz FCC Radio Report | Test Report | 2018-10-23 | PDF 3.7 MB |
| C1109-4PLTE2PWB 5725MHz-5850MHz FCC Radio Report | Test Report | 2018-10-23 | PDF 4.8 MB |
| C1109-4PLTE2PWB_FCC_DFS_Master_Device_Report | Test Report | 2018-10-23 | PDF 4.4 MB |
| DTS RF Report | Test Report | 2018-10-23 | PDF 4.6 MB |
| 5G UNII 3-B Test Report | Test Report | 2018-08-31 | PDF 2.6 MB |
| 5G-UNII-1-B Test Report | Test Report | 2018-08-31 | PDF 2 MB |
| 5G-UNII-2-B Test Report | Test Report | 2018-08-31 | PDF 2 MB |
| 5G-UNII-2ext-B Test Report | Test Report | 2018-08-31 | PDF 2.2 MB |
| C1101 FCC Collocated RSE Report | Test Report | 2018-08-31 | PDF 965.3 KB |
| Co-location Report | Test Report | 2018-08-31 | PDF 965.3 KB |
| DTS RF report | Test Report | 2018-08-31 | PDF 2.5 MB |
| Attestation Letter | Attestation Statements | 2018-08-31 | PDF 119.1 KB |
| Letter of Attestation | Attestation Statements | 2018-08-31 | PDF 119.1 KB |
| Modular Approval Letter | Attestation Statements | 2018-08-31 | PDF 38.4 KB |
| POA | Attestation Statements | 2018-08-31 | PDF 47.2 KB |
| WIFI Channel 12 and 13 Declaration Letter | Attestation Statements | 2018-08-31 | PDF 80.4 KB |
| Authorization Letter | Cover Letter(s) | 2019-05-28 | PDF 47.2 KB |
| Class II Permissive Change Request Letter | Cover Letter(s) | 2019-05-28 | PDF 118.3 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2019-05-28 | PDF 132.7 KB |
| Project and Product Certification Representative Authorization Letter | Cover Letter(s) | 2019-05-28 | PDF 59.6 KB |
| Class II Permissive Change Request Letter | Cover Letter(s) | 2018-10-23 | PDF 117.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2018-10-23 | PDF 131.9 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2018-10-23 | PDF 131.9 KB |
| Letter of authorization POA | Cover Letter(s) | 2018-10-23 | PDF 114.6 KB |
| Permissive Change Request Letter | Cover Letter(s) | 2018-10-23 | PDF 117.1 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2018-10-23 | PDF 58.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2018-08-31 | PDF 31.6 KB |
| Modular Approval Letter | Cover Letter(s) | 2018-08-31 | PDF 38.4 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2018-08-31 | PDF 25.9 KB |
| MPE Calcualtion | RF Exposure Info | 2019-05-28 | PDF 103 KB |
| MPE Calculation | RF Exposure Info | 2019-05-28 | PDF 103 KB |
| MPE Report | RF Exposure Info | 2018-10-23 | PDF 263.8 KB |
| MPE Calculation Report | RF Exposure Info | 2018-08-31 | PDF 138.7 KB |
| MPE Report | RF Exposure Info | 2018-08-31 | PDF 138.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 256.3 KB | |
| Schematics Metadata only | Schematics | PDF 715.8 KB | |
| Operational Description Metadata only | Operational Description | PDF 163.2 KB | |
| SW Security Declaration Letter Metadata only | Operational Description | PDF 636.4 KB | |
| Software Security Declaration Metadata only | Operational Description | PDF 155.4 KB |
Application Information
| Application ID | vx7qj3WfAMIn0S0gJ7cfGA== |
|---|---|
| Final Action Date | 2019-05-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004968939 |
| Model | C11011757 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Cisco 802.11a/g/n/ac Radio Module |
| Responsible Party | Gerard Thorpe, Manager, Engineering, gthorpe@cisco.com  , 408-527-7097 |
| Test Firm | Gerald Thorpe, Cisco Systems, Inc., gthorpe@cisco.com , 408-525-7602 |
| TCB Email | tcb@siemic.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 11/11/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | C2PC to add host model: C1121X-8PLTEPWB Original grant comment: Limited Modular Approval intended for use only in Cisco platforms. The ISR-AP1101AC module is not intended for OEM integrators and/or end-users. This grant is valid only when the module is installed in the end-product covered in this filing. Output power listed is the maximum combined conducted output power. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Device is a 2x2 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vx7qj3WfAMIn0S0gJ7cfGA== | 2019-05-28 | Class II permissive change or modification of presently authorized equipment |
| 9GLuxm9bapeXEpojiwGs7g== | 2019-05-28 | Class II permissive change or modification of presently authorized equipment |
| rvcm6b35GqObeM8d9AmNtg== | 2018-10-23 | Class II permissive change or modification of presently authorized equipment |
| crZ7aDhBEpXD01S+ilSZGA== | 2018-10-23 | Class II permissive change or modification of presently authorized equipment |
| MQkleHGR1khcjJqIaIh7Aw== | 2018-08-31 | Original Equipment |
| DKSelQAj6bPs3mQIkt7Wgw== | 2018-08-31 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application vx7qj3WfAMIn0S0gJ7cfGA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SIEMIC, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/28/2019 Application Dated: 05/15/2019 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Gerard Thorpe , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKC11011757 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco 802.11a/g/n/ac Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.035 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.035 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.041 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.043 |
| C2PC to add host model: C1121X-8PLTEPWB Original grant comment: Limited Modular Approval intended for use only in Cisco platforms. The ISR-AP1101AC module is not intended for OEM integrators and/or end-users. This grant is valid only when the module is installed in the end-product covered in this filing. Output power listed is the maximum combined conducted output power. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Device is a 2x2 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application vx7qj3WfAMIn0S0gJ7cfGA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 05/28/2019 Application Dated: 05/15/2019 |
| Attention: Gerard Thorpe , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKC11011757 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco 802.11a/g/n/ac Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.035 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.035 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.041 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.043 |
| C2PC to add host model: C1121X-8PLTEPWB Original grant comment: Limited Modular Approval intended for use only in Cisco platforms. The ISR-AP1101AC module is not intended for OEM integrators and/or end-users. This grant is valid only when the module is installed in the end-product covered in this filing. Output power listed is the maximum combined conducted output power. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Device is a 2x2 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 10/23/2018 Application Dated: 10/19/2018 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKC11011757 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco 802.11a/g/n/ac Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.035 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.035 | ||
| CO MO ND | 15E | 5500.0 - 5700.0 | 0.041 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.043 |
| C2PC to add host model: C1109-4PLTE2PWB Original grant comment: Limited Modular Approval intended for use only in Cisco platforms. The ISR-AP1101AC module is not intended for OEM integrators and/or end-users. This grant is valid only when the module is installed in the end-product covered in this filing. Output power listed is the maximum combined conducted output power. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Device is a 2x2 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CO: | Transmitter meets technical requirements only for use at coast stations. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application rvcm6b35GqObeM8d9AmNtg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 10/23/2018 Application Dated: 10/19/2018 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKC11011757 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco 802.11a/g/n/ac Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.035 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.035 | ||
| CO MO ND | 15E | 5500.0 - 5700.0 | 0.041 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.043 |
| C2PC to add host model: C1109-4PLTE2PWB Original grant comment: Limited Modular Approval intended for use only in Cisco platforms. The ISR-AP1101AC module is not intended for OEM integrators and/or end-users. This grant is valid only when the module is installed in the end-product covered in this filing. Output power listed is the maximum combined conducted output power. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Device is a 2x2 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CO: | Transmitter meets technical requirements only for use at coast stations. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 08/31/2018 Application Dated: 07/16/2018 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKC11011757 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco 802.11a/g/n/ac Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.035 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.035 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.041 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.043 |
| Limited Modular Approval intended for use only in Cisco platforms. The ISR-AP1101AC module is not intended for OEM integrators and/or end-users. This grant is valid only when the module is installed in the end-product covered in this filing. Output power listed is the maximum combined conducted output power. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Device is a 2x2 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application MQkleHGR1khcjJqIaIh7Aw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 08/31/2018 Application Dated: 07/16/2018 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKC11011757 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco 802.11a/g/n/ac Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.035 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.035 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.041 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.043 |
| Limited Modular Approval intended for use only in Cisco platforms. The ISR-AP1101AC module is not intended for OEM integrators and/or end-users. This grant is valid only when the module is installed in the end-product covered in this filing. Output power listed is the maximum combined conducted output power. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Device is a 2x2 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 08/31/2018 Application Dated: 08/31/2018 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKC11011757 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco 802.11a/g/n/ac Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.1 |
| Limited Modular Approval intended for use only in Cisco platforms. This grant is valid only when the module is installed in the end-product covered in this filing. The ISR-AP1101AC is not intended for OEM integrators and/or end-users. Output power listed is the maximum combined conducted output power. Device is a 2x2 MIMO configuration as described in this filing. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application DKSelQAj6bPs3mQIkt7Wgw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 08/31/2018 Application Dated: 08/31/2018 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKC11011757 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco 802.11a/g/n/ac Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.1 |
| Limited Modular Approval intended for use only in Cisco platforms. This grant is valid only when the module is installed in the end-product covered in this filing. The ISR-AP1101AC is not intended for OEM integrators and/or end-users. Output power listed is the maximum combined conducted output power. Device is a 2x2 MIMO configuration as described in this filing. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 10/23/2018 Application Dated: 10/23/2018 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKC11011757 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco 802.11a/g/n/ac Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.1 |
| C2PC to add host model: C1109-4PLTE2PWB Original grant comment: Limited Modular Approval intended for use only in Cisco platforms. This grant is valid only when the module is installed in the end-product covered in this filing. The ISR-AP1101AC is not intended for OEM integrators and/or end-users. Output power listed is the maximum combined conducted output power. Device is a 2x2 MIMO configuration as described in this filing. This device has 20MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application crZ7aDhBEpXD01S+ilSZGA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 10/23/2018 Application Dated: 10/23/2018 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKC11011757 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco 802.11a/g/n/ac Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.1 |
| C2PC to add host model: C1109-4PLTE2PWB Original grant comment: Limited Modular Approval intended for use only in Cisco platforms. This grant is valid only when the module is installed in the end-product covered in this filing. The ISR-AP1101AC is not intended for OEM integrators and/or end-users. Output power listed is the maximum combined conducted output power. Device is a 2x2 MIMO configuration as described in this filing. This device has 20MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SIEMIC, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/28/2019 Application Dated: 05/15/2019 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Gerard Thorpe , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKC11011757 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco 802.11a/g/n/ac Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.1 |
| C2PC to add host model: C1121X-8PLTEPWB Original grant comment: Limited Modular Approval intended for use only in Cisco platforms. This grant is valid only when the module is installed in the end-product covered in this filing. The ISR-AP1101AC is not intended for OEM integrators and/or end-users. Output power listed is the maximum combined conducted output power. Device is a 2x2 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 9GLuxm9bapeXEpojiwGs7g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 05/28/2019 Application Dated: 05/15/2019 |
| Attention: Gerard Thorpe , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKC11011757 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco 802.11a/g/n/ac Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.1 |
| C2PC to add host model: C1121X-8PLTEPWB Original grant comment: Limited Modular Approval intended for use only in Cisco platforms. This grant is valid only when the module is installed in the end-product covered in this filing. The ISR-AP1101AC is not intended for OEM integrators and/or end-users. Output power listed is the maximum combined conducted output power. Device is a 2x2 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |