FCC ID LDKESW6301
Outdoor Access Point
by Cisco Systems Inc
Grantee Code: LDK Product Code: ESW6301
Latest application date: 2019-10-08
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: LDK102103 Grant Date: 12/09/2016 | 2019-10-08 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: LDK102103 Grant Date: 12/09/2016 | 2019-10-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Ext Photos | External Photos | 2019-10-08 | PDF 247.5 KB |
| Label | ID Label/Location Info | 2019-10-08 | PDF 301 KB |
| Cover Letter | Cover Letter(s) | 2019-10-08 | PDF 376.2 KB |
Application Information
| Application ID | eTPRC/SnPtn5ppMJiwB2Lg== |
|---|---|
| Final Action Date | 2019-10-08 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: LDK102103 Grant Date: 12/09/2016 |
| Applicant FRN | 0004968939 |
| Model | ESW6301 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Outdoor Access Point |
| Responsible Party | Samuel Kim, Manager, Engineering, samukim@cisco.com  , 408-527-1446 |
| Technical Contact | Adam Walb, Cisco Systems, awalb@cisco.com , 408 526 4124 |
| Test Firm | David Spencer, TUV Rheinland of North America Inc., dspencer@us.tuv.com  , (925) 249-9123 x2116 |
| TCB Email | tcb-hotline@tuv.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device is capableof 2x2 MIMO operation. Output power is maximum combined conducted power. The documented antennas with 8dBi and more gain used for this transmitter must be installed to provide a separation distance of at least 60 cm from all persons, those with less than dBi at least 25 cm. The specified antennas must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| eTPRC/SnPtn5ppMJiwB2Lg== | 2019-10-08 | Change in identification of presently authorized equipment. Original FCC ID: LDK102103 Grant Date: 12/09/2016 |
| /zqkVS49/wBY7Hp6FixOmA== | 2019-10-08 | Change in identification of presently authorized equipment. Original FCC ID: LDK102103 Grant Date: 12/09/2016 |
Equipment Authorization
Grants
TCB Grant - Application eTPRC/SnPtn5ppMJiwB2Lg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 10/08/2019 Application Dated: 10/08/2019 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKESW6301 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Outdoor Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO ND | 15E | 5180.0 - 5240.0 | 0.479 | ||
| 36 CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| 36 CC MO ND | 15E | 5550.0 - 5720.0 | 0.246 | ||
| 36 CC MO ND | 15E | 5745.0 - 5825.0 | 0.49 |
| This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device is capableof 2x2 MIMO operation. Output power is maximum combined conducted power. The documented antennas with 8dBi and more gain used for this transmitter must be installed to provide a separation distance of at least 60 cm from all persons, those with less than dBi at least 25 cm. The specified antennas must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application eTPRC/SnPtn5ppMJiwB2Lg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 10/08/2019 Application Dated: 10/08/2019 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKESW6301 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Outdoor Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO ND | 15E | 5180.0 - 5240.0 | 0.479 | ||
| 36 CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| 36 CC MO ND | 15E | 5550.0 - 5720.0 | 0.246 | ||
| 36 CC MO ND | 15E | 5745.0 - 5825.0 | 0.49 |
| This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device is capableof 2x2 MIMO operation. Output power is maximum combined conducted power. The documented antennas with 8dBi and more gain used for this transmitter must be installed to provide a separation distance of at least 60 cm from all persons, those with less than dBi at least 25 cm. The specified antennas must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 10/08/2019 Application Dated: 10/08/2019 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKESW6301 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Outdoor Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15C | 2412.0 - 2462.0 | 0.6 |
| This device has 20 MHz and 40 MHz bandwidth modes. This device is capable of 2x2 MIMO operation. Output power is maximum combined conducted power. The documented antennas with 8dBi and more gain used for this transmitter must be installed to provide a separation distance of at least 60 cm from all persons, those with less than 8dBi at least 25 cm. The specified antennas must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application /zqkVS49/wBY7Hp6FixOmA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 10/08/2019 Application Dated: 10/08/2019 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKESW6301 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Outdoor Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15C | 2412.0 - 2462.0 | 0.6 |
| This device has 20 MHz and 40 MHz bandwidth modes. This device is capable of 2x2 MIMO operation. Output power is maximum combined conducted power. The documented antennas with 8dBi and more gain used for this transmitter must be installed to provide a separation distance of at least 60 cm from all persons, those with less than 8dBi at least 25 cm. The specified antennas must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |