FCC ID LDKIW3702
Cisco Industrial Wireless 802.11ac Dual Band Access Point
by Cisco Systems Inc
Grantee Code: LDK Product Code: IW3702
Latest application date: 2016-03-09
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-03-09 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2015-07-20 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2015-07-20 |
| 5180-5240 MHz | Class III permissive change to software defined radio | 2015-06-26 |
| 2412-2462 MHz | Class III permissive change to software defined radio | 2015-06-24 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: LDK102087P Grant Date: 07/11/2014 | 2015-06-02 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: LDK102087P Grant Date: 06/05/2014 | 2015-06-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Draft Installation Guide | Users Manual | 2015-07-20 | PDF 3.1 MB |
| Draft Installation Guide addendum | Users Manual | 2015-07-20 | PDF 33.9 KB |
| Installation Guide | Users Manual | 2015-07-20 | PDF 3.1 MB |
| Installation Guide amendment | Users Manual | 2015-07-20 | PDF 33.9 KB |
| Users Manual | Users Manual | 2015-07-17 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2015-09-03 | PDF 60.7 KB |
| External Photos | External Photos | 2015-09-03 | PDF 205.3 KB |
| External Photos | External Photos | 2015-07-17 | PDF 1.6 MB |
| Label Information Rev 2 | ID Label/Location Info | 2015-06-02 | PDF 400.5 KB |
| Test Set- Up Photos | Test Setup Photos | 2015-07-20 | PDF 620.7 KB |
| set-up photos | Test Setup Photos | 2015-07-20 | PDF 620.7 KB |
| DFS Report | Test Report | 2016-03-09 | PDF 2.8 MB |
| Test Report 5690-5720 MHz Ant 13 dBi | Test Report | 2016-03-09 | PDF 3.2 MB |
| Test Report 5690-5720 MHz Ant 4 dBi | Test Report | 2016-03-09 | PDF 3.8 MB |
| Test Report 5690-5720 MHz Ant 6 dBi | Test Report | 2016-03-09 | PDF 3.6 MB |
| Test Report 5690-5720 MHz Ant 7 dBi | Test Report | 2016-03-09 | PDF 3.6 MB |
| Test Report 5745-5825 MHz Ant 13 dBi | Test Report | 2016-03-09 | PDF 4.2 MB |
| Test Report 5745-5825 MHz Ant 4 dBi | Test Report | 2016-03-09 | PDF 4.2 MB |
| Test Report 5745-5825 MHz Ant 6 dBi | Test Report | 2016-03-09 | PDF 4.2 MB |
| Test Report 5745-5825 MHz Ant 7 dBi | Test Report | 2016-03-09 | PDF 4.2 MB |
| 2.4GHZ c2pc EMC Report | Test Report | 2015-07-20 | PDF 4.5 MB |
| 5.8GHZ c2pc EMC Report part 1 | Test Report | 2015-07-20 | PDF 2.9 MB |
| 5.8GHZ c2pc EMC Report part 2 | Test Report | 2015-07-20 | PDF 4.5 MB |
| NII EMC Report Band 1 part 1 | Test Report | 2015-07-20 | PDF 4.4 MB |
| NII EMC Report Band 1 part 2 | Test Report | 2015-07-20 | PDF 5.7 MB |
| NII EMC Report Band 2A part 1 | Test Report | 2015-07-20 | PDF 4.1 MB |
| NII EMC Report Band 2A part 2 | Test Report | 2015-07-20 | PDF 5.7 MB |
| NII EMC Report Band 2C part 1 | Test Report | 2015-07-20 | PDF 3.5 MB |
| NII EMC Report Band 2C part 2 | Test Report | 2015-07-20 | PDF 1.4 MB |
| NII EMC Report Band 2C part 3 | Test Report | 2015-07-20 | PDF 5.2 MB |
| LDK102087P NII test report 1 | Test Report | 2015-06-26 | PDF 5.7 MB |
| LDK102087P NII test report 10 | Test Report | 2015-06-26 | PDF 2.5 MB |
| LDK102087P NII test report 11 | Test Report | 2015-06-26 | PDF 5.2 MB |
| LDK102087P NII test report 12 | Test Report | 2015-06-26 | PDF 2.9 MB |
| LDK102087P NII test report 13 | Test Report | 2015-06-26 | PDF 5.5 MB |
| LDK102087P NII test report 14 | Test Report | 2015-06-26 | PDF 3.3 MB |
| LDK102087P NII test report 15 | Test Report | 2015-06-26 | PDF 5 MB |
| LDK102087P NII test report 16 | Test Report | 2015-06-26 | PDF 2.7 MB |
| LDK102087P NII test report 2 | Test Report | 2015-06-26 | PDF 2.7 MB |
| LDK102087P NII test report 3 | Test Report | 2015-06-26 | PDF 3.5 MB |
| LDK102087P NII test report 4 | Test Report | 2015-06-26 | PDF 5.1 MB |
| LDK102087P NII test report 5 | Test Report | 2015-06-26 | PDF 5.3 MB |
| LDK102087P NII test report 6 | Test Report | 2015-06-26 | PDF 2.9 MB |
| LDK102087P NII test report 7 | Test Report | 2015-06-26 | PDF 5.5 MB |
| LDK102087P NII test report 8 | Test Report | 2015-06-26 | PDF 3.1 MB |
| LDK102087P NII test report 9 | Test Report | 2015-06-26 | PDF 4.6 MB |
| LDK102087P DTS test report 1 | Test Report | 2015-06-24 | PDF 4.1 MB |
| LDK102087P DTS test report 2 | Test Report | 2015-06-24 | PDF 4.3 MB |
| LDK102087P DTS test report 3 | Test Report | 2015-06-24 | PDF 4.3 MB |
| LDK102087P DTS test report 4 | Test Report | 2015-06-24 | PDF 4.5 MB |
| LDK102087P DTS test report 5 | Test Report | 2015-06-24 | PDF 5.1 MB |
| LDK102087P DTS test report 6 | Test Report | 2015-06-24 | PDF 5.1 MB |
| LDK102087P DTS test report 7 | Test Report | 2015-06-24 | PDF 4.1 MB |
| DFS Attestation | Attestation Statements | 2015-06-02 | PDF 31.3 KB |
| SDR Attestation | Attestation Statements | 2015-06-02 | PDF 31.4 KB |
| Authorization Letter | Cover Letter(s) | 2016-03-09 | PDF 27.5 KB |
| CIIPC Letter | Cover Letter(s) | 2016-03-09 | PDF 17.1 KB |
| DFS Declaration Letter | Cover Letter(s) | 2016-03-09 | PDF 19.4 KB |
| Authorization Letter | Cover Letter(s) | 2015-07-20 | PDF 52.4 KB |
| CIIPC Cover Letter Metadata only | Cover Letter(s) | 2015-07-20 | PDF 35.2 KB |
| Confidentiality request | Cover Letter(s) | 2015-07-20 | PDF 76.9 KB |
| c2pc Cover Letter | Cover Letter(s) | 2015-07-20 | PDF 35.2 KB |
| Confidentiality Request v2 | Cover Letter(s) | 2015-06-26 | PDF 76.9 KB |
| Cover Letter v4 | Cover Letter(s) | 2015-06-26 | PDF 30.8 KB |
| Cover Letter v2 Metadata only | Cover Letter(s) | 2015-06-24 | PDF 33.8 KB |
| Change of ID Cover Letter Revised 052715 | Cover Letter(s) | 2015-06-02 | PDF 38.8 KB |
| Confidentiality Request | Cover Letter(s) | 2015-06-02 | PDF 75.2 KB |
| Cover Letter Signatories | Cover Letter(s) | 2015-06-02 | PDF 52.4 KB |
| Signatory Letter | Cover Letter(s) | 2015-06-02 | PDF 52.4 KB |
| RF Exposure | RF Exposure Info | 2016-03-09 | PDF 107.7 KB |
| MPE Report | RF Exposure Info | 2015-07-20 | PDF 48.4 KB |
| RF Exposure Exhibit | RF Exposure Info | 2015-07-20 | PDF 48.4 KB |
| NII SW Security Attestation Metadata only | Operational Description | PDF 119.2 KB | |
| PAG Approved Metadata only | Operational Description | PDF 85.6 KB | |
| SW Security Metadata only | Operational Description | PDF 119.2 KB | |
| Software Security Info Metadata only | Operational Description | PDF 118.5 KB | |
| FCC Acceptance of new SDS Metadata only | SDR Software/Security Inf | PDF 135.2 KB | |
| Regulatory Domain Unification Theory of Operation Metadata only | SDR Software/Security Inf | PDF 1.1 MB | |
| SDR Security Description Guide v3 Metadata only | SDR Software/Security Inf | PDF 180.5 KB |
Application Information
| Application ID | ufhRyNTB3rwyxshzWdswWg== |
|---|---|
| Final Action Date | 2016-03-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004968939 |
| Model | IW3702 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Cisco Industrial Wireless 802.11ac Dual Band Access Point |
| Responsible Party | Samuel Kim, Manager, Engineering, samukim@cisco.com  , 408-527-1446 |
| Test Firm | Gerald Thorpe, Cisco Systems, Inc., gthorpe@cisco.com , 408-525-7602 |
| TCB Email | bacl.regulatory@baclcorp.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change documented in this filing. Output power is conducted. This device has 20 MHz, 40 MHz and 80 MHz BW modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide minimum separation distances as specified in this filing from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This device must be professionally installed. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ufhRyNTB3rwyxshzWdswWg== | 2016-03-09 | Class II permissive change or modification of presently authorized equipment |
| v+Wu/YAKD/haHqjP8YhRVg== | 2015-07-20 | Class II permissive change or modification of presently authorized equipment |
| PRdwisLvYxheooNqvFZ1Ug== | 2015-07-20 | Class II permissive change or modification of presently authorized equipment |
| bSmzMz/pEQJRmd9KUx+HuQ== | 2015-06-26 | Class III permissive change to software defined radio |
| Bj2KSYa1UVc/DtBHum+yfg== | 2015-06-24 | Class III permissive change to software defined radio |
| K7Uogmempb+g+ue9wJTltw== | 2015-06-02 | Change in identification of presently authorized equipment. Original FCC ID: LDK102087P Grant Date: 07/11/2014 |
| APLAGWT0r6DRdd5kVPoGdw== | 2015-06-02 | Change in identification of presently authorized equipment. Original FCC ID: LDK102087P Grant Date: 06/05/2014 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2412-2462 MHz | 0.131 | 15C | CC |
| 2412-2462 MHz | 0.131 | 15C | CC, MO |
| 5180-5240 MHz | 0.0478 | 15E | CC, MO |
| 5180-5240 MHz | 0.048 | 15E | 38, CC, MO |
| 5260-5320 MHz | 0.2137 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.214 | 15E | 38, CC, MO, ND |
| 5500-5580 MHz | 0.1862 | 15E | CC, MO, ND |
| 5500-5720 MHz | 0.186 | 15E | 38, CC, MO, ND |
| 5660-5700 MHz | 0.1382 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.194 | 15C | CC |
| 5745-5825 MHz | 0.194 | 15C | CC, MO |
| 5745-5825 MHz | 0.166 | 15E | 38, CC, MO |
Grants
TCB Grant - Application v+Wu/YAKD/haHqjP8YhRVg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/20/2015 Application Dated: 07/06/2015 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Industrial Wireless 802.11ac Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0478 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2137 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.1862 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.1382 |
| Class II Permissive Change. Output power is conducted. This device has 20 MHz, 40 MHz and 80 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide minimum separation distances as specified in this filing from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This device must be professionally installed. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application v+Wu/YAKD/haHqjP8YhRVg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 07/20/2015 Application Dated: 07/06/2015 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Industrial Wireless 802.11ac Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0478 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2137 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.1862 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.1382 |
| Class II Permissive Change. Output power is conducted. This device has 20 MHz, 40 MHz and 80 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide minimum separation distances as specified in this filing from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This device must be professionally installed. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 03/09/2016 Application Dated: 03/04/2016 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Industrial Wireless 802.11ac Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.214 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.186 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.166 |
| Class II Permissive Change documented in this filing. Output power is conducted. This device has 20 MHz, 40 MHz and 80 MHz BW modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide minimum separation distances as specified in this filing from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This device must be professionally installed. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application ufhRyNTB3rwyxshzWdswWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 03/09/2016 Application Dated: 03/04/2016 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Industrial Wireless 802.11ac Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.214 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.186 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.166 |
| Class II Permissive Change documented in this filing. Output power is conducted. This device has 20 MHz, 40 MHz and 80 MHz BW modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide minimum separation distances as specified in this filing from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This device must be professionally installed. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/20/2015 Application Dated: 07/06/2015 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Industrial Wireless 802.11ac Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.131 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.194 |
| Class II Permissive Change. Output power is conducted. This device has 20 MHz, 40 MHz and 80 MHz BW modes in the 5.8 GHz band. The antenna(s) used for this transmitter must be installed to provide separation distances as specified in this filing and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This device must be professionally installed. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application PRdwisLvYxheooNqvFZ1Ug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 07/20/2015 Application Dated: 07/06/2015 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Industrial Wireless 802.11ac Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.131 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.194 |
| Class II Permissive Change. Output power is conducted. This device has 20 MHz, 40 MHz and 80 MHz BW modes in the 5.8 GHz band. The antenna(s) used for this transmitter must be installed to provide separation distances as specified in this filing and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This device must be professionally installed. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/02/2015 Application Dated: 05/27/2015 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Wireless 802.11ac Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0478 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2137 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.1862 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.1382 |
| Output power is conducted. This device has 20 MHz, 40 MHz and 80 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application K7Uogmempb+g+ue9wJTltw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 06/02/2015 Application Dated: 05/27/2015 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Wireless 802.11ac Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0478 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2137 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.1862 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.1382 |
| Output power is conducted. This device has 20 MHz, 40 MHz and 80 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/26/2015 Application Dated: 06/25/2015 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Industrial Wireless 802.11ac Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0478 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2137 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.1862 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.1382 |
| Class III Permissive Change. Output power is conducted. This device has 20 MHz, 40 MHz and 80 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application bSmzMz/pEQJRmd9KUx+HuQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 06/26/2015 Application Dated: 06/25/2015 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Industrial Wireless 802.11ac Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0478 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2137 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.1862 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.1382 |
| Class III Permissive Change. Output power is conducted. This device has 20 MHz, 40 MHz and 80 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/24/2015 Application Dated: 06/12/2015 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Industrial Wireless 802.11ac Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.131 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.194 |
| Class III Permissive Change Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Bj2KSYa1UVc/DtBHum+yfg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 06/24/2015 Application Dated: 06/12/2015 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Industrial Wireless 802.11ac Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.131 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.194 |
| Class III Permissive Change Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/02/2015 Application Dated: 05/27/2015 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Wireless 802.11ac Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.131 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.194 |
| Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application APLAGWT0r6DRdd5kVPoGdw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 06/02/2015 Application Dated: 05/27/2015 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW3702 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Wireless 802.11ac Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.131 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.194 |
| Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |