FCC ID LDKIW9167EH
Cisco Catalyst IW9167E Heavy Duty Access Point
by Cisco Systems Inc
Grantee Code: LDK Product Code: IW9167EH
Latest application date: 2024-08-28
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 4945-4985 MHz | Class II permissive change or modification of presently authorized equipment | 2024-08-28 |
| 5180-5250 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-14 |
| 5955-6415 MHz | Original Equipment | 2024-06-14 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-14 |
| 4945-4985 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-14 |
| 4945-4985 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-02 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-02 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-02 |
| 2412-2462 MHz | Original Equipment | 2023-02-16 |
| 5745-5825 MHz | Original Equipment | 2023-02-16 |
| 4945-4985 MHz | Original Equipment | 2023-02-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2024-12-11 | PDF 5.8 MB |
| User Manual | Users Manual | 2024-08-28 | PDF 1.6 MB |
| User Manual | Users Manual | 2023-08-15 | PDF 4.3 MB |
| Internal Photos pt. 1 | Internal Photos | 2024-12-11 | PDF 5.3 MB |
| Internal Photos pt. 2 | Internal Photos | 2024-12-11 | PDF 4.4 MB |
| Internal Photos Part 1 | Internal Photos | 2023-08-15 | PDF 4.8 MB |
| Internal Photos Part 2 | Internal Photos | 2023-08-15 | PDF 1.3 MB |
| External Photos | External Photos | 2024-12-11 | PDF 2.8 MB |
| External Photos | External Photos | 2023-08-15 | PDF 2 MB |
| Label Info and Location | ID Label/Location Info | 2024-06-14 | PDF 160.1 KB |
| Label and Location | ID Label/Location Info | 2023-02-16 | PDF 160.1 KB |
| OpDes Geolocation General Desc | Operational Description | 2024-06-14 | PDF 232.1 KB |
| TSUP | Test Setup Photos | 2024-12-11 | PDF 407.9 KB |
| TSUP DFS | Test Setup Photos | 2024-12-11 | PDF 472.5 KB |
| TSUP 2.4GHz | Test Setup Photos | 2023-08-15 | PDF 452.6 KB |
| TSUP 4.9G | Test Setup Photos | 2023-08-15 | PDF 569.3 KB |
| TSUP 5GHz UNII 1,3 | Test Setup Photos | 2023-08-15 | PDF 672.2 KB |
| TSUP 5GHz UNII 2A,2C | Test Setup Photos | 2023-08-15 | PDF 669.4 KB |
| TSUP BT 5.0 | Test Setup Photos | 2023-08-15 | PDF 451.2 KB |
| TSUP DFS | Test Setup Photos | 2023-08-15 | PDF 223.5 KB |
| DFS Test Photos | Test Setup Photos | 2023-05-02 | PDF 234.7 KB |
| TSUP DFS | Test Setup Photos | 2023-05-02 | PDF 234.7 KB |
| Antenna Report m-iw-ant-ds9-516-n | Test Report | 2024-08-28 | PDF 1.9 MB |
| Antenna Report m-iw-ant-ss9-516-n | Test Report | 2024-08-28 | PDF 2.6 MB |
| Test Report | Test Report | 2024-08-28 | PDF 4.7 MB |
| AFC DUT Test Harness Report | Test Report | 2024-06-14 | PDF 2.6 MB |
| Antenna Datasheet Metadata only | Test Report | 2024-06-14 | PDF 2.2 MB |
| Antenna Datasheet IW-ANT-PNL25610-R | Test Report | 2024-06-14 | PDF 2.2 MB |
| Antenna Rpt IW-ANT-OMH-55-N | Test Report | 2024-06-14 | PDF 1.3 MB |
| Antenna Rpt IW-ANT-OMV-55-N | Test Report | 2024-06-14 | PDF 1.4 MB |
| Antenna Rpt IW-ANT-PNL-515-N | Test Report | 2024-06-14 | PDF 733.4 KB |
| Antenna Rpt OCX24688-CS1 | Test Report | 2024-06-14 | PDF 420.7 KB |
| Antenna Rpt OCX24688H-CS1 | Test Report | 2024-06-14 | PDF 405.4 KB |
| Test Report 6G B5B7 pt. 1 | Test Report | 2024-06-14 | PDF 5.3 MB |
| Test Report 6G B5B7 pt. 2 | Test Report | 2024-06-14 | PDF 5.4 MB |
| Test Report 6G B5B7 pt. 3 | Test Report | 2024-06-14 | PDF 5.4 MB |
| Test Report 6G B5B7 pt. 4 | Test Report | 2024-06-14 | PDF 4.7 MB |
| Test Report DFS Part 1 | Test Report | 2024-06-14 | PDF 5.8 MB |
| Test Report DFS Part 2 | Test Report | 2024-06-14 | PDF 5 MB |
| Test Report DFS Part 3 | Test Report | 2024-06-14 | PDF 4 MB |
| Antenna 07-1192-01 data | Test Report | 2023-05-02 | PDF 2.4 MB |
| Antenna 1356.17.0023 | Test Report | 2023-05-02 | PDF 914.5 KB |
| Antenna 1356.17.0076 | Test Report | 2023-05-02 | PDF 1.5 MB |
| Antenna ANT-SKS-513-Q data | Test Report | 2023-05-02 | PDF 584.3 KB |
| Antenna ANT-SKS-513-Q specs | Test Report | 2023-05-02 | PDF 584.3 KB |
| Antenna ANT-SKS-514-Q data | Test Report | 2023-05-02 | PDF 584.3 KB |
| Antenna ANT-SKS-514-Q specs | Test Report | 2023-05-02 | PDF 584.3 KB |
| Antenna HG3-CC-S90 data | Test Report | 2023-05-02 | PDF 3.5 MB |
| Antenna OB-ANT-0985 data | Test Report | 2023-05-02 | PDF 778.1 KB |
| Antenna OC24527-CS3 | Test Report | 2023-05-02 | PDF 159.8 KB |
| Antenna OC24528-CS1 | Test Report | 2023-05-02 | PDF 161.9 KB |
| Antenna OC24528-CS4 | Test Report | 2023-05-02 | PDF 148.9 KB |
| Antenna OCX24529-CS1 | Test Report | 2023-05-02 | PDF 708.4 KB |
| Antenna OCX24529-CS2 | Test Report | 2023-05-02 | PDF 2.8 MB |
| Antenna OCX24668H-CS1 | Test Report | 2023-05-02 | PDF 405.4 KB |
| Antenna OCX24688-CS1 | Test Report | 2023-05-02 | PDF 420.7 KB |
| Antenna PDM24499-CS1 | Test Report | 2023-05-02 | PDF 843.3 KB |
| Antenna PDM245115H-CS1 | Test Report | 2023-05-02 | PDF 863.4 KB |
| Antenna PDM245115H-CS2 | Test Report | 2023-05-02 | PDF 841.9 KB |
| Antenna S4905WBCFNM | Test Report | 2023-05-02 | PDF 337 KB |
| DFS Test Report pt1 | Test Report | 2023-05-02 | PDF 5.6 MB |
| DFS Test Report pt2 | Test Report | 2023-05-02 | PDF 4.6 MB |
| DFS Test Report pt3 | Test Report | 2023-05-02 | PDF 4.4 MB |
| Authorization Letter | Test Report | 2023-02-16 | PDF 83.3 KB |
| Confidentiality Letter | Test Report | 2023-02-16 | PDF 150 KB |
| TR 2.4GHz Part 1 | Test Report | 2023-02-16 | PDF 4.1 MB |
| TR 2.4GHz Part 2 | Test Report | 2023-02-16 | PDF 4.2 MB |
| TR 2.4GHz Part 3 | Test Report | 2023-02-16 | PDF 3.9 MB |
| TR 2.4GHz Part 4 | Test Report | 2023-02-16 | PDF 4.1 MB |
| TR 2.4GHz Part 5 | Test Report | 2023-02-16 | PDF 4.2 MB |
| TR 2.4GHz Part 6 | Test Report | 2023-02-16 | PDF 4.4 MB |
| TR 2.4GHz Part 7 | Test Report | 2023-02-16 | PDF 532.4 KB |
| TR 5GHz UNII 1,3 Part 1 | Test Report | 2023-02-16 | PDF 4.7 MB |
| TR 5GHz UNII 1,3 Part 10 | Test Report | 2023-02-16 | PDF 3.7 MB |
| TR 5GHz UNII 1,3 Part 11 | Test Report | 2023-02-16 | PDF 4 MB |
| TR 5GHz UNII 1,3 Part 12 | Test Report | 2023-02-16 | PDF 3.7 MB |
| TR 5GHz UNII 1,3 Part 13 | Test Report | 2023-02-16 | PDF 3.7 MB |
| TR 5GHz UNII 1,3 Part 14 | Test Report | 2023-02-16 | PDF 3.9 MB |
| TR 5GHz UNII 1,3 Part 15 | Test Report | 2023-02-16 | PDF 3.6 MB |
| TR 5GHz UNII 1,3 Part 16 | Test Report | 2023-02-16 | PDF 3.7 MB |
| TR 5GHz UNII 1,3 Part 17 | Test Report | 2023-02-16 | PDF 4 MB |
| TR 5GHz UNII 1,3 Part 18 | Test Report | 2023-02-16 | PDF 4 MB |
| TR 5GHz UNII 1,3 Part 19 | Test Report | 2023-02-16 | PDF 4.1 MB |
| TR 5GHz UNII 1,3 Part 2 | Test Report | 2023-02-16 | PDF 4.5 MB |
| TR 5GHz UNII 1,3 Part 20 | Test Report | 2023-02-16 | PDF 4.4 MB |
| TR 5GHz UNII 1,3 Part 21 | Test Report | 2023-02-16 | PDF 4.3 MB |
| TR 5GHz UNII 1,3 Part 22 | Test Report | 2023-02-16 | PDF 4.3 MB |
| TR 5GHz UNII 1,3 Part 23 | Test Report | 2023-02-16 | PDF 4.3 MB |
| TR 5GHz UNII 1,3 Part 24 | Test Report | 2023-02-16 | PDF 4.2 MB |
| TR 5GHz UNII 1,3 Part 3 | Test Report | 2023-02-16 | PDF 2.9 MB |
| TR 5GHz UNII 1,3 Part 4 | Test Report | 2023-02-16 | PDF 4.2 MB |
| TR 5GHz UNII 1,3 Part 5 | Test Report | 2023-02-16 | PDF 3.8 MB |
| TR 5GHz UNII 1,3 Part 6 | Test Report | 2023-02-16 | PDF 3.7 MB |
| TR 5GHz UNII 1,3 Part 7 | Test Report | 2023-02-16 | PDF 3.7 MB |
| TR 5GHz UNII 1,3 Part 8 | Test Report | 2023-02-16 | PDF 3.9 MB |
| TR 5GHz UNII 1,3 Part 9 | Test Report | 2023-02-16 | PDF 3.8 MB |
| TR 5GHz UNII 2A,2C Part 1 | Test Report | 2023-02-16 | PDF 5.3 MB |
| TR AIR-ANT2413P2M-N | Test Report | 2023-02-16 | PDF 414.9 KB |
| TR AIR-ANT2480V-N | Test Report | 2023-02-16 | PDF 122.4 KB |
| TR AIR-ANT5114P2M-N | Test Report | 2023-02-16 | PDF 485.2 KB |
| TR AIR-ANT5114P2M-N Spec Sheet | Test Report | 2023-02-16 | PDF 2.4 MB |
| TR AIR-ANT5180V-N | Test Report | 2023-02-16 | PDF 337 KB |
| TR ANT-DS-OC24527-CS3 | Test Report | 2023-02-16 | PDF 159.8 KB |
| TR ANT-DS-OC24528-CS1 | Test Report | 2023-02-16 | PDF 161.9 KB |
| TR ANT-DS-OC24528-CS4 | Test Report | 2023-02-16 | PDF 148.9 KB |
| TR ANT-DS-OCX24529-CS1 | Test Report | 2023-02-16 | PDF 708.4 KB |
| TR ANT-DS-OCX24529-CS2 | Test Report | 2023-02-16 | PDF 2.8 MB |
| TR ANT-DS-PDM24499-CS1 | Test Report | 2023-02-16 | PDF 843.3 KB |
| TR ANT-DS-PDM245115H-CS1 | Test Report | 2023-02-16 | PDF 863.4 KB |
| TR ANT-DS-PDM245115H-CS2 | Test Report | 2023-02-16 | PDF 841.9 KB |
| TR Ant Spec IW-ANT-SKS-513 | Test Report | 2023-02-16 | PDF 584.3 KB |
| TR Ant Spec IW-ANT-SKS-514 | Test Report | 2023-02-16 | PDF 584.3 KB |
| TR BT 5.0 | Test Report | 2023-02-16 | PDF 4.8 MB |
| TR DFS Part 1 | Test Report | 2023-02-16 | PDF 4.8 MB |
| TR DFS Part 2 | Test Report | 2023-02-16 | PDF 700.8 KB |
| TR FLMESH-HW-ANT-28 | Test Report | 2023-02-16 | PDF 914.5 KB |
| TR IW-ANT-H90-510-N | Test Report | 2023-02-16 | PDF 3.5 MB |
| TR IW-ANT-OMH-2567-N | Test Report | 2023-02-16 | PDF 405.4 KB |
| TR IW-ANT-OMM-53-N | Test Report | 2023-02-16 | PDF 778.1 KB |
| TR IW-ANT-OMV-2567-N | Test Report | 2023-02-16 | PDF 420.7 KB |
| TR IW-ANT-PNL-59-N | Test Report | 2023-02-16 | PDF 1.5 MB |
| Attestation Statement 2.911(d)(7) | Attestation Statements | 2024-08-28 | PDF 120 KB |
| Attstn Stmt parts 2.911(d)(5)(i)&(ii) | Attestation Statements | 2024-08-28 | PDF 167.3 KB |
| Attestation Statement 2.911(d)(7) | Attestation Statements | 2024-06-14 | PDF 120 KB |
| Attstn Stmt Part 2.911(d)(5)(i)&(ii) | Attestation Statements | 2024-06-14 | PDF 146.1 KB |
| Attstn Stmt parts 2.911(d)(5)(i)&(ii) | Attestation Statements | 2024-06-14 | PDF 146.1 KB |
| Attstn Stmts 2.911(d)(5)(i)&(ii) | Attestation Statements | 2024-06-14 | PDF 146.1 KB |
| Declaration of 6SD | Attestation Statements | 2024-06-14 | PDF 147.4 KB |
| Attestation pt 2.911(d)(5)(i)&(ii) | Attestation Statements | 2023-05-02 | PDF 125.9 KB |
| Attestation pt 2.911(d)(7) | Attestation Statements | 2023-05-02 | PDF 99.5 KB |
| Attestation Statement part 2.911(d)(7) | Attestation Statements | 2023-02-16 | PDF 99.5 KB |
| Attestation Stmt part 2.911(d)(7) | Attestation Statements | 2023-02-16 | PDF 122.3 KB |
| Attstn Stmt part 2.911(d)(5)(i)&(ii) | Attestation Statements | 2023-02-16 | PDF 115.6 KB |
| Authorization Letter | Cover Letter(s) | 2024-08-28 | PDF 140.7 KB |
| Authorization Letter - Grantee | Cover Letter(s) | 2024-08-28 | PDF 83.3 KB |
| C2PC Letter | Cover Letter(s) | 2024-08-28 | PDF 135.8 KB |
| Authorizaiton Letter | Cover Letter(s) | 2024-06-14 | PDF 121.2 KB |
| Authorization Letter | Cover Letter(s) | 2024-06-14 | PDF 121.2 KB |
| Authorization Letter for Grantee | Cover Letter(s) | 2024-06-14 | PDF 83.3 KB |
| C2PC Letter | Cover Letter(s) | 2024-06-14 | PDF 134.8 KB |
| Confidentiality Letter | Cover Letter(s) | 2024-06-14 | PDF 146.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2024-06-14 | PDF 184.6 KB |
| Professional Installation Declaration | Cover Letter(s) | 2024-06-14 | PDF 145.4 KB |
| Authorization Letter | Cover Letter(s) | 2023-05-02 | PDF 140.5 KB |
| C2PC Letter | Cover Letter(s) | 2023-05-02 | PDF 102.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2023-05-02 | PDF 184.4 KB |
| POA | Cover Letter(s) | 2023-05-02 | PDF 99.6 KB |
| Authorization Letter | Cover Letter(s) | 2023-02-16 | PDF 83.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2023-02-16 | PDF 150 KB |
| POA Letter | Cover Letter(s) | 2023-02-16 | PDF 144.1 KB |
| Professional Installation Dec Letter | Cover Letter(s) | 2023-02-16 | PDF 147.6 KB |
| RF Exposure MPE | RF Exposure Info | 2024-08-28 | PDF 621.1 KB |
| RF Exposure MPE | RF Exposure Info | 2024-06-14 | PDF 644.1 KB |
| RF Exposure MPE | RF Exposure Info | 2023-02-16 | PDF 540.1 KB |
Application Information
| Application ID | DHaoMQwvJNiieWebXTLGvQ== |
|---|---|
| Final Action Date | 2024-08-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004968939 |
| Model | IW9167EH |
| Frequency Range | 4945-4985 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Responsible Party | Samuel Kim, Manager, Engineering, samukim@cisco.com  , 408-527-1446 |
| Test Firm | Alex Chen, Sporton International Inc. Hsinchu Laboratory, alex@sporton.com.tw  , +886-3-327-3456 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is the maximum combined conducted output power. Professional installation is required. This device operates in MIMO configurations as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 107 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Antennas are limited to those described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10 and 20 MHz bandwidth modes. Class II Permissive Change: Adds new antenna set with higher gain for 4.9 GHz mode and lower gain for 5 GHz modes. Adds VHT mode supporting 10 and 20 MHz bandwidths for 4.9 GHz. Corrects a typographical error for a 5 GHz antenna gain. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| DHaoMQwvJNiieWebXTLGvQ== | 2024-08-28 | Class II permissive change or modification of presently authorized equipment |
| zkS1pP6MfTPOF8UpEjf2Kg== | 2024-06-14 | Class II permissive change or modification of presently authorized equipment |
| vLlsOdnq+Dfb8dCeYsDxew== | 2024-06-14 | Original Equipment |
| mg+pcnFOZ6fsvrYlFnU0fw== | 2024-06-14 | Class II permissive change or modification of presently authorized equipment |
| 2CoKsSojXzFB6VUJ1ObwiQ== | 2024-06-14 | Class II permissive change or modification of presently authorized equipment |
| Tjm9zpJdU4mXNyM3izBGrA== | 2023-05-02 | Class II permissive change or modification of presently authorized equipment |
| MpAHRW7HSD+D5KT93QqZ6Q== | 2023-05-02 | Class II permissive change or modification of presently authorized equipment |
| AcaSBxxuw6i8+1akBChYLQ== | 2023-05-02 | Class II permissive change or modification of presently authorized equipment |
| teyzqhkiFawAU2pv4Xil2w== | 2023-02-16 | Original Equipment |
| qd3NgVFDvwkVXNNLwtiItA== | 2023-02-16 | Original Equipment |
| N+tfu03cg/cDzT//uk9KqA== | 2023-02-16 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 2402-2480 MHz | 0.031 | 15C | CC | ||
| 2412-2462 MHz | 0.361 | 15C | CC, MO | ||
| 4945-4985 MHz | 0.1640000 | 1.8820000000ppm | 16M7W7D | 90Y | MO |
| 5180-5250 MHz | 0.125 | 15E | CC, MO | ||
| 5250-5320 MHz | 0.249 | 15E | CC, MO, ND | ||
| 5500-5720 MHz | 0.249 | 15E | CC, MO, ND | ||
| 5745-5825 MHz | 0.656 | 15E | CC, MO | ||
| 5955-6415 MHz | 1.986 | 15E | CC, EP, MO | ||
| 6535-6855 MHz | 1.986 | 15E | CC, EP, MO |
Grants
TCB Grant - Application zkS1pP6MfTPOF8UpEjf2Kg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 06/14/2024 Application Dated: 06/06/2024 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.125 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.249 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.249 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.656 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 102 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Class II Permissive Change: Adds 6 GHz Standard Power Access Point capabilities. Adds lower gain antenna set as described in this filing. Adds mesh and bridge modes as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application zkS1pP6MfTPOF8UpEjf2Kg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 06/14/2024 Application Dated: 06/06/2024 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.125 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.249 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.249 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.656 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 102 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Class II Permissive Change: Adds 6 GHz Standard Power Access Point capabilities. Adds lower gain antenna set as described in this filing. Adds mesh and bridge modes as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 06/14/2024 Application Dated: 06/06/2024 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | 15E 6 GHz Standard Power Access Point |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 6415.0 | 1.986 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 1.986 |
| Power listed is EIRP. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 102 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Class II Permissive Change: Adds 6 GHz Standard Power Access Point capabilities. Adds lower gain antenna set as described in this filing. Adds lower gain antenna set as described in this filing. Adds mesh and bridge modes as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application vLlsOdnq+Dfb8dCeYsDxew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 06/14/2024 Application Dated: 06/06/2024 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | 15E 6 GHz Standard Power Access Point |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 6415.0 | 1.986 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 1.986 |
| Power listed is EIRP. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 102 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Class II Permissive Change: Adds 6 GHz Standard Power Access Point capabilities. Adds lower gain antenna set as described in this filing. Adds lower gain antenna set as described in this filing. Adds mesh and bridge modes as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/02/2023 Application Dated: 04/25/2023 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 90Y | 4945.0 - 4985.0 | 0.164 | 1.882 PM | 16M7W7D |
| Output power listed is conducted. This device operates in MIMO configurations as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 100 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Antennas are limited to those described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10 and 20 MHz bandwidth modes. Class II Permissive Change: Adds client mode with radar detection. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Tjm9zpJdU4mXNyM3izBGrA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 05/02/2023 Application Dated: 04/25/2023 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 90Y | 4945.0 - 4985.0 | 0.164 | 1.882 PM | 16M7W7D |
| Output power listed is conducted. This device operates in MIMO configurations as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 100 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Antennas are limited to those described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10 and 20 MHz bandwidth modes. Class II Permissive Change: Adds client mode with radar detection. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/16/2023 Application Dated: 02/10/2023 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.361 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.031 |
| Output Power listed is the maximum combined conducted output power. Professional installation required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 100 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application teyzqhkiFawAU2pv4Xil2w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 02/16/2023 Application Dated: 02/10/2023 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.361 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.031 |
| Output Power listed is the maximum combined conducted output power. Professional installation required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 100 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/16/2023 Application Dated: 02/10/2023 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.125 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.249 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.249 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.656 |
| Power listed is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 100 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application qd3NgVFDvwkVXNNLwtiItA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 02/16/2023 Application Dated: 02/10/2023 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.125 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.249 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.249 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.656 |
| Power listed is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 100 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/16/2023 Application Dated: 02/10/2023 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 90Y | 4945.0 - 4985.0 | 0.164 | 1.882 PM | 16M7W7D |
| Output power listed is conducted. This device operates in MIMO configurations as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 100 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Antennas are limited to those described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10 and 20 MHz bandwidth modes. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application N+tfu03cg/cDzT//uk9KqA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 02/16/2023 Application Dated: 02/10/2023 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 90Y | 4945.0 - 4985.0 | 0.164 | 1.882 PM | 16M7W7D |
| Output power listed is conducted. This device operates in MIMO configurations as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 100 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Antennas are limited to those described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10 and 20 MHz bandwidth modes. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/02/2023 Application Dated: 04/25/2023 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.125 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.249 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.249 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.656 |
| Power listed is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 100 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Class II Permissive Change: Adds client mode with radar detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application MpAHRW7HSD+D5KT93QqZ6Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 05/02/2023 Application Dated: 04/25/2023 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.125 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.249 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.249 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.656 |
| Power listed is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 100 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Class II Permissive Change: Adds client mode with radar detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 06/14/2024 Application Dated: 06/06/2024 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.361 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.031 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 102 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20 MHz bandwidth modes. Class II Permissive Change: Adds 6 GHz Standard Power Access Point capabilities. Adds lower gain antenna set as described in this filing. Adds lower gain antenna set as described in this filing. Adds mesh and bridge modes as described in this filing. Removes master mode and slave with radar detection mode as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application mg+pcnFOZ6fsvrYlFnU0fw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 06/14/2024 Application Dated: 06/06/2024 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.361 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.031 |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 102 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20 MHz bandwidth modes. Class II Permissive Change: Adds 6 GHz Standard Power Access Point capabilities. Adds lower gain antenna set as described in this filing. Adds lower gain antenna set as described in this filing. Adds mesh and bridge modes as described in this filing. Removes master mode and slave with radar detection mode as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 08/28/2024 Application Dated: 08/27/2024 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 90Y | 4945.0 - 4985.0 | 0.164 | 1.882 PM | 16M7W7D |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. This device operates in MIMO configurations as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 107 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Antennas are limited to those described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10 and 20 MHz bandwidth modes. Class II Permissive Change: Adds new antenna set with higher gain for 4.9 GHz mode and lower gain for 5 GHz modes. Adds VHT mode supporting 10 and 20 MHz bandwidths for 4.9 GHz. Corrects a typographical error for a 5 GHz antenna gain. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application DHaoMQwvJNiieWebXTLGvQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 08/28/2024 Application Dated: 08/27/2024 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 90Y | 4945.0 - 4985.0 | 0.164 | 1.882 PM | 16M7W7D |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. This device operates in MIMO configurations as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 107 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Antennas are limited to those described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10 and 20 MHz bandwidth modes. Class II Permissive Change: Adds new antenna set with higher gain for 4.9 GHz mode and lower gain for 5 GHz modes. Adds VHT mode supporting 10 and 20 MHz bandwidths for 4.9 GHz. Corrects a typographical error for a 5 GHz antenna gain. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/02/2023 Application Dated: 04/25/2023 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.361 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.031 |
| Output Power listed is the maximum combined conducted output power. Professional installation required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 100 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20 MHz bandwidth modes. Class II Permissive Change: Adds client mode with radar detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application AcaSBxxuw6i8+1akBChYLQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 05/02/2023 Application Dated: 04/25/2023 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.361 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.031 |
| Output Power listed is the maximum combined conducted output power. Professional installation required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 100 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20 MHz bandwidth modes. Class II Permissive Change: Adds client mode with radar detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 06/14/2024 Application Dated: 06/06/2024 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 90Y | 4945.0 - 4985.0 | 0.164 | 1.882 PM | 16M7W7D |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. This device operates in MIMO configurations as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 102 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Antennas are limited to those described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10 and 20 MHz bandwidth modes. Class II Permissive Change: Adds 6 GHz Standard Power Access Point capabilities. Adds lower gain antenna set as described in this filing. Adds lower gain antenna set as described in this filing. Adds mesh and bridge modes as described in this filing. Removes master mode as described in this filing. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 2CoKsSojXzFB6VUJ1ObwiQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 06/14/2024 Application Dated: 06/06/2024 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKIW9167EH |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Cisco Catalyst IW9167E Heavy Duty Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 90Y | 4945.0 - 4985.0 | 0.164 | 1.882 PM | 16M7W7D |
| Output Power listed is the maximum combined conducted output power. Professional installation is required. This device operates in MIMO configurations as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 102 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Antennas are limited to those described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10 and 20 MHz bandwidth modes. Class II Permissive Change: Adds 6 GHz Standard Power Access Point capabilities. Adds lower gain antenna set as described in this filing. Adds lower gain antenna set as described in this filing. Adds mesh and bridge modes as described in this filing. Removes master mode as described in this filing. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |