FCC ID LDKMU6CR2417

Cisco Catalyst 9136I Access Point

by Cisco Systems Inc

Grantee Code: LDK   Product Code: MU6CR2417
Latest application date: 2025-11-20

FCC ID Device Details

FCC IDLDKMU6CR2417
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLDK
Product CodeMU6CR2417
Applicant BusinessCisco Systems Inc 🇺🇸
Related Domains cisco.com
Equipment ClassCisco Catalyst 9136I Access Point
Test FirmBay Area Compliance Laboratories Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzClass III permissive change to software defined radio2025-11-20
6535-6855 MHzClass III permissive change to software defined radio2024-03-18
5180-5240 MHzClass III permissive change to software defined radio2023-11-28
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-11-21
5955-6415 MHzOriginal Equipment2022-01-26
5180-5240 MHzOriginal Equipment2022-01-26
2412-2462 MHzOriginal Equipment2022-01-26

Exhibits

DocumentTypeAvailableFile
Geolocation General DescriptionUsers Manual2024-09-14PDF 236.1 KB
User Manual Part 1Users Manual2024-09-14PDF 5.5 MB
User Manual Part 2Users Manual2024-09-14PDF 4.9 MB
User Manual Part 3Users Manual2024-09-14PDF 4.5 MB
User ManualUsers ManualPDF 1.7 MB
Internal PhotosInternal Photos2026-05-19PDF 1.3 MB
Internal PhotosInternal Photos2024-09-14PDF 2.8 MB
External PhotosExternal Photos2026-05-19PDF 863.5 KB
External PhotosExternal Photos2024-09-14PDF 664.5 KB
Label and Label LocationID Label/Location Info2025-11-20PDF 119.1 KB
LabelID Label/Location Info2024-03-18PDF 122.6 KB
Label and Label LocationID Label/Location Info2023-11-28PDF 122 KB
Label & Label LocationID Label/Location Info2023-04-13PDF 122 KB
Test Setup PhotosTest Setup Photos2026-05-19PDF 562.2 KB
TSUPTest Setup Photos2024-09-14PDF 882.5 KB
Setup PhotosTest Setup Photos2024-05-26PDF 470.7 KB
Test Setup PhotosTest Setup Photos2023-10-10PDF 470.7 KB
TSUP 2.4GTest Setup PhotosPDF 1.6 MB
TSUP 5GTest Setup PhotosPDF 1.1 MB
TSUP 6GTest Setup PhotosPDF 1.1 MB
TSUP DFSTest Setup PhotosPDF 338.4 KB
TSUP LETest Setup PhotosPDF 1.1 MB
Reference Test ReportTest Report2025-11-20PDF 5 MB
Test ReportTest Report2025-11-20PDF 2.3 MB
Test Harness ReportTest Report2024-03-18PDF 1.7 MB
Test Report 6G Part 1Test Report2024-03-18PDF 5.8 MB
Test Report 6G Part 2Test Report2024-03-18PDF 5.8 MB
Test Report 6G Part 3Test Report2024-03-18PDF 5.8 MB
Test Report 6G Part 4Test Report2024-03-18PDF 5.8 MB
Test Report 6G Part 5Test Report2024-03-18PDF 5.8 MB
Test Report 6G Part 6Test Report2024-03-18PDF 5.8 MB
Test Report 6G Part 7Test Report2024-03-18PDF 1.8 MB
Test Report AntennaTest Report2024-03-18PDF 2.7 MB
Antenna SpecificationTest Report2023-11-28PDF 2.1 MB
C9136I FCC Zero Wait DFS ReportTest Report2023-11-28PDF 1.8 MB
Reference Original DFS ReportTest Report2023-11-28PDF 3.6 MB
Antenna ReportTest Report2023-04-13PDF 2.1 MB
Reference Test ReportTest Report2023-04-13PDF 3.6 MB
Test ReportTest Report2023-04-13PDF 1.8 MB
TR 5G Part 1Test Report2022-01-26PDF 5.5 MB
TR 5G Part 10Test Report2022-01-26PDF 3.5 MB
TR 5G Part 11Test Report2022-01-26PDF 4.5 MB
TR 5G Part 12Test Report2022-01-26PDF 5.1 MB
TR 5G Part 13Test Report2022-01-26PDF 3.3 MB
TR 5G Part 14Test Report2022-01-26PDF 3.7 MB
TR 5G Part 15Test Report2022-01-26PDF 1.3 MB
TR 5G Part 2Test Report2022-01-26PDF 5.5 MB
TR 5G Part 3Test Report2022-01-26PDF 5.5 MB
TR 5G Part 4Test Report2022-01-26PDF 5.5 MB
TR 5G Part 5Test Report2022-01-26PDF 2.7 MB
TR 5G Part 6Test Report2022-01-26PDF 3 MB
TR 5G Part 7Test Report2022-01-26PDF 3.4 MB
TR 5G Part 8Test Report2022-01-26PDF 3.8 MB
TR 5G Part 9Test Report2022-01-26PDF 3 MB
TR DFS 1030Test Report2022-01-26PDF 3.8 MB
Test Report 2.4 G Part 1Test Report2022-01-26PDF 5.5 MB
Test Report 2.4 G Part 2Test Report2022-01-26PDF 5.5 MB
Test Report 2.4 G Part 3Test Report2022-01-26PDF 5.5 MB
Test Report 2.4 G Part 4Test Report2022-01-26PDF 5.1 MB
Test Report 6G Part 1Test Report2022-01-26PDF 5.5 MB
Test Report 6G Part 10Test Report2022-01-26PDF 5.5 MB
Test Report 6G Part 11Test Report2022-01-26PDF 1.2 MB
Test Report 6G Part 2Test Report2022-01-26PDF 5.5 MB
Test Report 6G Part 3Test Report2022-01-26PDF 4 MB
Test Report 6G Part 4Test Report2022-01-26PDF 5 MB
Test Report 6G Part 5Test Report2022-01-26PDF 5.5 MB
Test Report 6G Part 6Test Report2022-01-26PDF 5.9 MB
Test Report 6G Part 7Test Report2022-01-26PDF 5 MB
Test Report 6G Part 8Test Report2022-01-26PDF 5.5 MB
Test Report 6G Part 9Test Report2022-01-26PDF 4.3 MB
Test Report LETest Report2022-01-26PDF 3.9 MB
2.911(d)(5)(i) Attestation StatementAttestation Statements2025-11-20PDF 142.5 KB
2.911(d)(5)(ii) Attestation StatementAttestation Statements2025-11-20PDF 142.9 KB
US Agent Attestation LetterAttestation Statements2025-11-20PDF 90.4 KB
Attestation Statement WiFi 6EAttestation Statements2024-03-18PDF 98.1 KB
Attestation Statement part 2.911(d)(7)Attestation Statements2024-03-18PDF 98.6 KB
Attstn Stmt part 2.911(d)(5)(i)&(ii)Attestation Statements2024-03-18PDF 95.9 KB
Attestation Letter-2.911(d)(5)(i)Attestation Statements2023-11-28PDF 113.9 KB
Attestation Letter-2.911(d)(5)(i)(ii)Attestation Statements2023-11-28PDF 102.7 KB
US Agent Attestation LetterAttestation Statements2023-11-28PDF 119.2 KB
2.911 (d)(5)(i) Attestation StatementAttestation Statements2023-04-13PDF 113.9 KB
2.911 (d)(5)(ii) Attestation StatementAttestation Statements2023-04-13PDF 102.7 KB
DOC Operation LetterAttestation Statements2022-01-26PDF 278.7 KB
Data Reference Declaration LetterCover Letter(s)2025-11-20PDF 119.7 KB
Data Reference PlanCover Letter(s)2025-11-20PDF 980.3 KB
FCC Agent Authorization LetterCover Letter(s)2025-11-20PDF 134.4 KB
FCC Long and Short term Confidentiality RequestCover Letter(s)2025-11-20PDF 72.6 KB
Permissive Change Declaration LetterCover Letter(s)2025-11-20PDF 113.7 KB
C3PC LetterCover Letter(s)2024-03-18PDF 126.2 KB
Confidential Request LetterCover Letter(s)2024-03-18PDF 158.7 KB
Confidentiality Letter I Metadata onlyCover Letter(s)2024-03-18PDF 86.3 KB
Confidentiality Letter II Metadata onlyCover Letter(s)2024-03-18PDF 134.6 KB
LOA LetterCover Letter(s)2024-03-18PDF 122.9 KB
FCC Agent Authorization LetterCover Letter(s)2023-11-28PDF 95.7 KB
FCC C3PC Cover Letter Software Version IdentifierCover Letter(s)2023-11-28PDF 30.4 KB
FCC C3PC LetterCover Letter(s)2023-11-28PDF 478 KB
FCC Long and Short term Confidentiality RequestCover Letter(s)2023-11-28PDF 109.4 KB
C2PC Request letterCover Letter(s)2023-04-13PDF 446.8 KB
Confidentiality LetterCover Letter(s)2022-01-26PDF 129.4 KB
POA Grantee LetterCover Letter(s)2022-01-26PDF 88 KB
POA LetterCover Letter(s)2022-01-26PDF 128.9 KB
SDOC LetterCover Letter(s)2022-01-26PDF 127.5 KB
FCC Cover Letter (C9136I-B)Cover Letter(s)PDF 60.3 KB
FCC Cover Letter - FCC ID- LDKMU6CR2417Cover Letter(s)PDF 103 KB
FCC Dismissal LetterCover Letter(s)PDF 94.2 KB
RF Exposure InformationRF Exposure Info2025-11-20PDF 359.4 KB
RF Exposure MPERF Exposure Info2024-03-18PDF 762.2 KB
RF ExposureRF Exposure Info2023-11-28PDF 359 KB
RF ExposureRF Exposure Info2022-01-26PDF 402.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 526.4 KB
Block Diagram Module Metadata onlyBlock DiagramPDF 220.8 KB
Block Diagrams Metadata onlyBlock DiagramPDF 526.4 KB
Block Diagrams Module Metadata onlyBlock DiagramPDF 220.8 KB
Schematics Metadata onlySchematicsPDF 3.6 MB
Schematics Module Metadata onlySchematicsPDF 812.2 KB
FCC PAG Checklists Metadata onlyOperational DescriptionPDF 138.8 KB
FCC Zero Wait DFS Theory of Operation Metadata onlyOperational DescriptionPDF 66.3 KB
Geolocation Justification Report Metadata onlyOperational DescriptionPDF 1.5 MB
Geolocation PIA Acceptance Metadata onlyOperational DescriptionPDF 88 KB
Operation Description Metadata onlyOperational DescriptionPDF 2.5 MB
Operational Description Metadata onlyOperational DescriptionPDF 2.5 MB
Operational Description Metadata onlyOperational DescriptionPDF 66.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 2.5 MB
PAG Checklist Metadata onlyOperational DescriptionPDF 281.1 KB
PIA FCC Correspondence Metadata onlyOperational DescriptionPDF 136.6 KB
SDR Security Operational Description Metadata onlySDR Software/Security InfPDF 442.7 KB
FCC SOFTWARE DEFINED RADIO SECURITY DESCRIPTION Metadata onlySDR Software/Security InfPDF 135.6 KB
Op Desc Software Security Part 1 Metadata onlySDR Software/Security Info.PDF 442.7 KB
Op Desc Software Security Part 2 Metadata onlySDR Software/Security Info.PDF 485.9 KB
Op Desc Software Security Pt 1 Metadata onlySDR Software/Security InfPDF 442.7 KB
Op Desc Software Security Pt 2 Metadata onlySDR Software/Security InfPDF 485.9 KB
Software Defined Radio Description Metadata onlySDR Software/Security Info.PDF 377.8 KB
Software Security Description Metadata onlySDR Software/Security InfPDF 115 KB
Software Security Description Metadata onlySDR Software/Security Info.PDF 212.3 KB
U-NII Device Security Declaration Metadata onlySDR Software/Security InfPDF 115 KB

Application Information

Application ID4OrO/XsflWTGgmVwrgYb/Q==
Final Action Date2025-11-20
Application PurposeClass III permissive change to software defined radio
Applicant FRN0004968939
ModelMU6CR2417
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionCisco Catalyst 9136I Access Point
Responsible PartySamuel Kim, samukim@cisco.com , 408-527-1446
Test FirmLisa Tang, Bay Area Compliance Laboratories Corp., lisat@baclcorp.com , 408-732-9162
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Long-Term ConfidentialityYes
Modular EquipmentDoes not apply
Composite DeviceYes
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes

Applications

Application IDDatePurpose
4OrO/XsflWTGgmVwrgYb/Q==2025-11-20Class III permissive change to software defined radio
Tw+mKS3uhtCrPwK3Zw0WGg==2024-03-18Class III permissive change to software defined radio
s+ZiFKVO4dB5l/Q1xbxm/A==2023-11-28Class III permissive change to software defined radio
BQrNHnrNNJPQcXmdg0PMDw==2023-11-21Class II permissive change or modification of presently authorized equipment
BM++YAd2hRqt+AcvpqE6aA==2022-01-26Original Equipment
7olGcsLIiG+VGZFe3R4WZA==2022-01-26Original Equipment
7SPh2bBHnR9g5OkFJ8+rsQ==2022-01-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.075515CCC
2412-2462 MHz0.209415CCC, MO
5180-5240 MHz0.26315ECC, MO
5260-5320 MHz0.178215ECC, MO
5260-5320 MHz0.178215ECC, MO, ND
5500-5720 MHz0.237715ECC, MO
5500-5720 MHz0.237715ECC, MO, ND
5745-5825 MHz0.391715ECC, MO
5955-6415 MHz0.529715ECC, EP, MO
5955-6415 MHz3.28115ECC, EP, MO
6435-6515 MHz0.532115ECC, EP, MO
6535-6855 MHz2.95815ECC, EP, MO
6535-6875 MHz0.54715ECC, EP, MO
6895-7095 MHz0.50715ECC, EP, MO

Grants

TCB Grant - Application Tw+mKS3uhtCrPwK3Zw0WGg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 03/18/2024

Application Dated: 02/12/2024
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKMU6CR2417
Name of Grantee:  Cisco Systems Inc
Equipment Class: 15E 6 GHz Standard Power Access Point
Notes: Cisco Catalyst 9136I Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  6415.0 3.281  
CC EP MO 15E 6535.0  -  6855.0 2.958  

Power listed is EIRP. Software Defined Radio. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 58 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is restricted to indoor use only.

Class III Permissive Change: Enables 6 GHz Standard Power Access Point capabilities via software update.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Tw+mKS3uhtCrPwK3Zw0WGg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 03/18/2024

Application Dated: 02/12/2024
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKMU6CR2417
Name of Grantee:  Cisco Systems Inc
Equipment Class: 15E 6 GHz Standard Power Access Point
Notes: Cisco Catalyst 9136I Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  6415.0 3.281  
CC EP MO 15E 6535.0  -  6855.0 2.958  

Power listed is EIRP. Software Defined Radio. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 58 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is restricted to indoor use only.

Class III Permissive Change: Enables 6 GHz Standard Power Access Point capabilities via software update.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application s+ZiFKVO4dB5l/Q1xbxm/A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 11/28/2023

Application Dated: 11/21/2023
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKMU6CR2417
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9136I Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.263  
CC MO ND 15E 5260.0  -  5320.0 0.1782  
CC MO ND 15E 5500.0  -  5720.0 0.2377  
CC MO 15E 5745.0  -  5825.0 0.3917  

Class III Permissive Change described in this filing. Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 27cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes. Software Defined Radio.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application s+ZiFKVO4dB5l/Q1xbxm/A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 11/28/2023

Application Dated: 11/21/2023
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKMU6CR2417
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9136I Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.263  
CC MO ND 15E 5260.0  -  5320.0 0.1782  
CC MO ND 15E 5500.0  -  5720.0 0.2377  
CC MO 15E 5745.0  -  5825.0 0.3917  

Class III Permissive Change described in this filing. Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 27cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes. Software Defined Radio.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application BQrNHnrNNJPQcXmdg0PMDw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 04/13/2023

Application Dated: 04/05/2023
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKMU6CR2417
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9136I Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.263  
CC MO ND 15E 5260.0  -  5320.0 0.1782  
CC MO ND 15E 5500.0  -  5720.0 0.2377  
CC MO 15E 5745.0  -  5825.0 0.3917  

Class II Permissive Change described in this filing. Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 27cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes. Software Defined Radio.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application BQrNHnrNNJPQcXmdg0PMDw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 04/13/2023

Application Dated: 04/05/2023
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKMU6CR2417
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9136I Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.263  
CC MO ND 15E 5260.0  -  5320.0 0.1782  
CC MO ND 15E 5500.0  -  5720.0 0.2377  
CC MO 15E 5745.0  -  5825.0 0.3917  

Class II Permissive Change described in this filing. Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 27cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes. Software Defined Radio.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application BM++YAd2hRqt+AcvpqE6aA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/26/2022

Application Dated: 11/04/2021
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKMU6CR2417
Name of Grantee:  Cisco Systems Inc
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: Cisco Catalyst 9136I Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  6415.0 0.5297  
CC EP MO 15E 6435.0  -  6515.0 0.5321  
CC EP MO 15E 6535.0  -  6875.0 0.547  
CC EP MO 15E 6895.0  -  7095.0 0.507  

Power listed is EIRP. Software Defined Radio. This device is restricted to indoor use only. Device must be installed and operated to provide a separation distance of at least 27 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application BM++YAd2hRqt+AcvpqE6aA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 01/26/2022

Application Dated: 11/04/2021
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKMU6CR2417
Name of Grantee:  Cisco Systems Inc
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: Cisco Catalyst 9136I Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  6415.0 0.5297  
CC EP MO 15E 6435.0  -  6515.0 0.5321  
CC EP MO 15E 6535.0  -  6875.0 0.547  
CC EP MO 15E 6895.0  -  7095.0 0.507  

Power listed is EIRP. Software Defined Radio. This device is restricted to indoor use only. Device must be installed and operated to provide a separation distance of at least 27 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 7SPh2bBHnR9g5OkFJ8+rsQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/26/2022

Application Dated: 11/04/2021
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKMU6CR2417
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Catalyst 9136I Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0755  
CC MO 15C 2412.0  -  2462.0 0.2094  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 27cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes. Software Defined Radio.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 7SPh2bBHnR9g5OkFJ8+rsQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 01/26/2022

Application Dated: 11/04/2021
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKMU6CR2417
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Catalyst 9136I Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0755  
CC MO 15C 2412.0  -  2462.0 0.2094  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 27cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes. Software Defined Radio.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 7olGcsLIiG+VGZFe3R4WZA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/26/2022

Application Dated: 11/01/2021
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKMU6CR2417
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9136I Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.263  
CC MO 15E 5260.0  -  5320.0 0.1782  
CC MO 15E 5500.0  -  5720.0 0.2377  
CC MO 15E 5745.0  -  5825.0 0.3917  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 27cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes. Software Defined Radio.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 7olGcsLIiG+VGZFe3R4WZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 01/26/2022

Application Dated: 11/01/2021
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKMU6CR2417
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9136I Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.263  
CC MO 15E 5260.0  -  5320.0 0.1782  
CC MO 15E 5500.0  -  5720.0 0.2377  
CC MO 15E 5745.0  -  5825.0 0.3917  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 27cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes. Software Defined Radio.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 4OrO/XsflWTGgmVwrgYb/Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 11/20/2025

Application Dated: 11/18/2025
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKMU6CR2417
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9136I Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.263  
CC DR MO ND 15E 5260.0  -  5320.0 0.1782  
CC DR MO ND 15E 5500.0  -  5720.0 0.2377  
CC MO 15E 5745.0  -  5825.0 0.3917  

Class III Permissive Change described in this filing. Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 27cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes. Software Defined Radio.

The purpose of this Class III Permissive Change requests to enable Ultra-Reliable Wireless Backhaul (URWB) technology, which introduces two additional DFS modes: Point-to-Multipoint (P2MP) and Client with Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.
DR: Data referencing guidance is used in this application
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).