FCC ID LDKNVTX21737

LDK-NVTX21737, LDK NVTX21737, LDKNVTX21737, LDKNVTX2I737

Cisco Systems Inc Embedded System Module NVTX21737


An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: LDKNVTX21737 is LDK. The remaining characters of the FCC ID, NVTX21737, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Embedded System Module

App # Purpose Date Unique ID
1 Change in Identification 2018-04-20 zpc8EqIjzIFIYKr0wFB+Aw==
2 Change in Identification 2018-04-20 +FH3zBPCOs+xfmrvMw+S+A==
3 Change in Identification 2018-04-20 hHh0OA9I55Tkb6ITrK6wPw==
4 Class II Permissive Change 2018-08-03 DR6osvpkAAtj3ngEM3UlnA==
5 Class II Permissive Change 2018-08-03 lK8IVUMpTKAjSu173W2g1g==
6 Class II Permissive Change 2018-08-03 37N6+U0UNR74x8qrGVGmGg==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: LTE 255,Unlicensed NII-3 DOWN | LTE 46,TD Unlicensed DOWN |
Frequency RangePower OutputRule PartsGrant Notes App #
2.402-2.48 GHz Bluetooth7.3 mW15C 2.1
2.402-2.48 GHz Bluetooth3.4 mW15C 3.1
2.402-2.48 GHz Bluetooth7.3 mW15C 4.1
2.402-2.48 GHz Bluetooth3.4 mW15C 6.1
2.412-2.472 GHz 2.4 GHz WiFi69.8 mW15CMO 3.2
2.412-2.472 GHz 2.4 GHz WiFi69.8 mW15CMO 6.2
5.18-5.24 GHz 5 GHz WiFi39.9 mW15EMO 1.1
5.18-5.24 GHz 5 GHz WiFi39.9 mW15EMO 5.1
5.26-5.32 GHz 5 GHz WiFi DFS83.2 mW15EMO, ND 1.2
5.26-5.32 GHz 5 GHz WiFi DFS83.2 mW15EMO, ND 5.2
5.5-5.7 GHz 5 GHz WiFi85.3 mW15EMO, ND 1.3
5.5-5.7 GHz 5 GHz WiFi85.3 mW15EMO, ND 5.3
5.745-5.825 GHz 5 GHz WiFi83.4 mW15EMO 1.4
5.745-5.825 GHz 5 GHz WiFi83.4 mW15EMO 5.4

Exhibits

Available Exhibits

App # Document Type Submitted
Available
5 Test ReportTest Report
Adobe Acrobat PDF (5951 kB)
2018-08-03
2018-08-03
5 Test Setup PhotosTest Setup Photos
Adobe Acrobat PDF (461 kB)
2018-08-03
2018-08-03
5 Operational DescriptionOperational Description
Adobe Acrobat PDF (354 kB)
2018-08-03
2018-08-03
5 Label and Label locationID Label/Location Info
Adobe Acrobat PDF (504 kB)
2018-08-03
2018-08-03
5 External PhotosExternal Photos
Adobe Acrobat PDF (2860 kB)
2018-08-03
2018-08-03
5 Cover LettersCover Letter(s)
Adobe Acrobat PDF (125 kB)
2018-08-03
2018-08-03
6 Test ReportTest Report
Adobe Acrobat PDF (3100 kB)
2018-08-03
2018-08-03
6 Test Setup photosTest Setup Photos
Adobe Acrobat PDF (461 kB)
2018-08-03
2018-08-03
6 Label and Label LocationID Label/Location Info
Adobe Acrobat PDF (504 kB)
2018-08-03
2018-08-03
6 External photosExternal Photos
Adobe Acrobat PDF (2860 kB)
2018-08-03
2018-08-03
6 Cover LettersCover Letter(s)
Adobe Acrobat PDF (125 kB)
2018-08-03
2018-08-03
4 Test reportTest Report
Adobe Acrobat PDF (776 kB)
2018-08-03
2018-08-03
4 Test Setup PhotosTest Setup Photos
Adobe Acrobat PDF (461 kB)
2018-08-03
2018-08-03
4 RF Exposure infoRF Exposure Info
Adobe Acrobat PDF (338 kB)
2018-08-03
2018-08-03
4 Label and Label LocationID Label/Location Info
Adobe Acrobat PDF (504 kB)
2018-08-03
2018-08-03
4 External PhotosExternal Photos
Adobe Acrobat PDF (2860 kB)
2018-08-03
2018-08-03
4 Cover LettersCover Letter(s)
Adobe Acrobat PDF (125 kB)
2018-08-03
2018-08-03
1 Label and Label LocationID Label/Location Info
Adobe Acrobat PDF (65 kB)
2018-04-20
2018-04-20
1 External PhotosExternal Photos
Adobe Acrobat PDF (130 kB)
2018-04-20
2018-04-20
1 Cover LettersCover Letter(s)
Adobe Acrobat PDF (344 kB)
2018-04-20
2018-04-20
3 Label and Label LocationID Label/Location Info
Adobe Acrobat PDF (65 kB)
2018-04-20
2018-04-20
3 External PhotosExternal Photos
Adobe Acrobat PDF (130 kB)
2018-04-20
2018-04-20
3 Cover LettersCover Letter(s)
Adobe Acrobat PDF (344 kB)
2018-04-20
2018-04-20
2 Label and Label LocationID Label/Location Info
Adobe Acrobat PDF (65 kB)
2018-04-20
2018-04-20
2 External PhotosExternal Photos
Adobe Acrobat PDF (130 kB)
2018-04-20
2018-04-20
2 Cover LettersCover Letter(s)
Adobe Acrobat PDF (344 kB)
2018-04-20
2018-04-20

APP # 5 (2018-08-03)

App # Document Type Submitted
Available
5 Test Report Test Report
Adobe Acrobat PDF (5951 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
5 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (461 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
5 Operational Description Operational Description
Adobe Acrobat PDF (354 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
5 Label and Label location ID Label/Location Info
Adobe Acrobat PDF (504 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
5 External Photos External Photos
Adobe Acrobat PDF (2860 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
5 Cover Letters Cover Letter(s)
Adobe Acrobat PDF (125 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00

APP # 6 (2018-08-03)

App # Document Type Submitted
Available
6 Test Report Test Report
Adobe Acrobat PDF (3100 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
6 Test Setup photos Test Setup Photos
Adobe Acrobat PDF (461 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
6 Label and Label Location ID Label/Location Info
Adobe Acrobat PDF (504 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
6 External photos External Photos
Adobe Acrobat PDF (2860 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
6 Cover Letters Cover Letter(s)
Adobe Acrobat PDF (125 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00

APP # 4 (2018-08-03)

App # Document Type Submitted
Available
4 Test report Test Report
Adobe Acrobat PDF (776 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
4 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (461 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
4 RF Exposure info RF Exposure Info
Adobe Acrobat PDF (338 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
4 Label and Label Location ID Label/Location Info
Adobe Acrobat PDF (504 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
4 External Photos External Photos
Adobe Acrobat PDF (2860 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
4 Cover Letters Cover Letter(s)
Adobe Acrobat PDF (125 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00

APP # 1 (2018-04-20)

App # Document Type Submitted
Available
1 Label and Label Location ID Label/Location Info
Adobe Acrobat PDF (65 kB)
2018-04-20 00:00:00
2018-04-20 00:00:00
1 External Photos External Photos
Adobe Acrobat PDF (130 kB)
2018-04-20 00:00:00
2018-04-20 00:00:00
1 Cover Letters Cover Letter(s)
Adobe Acrobat PDF (344 kB)
2018-04-20 00:00:00
2018-04-20 00:00:00

APP # 3 (2018-04-20)

App # Document Type Submitted
Available
3 Label and Label Location ID Label/Location Info
Adobe Acrobat PDF (65 kB)
2018-04-20 00:00:00
2018-04-20 00:00:00
3 External Photos External Photos
Adobe Acrobat PDF (130 kB)
2018-04-20 00:00:00
2018-04-20 00:00:00
3 Cover Letters Cover Letter(s)
Adobe Acrobat PDF (344 kB)
2018-04-20 00:00:00
2018-04-20 00:00:00

APP # 2 (2018-04-20)

App # Document Type Submitted
Available
2 Label and Label Location ID Label/Location Info
Adobe Acrobat PDF (65 kB)
2018-04-20 00:00:00
2018-04-20 00:00:00
2 External Photos External Photos
Adobe Acrobat PDF (130 kB)
2018-04-20 00:00:00
2018-04-20 00:00:00
2 Cover Letters Cover Letter(s)
Adobe Acrobat PDF (344 kB)
2018-04-20 00:00:00
2018-04-20 00:00:00

APP # 6 (2018-08-03)

App # Document Type Submitted
Available
6 Operational Description Operational Description
Adobe Acrobat PDF (354 kB)
2018-08-03 00:00:00
N/A

APP # 4 (2018-08-03)

App # Document Type Submitted
Available
4 Operational Description Operational Description
Adobe Acrobat PDF (354 kB)
2018-08-03 00:00:00
N/A

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Cisco Systems Inc
FCC Registration Number (FRN): 0004968939
Alphanumeric FCC ID: LDKNVTX21737
Unique Application Identifier: zpc8EqIjzIFIYKr0wFB+Aw==
Line one: 125 West Tasman Drive
City: San Jose
State: California
Country: United States
Zip Code: 95134-1706

TCB Information
TCB Application Email Address: Stuart.Beck@nemko.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: LDK
Product Code: NVTX21737

Person at the applicant's address to receive grant or for contact
Name: Gerard Thorpe
Title: Manager, Engineering
Telephone Number: 408-527-7097 Extension:
Fax Number: 408-527-7097
Email: gthorpe@cisco.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Embedded System Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Change in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/2017

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Verification Services Inc. (formerly UL CCS)
First Name:   Nancy
Last Name:   Gruspe
Telephone Number: 510-319-4053 Extension:
Fax Number:  000-000-0000
E-mail:  nancy.gruspe@ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Guangmin Ouyang
Title of authorized signature:  Compliance Engineering

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Cisco Systems Inc
FCC Registration Number (FRN): 0004968939
Alphanumeric FCC ID: LDKNVTX21737
Unique Application Identifier: +FH3zBPCOs+xfmrvMw+S+A==
Line one: 125 West Tasman Drive
City: San Jose
State: California
Country: United States
Zip Code: 95134-1706

TCB Information
TCB Application Email Address: Stuart.Beck@nemko.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: LDK
Product Code: NVTX21737

Person at the applicant's address to receive grant or for contact
Name: Gerard Thorpe
Title: Manager, Engineering
Telephone Number: 408-527-7097 Extension:
Fax Number: 408-527-7097
Email: gthorpe@cisco.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Embedded System Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Change in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/2017

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Verification Services Inc. (formerly UL CCS)
First Name:   Nancy
Last Name:   Gruspe
Telephone Number: 510-319-4053 Extension:
Fax Number:  000-000-0000
E-mail:  nancy.gruspe@ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  GuangMin Ouyang
Title of authorized signature:  Compliance Engineering

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Cisco Systems Inc
FCC Registration Number (FRN): 0004968939
Alphanumeric FCC ID: LDKNVTX21737
Unique Application Identifier: hHh0OA9I55Tkb6ITrK6wPw==
Line one: 125 West Tasman Drive
City: San Jose
State: California
Country: United States
Zip Code: 95134-1706

TCB Information
TCB Application Email Address: Stuart.Beck@nemko.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: LDK
Product Code: NVTX21737

Person at the applicant's address to receive grant or for contact
Name: Gerard Thorpe
Title: Manager, Engineering
Telephone Number: 408-527-7097 Extension:
Fax Number: 408-527-7097
Email: gthorpe@cisco.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Embedded System Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Change in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/2017

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Verification Services Inc. (formerly UL CCS)
First Name:   Nancy
Last Name:   Gruspe
Telephone Number: 510-319-4053 Extension:
Fax Number:  000-000-0000
E-mail:  nancy.gruspe@ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  GuangMin Ougang
Title of authorized signature:  Compliance Engineering

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Cisco Systems Inc
FCC Registration Number (FRN): 0004968939
Alphanumeric FCC ID: LDKNVTX21737
Unique Application Identifier: DR6osvpkAAtj3ngEM3UlnA==
Line one: 125 West Tasman Drive
City: San Jose
State: California
Country: United States
Zip Code: 95134-1706

TCB Information
TCB Application Email Address: Stuart.Beck@nemko.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: LDK
Product Code: NVTX21737

Person at the applicant's address to receive grant or for contact
Name: Gerard Thorpe
Title: Manager, Engineering
Telephone Number: 408-527-7097 Extension:
Fax Number: 408-527-7097
Email: gthorpe@cisco.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Embedded System Module with WLAN 2x2 MIMO 802.11a/b/g/n/ac and Bluetooth

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Nemko AS
First Name:   Helena
Last Name:   Vogl
Telephone Number: +4722960330 Extension:
E-mail:  Helena.Vogl@nemko.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to integrate this module into host platform, Cisco Webex Room 70S G2 & Cisco Webex Room 70D G2 and antennas as described in this filing. Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Guangmin Ouyang
Title of authorized signature:  Compliance Engineering

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Cisco Systems Inc
FCC Registration Number (FRN): 0004968939
Alphanumeric FCC ID: LDKNVTX21737
Unique Application Identifier: lK8IVUMpTKAjSu173W2g1g==
Line one: 125 West Tasman Drive
City: San Jose
State: California
Country: United States
Zip Code: 95134-1706

TCB Information
TCB Application Email Address: Stuart.Beck@nemko.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: LDK
Product Code: NVTX21737

Person at the applicant's address to receive grant or for contact
Name: Gerard Thorpe
Title: Manager, Engineering
Telephone Number: 408-527-7097 Extension:
Fax Number: 408-527-7097
Email: gthorpe@cisco.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Digital video encoder/decoder with WLAN 2x2 MIMO 802.11a/b/g/n/ac and Bluetooth

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Nemko AS
First Name:   Helena
Last Name:   Vogl
Telephone Number: +4722960330 Extension:
E-mail:  Helena.Vogl@nemko.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to integrate this module into host platform, Cisco Webex Room 70S G2 & Cisco Webex Room 70D G2 and antennas as described in this filing. Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Guangmin Ouyang
Title of authorized signature:  Compliance Engineering

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Cisco Systems Inc
FCC Registration Number (FRN): 0004968939
Alphanumeric FCC ID: LDKNVTX21737
Unique Application Identifier: 37N6+U0UNR74x8qrGVGmGg==
Line one: 125 West Tasman Drive
City: San Jose
State: California
Country: United States
Zip Code: 95134-1706

TCB Information
TCB Application Email Address: Stuart.Beck@nemko.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: LDK
Product Code: NVTX21737

Person at the applicant's address to receive grant or for contact
Name: Gerard Thorpe
Title: Manager, Engineering
Telephone Number: 408-527-7097 Extension:
Fax Number: 408-527-7097
Email: gthorpe@cisco.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Embedded System Module with WLAN 2x2 MIMO 802.11a/b/g/n/ac and Bluetooth

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Nemko AS
First Name:   Helena
Last Name:   Vogl
Telephone Number: +4722960330 Extension:
E-mail:  Helena.Vogl@nemko.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to integrate this module into host platform, Cisco Webex Room 70S G2 & Cisco Webex Room 70D G2 and antennas as described in this filing. Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Guangmin Ouyang
Title of authorized signature:  Compliance Engineering

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 04/20/2018

Application Dated: 04/20/2018
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKNVTX21737
Name of Grantee:  Cisco Systems Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Embedded System Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0073  

Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 04/20/2018

Application Dated: 04/20/2018
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKNVTX21737
Name of Grantee:  Cisco Systems Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Embedded System Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0073  

Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.



Mail To:


EA809346
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 08/03/2018

Application Dated: 08/03/2018
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKNVTX21737
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Embedded System Module with WLAN 2x2 MIMO 802.11a/b/g/n/ac and Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0034  
MO 15C 2412.0  -  2472.0 0.0698  

Class II Permissive Change to integrate this module into host platform, Cisco Webex Room 70S G2 & Cisco Webex Room 70D G2 and antennas as described in this filing.

Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 08/03/2018

Application Dated: 08/03/2018
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKNVTX21737
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Embedded System Module with WLAN 2x2 MIMO 802.11a/b/g/n/ac and Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0034  
MO 15C 2412.0  -  2472.0 0.0698  

Class II Permissive Change to integrate this module into host platform, Cisco Webex Room 70S G2 & Cisco Webex Room 70D G2 and antennas as described in this filing.

Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA850653
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 08/03/2018

Application Dated: 08/03/2018
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKNVTX21737
Name of Grantee:  Cisco Systems Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Embedded System Module with WLAN 2x2 MIMO 802.11a/b/g/n/ac and Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0073  

Class II Permissive Change to integrate this module into host platform, Cisco Webex Room 70S G2 & Cisco Webex Room 70D G2 and antennas as described in this filing.

Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 08/03/2018

Application Dated: 08/03/2018
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKNVTX21737
Name of Grantee:  Cisco Systems Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Embedded System Module with WLAN 2x2 MIMO 802.11a/b/g/n/ac and Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0073  

Class II Permissive Change to integrate this module into host platform, Cisco Webex Room 70S G2 & Cisco Webex Room 70D G2 and antennas as described in this filing.

Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.



Mail To:


EA400454
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 04/20/2018

Application Dated: 04/20/2018
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKNVTX21737
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Embedded System Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0034  
MO 15C 2412.0  -  2472.0 0.0698  

Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 04/20/2018

Application Dated: 04/20/2018
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKNVTX21737
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Embedded System Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0034  
MO 15C 2412.0  -  2472.0 0.0698  

Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA972986
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 08/03/2018

Application Dated: 08/03/2018
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKNVTX21737
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Digital video encoder/decoder with WLAN 2x2 MIMO 802.11a/b/g/n/ac and Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5240.0 0.0399  
MO ND 15E 5260.0  -  5320.0 0.0832  
MO ND 15E 5500.0  -  5700.0 0.0853  
MO 15E 5745.0  -  5825.0 0.0834  

Class II Permissive Change to integrate this module into host platform, Cisco Webex Room 70S G2 & Cisco Webex Room 70D G2 and antennas as described in this filing.

Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 08/03/2018

Application Dated: 08/03/2018
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKNVTX21737
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Digital video encoder/decoder with WLAN 2x2 MIMO 802.11a/b/g/n/ac and Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5240.0 0.0399  
MO ND 15E 5260.0  -  5320.0 0.0832  
MO ND 15E 5500.0  -  5700.0 0.0853  
MO 15E 5745.0  -  5825.0 0.0834  

Class II Permissive Change to integrate this module into host platform, Cisco Webex Room 70S G2 & Cisco Webex Room 70D G2 and antennas as described in this filing.

Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA462045
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 04/20/2018

Application Dated: 04/20/2018
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKNVTX21737
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Embedded System Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5240.0 0.0399  
MO ND 15E 5260.0  -  5320.0 0.0832  
MO ND 15E 5500.0  -  5700.0 0.0853  
MO 15E 5745.0  -  5825.0 0.0834  

Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 04/20/2018

Application Dated: 04/20/2018
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKNVTX21737
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Embedded System Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5240.0 0.0399  
MO ND 15E 5260.0  -  5320.0 0.0832  
MO ND 15E 5500.0  -  5700.0 0.0853  
MO 15E 5745.0  -  5825.0 0.0834  

Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA450798

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details


Facebook Twitter Google+ RSS © FCCID.io 2018