1. FCC ID
  2. LDK
  3. LDKRTPRO0350

FCC ID LDKRTPRO0350

Wireless IP Phone

by Cisco Systems Inc

Grantee Code: LDK   Product Code: RTPRO0350
Latest application date: 2016-06-02

FCC ID Device Details

FCC IDLDKRTPRO0350
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLDK
Product CodeRTPRO0350
Applicant BusinessCisco Systems Inc 🇺🇸
Related Domains cisco.com
Equipment ClassWireless IP Phone
Test FirmCisco Systems, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-06-02
5180-5240 MHzOriginal Equipment2009-09-21
2402-2480 MHzOriginal Equipment2009-09-21
2412-2462 MHzOriginal Equipment2009-09-21

Exhibits

DocumentTypeAvailableFile
User Manual 1Users Manual2009-09-21PDF 4 MB
User Manual 2Users Manual2009-09-21PDF 4.1 MB
User Manual 3Users Manual2009-09-21PDF 4.4 MB
User Manual 4Users Manual2009-09-21PDF 3.8 MB
User Manual 5Users Manual2009-09-21PDF 731.1 KB
Internal PhotosInternal Photos2009-09-21PDF 4.8 MB
External PhotosExternal Photos2009-09-21PDF 2.7 MB
Label and LocationID Label/Location Info2009-09-21PDF 211.9 KB
Test PhotosTest Setup Photos2016-06-02PDF 181.5 KB
Test Setup PhotosTest Setup Photos2009-09-21PDF 154.8 KB
Test Report Revised 060116Test Report2016-06-02PDF 1.8 MB
Test ReportTest Report2009-09-21PDF 1.2 MB
Test ReportTest Report2009-09-21PDF 2.6 MB
Test Report DFSTest Report2009-09-21PDF 296.1 KB
Test Report NII Part 1Test Report2009-09-21PDF 2 MB
Test Report NII Part 2Test Report2009-09-21PDF 3.6 MB
Confidentiality LetterCover Letter(s)2016-06-02PDF 119.8 KB
Cover Letter 1Cover Letter(s)2016-06-02PDF 50.7 KB
Cover Letter 2Cover Letter(s)2016-06-02PDF 60.8 KB
Authorization LetterCover Letter(s)2009-09-21PDF 16.4 KB
Confidentiality LetterCover Letter(s)2009-09-21PDF 16.5 KB
RF Exposure MPERF Exposure Info2009-09-21PDF 88.6 KB
Software Security D02 Info Revised Metadata onlyOperational DescriptionPDF 112.8 KB

Application Information

Application IDbsQqTxHZviEDF/gqiGzZOw==
Final Action Date2016-06-02
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004968939
ModelRTPRO0350
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless IP Phone
Responsible PartySamuel Kim, Manager, Engineering, samukim@cisco.com , 408-527-1446
Technical ContactJose Aguirre, CISCO Systems, Inc., joaguirr@cisco.com , 4085250835
Non-Technical ContactLisa Bevington, CISCO Systems, Inc., lbevingt@cisco.com , 4088539174
Test FirmGerald Thorpe, Cisco Systems, Inc., gthorpe@cisco.com , 408-525-7602
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device enabled for either 2.4 or 5 GHz band operations. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(i) for devices with no changes to hardware or output power.

Applications

Application IDDatePurpose
bsQqTxHZviEDF/gqiGzZOw==2016-06-02Class II permissive change or modification of presently authorized equipment
o8Hz+qniijLiqImXa3teuA==2009-09-21Original Equipment
eHSrhSR60LW5/mDJLnYy5A==2009-09-21Original Equipment
CxY6r5Ery3Dhje1aEAjIJQ==2009-09-21Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002000015CCC
2412-2462 MHz0.04215CCC
5180-5240 MHz0.03215E38, CC
5180-5240 MHz0.03215ECC
5260-5320 MHz0.03315E38, CC, ND
5260-5320 MHz0.03315ECC, ND
5500-5700 MHz0.03515E38, CC, ND
5500-5700 MHz0.03515ECC
5745-5805 MHz0.0615CCC
5745-5805 MHz0.05715E38, CC

Grants

TCB Grant - Application o8Hz+qniijLiqImXa3teuA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 09/21/2009

Application Dated: 09/21/2009
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKRTPRO0350
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless IP Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.032  
CC ND 15E 5260.0  -  5320.0 0.033  
CC 15E 5500.0  -  5700.0 0.035  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Within the 5.15-5.25 GHz band device is restricted to indoor use only. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application o8Hz+qniijLiqImXa3teuA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States 		  Date of Grant: 09/21/2009

Application Dated: 09/21/2009
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKRTPRO0350
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless IP Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.032  
CC ND 15E 5260.0  -  5320.0 0.033  
CC 15E 5500.0  -  5700.0 0.035  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Within the 5.15-5.25 GHz band device is restricted to indoor use only. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application eHSrhSR60LW5/mDJLnYy5A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 09/21/2009

Application Dated: 09/21/2009
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKRTPRO0350
Name of Grantee:  Cisco Systems Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless IP Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  

Power output is conducted.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application eHSrhSR60LW5/mDJLnYy5A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States 		  Date of Grant: 09/21/2009

Application Dated: 09/21/2009
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKRTPRO0350
Name of Grantee:  Cisco Systems Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless IP Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  

Power output is conducted.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application CxY6r5Ery3Dhje1aEAjIJQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 09/21/2009

Application Dated: 09/21/2009
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKRTPRO0350
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Wireless IP Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.042  
CC 15C 5745.0  -  5805.0 0.06  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application CxY6r5Ery3Dhje1aEAjIJQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States 		  Date of Grant: 09/21/2009

Application Dated: 09/21/2009
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKRTPRO0350
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Wireless IP Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.042  
CC 15C 5745.0  -  5805.0 0.06  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application bsQqTxHZviEDF/gqiGzZOw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 06/02/2016

Application Dated: 06/02/2016
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKRTPRO0350
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless IP Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.032  
38 CC ND 15E 5260.0  -  5320.0 0.033  
38 CC ND 15E 5500.0  -  5700.0 0.035  
38 CC 15E 5745.0  -  5805.0 0.057  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device enabled for either 2.4 or 5 GHz band operations.

This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(i) for devices with no changes to hardware or output power.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application bsQqTxHZviEDF/gqiGzZOw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States 		  Date of Grant: 06/02/2016

Application Dated: 06/02/2016
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKRTPRO0350
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless IP Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.032  
38 CC ND 15E 5260.0  -  5320.0 0.033  
38 CC ND 15E 5500.0  -  5700.0 0.035  
38 CC 15E 5745.0  -  5805.0 0.057  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device enabled for either 2.4 or 5 GHz band operations.

This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(i) for devices with no changes to hardware or output power.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: