FCC ID LDKSLTSP1905

Cisco Catalyst 9115AX Series

by Cisco Systems Inc

Grantee Code: LDK   Product Code: SLTSP1905
Latest application date: 2021-09-03

FCC ID Device Details

FCC IDLDKSLTSP1905
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLDK
Product CodeSLTSP1905
Applicant BusinessCisco Systems Inc 🇺🇸
Related Domains cisco.com
Equipment ClassCisco Catalyst 9115AX Series
Test FirmBay Area Compliance Laboratories Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-09-03
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-09-03
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-10-01
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-10-01
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-09-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-09-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-06-07
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-06-07
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-03-29
2402-2480 MHzOriginal Equipment2019-02-13
5745-5825 MHzOriginal Equipment2019-02-13

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-12-04PDF 2.1 MB
User ManualTest Setup Photos2019-12-04PDF 2.1 MB
User ManualUsers Manual2019-08-13PDF 2.5 MB
Internal PhotosInternal Photos2021-10-18PDF 756.6 KB
Int PhotosInternal Photos2019-12-04PDF 884.8 KB
Int PhotosInternal Photos2019-11-15PDF 1,021.7 KB
Int PhotosInternal Photos2019-10-19PDF 868.9 KB
Int PhotosInternal Photos2019-08-13PDF 1.5 MB
Ext PhotosExternal Photos2019-12-04PDF 1.8 MB
Ext PhotosExternal Photos2019-11-15PDF 519.6 KB
Ext PhotosExternal Photos2019-08-13PDF 1.4 MB
Label and LocationID Label/Location Info2021-09-03PDF 539.3 KB
FCC ID LabelID Label/Location Info2019-10-01PDF 156.2 KB
FCC ID LabelID Label/Location Info2019-09-04PDF 512.5 KB
FCC ID LabelID Label/Location Info2019-06-07PDF 156.2 KB
Test Report (W56)Schematics2019-06-07PDF 3 MB
Setup PhotosTest Setup Photos2021-10-18PDF 1.1 MB
Setup Photos (Conducted)Test Setup Photos2019-12-04PDF 175.8 KB
Setup Photos (Radiated)Test Setup Photos2019-12-04PDF 2.4 MB
Setup Photos (Radiated)Test Setup Photos2019-12-04PDF 2.4 MB
Setup PhotosTest Setup Photos2019-11-15PDF 1.1 MB
Setup PhotosTest Setup Photos2019-10-19PDF 1.2 MB
Setup PhotosTest Setup Photos2019-08-20PDF 565 KB
Setup PhotosTest Setup Photos2019-08-13PDF 118.1 KB
Setup PhotosTest Setup Photos2019-08-13PDF 551.4 KB
Test ReportTest Report2021-09-03PDF 1.5 MB
Test ReportTest Report2021-09-03PDF 1.8 MB
Test ReportTest Report2019-10-01PDF 751.8 KB
Test ReportTest Report2019-10-01PDF 488 KB
Test ReportTest Report2019-09-04PDF 700.5 KB
Test ReportTest Report2019-09-04PDF 458.2 KB
Test Report RevTest Report2019-09-04PDF 458.2 KB
Test Report (BLE)Test Report2019-06-07PDF 2.2 MB
Test Report (Radiated)Test Report2019-06-07PDF 412.3 KB
Test Report (Radiated)Test Report2019-06-07PDF 693.2 KB
Test Report (W52)Test Report2019-06-07PDF 2.7 MB
Test Report (W53)Test Report2019-06-07PDF 2.5 MB
Test Report (W58)Test Report2019-06-07PDF 3.2 MB
Test Report (Wi-Fi)Test Report2019-06-07PDF 3.4 MB
Test Report (DFS)Test Report2019-03-29PDF 3 MB
Test Report 5150-5250 MHzTest Report2019-03-29PDF 5.9 MB
Test Report 5250-5350 MHzTest Report2019-03-29PDF 2.8 MB
Test Report 5470-5725 MHzTest Report2019-03-29PDF 5.9 MB
Test ReportTest Report2019-02-13PDF 3.6 MB
Test Report (BLE)Test Report2019-02-13PDF 3.2 MB
Test Report (WLAN)Test Report2019-02-13PDF 4.6 MB
C2PC LetterCover Letter(s)2021-09-03PDF 70.3 KB
Confidentiality LetterCover Letter(s)2021-09-03PDF 94.9 KB
Authorization SignatureCover Letter(s)2019-10-01PDF 48.3 KB
C2PC LetterCover Letter(s)2019-10-01PDF 14.2 KB
Confidentiality LetterCover Letter(s)2019-10-01PDF 19.7 KB
Confidentiality LetterCover Letter(s)2019-09-04PDF 19.6 KB
C2PC LetterCover Letter(s)2019-06-07PDF 16.6 KB
Confidentiality LetterCover Letter(s)2019-06-07PDF 38.3 KB
C2PC LetterCover Letter(s)2019-03-29PDF 23.4 KB
Confidentiality LetterCover Letter(s)2019-03-29PDF 42 KB
Confidentiality LetterCover Letter(s)2019-02-13PDF 18.4 KB
Frequency Band DeclarationCover Letter(s)2019-02-13PDF 44.3 KB
RF Exposure ReportRF Exposure Info2021-09-03PDF 194 KB
RF ExposureRF Exposure Info2019-06-07PDF 44.1 KB
RF ExposureRF Exposure Info2019-06-07PDF 44 KB
RF ExposureRF Exposure Info2019-03-29PDF 139.3 KB
RF ExposureRF Exposure Info2019-02-13PDF 143.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 115.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 135 KB
Block Diagram Metadata onlyBlock DiagramPDF 421.5 KB
Schematics Metadata onlySchematicsPDF 1.9 MB
Schematics Metadata onlySchematicsPDF 1.3 MB
Schematics Metadata onlySchematicsPDF 713.3 KB
Schematics Metadata onlySchematicsPDF 2.6 MB
Antennas Spec Metadata onlyOperational DescriptionPDF 1.8 MB
Cisco PAG Re-use Request Metadata onlyOperational DescriptionPDF 56.5 KB
Opeation Description Metadata onlyOperational DescriptionPDF 486.5 KB
Operation Description Metadata onlyOperational DescriptionPDF 486.5 KB
Operation Description Metadata onlyOperational DescriptionPDF 489.3 KB
PAG Approval Metadata onlyOperational DescriptionPDF 40.9 KB
PAG R-use Letter Rev Metadata onlyOperational DescriptionPDF 57.9 KB
PAG Re-Use Metadata onlyOperational DescriptionPDF 57.9 KB
PAG Re-use Request Metadata onlyOperational DescriptionPDF 58.1 KB
PAG Reuse Letter Metadata onlyOperational DescriptionPDF 46 KB
Soft Security Declaration Metadata onlyOperational DescriptionPDF 25.5 KB
Software Security Declaration Metadata onlyOperational DescriptionPDF 24.2 KB
Software Security Declaration Metadata onlyOperational DescriptionPDF 27.1 KB
Software Security Description Metadata onlyOperational DescriptionPDF 26.5 KB

Application Information

Application IDxCD8IoX93GHuUiGb/8UDZQ==
Final Action Date2021-09-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004968939
ModelSLTSP1905
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionCisco Catalyst 9115AX Series
Responsible PartySamuel Kim, Manager, Engineering, samukim@cisco.com , 408-527-1446
Test FirmLisa Tang, Bay Area Compliance Laboratories Corporation, lisat@baclcorp.com , 408-732-9162
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/18/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II Permissive Change Described in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80 MHz bandwidth modes.

Applications

Application IDDatePurpose
xCD8IoX93GHuUiGb/8UDZQ==2021-09-03Class II permissive change or modification of presently authorized equipment
BvcjBhbjgKbEgMbJv3NIEQ==2021-09-03Class II permissive change or modification of presently authorized equipment
kyHkfjPysiPvOcJT/fic0A==2019-10-01Class II permissive change or modification of presently authorized equipment
2dIGv7tusNzzFrtWHED3Bg==2019-10-01Class II permissive change or modification of presently authorized equipment
svhMtQ8iuCjjCDWIawqc6w==2019-09-04Class II permissive change or modification of presently authorized equipment
o+7GKRVeusf6Hw72+gIlNQ==2019-09-04Class II permissive change or modification of presently authorized equipment
vU1BOUyjZA/fr+djoK5A7A==2019-06-07Class II permissive change or modification of presently authorized equipment
iUZiwjq1fwH3JF2fqOTVGQ==2019-06-07Class II permissive change or modification of presently authorized equipment
tsao706UdjyO1N5vp8X6ng==2019-03-29Class II permissive change or modification of presently authorized equipment
iY9C8HjvSNCbqIuxPe9M5A==2019-02-13Original Equipment
Q/0wEdfKyYv/ugmdJh3Pnw==2019-02-13Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00315CCC
2412-2462 MHz0.24315CCC, MO
5180-5240 MHz0.24815ECC, MO
5250 MHz0.10215ECC, MO, ND
5260-5320 MHz0.17515ECC, MO, ND
5270-5310 MHz0.1815ECC, MO, ND
5500-5720 MHz0.17415ECC, MO, ND
5510-5710 MHz0.19115ECC, MO, ND
5745-5825 MHz0.23915ECC, MO
5755-5795 MHz0.24815ECC, MO

Grants

TCB Grant - Application xCD8IoX93GHuUiGb/8UDZQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 09/03/2021

Application Dated: 09/03/2021
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9115AX Series
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.248  
CC MO ND 15E 5250.0  -  5250.0 0.102  
CC MO ND 15E 5260.0  -  5320.0 0.175  
CC MO ND 15E 5270.0  -  5310.0 0.18  
CC MO ND 15E 5500.0  -  5720.0 0.174  
CC MO ND 15E 5510.0  -  5710.0 0.191  
CC MO 15E 5745.0  -  5825.0 0.239  
CC MO 15E 5755.0  -  5795.0 0.248  

Class II Permissive Change Described in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application xCD8IoX93GHuUiGb/8UDZQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 09/03/2021

Application Dated: 09/03/2021
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9115AX Series
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.248  
CC MO ND 15E 5250.0  -  5250.0 0.102  
CC MO ND 15E 5260.0  -  5320.0 0.175  
CC MO ND 15E 5270.0  -  5310.0 0.18  
CC MO ND 15E 5500.0  -  5720.0 0.174  
CC MO ND 15E 5510.0  -  5710.0 0.191  
CC MO 15E 5745.0  -  5825.0 0.239  
CC MO 15E 5755.0  -  5795.0 0.248  

Class II Permissive Change Described in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application vU1BOUyjZA/fr+djoK5A7A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 06/07/2019

Application Dated: 06/07/2019
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Catalyst 9115AX Series
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  
CC MO 15C 2412.0  -  2462.0 0.243  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change application to change internal antennas to external antennas documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application vU1BOUyjZA/fr+djoK5A7A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 06/07/2019

Application Dated: 06/07/2019
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Catalyst 9115AX Series
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  
CC MO 15C 2412.0  -  2462.0 0.243  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change application to change internal antennas to external antennas documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application tsao706UdjyO1N5vp8X6ng==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 03/29/2019

Application Dated: 02/22/2019
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9115AX Series
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.248  
CC MO ND 15E 5250.0  -  5250.0 0.102  
CC MO ND 15E 5260.0  -  5320.0 0.175  
CC MO ND 15E 5270.0  -  5310.0 0.18  
CC MO ND 15E 5500.0  -  5720.0 0.174  
CC MO ND 15E 5510.0  -  5710.0 0.191  
CC MO 15E 5745.0  -  5825.0 0.239  
CC MO 15E 5755.0  -  5795.0 0.248  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80/160 MHz bandwidth modes.

Class II permissive change to add U-NII-1, U-NII-2A, and U-NII-2C frequency bands documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application tsao706UdjyO1N5vp8X6ng==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 03/29/2019

Application Dated: 02/22/2019
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9115AX Series
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.248  
CC MO ND 15E 5250.0  -  5250.0 0.102  
CC MO ND 15E 5260.0  -  5320.0 0.175  
CC MO ND 15E 5270.0  -  5310.0 0.18  
CC MO ND 15E 5500.0  -  5720.0 0.174  
CC MO ND 15E 5510.0  -  5710.0 0.191  
CC MO 15E 5745.0  -  5825.0 0.239  
CC MO 15E 5755.0  -  5795.0 0.248  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80/160 MHz bandwidth modes.

Class II permissive change to add U-NII-1, U-NII-2A, and U-NII-2C frequency bands documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application svhMtQ8iuCjjCDWIawqc6w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 09/04/2019

Application Dated: 09/04/2019
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9115AX Series
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.248  
CC MO ND 15E 5250.0  -  5250.0 0.102  
CC MO ND 15E 5260.0  -  5320.0 0.175  
CC MO ND 15E 5270.0  -  5310.0 0.18  
CC MO ND 15E 5500.0  -  5720.0 0.174  
CC MO ND 15E 5510.0  -  5710.0 0.191  
CC MO 15E 5745.0  -  5825.0 0.239  
CC MO 15E 5755.0  -  5795.0 0.248  

Class II Permissive Change application documented in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80/160 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application svhMtQ8iuCjjCDWIawqc6w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 09/04/2019

Application Dated: 09/04/2019
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9115AX Series
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.248  
CC MO ND 15E 5250.0  -  5250.0 0.102  
CC MO ND 15E 5260.0  -  5320.0 0.175  
CC MO ND 15E 5270.0  -  5310.0 0.18  
CC MO ND 15E 5500.0  -  5720.0 0.174  
CC MO ND 15E 5510.0  -  5710.0 0.191  
CC MO 15E 5745.0  -  5825.0 0.239  
CC MO 15E 5755.0  -  5795.0 0.248  

Class II Permissive Change application documented in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80/160 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application Q/0wEdfKyYv/ugmdJh3Pnw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/13/2019

Application Dated: 02/13/2019
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9115AX Series
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5745.0  -  5825.0 0.239  
CC MO 15E 5755.0  -  5795.0 0.248  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Q/0wEdfKyYv/ugmdJh3Pnw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 02/13/2019

Application Dated: 02/13/2019
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9115AX Series
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5745.0  -  5825.0 0.239  
CC MO 15E 5755.0  -  5795.0 0.248  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application o+7GKRVeusf6Hw72+gIlNQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 09/04/2019

Application Dated: 09/04/2019
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Catalyst 9115AX Series
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  
CC MO 15C 2412.0  -  2462.0 0.243  

Class II Permissive Change application documented in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application o+7GKRVeusf6Hw72+gIlNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 09/04/2019

Application Dated: 09/04/2019
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Catalyst 9115AX Series
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  
CC MO 15C 2412.0  -  2462.0 0.243  

Class II Permissive Change application documented in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application kyHkfjPysiPvOcJT/fic0A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 10/01/2019

Application Dated: 10/01/2019
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Catalyst 9115AX Series
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  
CC MO 15C 2412.0  -  2462.0 0.243  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change application documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application kyHkfjPysiPvOcJT/fic0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 10/01/2019

Application Dated: 10/01/2019
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Catalyst 9115AX Series
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  
CC MO 15C 2412.0  -  2462.0 0.243  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change application documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application iY9C8HjvSNCbqIuxPe9M5A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/13/2019

Application Dated: 02/13/2019
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Catalyst 9115AX Series
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  
CC MO 15C 2412.0  -  2462.0 0.243  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application iY9C8HjvSNCbqIuxPe9M5A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 02/13/2019

Application Dated: 02/13/2019
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Catalyst 9115AX Series
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  
CC MO 15C 2412.0  -  2462.0 0.243  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application iUZiwjq1fwH3JF2fqOTVGQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 06/07/2019

Application Dated: 06/07/2019
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9115AX Series
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.248  
CC MO ND 15E 5250.0  -  5250.0 0.102  
CC MO ND 15E 5260.0  -  5320.0 0.175  
CC MO ND 15E 5270.0  -  5310.0 0.18  
CC MO ND 15E 5500.0  -  5720.0 0.174  
CC MO ND 15E 5510.0  -  5710.0 0.191  
CC MO 15E 5745.0  -  5825.0 0.239  
CC MO 15E 5755.0  -  5795.0 0.248  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80/160 MHz bandwidth modes.

Class II Permissive Change application to change internal antennas to external antennas documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application iUZiwjq1fwH3JF2fqOTVGQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 06/07/2019

Application Dated: 06/07/2019
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9115AX Series
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.248  
CC MO ND 15E 5250.0  -  5250.0 0.102  
CC MO ND 15E 5260.0  -  5320.0 0.175  
CC MO ND 15E 5270.0  -  5310.0 0.18  
CC MO ND 15E 5500.0  -  5720.0 0.174  
CC MO ND 15E 5510.0  -  5710.0 0.191  
CC MO 15E 5745.0  -  5825.0 0.239  
CC MO 15E 5755.0  -  5795.0 0.248  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80/160 MHz bandwidth modes.

Class II Permissive Change application to change internal antennas to external antennas documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application BvcjBhbjgKbEgMbJv3NIEQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 09/03/2021

Application Dated: 09/03/2021
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Catalyst 9115AX Series
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.243  
CC 15C 2402.0  -  2480.0 0.003  

Class II Permissive Change application documented in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80/160 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application BvcjBhbjgKbEgMbJv3NIEQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 09/03/2021

Application Dated: 09/03/2021
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Catalyst 9115AX Series
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.243  
CC 15C 2402.0  -  2480.0 0.003  

Class II Permissive Change application documented in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80/160 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2dIGv7tusNzzFrtWHED3Bg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 10/01/2019

Application Dated: 10/01/2019
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9115AX Series
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.248  
CC MO ND 15E 5250.0  -  5250.0 0.102  
CC MO ND 15E 5260.0  -  5320.0 0.175  
CC MO ND 15E 5270.0  -  5310.0 0.18  
CC MO ND 15E 5500.0  -  5720.0 0.174  
CC MO ND 15E 5510.0  -  5710.0 0.191  
CC MO 15E 5745.0  -  5825.0 0.239  
CC MO 15E 5755.0  -  5795.0 0.248  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80/160 MHz bandwidth modes.

Class II Permissive Change application documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 2dIGv7tusNzzFrtWHED3Bg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 10/01/2019

Application Dated: 10/01/2019
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDKSLTSP1905
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Catalyst 9115AX Series
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.248  
CC MO ND 15E 5250.0  -  5250.0 0.102  
CC MO ND 15E 5260.0  -  5320.0 0.175  
CC MO ND 15E 5270.0  -  5310.0 0.18  
CC MO ND 15E 5500.0  -  5720.0 0.174  
CC MO ND 15E 5510.0  -  5710.0 0.191  
CC MO 15E 5745.0  -  5825.0 0.239  
CC MO 15E 5755.0  -  5795.0 0.248  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40/80/160 MHz bandwidth modes.

Class II Permissive Change application documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: