FCC ID LDKTG2050
802.11 a/b/g/n AP Module
by Cisco Systems Inc
Grantee Code: LDK Product Code: TG2050
Latest application date: 2016-05-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class III permissive change to software defined radio | 2016-05-27 |
| 5180-5240 MHz | Class III permissive change to software defined radio | 2012-12-14 |
| 2412-2462 MHz | Original Equipment | 2012-09-27 |
| 5180-5240 MHz | Original Equipment | 2012-09-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Host System configuration guide | Users Manual | 2012-09-01 | PDF 1.6 MB |
| Host manual part 1 | Users Manual | 2012-09-01 | PDF 4.9 MB |
| Host manual part 2 | Users Manual | 2012-09-01 | PDF 3.5 MB |
| Host system literature | Users Manual | 2012-09-01 | PDF 3.8 MB |
| Host system manual | Users Manual | 2012-09-01 | PDF 4.7 MB |
| Installation Guide | Users Manual | 2012-09-01 | PDF 5 MB |
| Internal Photo - top | Internal Photos | 2012-09-01 | PDF 170.5 KB |
| Internal Photos | Internal Photos | 2012-09-01 | PDF 941.2 KB |
| External Photograph 1 of 2 | External Photos | 2012-09-01 | PDF 122.6 KB |
| External Photograph 2 of 2 | External Photos | 2012-09-01 | PDF 106.5 KB |
| External Photogrpah 2 of 2 | External Photos | 2012-09-01 | PDF 106.5 KB |
| External photograph 1 of 2 | External Photos | 2012-09-01 | PDF 122.6 KB |
| Module Label | ID Label/Location Info | 2012-09-27 | PDF 40.5 KB |
| Module label location | ID Label/Location Info | 2012-09-27 | PDF 89.3 KB |
| Sample host label | ID Label/Location Info | 2012-09-27 | PDF 74.3 KB |
| Sample host label location | ID Label/Location Info | 2012-09-27 | PDF 519.1 KB |
| Antenna Specifications | Operational Description | 2012-09-27 | PDF 2 MB |
| Antenna specifcations | Operational Description | 2012-09-27 | PDF 290.3 KB |
| Antenna specifciations | Operational Description | 2012-09-27 | PDF 206.5 KB |
| Antenna specifications | Operational Description | 2012-09-27 | PDF 322.9 KB |
| Setup Photos | Test Setup Photos | 2012-12-14 | PDF 522.9 KB |
| Test Set Up Photos | Test Setup Photos | 2012-09-01 | PDF 327.1 KB |
| Test Set up photos | Test Setup Photos | 2012-09-01 | PDF 323.6 KB |
| Test Set up photos (out of band additional) | Test Setup Photos | 2012-09-01 | PDF 209.5 KB |
| 2016_05_23_FCC class 3 change request | Test Report | 2016-05-27 | PDF 52 KB |
| Class 3 change request Metadata only | Test Report | 2016-05-27 | PDF 48.6 KB |
| C3PC Report | Test Report | 2012-12-14 | PDF 4.3 MB |
| Test Report | Test Report | 2012-09-27 | PDF 1.8 MB |
| Test Report | Test Report | 2012-09-27 | PDF 4.1 MB |
| Test data - out of band emissions | Test Report | 2012-09-27 | PDF 305.2 KB |
| Authorization letter | Attestation Statements | 2016-05-27 | PDF 98.7 KB |
| Letter_of_authorization_FCC-1 | Attestation Statements | 2016-05-27 | PDF 163.6 KB |
| Professional Installation attestation | Attestation Statements | 2012-09-27 | PDF 35.6 KB |
| 2016_05_23_FCC class 3 change request | Cover Letter(s) | 2016-05-27 | PDF 52 KB |
| LT confidentiality | Cover Letter(s) | 2016-05-27 | PDF 54.4 KB |
| Authorized Signatories | Cover Letter(s) | 2012-12-14 | PDF 135.1 KB |
| C3PC Letter | Cover Letter(s) | 2012-12-14 | PDF 94.6 KB |
| Dated this request for confidentiality to the date it was created | Cover Letter(s) | 2012-12-14 | PDF 173.3 KB |
| Agent authorization | Cover Letter(s) | 2012-09-27 | PDF 16.7 KB |
| Confidentiality request | Cover Letter(s) | 2012-09-27 | PDF 87.8 KB |
| Confidentiality request (Short term) | Cover Letter(s) | 2012-09-27 | PDF 91.9 KB |
| Modular Approval Cover Letter | Cover Letter(s) | 2012-09-27 | PDF 9.4 KB |
| Signatory authorization | Cover Letter(s) | 2012-09-27 | PDF 135.1 KB |
| RF Exposure Report | RF Exposure Info | 2012-12-14 | PDF 286.4 KB |
| MPE Calculation | RF Exposure Info | 2012-09-27 | PDF 130.9 KB |
| KDB 594280 D02 v01r03 U-NII Device SW Security Statement Metadata only | Operational Description | PDF 169 KB | |
| TopGun Firmware Theory of Operation without DFS channels 05232016 Metadata only | Operational Description | PDF 600.1 KB | |
| TopGun Firmware Theory of Operation without DFS channels (revised 9-9-20... Metadata only | SDR Software/Security Inf | PDF 173.8 KB | |
| Antenna list Metadata only | Parts List/Tune Up Info | PDF 193.1 KB |
Application Information
| Application ID | iPG56sm+RXdpnpfB+BYZVw== |
|---|---|
| Final Action Date | 2016-05-27 |
| Application Purpose | Class III permissive change to software defined radio |
| Applicant FRN | 0004968939 |
| Model | TG2050 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11 a/b/g/n AP Module |
| Responsible Party | Samuel Kim, Manager, Engineering, samukim@cisco.com  , 408-527-1446 |
| Agent | Grace Grace Grace, UL Verifications Services Inc., grace.rincand@ul.com  , 5107711020 |
| Technical Contact | Grace Rincand, UL Verifications Services Inc., grace.rincand@ul.com , 5107711020 |
| Non-Technical Contact | Grace Rincand, UL Verifications Services Inc., grace.rincand@ul.com , 5107711020 |
| Test Firm | Jay Kogoma, UL Verification Services Inc. (formerly UL CCS), jay.kogoma@ul.com , 510-319-4135 |
| TCB Email | certnotice@ccsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class III Permissive Change. Limited modular approval. Output power is conducted. This device has 20 MHz and 40 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iPG56sm+RXdpnpfB+BYZVw== | 2016-05-27 | Class III permissive change to software defined radio |
| RftZgkWoAw1qJmj921cdsQ== | 2012-12-14 | Class III permissive change to software defined radio |
| OPmPVYlJ6bhKESfAs44yUw== | 2012-09-27 | Original Equipment |
| 6V0ynWIAvAYlrvOslCcp2w== | 2012-09-27 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application RftZgkWoAw1qJmj921cdsQ==
This application does not exist.
EAS Grant - Application RftZgkWoAw1qJmj921cdsQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 12/14/2012 Application Dated: 09/28/2012 |
| Attention: Gerard Thorpe , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKTG2050 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n AP Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5240.0 | 0.0247 | |||
| 15E | 5260.0 - 5320.0 | 0.0549 | |||
| 15E | 5500.0 - 5700.0 | 0.0668 | |||
| 15E | 5660.0 - 5700.0 | 0.0668 |
| Limited modular approval. Output power is conducted. This device has 20 MHz and 40 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Donn Foster, | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Cisco Systems Inc | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 170 West Tasman Drive | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| San Jose, CA 95134-1706 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/27/2012 Application Dated: 08/30/2012 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Gerard Thorpe , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKTG2050 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n AP Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.21577 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.3281 |
| Output power is conducted. Limited Modular Approval. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application OPmPVYlJ6bhKESfAs44yUw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 09/27/2012 Application Dated: 08/30/2012 |
| Attention: Gerard Thorpe , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKTG2050 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n AP Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.21577 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.3281 |
| Output power is conducted. Limited Modular Approval. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/27/2016 Application Dated: 05/19/2016 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKTG2050 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n AP Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 49 CC MO | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.3281 |
| Class III Permissive Change. Limited modular approval. Output power is conducted. This device has 20 MHz and 40 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application iPG56sm+RXdpnpfB+BYZVw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 05/27/2016 Application Dated: 05/19/2016 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKTG2050 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n AP Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 49 CC MO | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.3281 |
| Class III Permissive Change. Limited modular approval. Output power is conducted. This device has 20 MHz and 40 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/27/2012 Application Dated: 08/30/2012 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Gerard Thorpe , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKTG2050 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n AP Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.02466 |
| Output power is conducted. Limited Modular Approval. Operations in 5.15-5.25 GHz are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 6V0ynWIAvAYlrvOslCcp2w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 09/27/2012 Application Dated: 08/30/2012 |
| Attention: Gerard Thorpe , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKTG2050 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n AP Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.02466 |
| Output power is conducted. Limited Modular Approval. Operations in 5.15-5.25 GHz are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |