FCC ID LDKVEHVR2777
Cisco Catalyst 9136I Access Point
by Cisco Systems Inc
Grantee Code: LDK Product Code: VEHVR2777
Latest application date: 2025-09-29
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Class III permissive change to software defined radio | 2025-09-29 |
| 6535-6855 MHz | Class III permissive change to software defined radio | 2024-03-01 |
| 5180-5240 MHz | Original Equipment | 2023-07-19 |
| 2402-2480 MHz | Original Equipment | 2023-07-19 |
| 5955-7095 MHz | Original Equipment | 2023-07-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Geolocation General Description | Users Manual | 2024-08-28 | PDF 231.9 KB |
| User Manual | Users Manual | 2024-08-28 | PDF 911.2 KB |
| User Manual | Users Manual | 2024-01-15 | PDF 1.7 MB |
| Internal Photos | Internal Photos | 2024-08-28 | PDF 5 MB |
| External Photos | External Photos | 2024-08-28 | PDF 565.1 KB |
| Label and Label Location | ID Label/Location Info | 2025-09-29 | PDF 363.9 KB |
| Label | ID Label/Location Info | 2024-03-01 | PDF 361.3 KB |
| Labl | ID Label/Location Info | 2023-07-19 | PDF 361.3 KB |
| Test Setup Photos | Test Setup Photos | 2026-03-28 | PDF 847.4 KB |
| TSUP | Test Setup Photos | 2024-08-28 | PDF 991.3 KB |
| TSUP | Test Setup Photos | 2024-01-15 | PDF 1.1 MB |
| TSUP DFS | Test Setup Photos | 2024-01-15 | PDF 329.7 KB |
| TSUP DTS | Test Setup Photos | 2024-01-15 | PDF 674.2 KB |
| TSUP DTS BLE | Test Setup Photos | 2024-01-15 | PDF 631 KB |
| TSUP NII | Test Setup Photos | 2024-01-15 | PDF 638.7 KB |
| DFS Test Report Part 1 | Test Report | 2025-09-29 | PDF 5.1 MB |
| DFS Test Report Part 2 | Test Report | 2025-09-29 | PDF 5 MB |
| Test Harness Report AFC | Test Report | 2024-03-01 | PDF 1.7 MB |
| Test Report Antenna | Test Report | 2024-03-01 | PDF 2.7 MB |
| Test Report WLAN 6G 5+7 Part 1 | Test Report | 2024-03-01 | PDF 5.6 MB |
| Test Report WLAN 6G 5+7 Part 2 | Test Report | 2024-03-01 | PDF 5.7 MB |
| Test Report WLAN 6G 5+7 Part 3 | Test Report | 2024-03-01 | PDF 5.7 MB |
| Test Report WLAN 6G 5+7 Part 4 | Test Report | 2024-03-01 | PDF 5.7 MB |
| Test Report WLAN 6G 5+7 Part 5 | Test Report | 2024-03-01 | PDF 5.7 MB |
| Test Report WLAN 6G 5+7 Part 6 | Test Report | 2024-03-01 | PDF 3.1 MB |
| Test Report 6ID Part 1 | Test Report | 2023-07-19 | PDF 5.8 MB |
| Test Report 6ID Part 2 | Test Report | 2023-07-19 | PDF 5.7 MB |
| Test Report 6ID Part 3 | Test Report | 2023-07-19 | PDF 5.7 MB |
| Test Report 6ID Part 4 | Test Report | 2023-07-19 | PDF 5.7 MB |
| Test Report 6ID Part 5 | Test Report | 2023-07-19 | PDF 5.7 MB |
| Test Report 6ID Part 6 | Test Report | 2023-07-19 | PDF 5.7 MB |
| Test Report 6ID Part 7 | Test Report | 2023-07-19 | PDF 5.7 MB |
| Test Report 6ID Part 8 | Test Report | 2023-07-19 | PDF 5.7 MB |
| Test Report 6ID Part 9 | Test Report | 2023-07-19 | PDF 2.5 MB |
| Test Report DFS | Test Report | 2023-07-19 | PDF 4.1 MB |
| Test Report DTS BLE | Test Report | 2023-07-19 | PDF 3.4 MB |
| Test Report NII Part 1 | Test Report | 2023-07-19 | PDF 5.7 MB |
| Test Report NII Part 10 | Test Report | 2023-07-19 | PDF 5.8 MB |
| Test Report NII Part 11 | Test Report | 2023-07-19 | PDF 5.8 MB |
| Test Report NII Part 12 | Test Report | 2023-07-19 | PDF 1.1 MB |
| Test Report NII Part 2 | Test Report | 2023-07-19 | PDF 5.7 MB |
| Test Report NII Part 3 | Test Report | 2023-07-19 | PDF 5.8 MB |
| Test Report NII Part 4 | Test Report | 2023-07-19 | PDF 5.7 MB |
| Test Report NII Part 5 | Test Report | 2023-07-19 | PDF 5.8 MB |
| Test Report NII Part 6 | Test Report | 2023-07-19 | PDF 5.7 MB |
| Test Report NII Part 7 | Test Report | 2023-07-19 | PDF 5.8 MB |
| Test Report NII Part 8 | Test Report | 2023-07-19 | PDF 5.8 MB |
| Test Report NII Part 9 | Test Report | 2023-07-19 | PDF 5.8 MB |
| Test Report WLAN Part 1 | Test Report | 2023-07-19 | PDF 4.7 MB |
| Test Report WLAN Part 2 | Test Report | 2023-07-19 | PDF 4.8 MB |
| Test Report WLAN Part 3 | Test Report | 2023-07-19 | PDF 1.6 MB |
| 2.911(d)(5)(i) Attestation Statement | Attestation Statements | 2025-09-29 | PDF 142.6 KB |
| 2.911(d)(5)(ii) Attestation Statement | Attestation Statements | 2025-09-29 | PDF 143 KB |
| US Agent Attestation Letter | Attestation Statements | 2025-09-29 | PDF 137.1 KB |
| Attestation Statement part 2.911(d)(7) | Attestation Statements | 2024-03-01 | PDF 124.2 KB |
| Attstn Stmt part 2.911(d)(5)(i)&(ii) | Attestation Statements | 2024-03-01 | PDF 134.8 KB |
| WiFi 6E DOC | Attestation Statements | 2024-03-01 | PDF 123.6 KB |
| Attestation Statement part 2.911(d)(7) | Attestation Statements | 2023-07-19 | PDF 115.8 KB |
| Attestation Statements Part 2.911(d)(7) | Attestation Statements | 2023-07-19 | PDF 115.8 KB |
| Attstn Stmt part 2.911(d)(5)(i)&(ii) | Attestation Statements | 2023-07-19 | PDF 104.8 KB |
| Indoor Access Point | Attestation Statements | 2023-07-19 | PDF 110.1 KB |
| FCC Agent Authorization Letter | Cover Letter(s) | 2025-09-29 | PDF 134.4 KB |
| Permissive Change Declaration Letter | Cover Letter(s) | 2025-09-29 | PDF 113.8 KB |
| C3PC Letter | Cover Letter(s) | 2024-03-01 | PDF 49.6 KB |
| Confidentiality Letter II | Cover Letter(s) | 2024-03-01 | PDF 86.4 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2024-03-01 | PDF 153.9 KB |
| LOA Letter | Cover Letter(s) | 2024-03-01 | PDF 123.2 KB |
| WiFi 6E DOC Metadata only | Cover Letter(s) | 2024-03-01 | PDF 123.6 KB |
| Confidentiality Letter | Cover Letter(s) | 2023-07-19 | PDF 107.6 KB |
| POA Letter | Cover Letter(s) | 2023-07-19 | PDF 95.2 KB |
| RF Exposure Information | RF Exposure Info | 2025-09-29 | PDF 347.3 KB |
| RF Exposure MPE | RF Exposure Info | 2024-03-01 | PDF 450.9 KB |
| RF Exposure MPE | RF Exposure Info | 2023-07-19 | PDF 470.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 376.8 KB | |
| Block Diagrams Metadata only | Block Diagram | PDF 376.8 KB | |
| Schematics Metadata only | Schematics | PDF 3.7 MB | |
| Geolocation Justification Report Metadata only | Operational Description | PDF 1.5 MB | |
| Geolocation PIA Acceptance Metadata only | Operational Description | PDF 88 KB | |
| Operational Description Metadata only | Operational Description | PDF 2.5 MB | |
| Op Desc SDR Metadata only | SDR Software/Security Inf | PDF 523.3 KB | |
| Op Desc Software Security Metadata only | SDR Software/Security Info. | PDF 480.8 KB | |
| Op Desc Software Security Metadata only | SDR Software/Security Inf | PDF 480.8 KB | |
| PAG Checklist Metadata only | SDR Software/Security Info. | PDF 281.1 KB | |
| Software Defined Radio Description Metadata only | SDR Software/Security Info. | PDF 377.3 KB | |
| Software Security Description Metadata only | SDR Software/Security Info. | PDF 212.3 KB |
Application Information
| Application ID | 0isDlphNNlSvWKYKb1ZVgQ== |
|---|---|
| Final Action Date | 2025-09-29 |
| Application Purpose | Class III permissive change to software defined radio |
| Applicant FRN | 0004968939 |
| Model | VEHVR2777 |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Cisco Catalyst 9136I Access Point |
| Responsible Party | Samuel Kim, samukim@cisco.com  , 408-527-1446 |
| Test Firm | Lisa Tang, Bay Area Compliance Laboratories Corp., lisat@baclcorp.com  , 408-732-9162 |
| TCB Email | bacl.regulatory@baclcorp.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 0isDlphNNlSvWKYKb1ZVgQ== | 2025-09-29 | Class III permissive change to software defined radio |
| GY7BX05x900wGhfIxoEPDg== | 2024-03-01 | Class III permissive change to software defined radio |
| TT3dOM7jPeWk1mKAmiLWxw== | 2023-07-19 | Original Equipment |
| NAQwRMgHWATwcgjtRDdcZQ== | 2023-07-19 | Original Equipment |
| /2RLCVj+R2jk2QfL0GeJbA== | 2023-07-19 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application TT3dOM7jPeWk1mKAmiLWxw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/19/2023 Application Dated: 07/05/2023 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKVEHVR2777 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst 9136I Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.263 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1782 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.2377 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.3917 |
| Output Power listed is the maximum combined conducted output power. Software Defined Radio. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application TT3dOM7jPeWk1mKAmiLWxw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 07/19/2023 Application Dated: 07/05/2023 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKVEHVR2777 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst 9136I Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.263 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1782 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.2377 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.3917 |
| Output Power listed is the maximum combined conducted output power. Software Defined Radio. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/19/2023 Application Dated: 07/05/2023 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKVEHVR2777 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Catalyst 9136I Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0755 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2094 |
| Output Power listed is the maximum combined conducted output power. Software Defined Radio. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz bandwidth modes. Device is intended for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application NAQwRMgHWATwcgjtRDdcZQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 07/19/2023 Application Dated: 07/05/2023 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKVEHVR2777 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Catalyst 9136I Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0755 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2094 |
| Output Power listed is the maximum combined conducted output power. Software Defined Radio. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas used for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz bandwidth modes. Device is intended for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/01/2024 Application Dated: 02/08/2024 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKVEHVR2777 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | 15E 6 GHz Standard Power Access Point |
| Notes: | Cisco Catalyst 9136I Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 6415.0 | 3.281 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 2.958 |
| Power listed is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. Software Defined Radio. The antennas used for this device must be installed to provide a separation distance of at least 58 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Class III Permissive Change: Enables 6 GHz Standard Power Access Point operation via software update. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application GY7BX05x900wGhfIxoEPDg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 03/01/2024 Application Dated: 02/08/2024 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKVEHVR2777 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | 15E 6 GHz Standard Power Access Point |
| Notes: | Cisco Catalyst 9136I Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 6415.0 | 3.281 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 2.958 |
| Power listed is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. Software Defined Radio. The antennas used for this device must be installed to provide a separation distance of at least 58 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Class III Permissive Change: Enables 6 GHz Standard Power Access Point operation via software update. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 09/29/2025 Application Dated: 09/25/2025 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKVEHVR2777 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Catalyst 9136I Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.263 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1782 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.2377 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.3917 |
| Class III Permissive Change described in this filing. Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 27cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes. Software Defined Radio. The purpose of this Class III Permissive Change requests to enable Ultra-Reliable Wireless Backhaul (URWB) technology, which introduces two additional DFS modes: Point-to-Multipoint (P2MP) and Client with Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application /2RLCVj+R2jk2QfL0GeJbA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/19/2023 Application Dated: 07/05/2023 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKVEHVR2777 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | Cisco Catalyst 9136I Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7095.0 | 0.547 |
| Power listed is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. Software Defined Radio. The antennas used for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application /2RLCVj+R2jk2QfL0GeJbA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 07/19/2023 Application Dated: 07/05/2023 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDKVEHVR2777 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | Cisco Catalyst 9136I Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7095.0 | 0.547 |
| Power listed is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. Software Defined Radio. The antennas used for this device must be installed to provide a separation distance of at least 50 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |