FCC ID LHJ-FE4NA0210

FE4NA0210

by Continental Automotive Systems, Inc.

Grantee Code: LHJ   Product Code: FE4NA0210
Latest application date: 2023-07-03

FCC ID Device Details

FCC IDLHJ-FE4NA0210
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLHJ
Product CodeFE4NA0210
Applicant BusinessContinental Automotive Systems, Inc. 🇺🇸
Related Domains continental-corporation.com
Equipment ClassFE4NA0210
Test FirmSPORTON International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
729-768 MHzClass II permissive change or modification of presently authorized equipment2023-07-03
704-711 MHzClass II permissive change or modification of presently authorized equipment2023-07-03
1860-1900 MHzClass II permissive change or modification of presently authorized equipment2023-06-06
729-768 MHzClass II permissive change or modification of presently authorized equipment2023-03-16
704-711 MHzClass II permissive change or modification of presently authorized equipment2023-03-16
704-711 MHzClass II permissive change or modification of presently authorized equipment2022-08-16
729-768 MHzClass II permissive change or modification of presently authorized equipment2022-08-16
704-711 MHzClass II permissive change or modification of presently authorized equipment2022-02-17
729-768 MHzClass II permissive change or modification of presently authorized equipment2022-02-17
1860-1900 MHzClass II permissive change or modification of presently authorized equipment2022-01-25
729-768 MHzClass II permissive change or modification of presently authorized equipment2022-01-25
729-768 MHzClass II permissive change or modification of presently authorized equipment2021-06-02
704-711 MHzClass II permissive change or modification of presently authorized equipment2021-05-21
729-768 MHzClass II permissive change or modification of presently authorized equipment2021-05-21
704-711 MHzOriginal Equipment2020-07-31
729-768 MHzOriginal Equipment2020-07-31

Exhibits

DocumentTypeAvailableFile
User_Manual_NA_variant_model_G12N410G1_G12N410M1_Molex_848358_v1Users Manual2023-12-31PDF 540.6 KB
User_Manual_NA_variant_model_G12N400G1_C1YC2_C1YG2_v1Users Manual2023-12-04PDF 538.4 KB
User manual_UDA_variant_model_G12U400G1_for FCC_v1Users Manual2023-11-01PDF 443.3 KB
User_Manual_NA_variant_model_G12N400G1_BT1_BV1_v1Users Manual2023-09-13PDF 538.7 KB
User_Manual_NA_variant_model_G12N400G1Users Manual2023-02-13PDF 536.5 KB
Host UM Metadata onlyUsers Manual2022-08-16PDF 527.7 KB
User ManualUsers Manual2021-05-21PDF 549.9 KB
IntPho_1Internal Photos2023-11-01PDF 4.7 MB
IntPho_2Internal Photos2023-11-01PDF 1.4 MB
IntPhoInternal Photos2023-09-13PDF 1.5 MB
IntPhoInternal Photos2023-02-13PDF 4.1 MB
LHJ-FE4NA0210_IntPho_1 r1Internal Photos2022-01-25PDF 4.8 MB
LHJ-FE4NA0210_IntPho_2 r1Internal Photos2022-01-25PDF 2.2 MB
Internal PhotosInternal Photos2021-06-02PDF 1 MB
Internal PhotosInternal Photos2021-05-21PDF 1.3 MB
ExtPhoExternal Photos2023-12-31PDF 1,000.7 KB
EP260854-02_R01_FCCExternal Photos2023-12-04PDF 922.1 KB
ExtPhoExternal Photos2023-11-01PDF 1 MB
ExtPhoExternal Photos2023-02-13PDF 1.5 MB
LHJ-FE4NA0210_ExtPho Metadata onlyExternal Photos2022-08-16PDF 1.2 MB
LHJ-FE4NA0210_ExtPho r1External Photos2022-01-25PDF 1.5 MB
Host Label SampleID Label/Location Info2023-06-06PDF 119.2 KB
Host Label locationID Label/Location Info2023-06-06PDF 67.1 KB
Label locationID Label/Location Info2023-05-05PDF 67.1 KB
Label sampleID Label/Location Info2023-05-05PDF 84.8 KB
Host Label sampleID Label/Location Info2023-03-16PDF 119.2 KB
Host Label SampleID Label/Location Info2022-08-16PDF 149.8 KB
Host Label SampleID Label/Location Info2022-02-17PDF 155.9 KB
Host Label locationID Label/Location Info2022-02-17PDF 33.4 KB
LHJ-FE4NA0210_FCC SAR_Appendix D (photo)Test Setup Photos2023-12-31PDF 60.2 KB
FA260854-02_R01_FCC SAR_Appendix D (photoTest Setup Photos2023-12-04PDF 40.8 KB
LHJ-FE4NA0210_Tsup_JBPTest Setup Photos2023-11-01PDF 220.6 KB
LHJ-FE4NA0210_FCC SAR_Appendix D (photoTest Setup Photos2023-09-13PDF 46.4 KB
LHJ-FE4NA0210_Tsup_JBP, CXXTest Setup Photos2023-09-13PDF 231.5 KB
LHJ-FE4NA0210_Tsup_PCB_LTETest Setup Photos2023-09-13PDF 732.8 KB
LHJ-FE4NA0210_Tsup_PCB_LTE B14Test Setup Photos2023-09-13PDF 393.4 KB
LHJ-FE4NA0210_Tsup_PCB_WCDMATest Setup Photos2023-09-13PDF 454.8 KB
LHJ-FE4NA0210_Tsup_FCC SARTest Setup Photos2023-02-13PDF 35.6 KB
LHJ-FE4NA0210_Tsup_JBP, CXXTest Setup Photos2023-02-13PDF 231.7 KB
LHJ-FE4NA0210_Tsup_PCB_LTETest Setup Photos2023-02-13PDF 462.1 KB
LHJ-FE4NA0210_Tsup_PCB_LTE B14Test Setup Photos2023-02-13PDF 365.2 KB
LHJ-FE4NA0210_Tsup_PCB_WCDMATest Setup Photos2023-02-13PDF 486.4 KB
LHJ-FE4NA0210_Tsup_JBP, CXX Metadata onlyTest Setup Photos2022-08-16PDF 227.4 KB
LHJ-FE4NA0210_Tsup_PCB_LTE Metadata onlyTest Setup Photos2022-08-16PDF 223.5 KB
LHJ-FE4NA0210_Tsup_PCB_LTE B14 Metadata onlyTest Setup Photos2022-08-16PDF 248.1 KB
LHJ-FE4NA0210_Tsup_PCB_WCDMA Metadata onlyTest Setup Photos2022-08-16PDF 223.3 KB
LHJ-FE4NA0210_Tsup_JBP, CXXTest Setup Photos2022-01-25PDF 229.3 KB
LHJ-FE4NA0210_Tsup_PCB_LTETest Setup Photos2022-01-25PDF 323.6 KB
LHJ-FE4NA0210_Tsup_PCB_LTE B14Test Setup Photos2022-01-25PDF 323.6 KB
LHJ-FE4NA0210_Tsup_PCB_WCDMATest Setup Photos2022-01-25PDF 355.4 KB
Tsup CXXTest Setup Photos2021-06-02PDF 254.8 KB
Tsup_JBP, CXXTest Setup Photos2021-05-21PDF 231.7 KB
Tsup_PCB_LTETest Setup Photos2021-05-21PDF 233.3 KB
Tsup_PCB_LTE B14Test Setup Photos2021-05-21PDF 233.2 KB
Tsup_PCB_WCDMATest Setup Photos2021-05-21PDF 243.4 KB
LHJ-FE4NA0210_TR_JBPTest Report2023-05-05PDF 643.1 KB
LHJ-FE4NA0210_TR_JBP, CXXTest Report2023-03-16PDF 406.3 KB
LHJ-FE4NA0210_TR_PCB_LTETest Report2023-03-16PDF 1,021.7 KB
LHJ-FE4NA0210_TR_PCB_LTE B14Test Report2023-03-16PDF 886.8 KB
LHJ-FE4NA0210_TR_PCB_WCDMATest Report2023-03-16PDF 823.3 KB
LHJ-FE4NA0210_TR_JBP, CXX_r1Test Report2022-08-16PDF 616.1 KB
LHJ-FE4NA0210_TR_PCB_LTE B14_r1Test Report2022-08-16PDF 760.2 KB
LHJ-FE4NA0210_TR_PCB_LTE_r1Test Report2022-08-16PDF 1 MB
LHJ-FE4NA0210_TR_PCB_WCDMA_r1Test Report2022-08-16PDF 848.3 KB
LHJ-FE4NA0210_TR_JBP, CXXTest Report2022-02-17PDF 494.2 KB
LHJ-FE4NA0210_TR_PCB_LTE B14 r1Test Report2022-02-17PDF 471.4 KB
LHJ-FE4NA0210_TR_PCB_LTE r1Test Report2022-02-17PDF 832.8 KB
LHJ-FE4NA0210_TR_PCB_WCDMA r1Test Report2022-02-17PDF 671.9 KB
LHJ-FE4NA0210_TR_JBP, CXX r1Test Report2022-01-25PDF 494.3 KB
LHJ-FE4NA0210_TR_PCB_LTE B14 r1Test Report2022-01-25PDF 823.4 KB
LHJ-FE4NA0210_TR_PCB_LTE r1Test Report2022-01-25PDF 764 KB
LHJ-FE4NA0210_TR_PCB_WCDMA r1Test Report2022-01-25PDF 630.9 KB
TR CXXTest Report2021-06-02PDF 254.8 KB
TR JBPTest Report2021-06-02PDF 514.8 KB
Tsup JBPTest Report2021-06-02PDF 254.8 KB
TestRpt_JBP, CXXTest Report2021-05-21PDF 359.6 KB
TestRpt_PCB_LTETest Report2021-05-21PDF 529.8 KB
TestRpt_PCB_LTE B14Test Report2021-05-21PDF 705.5 KB
TestRpt_PCB_WCDMATest Report2021-05-21PDF 554.5 KB
LHJ-FE4NA0210_Attestation Covered List_20230619Attestation Statements2023-07-03PDF 133 KB
LHJ-FE4NA0210_cvrltr_US AgentAttestation Statements2023-07-03PDF 183.3 KB
LHJ-FE4NA0210_cvrltr_US AgentAttestation Statements2023-07-03PDF 150.3 KB
LHJ_attestation_US Agent_r1Attestation Statements2023-07-03PDF 202.3 KB
Certification designating a U.S. agentAttestation Statements2023-06-06PDF 183.3 KB
LHJ-FE4NA0210_Attestation Covered List_20230529Attestation Statements2023-06-06PDF 131.3 KB
LHJ-FE4NA0210_Attestation Covered ListAttestation Statements2023-05-05PDF 108.6 KB
LHJ-FE4NA0210_cvrltr_Certification designating a U.S. agentAttestation Statements2023-05-05PDF 183.3 KB
LHJ-FE4NA0210_cvrltr_Certification Concerning Covered EquipmentAttestation Statements2023-03-16PDF 174.1 KB
LHJ_cvrltr_Certification designating a U.S. agentAttestation Statements2023-03-16PDF 185.3 KB
LHJ-FE4NA0210_cvrltr_FCC POAAttestation Statements2022-02-17PDF 122.8 KB
LHJ-FE4NA0210_cvrltr_FCC POAAttestation Statements2022-01-25PDF 130 KB
LHJ-FE4NA0210_cvrltr_FCC Class II Permissive Change_20230619Cover Letter(s)2023-07-03PDF 170 KB
LHJ-FE4NA0210_cvrltr_FCC Confidentiality Request_20230619Cover Letter(s)2023-07-03PDF 147 KB
LHJ-FE4NA0210_cvrltr_FCC POA_20230619Cover Letter(s)2023-07-03PDF 150.3 KB
LHJ-FE4NA0210_cvrltr_FCC Class II Permissive Change_20230529Cover Letter(s)2023-06-06PDF 162.8 KB
LHJ-FE4NA0210_cvrltr_FCC Confidentiality Request_20230529Cover Letter(s)2023-06-06PDF 146.5 KB
LHJ-FE4NA0210_cvrltr_FCC Class II Permissive ChangeCover Letter(s)2023-05-05PDF 137.5 KB
LHJ-FE4NA0210_cvrltr_FCC Confidentiality RequestCover Letter(s)2023-05-05PDF 151.7 KB
LHJ-FE4NA0210_cvrltr_FCC POACover Letter(s)2023-05-05PDF 125.5 KB
LHJ-FE4NA0210_cvrltr_FCC Class II Permissive ChangeCover Letter(s)2023-03-16PDF 139.4 KB
LHJ-FE4NA0210_cvrltr_FCC Confidentiality RequestCover Letter(s)2023-03-16PDF 119.9 KB
LHJ-FE4NA0210_cvrltr_FCC POACover Letter(s)2023-03-16PDF 122.1 KB
LHJ-FE4NA0210_cvrltr_FCC Class II Permissive Change_r1Cover Letter(s)2022-08-16PDF 142.8 KB
LHJ-FE4NA0210_cvrltr_FCC Confidentiality Request_r1Cover Letter(s)2022-08-16PDF 118.7 KB
LHJ-FE4NA0210_cvrltr_FCC POACover Letter(s)2022-08-16PDF 121.4 KB
LHJ-FE4NA0210_cvrltr_FCC Class II Permissive ChangeCover Letter(s)2022-02-17PDF 141.5 KB
LHJ-FE4NA0210_cvrltr_FCC Confidentiality RequestCover Letter(s)2022-02-17PDF 120.6 KB
LHJ-FE4NA0210_cvrltr_FCC Confidentiality Request r1Cover Letter(s)2022-02-17PDF 126.8 KB
LHJ-FE4NA0210_cvrltr_FCC Class II Permissive ChangeCover Letter(s)2022-01-25PDF 200.5 KB
LHJ-FE4NA0210_cvrltr_FCC Confidentiality RequestCover Letter(s)2022-01-25PDF 124.5 KB
C2PC Cover LetterCover Letter(s)2021-06-02PDF 141.2 KB
Confidentiality LetterCover Letter(s)2021-06-02PDF 120.8 KB
POA LetterCover Letter(s)2021-06-02PDF 123 KB
Class II Permissive ChangeCover Letter(s)2021-05-21PDF 142.3 KB
Confidentiality RequestCover Letter(s)2021-05-21PDF 120.8 KB
POACover Letter(s)2021-05-21PDF 123 KB
LHJ-FE4NA0210_FCC SAR_Appendix ARF Exposure Info2023-07-03PDF 836.9 KB
LHJ-FE4NA0210_FCC SAR_Appendix BRF Exposure Info2023-07-03PDF 934.2 KB
LHJ-FE4NA0210_FCC SAR_Appendix C_1RF Exposure Info2023-07-03PDF 4.9 MB
LHJ-FE4NA0210_FCC SAR_Appendix C_2RF Exposure Info2023-07-03PDF 1.6 MB
LHJ-FE4NA0210_FCC SAR_r1RF Exposure Info2023-07-03PDF 1.3 MB
FA260854-02_R01_FCC SARRF Exposure Info2023-06-06PDF 1.2 MB
FA260854-02_R01_FCC SAR_Appendix ARF Exposure Info2023-06-06PDF 423.2 KB
FA260854-02_R01_FCC SAR_Appendix BRF Exposure Info2023-06-06PDF 917.6 KB
FA260854-02_R01_FCC SAR_Appendix CRF Exposure Info2023-06-06PDF 5.1 MB
FA260854-02_R01_FCC SAR_r1RF Exposure Info2023-06-06PDF 1.5 MB
FA260854-02_R01_FCC SAR_r2RF Exposure Info2023-06-06PDF 1.2 MB
LHJ-FE4NA0210_FCC MPERF Exposure Info2023-03-16PDF 265 KB
LHJ-FE4NA0210_FCC SARRF Exposure Info2023-03-16PDF 882.3 KB
LHJ-FE4NA0210_FCC SAR_Appendix ARF Exposure Info2023-03-16PDF 114.5 KB
LHJ-FE4NA0210_FCC SAR_Appendix BRF Exposure Info2023-03-16PDF 84.9 KB
LHJ-FE4NA0210_FCC SAR_Appendix CRF Exposure Info2023-03-16PDF 3.4 MB
LHJ-FE4NA0210_FCC MPE_r1RF Exposure Info2022-08-16PDF 254 KB
LHJ-FE4NA0210_FCC SARRF Exposure Info2022-08-16PDF 1.6 MB
LHJ-FE4NA0210_FCC SAR_ARF Exposure Info2022-08-16PDF 806.8 KB
LHJ-FE4NA0210_FCC SAR_BRF Exposure Info2022-08-16PDF 1.4 MB
LHJ-FE4NA0210_FCC SAR_CRF Exposure Info2022-08-16PDF 4.9 MB
LHJ-FE4NA0210_MPE r1RF Exposure Info2022-02-17PDF 425.2 KB
LHJ-FE4NA0210_FCC MPE r1RF Exposure Info2022-01-25PDF 428 KB

Application Information

Application IDrbDzNGreoQ3JkTyx3mQIpw==
Final Action Date2023-07-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015232887
ModelFE4NA0210
Equipment ClassJBP - Part 15 Class B Computing Device Peripheral
Device DescriptionFE4NA0210
Responsible PartyJames Zhang, Jianming.1.zhang@continental-corporation.com , 8478622435
AgentIrene Irene Irene, Sporton International Inc., irenechung@Sporton.com.tw , +88633273456
Test FirmAlex Chen, SPORTON International Inc., alex@sporton.com.tw , +886-3-327-3456
TCB EmailKevinlu@sporton-usa.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/31/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination. Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1). Class II Permissive Change: Add the new antenna model for use as described in this filing. Class II Permissive Change: Add the new antenna model Molex 84835853 (85660744) and evaluate portable RF exposure condition on the Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1) as described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 25 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.

Applications

Application IDDatePurpose
rbDzNGreoQ3JkTyx3mQIpw==2023-07-03Class II permissive change or modification of presently authorized equipment
insBBiZNoTSGSNVgc6oyLg==2023-07-03Class II permissive change or modification of presently authorized equipment
edkTyXUdwHyhnG1uTGUJKQ==2023-07-03Class II permissive change or modification of presently authorized equipment
xeB6Xw01Pl3rqlLHoHDvyQ==2023-06-06Class II permissive change or modification of presently authorized equipment
BCc3hnuUizcDl4wga47j3g==2023-05-05Class II permissive change or modification of presently authorized equipment
mbaYQHjQRWbH+BGeM+srnA==2023-03-16Class II permissive change or modification of presently authorized equipment
ZtKY5FkxH7Dszs1LWSCiCg==2023-03-16Class II permissive change or modification of presently authorized equipment
FpGHlu1uf+IVI619OPjh5A==2023-03-16Class II permissive change or modification of presently authorized equipment
s9BaNwu2JO+g9Uj4Rtr6ag==2022-08-16Class II permissive change or modification of presently authorized equipment
R/3dKcmLMAZVk6FWfFspEA==2022-08-16Class II permissive change or modification of presently authorized equipment
5CIbBFG86rAHUJTSVLjyjQ==2022-08-16Class II permissive change or modification of presently authorized equipment
mxh3Xuj4gIOTB66MmBDesw==2022-02-17Class II permissive change or modification of presently authorized equipment
c9wvEUCYDTWvTgwjM2J/xg==2022-02-17Class II permissive change or modification of presently authorized equipment
Y0aUs7N3kU2Dag7uPw6WLg==2022-02-17Class II permissive change or modification of presently authorized equipment
mNaq1JQu23X6NISRr/HjUA==2022-01-25Class II permissive change or modification of presently authorized equipment
L945vs6yX7/kvGN/2GyKaw==2022-01-25Class II permissive change or modification of presently authorized equipment
90NmA8o7XlDDalUBQTR/iQ==2022-01-25Class II permissive change or modification of presently authorized equipment
K05/bf1bYpFtBOMbG/c2fA==2021-06-02Class II permissive change or modification of presently authorized equipment
BJ0R/p1dPgJ4OsoIB8SSqg==2021-06-02Class II permissive change or modification of presently authorized equipment
xJe2YI4S7wIffasUYXLZLA==2021-05-21Class II permissive change or modification of presently authorized equipment
PRSNFLekZdfjiXQjhcsYNw==2021-05-21Class II permissive change or modification of presently authorized equipment
3ZM+mAM4VsjOYg6BwLCWsQ==2021-05-21Class II permissive change or modification of presently authorized equipment
ySud5llk9fZY++RhF89pKQ==2020-07-31Original Equipment
aYd9XJFHM3jjrIPYHLzlEQ==2020-07-31Original Equipment
XhcNKVAoyD4neCCwbx6h5g==2020-07-31Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
704-711 MHz0.21132.5ppm9M07G7D27
704-711 MHz0.1772.5ppm9M09W7D27
729-768 MHz15B
782 MHz0.18842.5ppm9M01G7D27
782 MHz0.15892.5ppm8M99W7D27
793 MHz0.16872.5ppm9M03G7D9
793 MHz0.16872.5ppm9M03G7D27
793 MHz0.14262.5ppm9M07W7D9
793 MHz0.14262.5ppm9M07W7D27
829-844 MHz0.19912.5ppm9M03G7D22H
829-844 MHz0.16832.5ppm9M05W7D22H
829-844 MHz0.16832.5ppm9M03G7D22H
869-894 MHz15B
1712.4-1752.6 MHz0.18452.5ppm4M16F9W27
1720-1770 MHz0.1952.5ppm17M9G7D27

Grants

TCB Grant - Application ZtKY5FkxH7Dszs1LWSCiCg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 03/16/2023

Application Dated: 03/10/2023
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0110
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The internal antenna (Model: INTANT01) of this device has been tested for SAR measurement to demonstrate the compliance of portable RF exposure condition. The external antennas (Model: 4G Hexband NA) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change: Evaluates new external antennas (Model: 85556753 and Model: 85660742) for the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The external antennas (Model: 85556753 and Model: 85660742) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for use at the body transmission exposure conditions are < 0.10 W/kg.


EAS Grant - Application ZtKY5FkxH7Dszs1LWSCiCg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 03/16/2023

Application Dated: 03/10/2023
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0110
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The internal antenna (Model: INTANT01) of this device has been tested for SAR measurement to demonstrate the compliance of portable RF exposure condition. The external antennas (Model: 4G Hexband NA) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change: Evaluates new external antennas (Model: 85556753 and Model: 85660742) for the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The external antennas (Model: 85556753 and Model: 85660742) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for use at the body transmission exposure conditions are < 0.10 W/kg.



TCB Grant - Application ySud5llk9fZY++RhF89pKQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/31/2020

Application Dated: 07/30/2020
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
27 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
27 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module’s antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14.

EAS Grant - Application ySud5llk9fZY++RhF89pKQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 07/31/2020

Application Dated: 07/30/2020
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
27 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
27 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module’s antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14.



TCB Grant - Application Y0aUs7N3kU2Dag7uPw6WLg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/17/2022

Application Dated: 02/17/2022
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: FE4NA0210
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1).

Class II Permissive Change: Add the new antenna model for use as described in this filing.


EAS Grant - Application Y0aUs7N3kU2Dag7uPw6WLg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 02/17/2022

Application Dated: 02/17/2022
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: FE4NA0210
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1).

Class II Permissive Change: Add the new antenna model for use as described in this filing.



TCB Grant - Application xJe2YI4S7wIffasUYXLZLA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/21/2021

Application Dated: 05/19/2021
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

EAS Grant - Application xJe2YI4S7wIffasUYXLZLA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 05/21/2021

Application Dated: 05/19/2021
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.



TCB Grant - Application XhcNKVAoyD4neCCwbx6h5g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/31/2020

Application Dated: 07/30/2020
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0


EAS Grant - Application XhcNKVAoyD4neCCwbx6h5g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 07/31/2020

Application Dated: 07/30/2020
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0



TCB Grant - Application xeB6Xw01Pl3rqlLHoHDvyQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/06/2023

Application Dated: 06/04/2023
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0110
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The internal antenna (Model: INTANT01) of this device has been tested for SAR measurement to demonstrate the compliance of portable RF exposure condition. The external antennas (Model: 4G Hexband NA) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change: Evaluates new external antennas (Model: 85556753 and Model: 85660742) for the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The external antennas (Model: 85556753 and Model: 85660742) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for use at the body transmission exposure conditions are < 0.10 W/kg.

Class II Permissive Change: An additional SAR test was performed on antenna (Model: 85660742) at 2.5 cm separation distance. The highest reported SAR for use at the body transmission exposure condition is < 0.10 W/kg.


EAS Grant - Application xeB6Xw01Pl3rqlLHoHDvyQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 06/06/2023

Application Dated: 06/04/2023
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0110
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The internal antenna (Model: INTANT01) of this device has been tested for SAR measurement to demonstrate the compliance of portable RF exposure condition. The external antennas (Model: 4G Hexband NA) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change: Evaluates new external antennas (Model: 85556753 and Model: 85660742) for the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The external antennas (Model: 85556753 and Model: 85660742) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for use at the body transmission exposure conditions are < 0.10 W/kg.

Class II Permissive Change: An additional SAR test was performed on antenna (Model: 85660742) at 2.5 cm separation distance. The highest reported SAR for use at the body transmission exposure condition is < 0.10 W/kg.



TCB Grant - Application s9BaNwu2JO+g9Uj4Rtr6ag==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 08/16/2022

Application Dated: 08/15/2022
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0110
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M03G7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The external antennas (Model: 4G Hexband NA) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for use at the body transmission exposure conditions are <0.10 W/kg.


EAS Grant - Application s9BaNwu2JO+g9Uj4Rtr6ag==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 08/16/2022

Application Dated: 08/15/2022
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0110
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M03G7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The external antennas (Model: 4G Hexband NA) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for use at the body transmission exposure conditions are <0.10 W/kg.



TCB Grant - Application rbDzNGreoQ3JkTyx3mQIpw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 07/03/2023

Application Dated: 06/30/2023
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1).

Class II Permissive Change: Add the new antenna model for use as described in this filing.

Class II Permissive Change: Add the new antenna model Molex 84835853 (85660744) and evaluate portable RF exposure condition on the Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1) as described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 25 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.


EAS Grant - Application rbDzNGreoQ3JkTyx3mQIpw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 07/03/2023

Application Dated: 06/30/2023
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1).

Class II Permissive Change: Add the new antenna model for use as described in this filing.

Class II Permissive Change: Add the new antenna model Molex 84835853 (85660744) and evaluate portable RF exposure condition on the Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1) as described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 25 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.



TCB Grant - Application R/3dKcmLMAZVk6FWfFspEA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 08/16/2022

Application Dated: 08/15/2022
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0110
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0

C2PC: Depopulated passive components from the RF front-end of the L2/L5 GNSS band.

Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1.


EAS Grant - Application R/3dKcmLMAZVk6FWfFspEA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 08/16/2022

Application Dated: 08/15/2022
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0110
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0

C2PC: Depopulated passive components from the RF front-end of the L2/L5 GNSS band.

Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1.



TCB Grant - Application PRSNFLekZdfjiXQjhcsYNw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/21/2021

Application Dated: 05/19/2021
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

EAS Grant - Application PRSNFLekZdfjiXQjhcsYNw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 05/21/2021

Application Dated: 05/19/2021
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.



TCB Grant - Application mxh3Xuj4gIOTB66MmBDesw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/17/2022

Application Dated: 02/17/2022
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0210
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons.

Class II Permissive Change: Add the new antenna model for use in mobile RF exposure category configuration as described in this filing.


EAS Grant - Application mxh3Xuj4gIOTB66MmBDesw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 02/17/2022

Application Dated: 02/17/2022
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0210
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons.

Class II Permissive Change: Add the new antenna model for use in mobile RF exposure category configuration as described in this filing.



TCB Grant - Application mNaq1JQu23X6NISRr/HjUA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 01/25/2022

Application Dated: 01/21/2022
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0210
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons.


EAS Grant - Application mNaq1JQu23X6NISRr/HjUA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 01/25/2022

Application Dated: 01/21/2022
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0210
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons.



TCB Grant - Application mbaYQHjQRWbH+BGeM+srnA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 03/16/2023

Application Dated: 03/10/2023
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0110
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0

C2PC: Depopulated passive components from the RF front-end of the L2/L5 GNSS band.

Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1.

Class II Permissive Change: Evaluates new external antennas (Model: 85556753 and Model: 85660742) for the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1.


EAS Grant - Application mbaYQHjQRWbH+BGeM+srnA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 03/16/2023

Application Dated: 03/10/2023
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0110
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0

C2PC: Depopulated passive components from the RF front-end of the L2/L5 GNSS band.

Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1.

Class II Permissive Change: Evaluates new external antennas (Model: 85556753 and Model: 85660742) for the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1.



TCB Grant - Application L945vs6yX7/kvGN/2GyKaw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 01/25/2022

Application Dated: 01/20/2022
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0210
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1).


EAS Grant - Application L945vs6yX7/kvGN/2GyKaw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 01/25/2022

Application Dated: 01/20/2022
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0210
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1).



TCB Grant - Application K05/bf1bYpFtBOMbG/c2fA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 06/02/2021

Application Dated: 05/26/2021
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: FE4NA0110
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

C2PC: Depopulated passive components from the RF front-end of the L2/L5 GNSS band.

EAS Grant - Application K05/bf1bYpFtBOMbG/c2fA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 06/02/2021

Application Dated: 05/26/2021
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: FE4NA0110
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

C2PC: Depopulated passive components from the RF front-end of the L2/L5 GNSS band.



TCB Grant - Application insBBiZNoTSGSNVgc6oyLg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 07/03/2023

Application Dated: 06/30/2023
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1).

Class II Permissive Change: Add the new antenna model for use as described in this filing.

Class II Permissive Change: Add the new antenna model Molex 84835853 (85660744) and evaluate portable RF exposure condition on the Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1) as described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 25 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.


EAS Grant - Application insBBiZNoTSGSNVgc6oyLg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 07/03/2023

Application Dated: 06/30/2023
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1).

Class II Permissive Change: Add the new antenna model for use as described in this filing.

Class II Permissive Change: Add the new antenna model Molex 84835853 (85660744) and evaluate portable RF exposure condition on the Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1) as described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 25 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.



TCB Grant - Application FpGHlu1uf+IVI619OPjh5A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 03/16/2023

Application Dated: 03/10/2023
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: FE4NA0110
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

C2PC: Depopulated passive components from the RF front-end of the L2/L5 GNSS band.

Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1.

Class II Permissive Change: Evaluates new external antennas (Model: 85556753 and Model: 85660742) for the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1.


EAS Grant - Application FpGHlu1uf+IVI619OPjh5A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 03/16/2023

Application Dated: 03/10/2023
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: FE4NA0110
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

C2PC: Depopulated passive components from the RF front-end of the L2/L5 GNSS band.

Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1.

Class II Permissive Change: Evaluates new external antennas (Model: 85556753 and Model: 85660742) for the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1.



TCB Grant - Application edkTyXUdwHyhnG1uTGUJKQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 07/03/2023

Application Dated: 06/30/2023
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14.

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons.

Class II Permissive Change: Add the new antenna model for use in mobile RF exposure category configuration as described in this filing.

Class II Permissive Change: Add the new antenna model Molex 84835853 (85660744) and evaluate portable RF exposure condition on the Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1) as described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 25 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported Body SAR is 0.74 W/kg.


EAS Grant - Application edkTyXUdwHyhnG1uTGUJKQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 07/03/2023

Application Dated: 06/30/2023
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FE4NA0210
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1977 2.5  PM 4M15F9W
24E 1852.4  -  1907.6 0.1875 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.1845 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.1884 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.1607 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.1786 2.5  PM 17M9G7D
27 1720.0  -  1745.0 0.1528 2.5  PM 18M0W7D
22H 829.0  -  844.0 0.1991 2.5  PM 9M03G7D
22H 829.0  -  844.0 0.1683 2.5  PM 9M05W7D
27 704.0  -  711.0 0.2113 2.5  PM 9M07G7D
27 704.0  -  711.0 0.177 2.5  PM 9M09W7D
27 782.0  -  782.0 0.1884 2.5  PM 9M01G7D
27 782.0  -  782.0 0.1589 2.5  PM 8M99W7D
90 793.0  -  793.0 0.1687 2.5  PM 9M03G7D
90 793.0  -  793.0 0.1426 2.5  PM 9M07W7D
27 1720.0  -  1770.0 0.195 2.5  PM 17M9G7D
27 1720.0  -  1770.0 0.1656 2.5  PM 18M0W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14.

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons.

Class II Permissive Change: Add the new antenna model for use in mobile RF exposure category configuration as described in this filing.

Class II Permissive Change: Add the new antenna model Molex 84835853 (85660744) and evaluate portable RF exposure condition on the Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1) as described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 25 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported Body SAR is 0.74 W/kg.



TCB Grant - Application c9wvEUCYDTWvTgwjM2J/xg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/17/2022

Application Dated: 02/17/2022
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0210
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1).

Class II Permissive Change: Add the new antenna model for use as described in this filing.


EAS Grant - Application c9wvEUCYDTWvTgwjM2J/xg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 02/17/2022

Application Dated: 02/17/2022
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0210
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0

C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination.

Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1).

Class II Permissive Change: Add the new antenna model for use as described in this filing.



TCB Grant - Application BJ0R/p1dPgJ4OsoIB8SSqg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 06/02/2021

Application Dated: 05/26/2021
Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0110
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0

C2PC: Depopulated passive components from the RF front-end of the L2/L5 GNSS band.

EAS Grant - Application BJ0R/p1dPgJ4OsoIB8SSqg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Continental Automotive Systems, Inc.
21440 West Lake Cook Road
Deer Park, IL 60010
United States
  Date of Grant: 06/02/2021

Application Dated: 05/26/2021
 
Attention: James Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHJ-FE4NA0210
Name of Grantee:  Continental Automotive Systems, Inc.
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: FE4NA0110
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 869.0  -  894.0
15B 729.0  -  768.0

C2PC: Depopulated passive components from the RF front-end of the L2/L5 GNSS band.



Mail To: