FCC ID LHL-215-1960

802.11 b/g + Bluetooth Module

by MaxVision LLC

Grantee Code: LHL   Product Code: 2151960
Latest application date: 2010-12-29

FCC ID Device Details

FCC IDLHL-215-1960
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLHL
Product Code2151960
Applicant BusinessMaxVision LLC 🇺🇸
Related Domains maxvision.com
Equipment Class802.11 b/g + Bluetooth Module
Test FirmAdvanced Compliance Solutions, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2010-12-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2010-12-29
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: U9R-W2CBW003 Grant Date: 06/02/20072010-12-09
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: U9R-W2CBW003 Grant Date: 06/02/20072010-12-09

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2010-12-29PDF 435.5 KB
External PhotosExternal Photos2010-12-29PDF 422.5 KB
External PhotosExternal Photos2010-12-09PDF 179 KB
Label InformationID Label/Location Info2010-12-09PDF 122.4 KB
Test Setup PhotosTest Setup Photos2010-12-29PDF 313.5 KB
Test ReportTest Report2010-12-29PDF 812.2 KB
Agency AgreementCover Letter(s)2010-12-29PDF 393.6 KB
FCC Cover LetterCover Letter(s)2010-12-29PDF 17.2 KB
Change in ID RequestCover Letter(s)2010-12-09PDF 108.4 KB
RF ExposureRF Exposure Info2010-12-29PDF 33.6 KB

Application Information

Application IDnxtPmOksEZ6a99LaTZrSCw==
Final Action Date2010-12-29
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0020220471
Model-215-1960
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11 b/g + Bluetooth Module
Responsible PartyRalcy Velazco, Ralcy@MaxVision.com , 256-542-1335
AgentSam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com , 770 831 8048
Test FirmRandy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048
TCB Emailjwoods@acstestlab.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Change to add new antenna type in a specific host as described in this filing.

Applications

Application IDDatePurpose
nxtPmOksEZ6a99LaTZrSCw==2010-12-29Class II permissive change or modification of presently authorized equipment
buBaRI/zyphwQ2Iyvoif5g==2010-12-29Class II permissive change or modification of presently authorized equipment
z+vz/PGj6GOeGIiOYgjpnQ==2010-12-09Change in identification of presently authorized equipment. Original FCC ID: U9R-W2CBW003 Grant Date: 06/02/2007
I6+U160vIeMCg7n5R1PH3Q==2010-12-09Change in identification of presently authorized equipment. Original FCC ID: U9R-W2CBW003 Grant Date: 06/02/2007

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.003360015CCC
2412-2462 MHz0.0334215CCC
2412-2462 MHz0.00192815C
2412-2462 MHz0.00192815CCC

Grants

TCB Grant - Application z+vz/PGj6GOeGIiOYgjpnQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
Date of Grant: 12/09/2010

Application Dated: 12/09/2010
MaxVision LLC
495 Production Avenue
Madison, AL 35758
 
Attention: Ralcy Velazco

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHL-215-1960
Name of Grantee:  MaxVision LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11 b/g + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00336  

Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application z+vz/PGj6GOeGIiOYgjpnQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MaxVision LLC
495 Production Avenue
Madison, AL 35758
United States
  Date of Grant: 12/09/2010

Application Dated: 12/09/2010
 
Attention: Ralcy Velazco

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHL-215-1960
Name of Grantee:  MaxVision LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11 b/g + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00336  

Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application nxtPmOksEZ6a99LaTZrSCw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
Date of Grant: 12/29/2010

Application Dated: 12/29/2010
MaxVision LLC
495 Production Avenue
Madison, AL 35758
 
Attention: Ralcy Velazco

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHL-215-1960
Name of Grantee:  MaxVision LLC
Equipment Class: Digital Transmission System
Notes: 802.11 b/g + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.03342  
CC 15C 2412.0  -  2462.0 0.001928  

Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

Class II Change to add new antenna type in a specific host as described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application nxtPmOksEZ6a99LaTZrSCw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MaxVision LLC
495 Production Avenue
Madison, AL 35758
United States
  Date of Grant: 12/29/2010

Application Dated: 12/29/2010
 
Attention: Ralcy Velazco

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHL-215-1960
Name of Grantee:  MaxVision LLC
Equipment Class: Digital Transmission System
Notes: 802.11 b/g + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.03342  
CC 15C 2412.0  -  2462.0 0.001928  

Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

Class II Change to add new antenna type in a specific host as described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application I6+U160vIeMCg7n5R1PH3Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
Date of Grant: 12/09/2010

Application Dated: 12/09/2010
MaxVision LLC
495 Production Avenue
Madison, AL 35758
 
Attention: Ralcy Velazco

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHL-215-1960
Name of Grantee:  MaxVision LLC
Equipment Class: Digital Transmission System
Notes: 802.11 b/g + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.03342  
15C 2412.0  -  2462.0 0.001928  

Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application I6+U160vIeMCg7n5R1PH3Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MaxVision LLC
495 Production Avenue
Madison, AL 35758
United States
  Date of Grant: 12/09/2010

Application Dated: 12/09/2010
 
Attention: Ralcy Velazco

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHL-215-1960
Name of Grantee:  MaxVision LLC
Equipment Class: Digital Transmission System
Notes: 802.11 b/g + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.03342  
15C 2412.0  -  2462.0 0.001928  

Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application buBaRI/zyphwQ2Iyvoif5g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
Date of Grant: 12/29/2010

Application Dated: 12/29/2010
MaxVision LLC
495 Production Avenue
Madison, AL 35758
 
Attention: Ralcy Velazco

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHL-215-1960
Name of Grantee:  MaxVision LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11 b/g + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00336  

Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

Class II Change adds new antenna type in a specific host as described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application buBaRI/zyphwQ2Iyvoif5g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MaxVision LLC
495 Production Avenue
Madison, AL 35758
United States
  Date of Grant: 12/29/2010

Application Dated: 12/29/2010
 
Attention: Ralcy Velazco

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LHL-215-1960
Name of Grantee:  MaxVision LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11 b/g + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00336  

Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

Class II Change adds new antenna type in a specific host as described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: