FCC ID LLB9975T

Aclara Synergize RF Network DCU XCVR

by Aclara Technologies LLC

Grantee Code: LLB   Product Code: 9975T
Latest application date: 2021-10-06

Device Images

FCC ID Device Details

FCC IDLLB9975T
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLLB
Product Code9975T
Applicant BusinessAclara Technologies LLC 🇺🇸
Related Domains aclara.com
Equipment ClassAclara Synergize RF Network DCU XCVR
Test FirmRadiometrics Midwest Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
450-470 MHzClass II permissive change or modification of presently authorized equipment2021-10-06
450-470 MHzClass II permissive change or modification of presently authorized equipment2016-08-26
450-470 MHzOriginal Equipment2016-01-15

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-10-06PDF 2.9 MB
Label InstructionUsers Manual2016-01-15PDF 1.2 MB
Users ManualUsers Manual2016-01-15PDF 1.9 MB
Int PhotosInternal Photos2016-01-15PDF 1 MB
Ext PhotosExternal Photos2016-01-15PDF 1 MB
FCC ID LabelID Label/Location Info2016-01-15PDF 215 KB
Setup PhotosTest Setup Photos2016-01-15PDF 339.8 KB
Test ReportTest Report2016-08-26PDF 268.9 KB
Test ReportTest Report2016-01-15PDF 335.2 KB
C2PC LetterCover Letter(s)2021-10-06PDF 64.5 KB
LOA LetterCover Letter(s)2021-10-06PDF 65.9 KB
Agency LetterCover Letter(s)2016-08-26PDF 320.9 KB
C2PC LetterCover Letter(s)2016-08-26PDF 69.6 KB
Confidentiality LetterCover Letter(s)2016-08-26PDF 27.2 KB
POACover Letter(s)2016-08-26PDF 300.1 KB
Agency LetterCover Letter(s)2016-01-15PDF 63.2 KB
Frequency Justifiction LetterCover Letter(s)2016-01-15PDF 442 KB
Module Approval LetterCover Letter(s)2016-01-15PDF 31.8 KB
POACover Letter(s)2016-01-15PDF 110.1 KB
RF ExposureRF Exposure Info2021-10-06PDF 51.2 KB
RF ExposureRF Exposure Info2016-01-15PDF 15.6 KB
Tune up ProcedureParts List/Tune Up Info2016-01-15PDF 7.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 88.8 KB
Schematics Metadata onlySchematicsPDF 127.7 KB
Operation Description Metadata onlyOperational DescriptionPDF 7.9 KB
PAG Approved Metadata onlyOperational DescriptionPDF 41.2 KB
Spectral Effeciency Anaysis Metadata onlyOperational DescriptionPDF 141.2 KB
Spectral Effeciency Statement Metadata onlyOperational DescriptionPDF 50 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 70.9 KB

Application Information

Application IDFrrGAavLgCfAL3bs5BEt7w==
Final Action Date2021-10-06
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004168324
Model9975T
Frequency Range450-470 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionAclara Synergize RF Network DCU XCVR
Responsible PartyJohn Cunningham, VP, Chief Engineer, jcunningham@aclara.com , 314-895-8012
Test FirmJoseph Strzelecki, Radiometrics Midwest Corp., joe@radiomet.com , 8152930772
TCB Emailtei@timcoengr.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC: change the duty cycle from 2.8% to 10 %; and increase the maximum Antenna gain from 5 to 7.15 dBi. Output power listed is conducted. Modular Approval for use as a module in mobile-only exposure conditions. This device must be professionally installed only for OEM integration into host products. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
FrrGAavLgCfAL3bs5BEt7w==2021-10-06Class II permissive change or modification of presently authorized equipment
WBY5SXXH5beCtWa/1AnG3w==2016-08-26Class II permissive change or modification of presently authorized equipment
VTeEeD29Lgo5Ka36M5II5w==2016-01-15Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
450-470 MHz1.99500000.5500000000ppm6K50F1D90EF, ES
450-470 MHz1.99500002.5000000000ppm6K50F1D90EF, ES
450-470 MHz1.9952.5ppm6K50F1D9EF
450-470 MHz1.9952.5ppm5K60F1D90.203(j)(8)EF, J8

Grants

TCB Grant - Application WBY5SXXH5beCtWa/1AnG3w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 08/26/2016

Application Dated: 08/11/2016
Aclara Technologies LLC
77 Westport Plaza Drive
Suite 500
St. Louis, MO 63146
 
Attention: John Cunningham , VP, Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LLB9975T
Name of Grantee:  Aclara Technologies LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Aclara Synergize RF Network DCU XCVR
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 450.0  -  470.0 1.995 2.5  PM 6K50F1D
EF J8 90.203(j)(8) 450.0  -  470.0 1.995 2.5  PM 5K60F1D

Output power listed is conducted. Modular Approval for use as a module in mobile-only exposure conditions. This device must be professionally installed only for OEM integration into host products. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change described in this filing.

EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
J8: This device as been authorized under 90.203(j)(8) with a data rate of less than 4800 bits per second per 6.25 kHz of channel bandwidth based on information submitted justifying why the slower data rate provides more spectral efficiency than the standard data rate.

EAS Grant - Application WBY5SXXH5beCtWa/1AnG3w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Aclara Technologies LLC
77 Westport Plaza Drive Suite 500
St. Louis, MO 63146
United States
  Date of Grant: 08/26/2016

Application Dated: 08/11/2016
 
Attention: John Cunningham , VP, Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LLB9975T
Name of Grantee:  Aclara Technologies LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Aclara Synergize RF Network DCU XCVR
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 450.0  -  470.0 1.995 2.5  PM 6K50F1D
EF J8 90.203(j)(8) 450.0  -  470.0 1.995 2.5  PM 5K60F1D

Output power listed is conducted. Modular Approval for use as a module in mobile-only exposure conditions. This device must be professionally installed only for OEM integration into host products. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change described in this filing.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
J8: This device as been authorized under 90.203(j)(8) with a data rate of less than 4800 bits per second per 6.25 kHz of channel bandwidth based on information submitted justifying why the slower data rate provides more spectral efficiency than the standard data rate.

TCB Grant - Application VTeEeD29Lgo5Ka36M5II5w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 01/15/2016

Application Dated: 01/15/2016
Aclara Technologies LLC
77 Westport Plaza Drive
Suite 500
St. Louis, MO 63146
 
Attention: John Cunningham , VP, Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LLB9975T
Name of Grantee:  Aclara Technologies LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Aclara Synergize RF Network DCU XCVR
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 90 450.0  -  470.0 1.995 2.5  PM 6K50F1D

Output power listed is conducted. Modular Approval for use as a module in mobile-only exposure conditions. This device must be professionally installed only for OEM integration into host products. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

EAS Grant - Application VTeEeD29Lgo5Ka36M5II5w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Aclara Technologies LLC
77 Westport Plaza Drive Suite 500
St. Louis, MO 63146
United States
  Date of Grant: 01/15/2016

Application Dated: 01/15/2016
 
Attention: John Cunningham , VP, Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LLB9975T
Name of Grantee:  Aclara Technologies LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Aclara Synergize RF Network DCU XCVR
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 90 450.0  -  470.0 1.995 2.5  PM 6K50F1D

Output power listed is conducted. Modular Approval for use as a module in mobile-only exposure conditions. This device must be professionally installed only for OEM integration into host products. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

TCB Grant - Application FrrGAavLgCfAL3bs5BEt7w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/06/2021

Application Dated: 10/06/2021
Aclara Technologies LLC
77 Westport Plaza Drive
Suite 500
St. Louis, MO 63146
 
Attention: John Cunningham , VP, Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LLB9975T
Name of Grantee:  Aclara Technologies LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Aclara Synergize RF Network DCU XCVR
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 90 450.0  -  470.0 1.995 0.55  PM 6K50F1D

C2PC: change the duty cycle from 2.8% to 10 %; and increase the maximum Antenna gain from 5 to 7.15 dBi. Output power listed is conducted. Modular Approval for use as a module in mobile-only exposure conditions. This device must be professionally installed only for OEM integration into host products. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

EAS Grant - Application FrrGAavLgCfAL3bs5BEt7w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Aclara Technologies LLC
77 Westport Plaza Drive Suite 500
St. Louis, MO 63146
United States
  Date of Grant: 10/06/2021

Application Dated: 10/06/2021
 
Attention: John Cunningham , VP, Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LLB9975T
Name of Grantee:  Aclara Technologies LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Aclara Synergize RF Network DCU XCVR
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 90 450.0  -  470.0 1.995 0.55  PM 6K50F1D

C2PC: change the duty cycle from 2.8% to 10 %; and increase the maximum Antenna gain from 5 to 7.15 dBi. Output power listed is conducted. Modular Approval for use as a module in mobile-only exposure conditions. This device must be professionally installed only for OEM integration into host products. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

Mail To: