FCC ID LNQ-WF710GF

Tri-band Wi-Fi 7 Mesh AP

by Actiontec Electronics Inc

Grantee Code: LNQ   Product Code: WF710GF
Latest application date: 2024-05-22

FCC ID Device Details

FCC IDLNQ-WF710GF
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLNQ
Product CodeWF710GF
Applicant BusinessActiontec Electronics Inc 🇺🇸
Related Domains actiontec.com mrt-cert.com
Equipment ClassTri-band Wi-Fi 7 Mesh AP
Test FirmMRT Technology (Suzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2024-05-22
5955-7095 MHzOriginal Equipment2024-05-22
5180-5240 MHzOriginal Equipment2024-05-22

Exhibits

DocumentTypeAvailableFile
WF-710GF_User manual_RevUsers Manual2024-05-22PDF 817.8 KB
2403RSU002-UE-Internal PhotographInternal Photos2024-05-22PDF 1.7 MB
2403RSU002-UE-External PhotographExternal Photos2024-05-22PDF 607.6 KB
WF-710GF_LabelID Label/Location Info2024-05-22PDF 253.6 KB
2403RSU002-UT-Test Setup PhotoTest Setup Photos2024-05-22PDF 862.9 KB
2403RSU002-U2-FCC DTS Test Report_Part1Test Report2024-05-22PDF 5.3 MB
2403RSU002-U2-FCC DTS Test Report_Part2Test Report2024-05-22PDF 5.3 MB
2403RSU002-U2-FCC DTS Test Report_Part3Test Report2024-05-22PDF 5.4 MB
2403RSU002-U2-FCC DTS Test Report_Part4Test Report2024-05-22PDF 5.4 MB
2403RSU002-U2-FCC DTS Test Report_Part5Test Report2024-05-22PDF 1.6 MB
2403RSU002-U3-FCC NII Test Report_Part1Test Report2024-05-22PDF 5.7 MB
2403RSU002-U3-FCC NII Test Report_Part2Test Report2024-05-22PDF 5.5 MB
2403RSU002-U3-FCC NII Test Report_Part3Test Report2024-05-22PDF 5.6 MB
2403RSU002-U3-FCC NII Test Report_Part4Test Report2024-05-22PDF 5.6 MB
2403RSU002-U3-FCC NII Test Report_Part5Test Report2024-05-22PDF 5.6 MB
2403RSU002-U4-FCC 6ID Test Report_Part10Test Report2024-05-22PDF 5.7 MB
2403RSU002-U4-FCC 6ID Test Report_Part11Test Report2024-05-22PDF 5.5 MB
2403RSU002-U4-FCC 6ID Test Report_Part12Test Report2024-05-22PDF 5.7 MB
2403RSU002-U4-FCC 6ID Test Report_Part13Test Report2024-05-22PDF 5.5 MB
2403RSU002-U4-FCC 6ID Test Report_Part14Test Report2024-05-22PDF 5.7 MB
2403RSU002-U4-FCC 6ID Test Report_Part15Test Report2024-05-22PDF 5.7 MB
2403RSU002-U4-FCC 6ID Test Report_Part16_RevTest Report2024-05-22PDF 5.5 MB
2403RSU002-U4-FCC 6ID Test Report_Part1_RevTest Report2024-05-22PDF 5.6 MB
2403RSU002-U4-FCC 6ID Test Report_Part2Test Report2024-05-22PDF 5.6 MB
2403RSU002-U4-FCC 6ID Test Report_Part3Test Report2024-05-22PDF 5.5 MB
2403RSU002-U4-FCC 6ID Test Report_Part4Test Report2024-05-22PDF 5.5 MB
2403RSU002-U4-FCC 6ID Test Report_Part5Test Report2024-05-22PDF 5.4 MB
2403RSU002-U4-FCC 6ID Test Report_Part6Test Report2024-05-22PDF 5.5 MB
2403RSU002-U4-FCC 6ID Test Report_Part7Test Report2024-05-22PDF 5.6 MB
2403RSU002-U4-FCC 6ID Test Report_Part8Test Report2024-05-22PDF 5.4 MB
2403RSU002-U4-FCC 6ID Test Report_Part9Test Report2024-05-22PDF 5.5 MB
2403RSU002-U5-FCC DTS Test Report-BLETest Report2024-05-22PDF 3.9 MB
WF-710GF_Antenna Report_Rev_2_Part1Test Report2024-05-22PDF 5.7 MB
WF-710GF_Antenna Report_Rev_Part2Test Report2024-05-22PDF 5.4 MB
ACB-FORM-FCC-Application-Letters-Covered-List-AttestationAttestation Statements2024-05-22PDF 223.1 KB
ACB-FORM-FCC-Application-Letters-U.S.-Agent-Letter-for-Service-of-ProcessAttestation Statements2024-05-22PDF 118.8 KB
WF-710GF-FCC 6ID letterAttestation Statements2024-05-22PDF 272.8 KB
WF-710GF-FCC Attestation LetterAttestation Statements2024-05-22PDF 205.8 KB
WF-710GF-FCC Confidentiality Request LetterCover Letter(s)2024-05-22PDF 237.9 KB
WF-710GF-FCC Declaration of AuthorizationCover Letter(s)2024-05-22PDF 208.2 KB
WF-710GF-FCC Declaration of ConformityCover Letter(s)2024-05-22PDF 225 KB
WF-710GF-Model Difference Declaration letterCover Letter(s)2024-05-22PDF 120.5 KB
2403RSU002-U7-FCC RF Exposure ReportRF Exposure Info2024-05-22PDF 403.4 KB
Confidential_WF-710GF_Block diagram Metadata onlyBlock DiagramPDF 453.5 KB
Confidential_WF-710GF_Schematic Metadata onlySchematicsPDF 982 KB
Confidential_WF-710GF_Operation Description_Rev Metadata onlyOperational DescriptionPDF 163.5 KB
WF-710GF-KDB442812 Cover Letter_Rev Metadata onlySDR Software/Security Info.PDF 653.8 KB
WF-710GF-SDR letter Metadata onlySDR Software/Security Info.PDF 219.5 KB
WF-710GF-Software Security Requirements Cover Letter_Rev Metadata onlySDR Software/Security Info.PDF 1,013.4 KB

Application Information

Application IDlYvw1Siha/1/YHCt8KgSpg==
Final Action Date2024-05-22
Application PurposeOriginal Equipment
Applicant FRN0005810783
ModelWF710GF
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionTri-band Wi-Fi 7 Mesh AP
Responsible PartyZhe Liu, Product Manager, Jet.liu@actiontec.com , 9093138262
AgentMarlin Marlin Marlin, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , 86-512-66308358
Technical ContactMarlin Chen, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , 86-512-66308358
Non-Technical ContactMarlin Chen, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , 86-512-66308358
Test FirmMr. Marlin Chen, MRT Technology (Suzhou) Co., Ltd., marlinchen@mrt-cert.com , +86-512-66308358
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput power listed is conducted. Device is an 802.11 b/g/n/ax/be device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 39 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains 5GHz and 6GHz WLAN transmitters.

Applications

Application IDDatePurpose
lYvw1Siha/1/YHCt8KgSpg==2024-05-22Original Equipment
VhdCJwX5ed+hOGjopsV2dg==2024-05-22Original Equipment
Fh7QGsh90NaXrmlIptudxw==2024-05-22Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.004415CCC
2412-2462 MHz0.376715CCC, MO
5180-5240 MHz0.439515ECC, MO
5250 MHz0.159615ECC, MO, ND
5260-5320 MHz0.223915ECC, MO, ND
5500-5720 MHz0.239315ECC, MO, ND
5745-5825 MHz0.438515ECC, MO
5955-7095 MHz0.955000015ECC, EP, MO

Grants

TCB Grant - Application VhdCJwX5ed+hOGjopsV2dg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 05/22/2024

Application Dated: 05/08/2024
Actiontec Electronics Inc
2445 Augustine Drive
Suite 501
Santa Clara, CA 95054
 
Attention: Zhe Liu , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQ-WF710GF
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: Tri-band Wi-Fi 7 Mesh AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7095.0 0.955  

Power Output listed is EIRP. This device is restricted to indoor use only. Device is an 802.11a/ax/be device in a 4x4 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 39 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes in 6 GHz WLAN transmitter and it also contains BLE, 2.4 GHz and 5 GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application VhdCJwX5ed+hOGjopsV2dg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Actiontec Electronics Inc
2445 Augustine Drive Suite 501
Santa Clara, CA 95054
United States
  Date of Grant: 05/22/2024

Application Dated: 05/08/2024
 
Attention: Zhe Liu , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQ-WF710GF
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: Tri-band Wi-Fi 7 Mesh AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7095.0 0.955  

Power Output listed is EIRP. This device is restricted to indoor use only. Device is an 802.11a/ax/be device in a 4x4 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 39 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes in 6 GHz WLAN transmitter and it also contains BLE, 2.4 GHz and 5 GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application lYvw1Siha/1/YHCt8KgSpg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 05/22/2024

Application Dated: 05/08/2024
Actiontec Electronics Inc
2445 Augustine Drive
Suite 501
Santa Clara, CA 95054
 
Attention: Zhe Liu , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQ-WF710GF
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Digital Transmission System
Notes: Tri-band Wi-Fi 7 Mesh AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0044  
CC MO 15C 2412.0  -  2462.0 0.3767  

Output power listed is conducted. Device is an 802.11 b/g/n/ax/be device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 39 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains 5GHz and 6GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application lYvw1Siha/1/YHCt8KgSpg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Actiontec Electronics Inc
2445 Augustine Drive Suite 501
Santa Clara, CA 95054
United States
  Date of Grant: 05/22/2024

Application Dated: 05/08/2024
 
Attention: Zhe Liu , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQ-WF710GF
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Digital Transmission System
Notes: Tri-band Wi-Fi 7 Mesh AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0044  
CC MO 15C 2412.0  -  2462.0 0.3767  

Output power listed is conducted. Device is an 802.11 b/g/n/ax/be device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 39 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains 5GHz and 6GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Fh7QGsh90NaXrmlIptudxw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 05/22/2024

Application Dated: 05/09/2024
Actiontec Electronics Inc
2445 Augustine Drive
Suite 501
Santa Clara, CA 95054
 
Attention: Zhe Liu , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQ-WF710GF
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Tri-band Wi-Fi 7 Mesh AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.4395  
CC MO ND 15E 5260.0  -  5320.0 0.2239  
CC MO ND 15E 5500.0  -  5720.0 0.2393  
CC MO 15E 5745.0  -  5825.0 0.4385  
CC MO ND 15E 5250.0  -  5250.0 0.1596  

Power Output listed is conducted. Device is an 802.11a/n/ac/ax/be device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 39 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains BLE, 2.4GHz and 6GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Fh7QGsh90NaXrmlIptudxw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Actiontec Electronics Inc
2445 Augustine Drive Suite 501
Santa Clara, CA 95054
United States
  Date of Grant: 05/22/2024

Application Dated: 05/09/2024
 
Attention: Zhe Liu , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQ-WF710GF
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Tri-band Wi-Fi 7 Mesh AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.4395  
CC MO ND 15E 5260.0  -  5320.0 0.2239  
CC MO ND 15E 5500.0  -  5720.0 0.2393  
CC MO 15E 5745.0  -  5825.0 0.4385  
CC MO ND 15E 5250.0  -  5250.0 0.1596  

Power Output listed is conducted. Device is an 802.11a/n/ac/ax/be device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 39 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains BLE, 2.4GHz and 6GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: