FCC ID LNQ-WF825

Tri-band Wi-Fi 7 Wireless AP

by Actiontec Electronics Inc

Grantee Code: LNQ   Product Code: WF825
Latest application date: 2024-03-25

FCC ID Device Details

FCC IDLNQ-WF825
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLNQ
Product CodeWF825
Applicant BusinessActiontec Electronics Inc 🇺🇸
Related Domains actiontec.com mrt-cert.com
Equipment ClassTri-band Wi-Fi 7 Wireless AP
Test FirmMRT Technology (Suzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5955-7095 MHzOriginal Equipment2024-03-25
2402-2480 MHzOriginal Equipment2024-03-25
5180-5240 MHzOriginal Equipment2024-03-25

Exhibits

DocumentTypeAvailableFile
WF-825_User GuideUsers Manual2024-03-25PDF 322.3 KB
2312RSU008-UE-Internal PhotoInternal Photos2024-03-25PDF 2.4 MB
2312RSU008-UE-External PhotoExternal Photos2024-03-25PDF 866.2 KB
WF-825_Label and Label LocationID Label/Location Info2024-03-25PDF 273 KB
2312RSU008-UT-Test Setup PhotoTest Setup Photos2024-03-25PDF 843 KB
2312RSU008-U1-FCC DTS Test Report-BLETest Report2024-03-25PDF 2.3 MB
2312RSU008-U2-FCC DTS Test Report-Wi-Fi_Part1Test Report2024-03-25PDF 5.2 MB
2312RSU008-U2-FCC DTS Test Report-Wi-Fi_Part2Test Report2024-03-25PDF 5.5 MB
2312RSU008-U2-FCC DTS Test Report-Wi-Fi_Part3Test Report2024-03-25PDF 5.5 MB
2312RSU008-U2-FCC DTS Test Report-Wi-Fi_Part4Test Report2024-03-25PDF 5.5 MB
2312RSU008-U2-FCC DTS Test Report-Wi-Fi_Part5Test Report2024-03-25PDF 4.8 MB
2312RSU008-U3-FCC NII Test Report_Part1Test Report2024-03-25PDF 5.2 MB
2312RSU008-U3-FCC NII Test Report_Part1 Metadata onlyTest Report2024-03-25PDF 4.1 MB
2312RSU008-U3-FCC NII Test Report_Part2Test Report2024-03-25PDF 5.2 MB
2312RSU008-U3-FCC NII Test Report_Part3 Metadata onlyTest Report2024-03-25PDF 2.1 MB
2312RSU008-U3-FCC NII Test Report_Part3Test Report2024-03-25PDF 5.5 MB
2312RSU008-U3-FCC NII Test Report_Part4Test Report2024-03-25PDF 5.3 MB
2312RSU008-U3-FCC NII Test Report_Part5Test Report2024-03-25PDF 5.3 MB
2312RSU008-U3-FCC NII Test Report_Part6Test Report2024-03-25PDF 5.1 MB
2312RSU008-U3-FCC NII Test Report_Part7Test Report2024-03-25PDF 5.5 MB
2312RSU008-U3-FCC NII Test Report_Part8Test Report2024-03-25PDF 5.5 MB
2312RSU008-U3-FCC NII Test Report_Part9Test Report2024-03-25PDF 4.3 MB
2312RSU008-U4-FCC DFS Test Report_Part1Test Report2024-03-25PDF 5.6 MB
2312RSU008-U4-FCC DFS Test Report_Part2Test Report2024-03-25PDF 3.2 MB
2312RSU008-U5-FCC 6ID Test Report_Part1Test Report2024-03-25PDF 5.5 MB
2312RSU008-U5-FCC 6ID Test Report_Part2Test Report2024-03-25PDF 5.3 MB
2312RSU008-U5-FCC 6ID Test Report_Part3Test Report2024-03-25PDF 5.5 MB
2312RSU008-U5-FCC 6ID Test Report_Part4Test Report2024-03-25PDF 5.4 MB
2312RSU008-U5-FCC 6ID Test Report_Part5Test Report2024-03-25PDF 5.1 MB
2312RSU008-U5-FCC 6ID Test Report_Part6Test Report2024-03-25PDF 5.1 MB
2312RSU008-U5-FCC 6ID Test Report_Part7Test Report2024-03-25PDF 5.5 MB
2312RSU008-U5-FCC 6ID Test Report_Part8Test Report2024-03-25PDF 3.5 MB
WF-825-BT Antenna SpecificationTest Report2024-03-25PDF 657.5 KB
WF-825-Wi-Fi Antenna ReportTest Report2024-03-25PDF 5.1 MB
ACB-FORM-FCC-Application-Letters-Covered-List-AttestationAttestation Statements2024-03-25PDF 223.1 KB
ACB-FORM-FCC-Application-Letters-U.S.-Agent-Letter-for-Service-of-ProcessAttestation Statements2024-03-25PDF 118.8 KB
WF-825-FCC 6ID letterAttestation Statements2024-03-25PDF 273.2 KB
WF-825-FCC Attestation LetterCover Letter(s)2024-03-25PDF 215.3 KB
SOFTDR Check List Metadata onlyCover Letter(s)2024-03-25PDF 65.6 KB
UN6GHz Check List Metadata onlyCover Letter(s)2024-03-25PDF 3.6 MB
WF-825-FCC Confidentiality Request LetterCover Letter(s)2024-03-25PDF 238.3 KB
WF-825-FCC Declaration of AuthorizationCover Letter(s)2024-03-25PDF 217.9 KB
WF-825-FCC Declaration of ConformityCover Letter(s)2024-03-25PDF 232.7 KB
WF-825-KDB442812 Cover LetterCover Letter(s)2024-03-25PDF 293.5 KB
WF-825-Model Difference Declaration letterCover Letter(s)2024-03-25PDF 127.9 KB
WF-825-SDR letterCover Letter(s)2024-03-25PDF 219.4 KB
2312RSU008-U6-FCC Exposure ReportRF Exposure Info2024-03-25PDF 403.2 KB
Confidential_WF-825_Block diagram Metadata onlyBlock DiagramPDF 683.1 KB
Confidential_WF-825_Schematic Metadata onlySchematicsPDF 1.3 MB
Confidential_WF-825_Schematic Metadata onlySchematicsPDF 775.4 KB
Confidential_WF-825_Operation Description Metadata onlyOperational DescriptionPDF 155.5 KB
WF-825-Software Security Requirements Cover Letter Metadata onlySDR Software/Security Info.PDF 258.5 KB

Application Information

Application IDz137tFt7tFI6BzHRD3Z7Lg==
Final Action Date2024-03-25
Application PurposeOriginal Equipment
Applicant FRN0005810783
ModelWF825
Frequency Range5955-7095 MHz
Equipment Class6ID - 15E 6 GHz Low Power Indoor Access Point
Device DescriptionTri-band Wi-Fi 7 Wireless AP
Responsible PartyZhe Liu, Product Manager, Jet.liu@actiontec.com , 9093138262
AgentMarlin Marlin Marlin, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , 86-512-66308358
Technical ContactMarlin Chen, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , 86-512-66308358
Non-Technical ContactMarlin Chen, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , 86-512-66308358
Test FirmMr. Marlin Chen, MRT Technology (Suzhou) Co., Ltd., marlinchen@mrt-cert.com , +86-512-66308358
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower Output listed is EIRP. This device is restricted to indoor use only. Device is a 802.11 a/ax/be device in a 4x4 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 45 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz, 160MHz and 320MHz bandwidth modes in 6 GHz WLAN transmitter and it contains BLE, 2.4 GHz and 5 GHz WLAN transmitters.

Applications

Application IDDatePurpose
z137tFt7tFI6BzHRD3Z7Lg==2024-03-25Original Equipment
PuhfbkOpdnKegJsF+b4bOg==2024-03-25Original Equipment
F/9ax2y3+SSY7WwOVkVpkA==2024-03-25Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.008515CCC
2412-2462 MHz0.897415CCC, MO
5180-5240 MHz0.679215ECC, MO
5250 MHz0.205615ECC, MO, ND
5260-5320 MHz0.234415ECC, MO, ND
5500-5720 MHz0.244315ECC, MO, ND
5745-5825 MHz0.827915ECC, MO
5955-7095 MHz0.891300015ECC, EP, MO

Grants

TCB Grant - Application z137tFt7tFI6BzHRD3Z7Lg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 03/25/2024

Application Dated: 03/15/2024
Actiontec Electronics Inc
2445 Augustine Drive
Suite 501
Santa Clara, CA 95054
 
Attention: Zhe Liu , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQ-WF825
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: Tri-band Wi-Fi 7 Wireless AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7095.0 0.8913  

Power Output listed is EIRP. This device is restricted to indoor use only. Device is a 802.11 a/ax/be device in a 4x4 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 45 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz, 160MHz and 320MHz bandwidth modes in 6 GHz WLAN transmitter and it contains BLE, 2.4 GHz and 5 GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application z137tFt7tFI6BzHRD3Z7Lg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Actiontec Electronics Inc
2445 Augustine Drive Suite 501
Santa Clara, CA 95054
United States
  Date of Grant: 03/25/2024

Application Dated: 03/15/2024
 
Attention: Zhe Liu , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQ-WF825
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: Tri-band Wi-Fi 7 Wireless AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7095.0 0.8913  

Power Output listed is EIRP. This device is restricted to indoor use only. Device is a 802.11 a/ax/be device in a 4x4 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 45 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz, 160MHz and 320MHz bandwidth modes in 6 GHz WLAN transmitter and it contains BLE, 2.4 GHz and 5 GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application PuhfbkOpdnKegJsF+b4bOg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 03/25/2024

Application Dated: 03/15/2024
Actiontec Electronics Inc
2445 Augustine Drive
Suite 501
Santa Clara, CA 95054
 
Attention: Zhe Liu , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQ-WF825
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Digital Transmission System
Notes: Tri-band Wi-Fi 7 Wireless AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0085  
CC MO 15C 2412.0  -  2462.0 0.8974  

Power Output listed is output power conducted. Device is an 802.11b/g/n/ax device in a 4x4 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 45 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter. It contains 5GHz/6GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application PuhfbkOpdnKegJsF+b4bOg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Actiontec Electronics Inc
2445 Augustine Drive Suite 501
Santa Clara, CA 95054
United States
  Date of Grant: 03/25/2024

Application Dated: 03/15/2024
 
Attention: Zhe Liu , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQ-WF825
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Digital Transmission System
Notes: Tri-band Wi-Fi 7 Wireless AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0085  
CC MO 15C 2412.0  -  2462.0 0.8974  

Power Output listed is output power conducted. Device is an 802.11b/g/n/ax device in a 4x4 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 45 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter. It contains 5GHz/6GHz WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application F/9ax2y3+SSY7WwOVkVpkA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 03/25/2024

Application Dated: 03/15/2024
Actiontec Electronics Inc
2445 Augustine Drive
Suite 501
Santa Clara, CA 95054
 
Attention: Zhe Liu , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQ-WF825
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Tri-band Wi-Fi 7 Wireless AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.6792  
CC MO ND 15E 5260.0  -  5320.0 0.2344  
CC MO ND 15E 5500.0  -  5720.0 0.2443  
CC MO 15E 5745.0  -  5825.0 0.8279  
CC MO ND 15E 5250.0  -  5250.0 0.2056  

Power Output listed is output power conducted. Device is a 802.11a/n/ac/ax/be device in a 4x4 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 45 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes in 5GHz WLAN transmitter. It contains 2.4GHz/6GHz WLAN and BLE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application F/9ax2y3+SSY7WwOVkVpkA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Actiontec Electronics Inc
2445 Augustine Drive Suite 501
Santa Clara, CA 95054
United States
  Date of Grant: 03/25/2024

Application Dated: 03/15/2024
 
Attention: Zhe Liu , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQ-WF825
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Tri-band Wi-Fi 7 Wireless AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.6792  
CC MO ND 15E 5260.0  -  5320.0 0.2344  
CC MO ND 15E 5500.0  -  5720.0 0.2443  
CC MO 15E 5745.0  -  5825.0 0.8279  
CC MO ND 15E 5250.0  -  5250.0 0.2056  

Power Output listed is output power conducted. Device is a 802.11a/n/ac/ax/be device in a 4x4 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 45 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes in 5GHz WLAN transmitter. It contains 2.4GHz/6GHz WLAN and BLE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: