FCC ID LNQM6240V

GbE 11AC Fiber Gateway

by Actiontec Electronics Inc

Grantee Code: LNQ   Product Code: M6240V
Latest application date: 2015-09-11

FCC ID Device Details

FCC IDLNQM6240V
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLNQ
Product CodeM6240V
Applicant BusinessActiontec Electronics Inc 🇺🇸
Related Domains actiontec.com
Equipment ClassGbE 11AC Fiber Gateway
Test FirmMicom Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass III permissive change to software defined radio2015-09-11
5180-5240 MHzOriginal Equipment2015-08-11
2412-2462 MHzOriginal Equipment2015-08-11

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2016-01-31PDF 490.9 KB
Manual Metadata onlyUsers Manual2015-09-11PDF 380.2 KB
Manual r1Users Manual2015-09-11PDF 614.9 KB
IntInternal Photos2016-01-31PDF 1.7 MB
ExtExternal Photos2016-01-31PDF 767.1 KB
LabelID Label/Location Info2015-09-11PDF 317.3 KB
SetupTest Setup Photos2016-01-31PDF 1.1 MB
DFS r1 Metadata onlyTest Report2015-09-11PDF 4.1 MB
DFS rBTest Report2015-09-11PDF 4.2 MB
NII Conducted part 1Test Report2015-09-11PDF 5.1 MB
NII Conducted part 2Test Report2015-09-11PDF 4 MB
NII DFS Metadata onlyTest Report2015-09-11PDF 4.4 MB
NII RadiatedTest Report2015-09-11PDF 1.9 MB
DTS ConductedTest Report2015-08-11PDF 5.2 MB
DTS RadiatedTest Report2015-08-11PDF 1.7 MB
NII ConductedTest Report2015-08-11PDF 4.6 MB
NII RadiatedTest Report2015-08-11PDF 1.4 MB
Software Security AttestationCover Letter(s)2015-09-11PDF 32.6 KB
SW Config AttestationCover Letter(s)2015-08-11PDF 32.6 KB
AuthorizationCover Letter(s)2015-09-11PDF 32 KB
Expidited Review RequestCover Letter(s)2015-09-11PDF 93 KB
Model DeclarationCover Letter(s)2015-09-11PDF 30.7 KB
Software Config Control DeclarationCover Letter(s)2015-09-11PDF 31.9 KB
ConfidCover Letter(s)2015-08-11PDF 37.6 KB
Declaration of SimilarityCover Letter(s)2015-08-11PDF 30.7 KB
DofCCover Letter(s)2015-08-11PDF 30.4 KB
RFxRF Exposure Info2015-09-11PDF 135.5 KB
MPERF Exposure Info2015-08-11PDF 127.8 KB
RFxRF Exposure Info2015-08-11PDF 127.8 KB
Block Metadata onlyBlock DiagramPDF 27.7 KB
Schema Metadata onlySchematicsPDF 1,020.6 KB
Ops Metadata onlyOperational DescriptionPDF 67.3 KB
NII Software Security Metadata onlySDR Software/Security InfPDF 95.1 KB
PCIII Declaration Metadata onlySDR Software/Security InfPDF 33.6 KB
SDR Declaration Metadata onlySDR Software/Security InfPDF 743.7 KB
SDR Description Metadata onlySDR Software/Security InfPDF 743.7 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 194 KB

Application Information

Application IDeacMfHpoi3adiCu2X7uWhw==
Final Action Date2015-09-11
Application PurposeClass III permissive change to software defined radio
Applicant FRN0005810783
ModelM6240V
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionGbE 11AC Fiber Gateway
Responsible PartyBrian Henrichs, President, bhenrichs@actiontec.com , 4088579658
Technical ContactGordon Hurst, MiCOM Labs, certification@micomlabs.com , (925)4620304
Test FirmGordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. Indoor use only. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidths.

Applications

Application IDDatePurpose
eacMfHpoi3adiCu2X7uWhw==2015-09-11Class III permissive change to software defined radio
nB/eZvkiX6KgBpp4mkeXtg==2015-08-11Original Equipment
2/mN1T+bb/LURSJ0gmUBDQ==2015-08-11Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.923000015CCC, MO
5180-5240 MHz0.68415E38, CC, MO
5260-5320 MHz0.23915E38, CC, MO
5500-5720 MHz0.23515E38, CC, MO
5745-5825 MHz0.64315E38, CC, MO
5745-5825 MHz0.64315E36, CC, MO

Grants

TCB Grant - Application nB/eZvkiX6KgBpp4mkeXtg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/11/2015

Application Dated: 08/04/2015
Actiontec Electronics Inc
2445 Augustine Drive
Suite 501
Santa Clara, CA 95054
 
Attention: Brian Henrichs , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQM6240V
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: GbE 11ac Fiber Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.684  
38 CC MO 15E 5745.0  -  5825.0 0.643  

Power Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20, 40 and 80 MHz bandwidths.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application nB/eZvkiX6KgBpp4mkeXtg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Actiontec Electronics Inc
2445 Augustine Drive Suite 501
Santa Clara, CA 95054
United States
  Date of Grant: 08/11/2015

Application Dated: 08/04/2015
 
Attention: Brian Henrichs , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQM6240V
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: GbE 11ac Fiber Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.684  
38 CC MO 15E 5745.0  -  5825.0 0.643  

Power Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20, 40 and 80 MHz bandwidths.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application eacMfHpoi3adiCu2X7uWhw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 09/11/2015

Application Dated: 08/14/2015
Actiontec Electronics Inc
2445 Augustine Drive
Suite 501
Santa Clara, CA 95054
 
Attention: Brian Henrichs , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQM6240V
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: GbE 11AC Fiber Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.684  
38 CC MO 15E 5260.0  -  5320.0 0.239  
38 CC MO 15E 5500.0  -  5720.0 0.235  
36 CC MO 15E 5745.0  -  5825.0 0.643  

Power Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. Indoor use only. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20, 40 and 80 MHz bandwidths.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application eacMfHpoi3adiCu2X7uWhw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Actiontec Electronics Inc
2445 Augustine Drive Suite 501
Santa Clara, CA 95054
United States
  Date of Grant: 09/11/2015

Application Dated: 08/14/2015
 
Attention: Brian Henrichs , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQM6240V
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: GbE 11AC Fiber Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.684  
38 CC MO 15E 5260.0  -  5320.0 0.239  
38 CC MO 15E 5500.0  -  5720.0 0.235  
36 CC MO 15E 5745.0  -  5825.0 0.643  

Power Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. Indoor use only. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20, 40 and 80 MHz bandwidths.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2/mN1T+bb/LURSJ0gmUBDQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/11/2015

Application Dated: 08/04/2015
Actiontec Electronics Inc
2445 Augustine Drive
Suite 501
Santa Clara, CA 95054
 
Attention: Brian Henrichs , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQM6240V
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Digital Transmission System
Notes: GbE 11AC Fiber Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.923  

Power Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20, 40 and 80 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2/mN1T+bb/LURSJ0gmUBDQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Actiontec Electronics Inc
2445 Augustine Drive Suite 501
Santa Clara, CA 95054
United States
  Date of Grant: 08/11/2015

Application Dated: 08/04/2015
 
Attention: Brian Henrichs , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LNQM6240V
Name of Grantee:  Actiontec Electronics Inc
Equipment Class: Digital Transmission System
Notes: GbE 11AC Fiber Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.923  

Power Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20, 40 and 80 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: