FCC ID LNQWXB6X00Q
802.11ac Wireless Ethernet Bridge with Bonded LAN MoCA
by Actiontec Electronics Inc
Grantee Code: LNQ Product Code: WXB6X00Q
Latest application date: 2015-07-16
FCC ID Device Details
| FCC ID | LNQWXB6X00Q |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | LNQ |
| Product Code | WXB6X00Q |
| Applicant Business | Actiontec Electronics Inc 🇺🇸 |
| Related Domains |  actiontec.com |
| Equipment Class | 802.11ac Wireless Ethernet Bridge with Bonded LAN MoCA |
| Test Firm | MiCOM Labs |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class III permissive change to software defined radio | 2015-07-16 |
| 2412-2462 MHz | Original Equipment | 2015-03-26 |
| 5180-5240 MHz | Original Equipment | 2015-03-26 |
| 5180-5240 MHz | Original Equipment | 2015-03-18 |
| 2412-2462 MHz | Original Equipment | 2015-03-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Draft Manual Metadata only | Users Manual | 2015-09-14 | PDF 739.6 KB |
| Manual Metadata only | Users Manual | 2015-09-14 | PDF 605.9 KB |
| Manual v3 | Users Manual | 2015-09-14 | PDF 739.3 KB |
| Manual | Users Manual | 2015-07-16 | PDF 739.3 KB |
| User Manual Metadata only | Users Manual | 2015-06-20 | PDF 193.6 KB |
| Int | Internal Photos | 2015-09-14 | PDF 1.3 MB |
| Internal Photos Metadata only | Internal Photos | 2015-06-20 | PDF 1.3 MB |
| Ext | External Photos | 2015-09-14 | PDF 1.1 MB |
| Ext | External Photos | 2015-07-16 | PDF 143 KB |
| External Photos Metadata only | External Photos | 2015-06-20 | PDF 537.7 KB |
| Label | ID Label/Location Info | 2015-07-16 | PDF 132.8 KB |
| Label | ID Label/Location Info | 2015-03-26 | PDF 133.1 KB |
| ID Label Location Metadata only | ID Label/Location Info | PDF 133.1 KB | |
| Block | Block Diagram | 2015-09-14 | PDF 66.8 KB |
| Setup | Test Setup Photos | 2015-09-14 | PDF 141.1 KB |
| Setup | Test Setup Photos | 2015-07-16 | PDF 139.3 KB |
| Test Setup Photos Metadata only | Test Setup Photos | 2015-06-20 | PDF 231.6 KB |
| DFS Report | Test Report | 2015-07-16 | PDF 4.8 MB |
| NII Part 1 | Test Report | 2015-07-16 | PDF 1.9 MB |
| NII Part 2 | Test Report | 2015-07-16 | PDF 5.8 MB |
| DTS 1 r1 | Test Report | 2015-03-26 | PDF 5.9 MB |
| DTS 2 | Test Report | 2015-03-26 | PDF 2.5 MB |
| DTS 3 | Test Report | 2015-03-26 | PDF 2.9 MB |
| NII Part 1 1 rev 1 | Test Report | 2015-03-26 | PDF 2.9 MB |
| NII Part 1 2 rev 1 | Test Report | 2015-03-26 | PDF 3.8 MB |
| NII Part 2 | Test Report | 2015-03-26 | PDF 5.7 MB |
| NII Part 3 | Test Report | 2015-03-26 | PDF 5.4 MB |
| NII Part 4 | Test Report | 2015-03-26 | PDF 4.3 MB |
| NII Part 5 | Test Report | 2015-03-26 | PDF 3 MB |
| Test Report Metadata only | Test Report | PDF 4.8 MB | |
| Test Report Metadata only | Test Report | PDF 5.7 MB | |
| Attestation Letter | Cover Letter(s) | PDF 60.4 KB | |
| Authorization | Cover Letter(s) | 2015-07-16 | PDF 38.9 KB |
| DofC | Cover Letter(s) | 2015-07-16 | PDF 38.2 KB |
| Authorization | Cover Letter(s) | 2015-03-26 | PDF 37.1 KB |
| Authorization Letter | Cover Letter(s) | 2015-03-26 | PDF 37.1 KB |
| Confid | Cover Letter(s) | 2015-03-26 | PDF 43.7 KB |
| DofC | Cover Letter(s) | 2015-03-26 | PDF 38.2 KB |
| Authorization Letter | Cover Letter(s) | PDF 38.8 KB | |
| Confidentiality Letter | Cover Letter(s) | PDF 57.4 KB | |
| Cover Letter | Cover Letter(s) | PDF 37.6 KB | |
| Dismissal Letter | Cover Letter(s) | PDF 36.2 KB | |
| Dismissal request | Cover Letter(s) | PDF 36.2 KB | |
| RFx | RF Exposure Info | 2015-07-16 | PDF 82.3 KB |
| RF Exposure Metadata only | RF Exposure Info | PDF 82.3 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 43.1 KB | |
| Schema Metadata only | Schematics | PDF 1.7 MB | |
| Schematics Metadata only | Schematics | PDF 2.2 MB | |
| Operational Description Metadata only | Operational Description | PDF 45.6 KB | |
| Ops Metadata only | Operational Description | PDF 45.1 KB | |
| Rev 4 SDR security and configuration Metadata only | SDR Software/Security Inf | PDF 91.5 KB | |
| SDR Security Description and Configuation Metadata only | SDR Software/Security Inf | PDF 91.5 KB | |
| SW Control Metadata only | SDR Software/Security Inf | PDF 90.7 KB | |
| SW Security Metadata only | SDR Software/Security Inf | PDF 283.9 KB | |
| Software Control Metadata only | SDR Software/Security Inf | PDF 90.7 KB | |
| Software Security Metadata only | SDR Software/Security Inf | PDF 283.9 KB | |
| Ant Spec Metadata only | Parts List/Tune Up Info | PDF 1.9 MB |
Application Information
| Application ID | AJ0ogULLRalDBL+0xHkZ6Q== |
|---|---|
| Final Action Date | 2015-07-16 |
| Application Purpose | Class III permissive change to software defined radio |
| Applicant FRN | 0005810783 |
| Model | WXB6X00Q |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11ac Wireless Ethernet Bridge with Bonded LAN MoCA |
| Responsible Party | Brian Henrichs, President, bhenrichs@actiontec.com , 4088579658 |
| Technical Contact | Gordon Hurst, MiCOM Labs, certification@micomlabs.com  , (925)4620304 |
| Test Firm | Gordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com , 925-462-0304 |
| TCB Email | certification@micomlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidths. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| AJ0ogULLRalDBL+0xHkZ6Q== | 2015-07-16 | Class III permissive change to software defined radio |
| tnIL7gPao/8oxWDDDCgK/A== | 2015-03-26 | Original Equipment |
| nytwFRHxSJH7N4MVQr4bgQ== | 2015-03-26 | Original Equipment |
| rob7cA0Rgc8ZZmhGWITjDA== | 2015-03-18 | Original Equipment |
| 1l5yVlo/nCSdOICVBKh6xg== | 2015-03-18 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application tnIL7gPao/8oxWDDDCgK/A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 03/26/2015 Application Dated: 03/18/2015 |
| Actiontec Electronics Inc |
| 2445 Augustine Drive |
| Suite 501 |
| Santa Clara, CA 95054 |
| Attention: Brian Henrichs , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LNQWXB6X00Q |
| Name of Grantee: | Actiontec Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ac Wireless Ethernet Bridge with Bonded LAN MoCA |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.4055 |
| Power Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is intended for indoor use only. This device has 20 and 40 MHz bandwidths. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application tnIL7gPao/8oxWDDDCgK/A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Actiontec Electronics Inc 2445 Augustine Drive Suite 501 Santa Clara, CA 95054 United States |
Date of Grant: 03/26/2015 Application Dated: 03/18/2015 |
| Attention: Brian Henrichs , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LNQWXB6X00Q |
| Name of Grantee: | Actiontec Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ac Wireless Ethernet Bridge with Bonded LAN MoCA |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.4055 |
| Power Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is intended for indoor use only. This device has 20 and 40 MHz bandwidths. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 03/26/2015 Application Dated: 03/18/2015 |
| Actiontec Electronics Inc |
| 2445 Augustine Drive |
| Suite 501 |
| Santa Clara, CA 95054 |
| Attention: Brian Henrichs , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LNQWXB6X00Q |
| Name of Grantee: | Actiontec Electronics Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ac Wireless Ethernet Bridge with Bonded LAN MoCA |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.5888 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.4325 |
| Power Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is intended for indoor use only. This device has 20, 40 and 80 MHz bandwidths. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application nytwFRHxSJH7N4MVQr4bgQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Actiontec Electronics Inc 2445 Augustine Drive Suite 501 Santa Clara, CA 95054 United States |
Date of Grant: 03/26/2015 Application Dated: 03/18/2015 |
| Attention: Brian Henrichs , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LNQWXB6X00Q |
| Name of Grantee: | Actiontec Electronics Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ac Wireless Ethernet Bridge with Bonded LAN MoCA |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.5888 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.4325 |
| Power Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is intended for indoor use only. This device has 20, 40 and 80 MHz bandwidths. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 07/16/2015 Application Dated: 05/28/2015 |
| Actiontec Electronics Inc |
| 2445 Augustine Drive |
| Suite 501 |
| Santa Clara, CA 95054 |
| Attention: Brian Henrichs , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LNQWXB6X00Q |
| Name of Grantee: | Actiontec Electronics Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ac Wireless Ethernet Bridge with Bonded LAN MoCA |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.5888 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.1734 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.1633 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.4325 |
| Power Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidths. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application AJ0ogULLRalDBL+0xHkZ6Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Actiontec Electronics Inc 2445 Augustine Drive Suite 501 Santa Clara, CA 95054 United States |
Date of Grant: 07/16/2015 Application Dated: 05/28/2015 |
| Attention: Brian Henrichs , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LNQWXB6X00Q |
| Name of Grantee: | Actiontec Electronics Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ac Wireless Ethernet Bridge with Bonded LAN MoCA |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.5888 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.1734 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.1633 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.4325 |
| Power Output listed is maximum combined Conducted power operating in a 4x4 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidths. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |