FCC ID LO6-DVRS700

LO6DVRS700, LO6 DVRS700, LO6-DVRS700, LO6-DVRS7OO, LO6-DVR5700, L06-DVRS700

Futurecom Systems Group ULC. MOBEXCOM DVR Vehicular Repeater -DVRS700

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: LO6-DVRS700 is LO6. The remaining characters of the FCC ID, -DVRS700, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: MOBEXCOM DVR Vehicular Repeater

App # Purpose Date Unique ID
1 Original Equipment 2005-07-11 eevhU6AbN4sR/iNnlx0jxw==
2 Class II Permissive Change 2005-10-06 l7WI7AyD2RGqZ7N7TZPjeg==
3 Class II Permissive Change 2005-10-28 mSH3TkSM13Hxg1oU/Zpcog==
4 Class II Permissive Change 2005-12-16 RZWHqiXxSbriZ5NxoibOQw==
5 Class II Permissive Change 2007-03-26 qFnGRp4Gs5XWj4xy8qssHA==
6 Class II Permissive Change 2013-03-28 fth+CjwnEsAvck09dl1xnA==
7 Class II Permissive Change 2013-06-28 lfuWKZqdxNFWrQniR1vVRA==
8 Class II Permissive Change 2017-06-06 npuWDcW2+WwBJSAQzpshUg==
9 Class II Permissive Change 2018-03-20 fIvovksnNKFHSNmLJkWY4w==
10 Class II Permissive Change 2018-10-26 QcSvj01zww6I1OMKka+ULw==
11 Class II Permissive Change 2019-01-03 3hERXIqfboRiLkmmJoQ2dg==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: LTE 20,800 DD DOWN | UMTS CH 20 DOWN |
Frequency RangePower OutputToleranceEmission DesignatorRule PartsGrant Notes App #
764-776 MHz20 Watts1.5ppm11K0F3E9BC 1.1
764-776 MHz20 Watts1.5ppm16K0F3E9BC 1.2
764-776 MHz20 Watts1.5ppm7K30F1E9BC 1.3
764-776 MHz20 Watts1.5ppm11K0F3E9BC 6.1
764-776 MHz20 Watts1.5ppm16K0F3E9BC 6.2
764-776 MHz20 Watts1.5ppm7K30F1E9BC 6.3
764-776 MHz20 Watts1.5ppm11K0F3E9BC 2.1
764-776 MHz20 Watts1.5ppm16K0F3E9BC 2.2
764-776 MHz20 Watts1.5ppm7K30F1E9BC 2.3
764-776 MHz20 Watts1.5ppm11K0F3E9BC 7.1
764-776 MHz20 Watts1.5ppm16K0F3E9BC 7.2
764-776 MHz20 Watts1.5ppm7K30F1E9BC 7.3
764-776 MHz20 Watts1.5ppm11K0F3E9BC 3.1
764-776 MHz20 Watts1.5ppm16K0F3E9BC 3.2
764-776 MHz20 Watts1.5ppm7K30F1E9BC 3.3
764-776 MHz20 Watts1.5ppm11K0F3E9BC 5.1
764-776 MHz20 Watts1.5ppm16K0F3E9BC 5.2
764-776 MHz20 Watts1.5ppm7K30F1E9BC 5.3
764-776 MHz20 Watts1.5ppm11K0F3E9BC 4.1
764-776 MHz20 Watts1.5ppm16K0F3E9BC 4.2
764-776 MHz20 Watts1.5ppm7K30F1E9BC 4.3
764-776 MHz20 Watts1.5ppm11K0F3E9BC 8.1
764-776 MHz20 Watts1.5ppm16K0F3E9BC 8.2
764-776 MHz20 Watts1.5ppm7K30F1E9BC 8.3
764-776 MHz20 Watts1.5ppm8K10F1E9BC 8.4
764-776 MHz20 Watts1.5ppm11K0F3E9BC 9.1
764-776 MHz20 Watts1.5ppm16K0F3E9BC 9.2
764-776 MHz20 Watts1.5ppm7K30F1E9BC 9.3
764-776 MHz20 Watts1.5ppm8K10F1E9BC 9.4
764-776 MHz20 Watts1.5ppm11K0F3E9BC 10.1
764-776 MHz20 Watts1.5ppm16K0F3E9BC 10.2
764-776 MHz20 Watts1.5ppm7K30F1E9BC 10.3
764-776 MHz20 Watts1.5ppm8K10F1E9BC 10.4
764-776 MHz20 Watts1.5ppm11K0F3E9BC 11.1
764-776 MHz20 Watts1.5ppm16K0F3E9BC 11.2
764-776 MHz20 Watts1.5ppm7K30F1E9BC 11.3
764-776 MHz20 Watts1.5ppm8K10F1E9BC 11.4
794-806 MHz20 Watts1.5ppm11K0F3E9BC 1.4
794-806 MHz20 Watts1.5ppm16K0F3E9BC 1.5
794-806 MHz20 Watts1.5ppm7K30F1E9BC 1.6
794-806 MHz20 Watts1.5ppm11K0F3E9BC 6.4
794-806 MHz20 Watts1.5ppm16K0F3E9BC 6.5
794-806 MHz20 Watts1.5ppm7K30F1E9BC 6.6
794-806 MHz20 Watts1.5ppm11K0F3E9BC 2.4
794-806 MHz20 Watts1.5ppm16K0F3E9BC 2.5
794-806 MHz20 Watts1.5ppm7K30F1E9BC 2.6
794-806 MHz20 Watts1.5ppm11K0F3E9BC 7.4
794-806 MHz20 Watts1.5ppm16K0F3E9BC 7.5
794-806 MHz20 Watts1.5ppm7K30F1E9BC 7.6
794-806 MHz20 Watts1.5ppm11K0F3E9BC 3.4
794-806 MHz20 Watts1.5ppm16K0F3E9BC 3.5
794-806 MHz20 Watts1.5ppm7K30F1E9BC 3.6
794-806 MHz20 Watts1.5ppm11K0F3E9BC 5.4
794-806 MHz20 Watts1.5ppm16K0F3E9BC 5.5
794-806 MHz20 Watts1.5ppm7K30F1E9BC 5.6
794-806 MHz20 Watts1.5ppm11K0F3E9BC 4.4
794-806 MHz20 Watts1.5ppm16K0F3E9BC 4.5
794-806 MHz20 Watts1.5ppm7K30F1E9BC 4.6
794-806 MHz20 Watts1.5ppm11K0F3E9BC 8.5
794-806 MHz20 Watts1.5ppm16K0F3E9BC 8.6
794-806 MHz20 Watts1.5ppm7K30F1E9BC 8.7
794-806 MHz20 Watts1.5ppm8K10F1E9BC 8.8
794-806 MHz20 Watts1.5ppm11K0F3E9BC 9.5
794-806 MHz20 Watts1.5ppm16K0F3E9BC 9.6
794-806 MHz20 Watts1.5ppm7K30F1E9BC 9.7
794-806 MHz20 Watts1.5ppm8K10F1E9BC 9.8
794-806 MHz20 Watts1.5ppm11K0F3E9BC 10.5
794-806 MHz20 Watts1.5ppm16K0F3E9BC 10.6
794-806 MHz20 Watts1.5ppm7K30F1E9BC 10.7
794-806 MHz20 Watts1.5ppm8K10F1E9BC 10.8
794-806 MHz20 Watts1.5ppm11K0F3E9BC 11.5
794-806 MHz20 Watts1.5ppm16K0F3E9BC 11.6
794-806 MHz20 Watts1.5ppm7K30F1E9BC 11.7
794-806 MHz20 Watts1.5ppm8K10F1E9BC 11.8

Exhibits

Available Exhibits

App #Document Type Submitted
Available
11 Installation ManualUsers Manual
Adobe Acrobat PDF (3204 kB)
2018-12-10
2019-01-03
11 RF Safety BookletUsers Manual
Adobe Acrobat PDF (885 kB)
2018-12-10
2019-01-03
11 RF Exposure Training and Product Safety InformationUsers Manual
Adobe Acrobat PDF (274 kB)
2018-12-10
2019-01-03
11 User ManualUsers Manual
Adobe Acrobat PDF (185 kB)
2018-12-10
2019-01-03
11 AN000131A01 All Band ValidationRF Exposure Info
Adobe Acrobat PDF (551 kB)
2018-12-10
2019-01-03
11 SAR Report Appendix BRF Exposure Info
Adobe Acrobat PDF (1152 kB)
2018-12-10
2019-01-03
11 SAR Report Appendix ARF Exposure Info
Adobe Acrobat PDF (1531 kB)
2018-12-10
2019-01-03
11 SAR ReportRF Exposure Info
Adobe Acrobat PDF (616 kB)
2018-12-10
2019-01-03
11 MPE Assessment 3 of 3RF Exposure Info
Adobe Acrobat PDF (1114 kB)
2018-12-10
2019-01-03
11 MPE Assessment 2 of 3RF Exposure Info
Adobe Acrobat PDF (1753 kB)
2018-12-10
2019-01-03
11 MPE Assessment 1 of 3RF Exposure Info
Adobe Acrobat PDF (2699 kB)
2018-12-10
2019-01-03
11 System ConfigurationExternal Photos
Adobe Acrobat PDF (103 kB)
2018-12-10
2019-01-03
11 Cover LetterCover Letter(s)
Adobe Acrobat PDF (66 kB)
2018-12-10
2019-01-03
11 C2PCCover Letter(s)
Adobe Acrobat PDF (37 kB)
2018-12-10
2019-01-03
11 Agent AuthorizationCover Letter(s)
Adobe Acrobat PDF (33 kB)
2018-12-10
2019-01-03
11 Manufacturer AttestationCover Letter(s)
Adobe Acrobat PDF (36 kB)
2018-12-10
2019-01-03
10 Test SetupTest Setup Photos
Adobe Acrobat PDF (244 kB)
2018-10-26
2018-10-26
10 Test ReportTest Report
Adobe Acrobat PDF (761 kB)
2018-10-26
2018-10-26
10 Internal PhotosInternal Photos
Adobe Acrobat PDF (3051 kB)
2018-10-26
2018-10-26
10 Cover LetterCover Letter(s)
Adobe Acrobat PDF (67 kB)
2018-10-26
2018-10-26
10 Confidentiality RequestCover Letter(s)
Adobe Acrobat PDF (33 kB)
2018-10-26
2018-10-26
10 C2PC RequestCover Letter(s)
Adobe Acrobat PDF (35 kB)
2018-10-26
2018-10-26
10 Agent AuthorizationCover Letter(s)
Adobe Acrobat PDF (33 kB)
2018-10-26
2018-10-26
9 Confidential RequestCover Letter(s)
Adobe Acrobat PDF (33 kB)
2018-03-20
2018-03-20
9 RF Safety Booklet RevisedUsers Manual
Adobe Acrobat PDF (725 kB)
2018-03-20
2018-03-20
9 User Manual RevisedUsers Manual
Adobe Acrobat PDF (185 kB)
2018-03-20
2018-03-20
9 C2PC Request RevisedCover Letter(s)
Adobe Acrobat PDF (37 kB)
2018-03-20
2018-03-20
9 Cover Letter RevisedCover Letter(s)
Adobe Acrobat PDF (53 kB)
2018-03-20
2018-03-20
9 SAR Report RevisedRF Exposure Info
Adobe Acrobat PDF (418 kB)
2018-03-20
2018-03-20
9 SAR Report Appendix B RevisedRF Exposure Info
Adobe Acrobat PDF (1146 kB)
2018-03-20
2018-03-20
9 SAR Report Appendix A RevisedRF Exposure Info
Adobe Acrobat PDF (1531 kB)
2018-03-20
2018-03-20
9 MPE Assessment 3 of 3 RevisedRF Exposure Info
Adobe Acrobat PDF (856 kB)
2018-03-20
2018-03-20
9 MPE Assessment 2 of 3 RevisedRF Exposure Info
Adobe Acrobat PDF (1520 kB)
2018-03-20
2018-03-20
9 Trimmable AntennaUsers Manual
Adobe Acrobat PDF (3204 kB)
2018-03-20
2018-03-20
9 MPE Assessment 1 of 3 RevisedRF Exposure Info
Adobe Acrobat PDF (1803 kB)
2018-03-20
2018-03-20
9 RF Safety BookletUsers Manual
Adobe Acrobat PDF (713 kB)
2017-06-27
2018-03-20
9 User ManualUsers Manual
Adobe Acrobat PDF (149 kB)
2017-06-27
2018-03-20
9 SAR Report - Appendix BRF Exposure Info
Adobe Acrobat PDF (4901 kB)
2017-06-27
2018-03-20
9 SAR Report - Appendix ARF Exposure Info
Adobe Acrobat PDF (1799 kB)
2017-06-27
2018-03-20
9 SAR ReportRF Exposure Info
Adobe Acrobat PDF (453 kB)
2017-06-27
2018-03-20
9 MPE Assessment 3 of 3RF Exposure Info
Adobe Acrobat PDF (941 kB)
2017-06-27
2018-03-20
9 MPE Assessment 2 of 3RF Exposure Info
Adobe Acrobat PDF (1582 kB)
2017-06-27
2018-03-20
9 MPE Assessment 1 of 3RF Exposure Info
Adobe Acrobat PDF (1954 kB)
2017-06-27
2018-03-20
9 System ConfigurationExternal Photos
Adobe Acrobat PDF (103 kB)
2017-06-27
2018-03-20
9 Cover LetterCover Letter(s)
Adobe Acrobat PDF (52 kB)
2017-06-27
2018-03-20
9 C2PC RequestCover Letter(s)
Adobe Acrobat PDF (37 kB)
2017-06-27
2018-03-20
9 Agent AuthorizationCover Letter(s)
Adobe Acrobat PDF (33 kB)
2017-06-27
2018-03-20
8 RF Safety BookletUsers Manual
Adobe Acrobat PDF (514 kB)
2017-06-06
2017-06-06
8 User ManualUsers Manual
Adobe Acrobat PDF (149 kB)
2017-06-06
2017-06-06
8 MPE Assessment 3 of 3RF Exposure Info
Adobe Acrobat PDF (350 kB)
2017-06-06
2017-06-06
8 MPE Assessment 2 of 3RF Exposure Info
Adobe Acrobat PDF (461 kB)
2017-06-06
2017-06-06
8 MPE Assessment 1 of 3RF Exposure Info
Adobe Acrobat PDF (1630 kB)
2017-06-06
2017-06-06
8 External Photo of System ConfigurationExternal Photos
Adobe Acrobat PDF (103 kB)
2017-06-06
2017-06-06
8 Cover LetterCover Letter(s)
Adobe Acrobat PDF (53 kB)
2017-06-06
2017-06-06
8 C2PC Request 2Cover Letter(s)
Adobe Acrobat PDF (37 kB)
2017-06-06
2017-06-06
8 C2PC Request 1Cover Letter(s)
Adobe Acrobat PDF (33 kB)
2017-06-06
2017-06-06
8 Agent AuthorizationCover Letter(s)
Adobe Acrobat PDF (33 kB)
2017-06-06
2017-06-06
7 Updated signed Applicant C2PC Request LtrCover Letter(s)
Adobe Acrobat PDF (37 kB)
2013-05-14
2013-06-28
7 RF Expo Report 6 - AZ492FT4898 pt2RF Exposure Info
Adobe Acrobat PDF (3567 kB)
2013-04-01
2013-06-28
7 Updated User ManualUsers Manual
Adobe Acrobat PDF (115 kB)
2013-04-01
2013-06-28
7 Test Setup DescriptionTest Setup Photos
Adobe Acrobat PDF (55 kB)
2013-04-01
2013-06-28
7 System ConfigurationTest Setup Photos
Adobe Acrobat PDF (76 kB)
2013-04-01
2013-06-28
7 Updated RF Expo BookletUsers Manual
Adobe Acrobat PDF (374 kB)
2013-04-01
2013-06-28
7 RF Expo Report 5 - AZ492FT4898 pt1RF Exposure Info
Adobe Acrobat PDF (4605 kB)
2013-04-01
2013-06-28
7 RF Expo Report 4 - AZ492FT7035 pt1 (pt2 = TC 610473, RFx Rept 18)RF Exposure Info
Adobe Acrobat PDF (4413 kB)
2013-04-01
2013-06-28
7 RF Expo Report 3 - AZ492FT7048 pt1 (pt2 = TC 610473, RFx Rept 17)RF Exposure Info
Adobe Acrobat PDF (3567 kB)
2013-04-01
2013-06-28
7 RF Expo Report 2 - AZ492FT3821RF Exposure Info
Adobe Acrobat PDF (4411 kB)
2013-04-01
2013-06-28
7 RF Expo Report 1 - AZ492FT4897RF Exposure Info
Adobe Acrobat PDF (3567 kB)
2013-04-01
2013-06-28
7 Authority LetterCover Letter(s)
Adobe Acrobat PDF (32 kB)
2013-04-01
2013-06-28
7 Cover Letter UltraTechCover Letter(s)
Adobe Acrobat PDF (49 kB)
2013-04-01
2013-06-28
6 Updated User ManualUsers Manual
Adobe Acrobat PDF (115 kB)
2013-03-28
2013-03-28
6 Test Setup DescriptionTest Setup Photos
Adobe Acrobat PDF (55 kB)
2013-03-28
2013-03-28
6 System ConfigurationTest Setup Photos
Adobe Acrobat PDF (76 kB)
2013-03-28
2013-03-28
6 RF Expo BookletRF Exposure Info
Adobe Acrobat PDF (374 kB)
2013-03-28
2013-03-28
6 RF Expo Report 18RF Exposure Info
Adobe Acrobat PDF (1323 kB)
2013-03-28
2013-03-28
6 RF Expo Report 17RF Exposure Info
Adobe Acrobat PDF (1323 kB)
2013-03-28
2013-03-28
6 RF Expo Report 16RF Exposure Info
Adobe Acrobat PDF (1648 kB)
2013-03-28
2013-03-28
6 RF Expo Report 15RF Exposure Info
Adobe Acrobat PDF (1556 kB)
2013-03-28
2013-03-28
6 RF Expo Report 14RF Exposure Info
Adobe Acrobat PDF (1055 kB)
2013-03-28
2013-03-28
6 RF Expo Report 13RF Exposure Info
Adobe Acrobat PDF (1556 kB)
2013-03-28
2013-03-28
6 RF Expo Report 12RF Exposure Info
Adobe Acrobat PDF (1323 kB)
2013-03-28
2013-03-28
6 RF Expo Report 11RF Exposure Info
Adobe Acrobat PDF (1556 kB)
2013-03-28
2013-03-28
6 RF Expo Report 10RF Exposure Info
Adobe Acrobat PDF (1324 kB)
2013-03-28
2013-03-28
6 RF Expo Report 9RF Exposure Info
Adobe Acrobat PDF (1648 kB)
2013-03-28
2013-03-28
6 RF Expo Report 8RF Exposure Info
Adobe Acrobat PDF (1648 kB)
2013-03-28
2013-03-28
6 RF Expo Report 7RF Exposure Info
Adobe Acrobat PDF (1055 kB)
2013-03-28
2013-03-28
6 RF Expo Report 6RF Exposure Info
Adobe Acrobat PDF (1322 kB)
2013-03-28
2013-03-28
6 RF Expo Report 5RF Exposure Info
Adobe Acrobat PDF (1055 kB)
2013-03-28
2013-03-28
6 RF Expo Report 4RF Exposure Info
Adobe Acrobat PDF (1556 kB)
2013-03-28
2013-03-28
6 RF Expo Report 3RF Exposure Info
Adobe Acrobat PDF (1648 kB)
2013-03-28
2013-03-28
6 RF Expo Report 2RF Exposure Info
Adobe Acrobat PDF (1053 kB)
2013-03-28
2013-03-28
6 RF Expo Report 1RF Exposure Info
Adobe Acrobat PDF (1322 kB)
2013-03-28
2013-03-28
6 C2PC Request LetterCover Letter(s)
Adobe Acrobat PDF (31 kB)
2013-03-28
2013-03-28
6 Authority LetterCover Letter(s)
Adobe Acrobat PDF (32 kB)
2013-03-28
2013-03-28
6 Cover LetterCover Letter(s)
Adobe Acrobat PDF (49 kB)
2013-03-28
2013-03-28
5 revised rf exposure bookletUsers Manual
Adobe Acrobat PDF (102 kB)
2007-03-29
2007-03-26
5 users manualUsers Manual
Adobe Acrobat PDF (133 kB)
2007-03-26
2007-03-26
5 rf exposure bookletUsers Manual
Adobe Acrobat PDF (119 kB)
2007-03-26
2007-03-26
5 mpe report 3RF Exposure Info
Adobe Acrobat PDF (1178 kB)
2007-03-26
2007-03-26
5 mpe report 2RF Exposure Info
Adobe Acrobat PDF (1353 kB)
2007-03-26
2007-03-26
5 mpe report 1RF Exposure Info
Adobe Acrobat PDF (2865 kB)
2007-03-26
2007-03-26
5 cover letterCover Letter(s)
Adobe Acrobat PDF (73 kB)
2007-03-26
2007-03-26
5 systems configurationExternal Photos
JPEG Image (76 kB)
2007-03-26
2007-03-26
4 MPE REPORTRF Exposure Info
Adobe Acrobat PDF (1327 kB)
2005-12-19
2005-12-16
4 MPE CALCULATIONSRF Exposure Info
Adobe Acrobat PDF (151 kB)
2005-12-19
2005-12-16
4 SYSTEMS CONFIGURATIONExternal Photos
JPEG Image (76 kB)
2005-12-19
2005-12-16
4 CLASS II CHANGE LETTERCover Letter(s)
Adobe Acrobat PDF (72 kB)
2005-12-19
2005-12-16
4 USERS MANUALUsers Manual
Adobe Acrobat PDF (124 kB)
2005-12-19
2005-12-16
3 MPE annex DRF Exposure Info
Adobe Acrobat PDF (129 kB)
2005-11-22
2005-10-28
3 response to RT 24749Cover Letter(s)
Microsoft Word (84 kB)
2005-11-22
2005-10-28
3 mpe reportRF Exposure Info
Adobe Acrobat PDF (893 kB)
2005-11-01
2005-10-28
3 users manualUsers Manual
Adobe Acrobat PDF (273 kB)
2005-11-01
2005-10-28
3 request for class II changeCover Letter(s)
Microsoft Word (92 kB)
2005-11-01
2005-10-28
3 system configurationExternal Photos
JPEG Image (76 kB)
2005-11-01
2005-10-28
3 block diagramBlock Diagram
Adobe Acrobat PDF (12 kB)
2005-11-01
2005-10-28
2 class II change request letterCover Letter(s)
Adobe Acrobat PDF (72 kB)
2005-09-07
1 users manualUsers Manual
Adobe Acrobat PDF (115 kB)
2005-08-08
2005-07-11
1 ATTESTATION PART 90Attestation Statements
Adobe Acrobat PDF (46 kB)
2005-07-11
2005-07-11
1 RFO OCCUPATIONAL LABELID Label/Location Info
Adobe Acrobat PDF (39 kB)
2005-07-11
2005-07-11
1 RF EXPOSURE INFORF Exposure Info
Adobe Acrobat PDF (29 kB)
2005-07-11
2005-07-11
1 CONFIDENTILITY LETTERCover Letter(s)
Adobe Acrobat PDF (27 kB)
2005-07-11
2005-07-11
1 TEST SETUP PHOTOSTest Setup Photos
Adobe Acrobat PDF (179 kB)
2005-07-11
2005-07-11
1 TEST REPORTTest Report
Adobe Acrobat PDF (1231 kB)
2005-07-11
2005-07-11
1 INTERNAL PHOTOSInternal Photos
Adobe Acrobat PDF (1821 kB)
2005-07-11
2005-07-11
1 ID LABEL AND LOCATIONID Label/Location Info
Adobe Acrobat PDF (42 kB)
2005-07-11
2005-07-11
1 EXTERNAL PHOTOExternal Photos
Adobe Acrobat PDF (130 kB)
2005-07-11
2005-07-11

APP # 11 (2019-01-03)

App # Document Type Submitted
Available
11 Installation Manual Users Manual
Adobe Acrobat PDF (3204 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 RF Safety Booklet Users Manual
Adobe Acrobat PDF (885 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 RF Exposure Training and Product Safety Information Users Manual
Adobe Acrobat PDF (274 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 User Manual Users Manual
Adobe Acrobat PDF (185 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 AN000131A01 All Band Validation RF Exposure Info
Adobe Acrobat PDF (551 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 SAR Report Appendix B RF Exposure Info
Adobe Acrobat PDF (1152 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 SAR Report Appendix A RF Exposure Info
Adobe Acrobat PDF (1531 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 SAR Report RF Exposure Info
Adobe Acrobat PDF (616 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 MPE Assessment 3 of 3 RF Exposure Info
Adobe Acrobat PDF (1114 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 MPE Assessment 2 of 3 RF Exposure Info
Adobe Acrobat PDF (1753 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 MPE Assessment 1 of 3 RF Exposure Info
Adobe Acrobat PDF (2699 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 System Configuration External Photos
Adobe Acrobat PDF (103 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 Cover Letter Cover Letter(s)
Adobe Acrobat PDF (66 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 C2PC Cover Letter(s)
Adobe Acrobat PDF (37 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 Agent Authorization Cover Letter(s)
Adobe Acrobat PDF (33 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00
11 Manufacturer Attestation Cover Letter(s)
Adobe Acrobat PDF (36 kB)
2018-12-10 00:00:00
2019-01-03 00:00:00

APP # 10 (2018-10-26)

App # Document Type Submitted
Available
10 Test Setup Test Setup Photos
Adobe Acrobat PDF (244 kB)
2018-10-26 00:00:00
2018-10-26 00:00:00
10 Test Report Test Report
Adobe Acrobat PDF (761 kB)
2018-10-26 00:00:00
2018-10-26 00:00:00
10 Internal Photos Internal Photos
Adobe Acrobat PDF (3051 kB)
2018-10-26 00:00:00
2018-10-26 00:00:00
10 Cover Letter Cover Letter(s)
Adobe Acrobat PDF (67 kB)
2018-10-26 00:00:00
2018-10-26 00:00:00
10 Confidentiality Request Cover Letter(s)
Adobe Acrobat PDF (33 kB)
2018-10-26 00:00:00
2018-10-26 00:00:00
10 C2PC Request Cover Letter(s)
Adobe Acrobat PDF (35 kB)
2018-10-26 00:00:00
2018-10-26 00:00:00
10 Agent Authorization Cover Letter(s)
Adobe Acrobat PDF (33 kB)
2018-10-26 00:00:00
2018-10-26 00:00:00

APP # 9 (2018-03-20)

App # Document Type Submitted
Available
9 Confidential Request Cover Letter(s)
Adobe Acrobat PDF (33 kB)
2018-03-20 00:00:00
2018-03-20 00:00:00
9 RF Safety Booklet Revised Users Manual
Adobe Acrobat PDF (725 kB)
2018-03-20 00:00:00
2018-03-20 00:00:00
9 User Manual Revised Users Manual
Adobe Acrobat PDF (185 kB)
2018-03-20 00:00:00
2018-03-20 00:00:00
9 C2PC Request Revised Cover Letter(s)
Adobe Acrobat PDF (37 kB)
2018-03-20 00:00:00
2018-03-20 00:00:00
9 Cover Letter Revised Cover Letter(s)
Adobe Acrobat PDF (53 kB)
2018-03-20 00:00:00
2018-03-20 00:00:00
9 SAR Report Revised RF Exposure Info
Adobe Acrobat PDF (418 kB)
2018-03-20 00:00:00
2018-03-20 00:00:00
9 SAR Report Appendix B Revised RF Exposure Info
Adobe Acrobat PDF (1146 kB)
2018-03-20 00:00:00
2018-03-20 00:00:00
9 SAR Report Appendix A Revised RF Exposure Info
Adobe Acrobat PDF (1531 kB)
2018-03-20 00:00:00
2018-03-20 00:00:00
9 MPE Assessment 3 of 3 Revised RF Exposure Info
Adobe Acrobat PDF (856 kB)
2018-03-20 00:00:00
2018-03-20 00:00:00
9 MPE Assessment 2 of 3 Revised RF Exposure Info
Adobe Acrobat PDF (1520 kB)
2018-03-20 00:00:00
2018-03-20 00:00:00
9 Trimmable Antenna Users Manual
Adobe Acrobat PDF (3204 kB)
2018-03-20 00:00:00
2018-03-20 00:00:00
9 MPE Assessment 1 of 3 Revised RF Exposure Info
Adobe Acrobat PDF (1803 kB)
2018-03-20 00:00:00
2018-03-20 00:00:00
9 RF Safety Booklet Users Manual
Adobe Acrobat PDF (713 kB)
2017-06-27 00:00:00
2018-03-20 00:00:00
9 User Manual Users Manual
Adobe Acrobat PDF (149 kB)
2017-06-27 00:00:00
2018-03-20 00:00:00
9 SAR Report - Appendix B RF Exposure Info
Adobe Acrobat PDF (4901 kB)
2017-06-27 00:00:00
2018-03-20 00:00:00
9 SAR Report - Appendix A RF Exposure Info
Adobe Acrobat PDF (1799 kB)
2017-06-27 00:00:00
2018-03-20 00:00:00
9 SAR Report RF Exposure Info
Adobe Acrobat PDF (453 kB)
2017-06-27 00:00:00
2018-03-20 00:00:00
9 MPE Assessment 3 of 3 RF Exposure Info
Adobe Acrobat PDF (941 kB)
2017-06-27 00:00:00
2018-03-20 00:00:00
9 MPE Assessment 2 of 3 RF Exposure Info
Adobe Acrobat PDF (1582 kB)
2017-06-27 00:00:00
2018-03-20 00:00:00
9 MPE Assessment 1 of 3 RF Exposure Info
Adobe Acrobat PDF (1954 kB)
2017-06-27 00:00:00
2018-03-20 00:00:00
9 System Configuration External Photos
Adobe Acrobat PDF (103 kB)
2017-06-27 00:00:00
2018-03-20 00:00:00
9 Cover Letter Cover Letter(s)
Adobe Acrobat PDF (52 kB)
2017-06-27 00:00:00
2018-03-20 00:00:00
9 C2PC Request Cover Letter(s)
Adobe Acrobat PDF (37 kB)
2017-06-27 00:00:00
2018-03-20 00:00:00
9 Agent Authorization Cover Letter(s)
Adobe Acrobat PDF (33 kB)
2017-06-27 00:00:00
2018-03-20 00:00:00

APP # 8 (2017-06-06)

App # Document Type Submitted
Available
8 RF Safety Booklet Users Manual
Adobe Acrobat PDF (514 kB)
2017-06-06 00:00:00
2017-06-06 00:00:00
8 User Manual Users Manual
Adobe Acrobat PDF (149 kB)
2017-06-06 00:00:00
2017-06-06 00:00:00
8 MPE Assessment 3 of 3 RF Exposure Info
Adobe Acrobat PDF (350 kB)
2017-06-06 00:00:00
2017-06-06 00:00:00
8 MPE Assessment 2 of 3 RF Exposure Info
Adobe Acrobat PDF (461 kB)
2017-06-06 00:00:00
2017-06-06 00:00:00
8 MPE Assessment 1 of 3 RF Exposure Info
Adobe Acrobat PDF (1630 kB)
2017-06-06 00:00:00
2017-06-06 00:00:00
8 External Photo of System Configuration External Photos
Adobe Acrobat PDF (103 kB)
2017-06-06 00:00:00
2017-06-06 00:00:00
8 Cover Letter Cover Letter(s)
Adobe Acrobat PDF (53 kB)
2017-06-06 00:00:00
2017-06-06 00:00:00
8 C2PC Request 2 Cover Letter(s)
Adobe Acrobat PDF (37 kB)
2017-06-06 00:00:00
2017-06-06 00:00:00
8 C2PC Request 1 Cover Letter(s)
Adobe Acrobat PDF (33 kB)
2017-06-06 00:00:00
2017-06-06 00:00:00
8 Agent Authorization Cover Letter(s)
Adobe Acrobat PDF (33 kB)
2017-06-06 00:00:00
2017-06-06 00:00:00

APP # 7 (2013-06-28)

App # Document Type Submitted
Available
7 Updated signed Applicant C2PC Request Ltr Cover Letter(s)
Adobe Acrobat PDF (37 kB)
2013-05-14 00:00:00
2013-06-28 00:00:00
7 RF Expo Report 6 - AZ492FT4898 pt2 RF Exposure Info
Adobe Acrobat PDF (3567 kB)
2013-04-01 00:00:00
2013-06-28 00:00:00
7 Updated User Manual Users Manual
Adobe Acrobat PDF (115 kB)
2013-04-01 00:00:00
2013-06-28 00:00:00
7 Test Setup Description Test Setup Photos
Adobe Acrobat PDF (55 kB)
2013-04-01 00:00:00
2013-06-28 00:00:00
7 System Configuration Test Setup Photos
Adobe Acrobat PDF (76 kB)
2013-04-01 00:00:00
2013-06-28 00:00:00
7 Updated RF Expo Booklet Users Manual
Adobe Acrobat PDF (374 kB)
2013-04-01 00:00:00
2013-06-28 00:00:00
7 RF Expo Report 5 - AZ492FT4898 pt1 RF Exposure Info
Adobe Acrobat PDF (4605 kB)
2013-04-01 00:00:00
2013-06-28 00:00:00
7 RF Expo Report 4 - AZ492FT7035 pt1 (pt2 = TC 610473, RFx Rept 18) RF Exposure Info
Adobe Acrobat PDF (4413 kB)
2013-04-01 00:00:00
2013-06-28 00:00:00
7 RF Expo Report 3 - AZ492FT7048 pt1 (pt2 = TC 610473, RFx Rept 17) RF Exposure Info
Adobe Acrobat PDF (3567 kB)
2013-04-01 00:00:00
2013-06-28 00:00:00
7 RF Expo Report 2 - AZ492FT3821 RF Exposure Info
Adobe Acrobat PDF (4411 kB)
2013-04-01 00:00:00
2013-06-28 00:00:00
7 RF Expo Report 1 - AZ492FT4897 RF Exposure Info
Adobe Acrobat PDF (3567 kB)
2013-04-01 00:00:00
2013-06-28 00:00:00
7 Authority Letter Cover Letter(s)
Adobe Acrobat PDF (32 kB)
2013-04-01 00:00:00
2013-06-28 00:00:00
7 Cover Letter UltraTech Cover Letter(s)
Adobe Acrobat PDF (49 kB)
2013-04-01 00:00:00
2013-06-28 00:00:00

APP # 6 (2013-03-28)

App # Document Type Submitted
Available
6 Updated User Manual Users Manual
Adobe Acrobat PDF (115 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 Test Setup Description Test Setup Photos
Adobe Acrobat PDF (55 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 System Configuration Test Setup Photos
Adobe Acrobat PDF (76 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Booklet RF Exposure Info
Adobe Acrobat PDF (374 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 18 RF Exposure Info
Adobe Acrobat PDF (1323 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 17 RF Exposure Info
Adobe Acrobat PDF (1323 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 16 RF Exposure Info
Adobe Acrobat PDF (1648 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 15 RF Exposure Info
Adobe Acrobat PDF (1556 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 14 RF Exposure Info
Adobe Acrobat PDF (1055 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 13 RF Exposure Info
Adobe Acrobat PDF (1556 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 12 RF Exposure Info
Adobe Acrobat PDF (1323 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 11 RF Exposure Info
Adobe Acrobat PDF (1556 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 10 RF Exposure Info
Adobe Acrobat PDF (1324 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 9 RF Exposure Info
Adobe Acrobat PDF (1648 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 8 RF Exposure Info
Adobe Acrobat PDF (1648 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 7 RF Exposure Info
Adobe Acrobat PDF (1055 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 6 RF Exposure Info
Adobe Acrobat PDF (1322 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 5 RF Exposure Info
Adobe Acrobat PDF (1055 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 4 RF Exposure Info
Adobe Acrobat PDF (1556 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 3 RF Exposure Info
Adobe Acrobat PDF (1648 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 2 RF Exposure Info
Adobe Acrobat PDF (1053 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 RF Expo Report 1 RF Exposure Info
Adobe Acrobat PDF (1322 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 C2PC Request Letter Cover Letter(s)
Adobe Acrobat PDF (31 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 Authority Letter Cover Letter(s)
Adobe Acrobat PDF (32 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00
6 Cover Letter Cover Letter(s)
Adobe Acrobat PDF (49 kB)
2013-03-28 00:00:00
2013-03-28 00:00:00

APP # 5 (2007-03-26)

App # Document Type Submitted
Available
5 revised rf exposure booklet Users Manual
Adobe Acrobat PDF (102 kB)
2007-03-29 00:00:00
2007-03-26 00:00:00
5 users manual Users Manual
Adobe Acrobat PDF (133 kB)
2007-03-26 00:00:00
2007-03-26 00:00:00
5 rf exposure booklet Users Manual
Adobe Acrobat PDF (119 kB)
2007-03-26 00:00:00
2007-03-26 00:00:00
5 mpe report 3 RF Exposure Info
Adobe Acrobat PDF (1178 kB)
2007-03-26 00:00:00
2007-03-26 00:00:00
5 mpe report 2 RF Exposure Info
Adobe Acrobat PDF (1353 kB)
2007-03-26 00:00:00
2007-03-26 00:00:00
5 mpe report 1 RF Exposure Info
Adobe Acrobat PDF (2865 kB)
2007-03-26 00:00:00
2007-03-26 00:00:00
5 cover letter Cover Letter(s)
Adobe Acrobat PDF (73 kB)
2007-03-26 00:00:00
2007-03-26 00:00:00
5 systems configuration External Photos
JPEG Image (76 kB)
2007-03-26 00:00:00
2007-03-26 00:00:00

APP # 4 (2005-12-16)

App # Document Type Submitted
Available
4 MPE REPORT RF Exposure Info
Adobe Acrobat PDF (1327 kB)
2005-12-19 00:00:00
2005-12-16 00:00:00
4 MPE CALCULATIONS RF Exposure Info
Adobe Acrobat PDF (151 kB)
2005-12-19 00:00:00
2005-12-16 00:00:00
4 SYSTEMS CONFIGURATION External Photos
JPEG Image (76 kB)
2005-12-19 00:00:00
2005-12-16 00:00:00
4 CLASS II CHANGE LETTER Cover Letter(s)
Adobe Acrobat PDF (72 kB)
2005-12-19 00:00:00
2005-12-16 00:00:00
4 USERS MANUAL Users Manual
Adobe Acrobat PDF (124 kB)
2005-12-19 00:00:00
2005-12-16 00:00:00

APP # 3 (2005-10-28)

App # Document Type Submitted
Available
3 MPE annex D RF Exposure Info
Adobe Acrobat PDF (129 kB)
2005-11-22 00:00:00
2005-10-28 00:00:00
3 response to RT 24749 Cover Letter(s)
Microsoft Word (84 kB)
2005-11-22 00:00:00
2005-10-28 00:00:00
3 mpe report RF Exposure Info
Adobe Acrobat PDF (893 kB)
2005-11-01 00:00:00
2005-10-28 00:00:00
3 users manual Users Manual
Adobe Acrobat PDF (273 kB)
2005-11-01 00:00:00
2005-10-28 00:00:00
3 request for class II change Cover Letter(s)
Microsoft Word (92 kB)
2005-11-01 00:00:00
2005-10-28 00:00:00
3 system configuration External Photos
JPEG Image (76 kB)
2005-11-01 00:00:00
2005-10-28 00:00:00
3 block diagram Block Diagram
Adobe Acrobat PDF (12 kB)
2005-11-01 00:00:00
2005-10-28 00:00:00

APP # 2 (2005-10-06)

App # Document Type Submitted
Available
2 class II change request letter Cover Letter(s)
Adobe Acrobat PDF (72 kB)
2005-09-07 00:00:00
N/A

APP # 1 (2005-07-11)

App # Document Type Submitted
Available
1 users manual Users Manual
Adobe Acrobat PDF (115 kB)
2005-08-08 00:00:00
2005-07-11 00:00:00
1 ATTESTATION PART 90 Attestation Statements
Adobe Acrobat PDF (46 kB)
2005-07-11 00:00:00
2005-07-11 00:00:00
1 RFO OCCUPATIONAL LABEL ID Label/Location Info
Adobe Acrobat PDF (39 kB)
2005-07-11 00:00:00
2005-07-11 00:00:00
1 RF EXPOSURE INFO RF Exposure Info
Adobe Acrobat PDF (29 kB)
2005-07-11 00:00:00
2005-07-11 00:00:00
1 CONFIDENTILITY LETTER Cover Letter(s)
Adobe Acrobat PDF (27 kB)
2005-07-11 00:00:00
2005-07-11 00:00:00
1 TEST SETUP PHOTOS Test Setup Photos
Adobe Acrobat PDF (179 kB)
2005-07-11 00:00:00
2005-07-11 00:00:00
1 TEST REPORT Test Report
Adobe Acrobat PDF (1231 kB)
2005-07-11 00:00:00
2005-07-11 00:00:00
1 INTERNAL PHOTOS Internal Photos
Adobe Acrobat PDF (1821 kB)
2005-07-11 00:00:00
2005-07-11 00:00:00
1 ID LABEL AND LOCATION ID Label/Location Info
Adobe Acrobat PDF (42 kB)
2005-07-11 00:00:00
2005-07-11 00:00:00
1 EXTERNAL PHOTO External Photos
Adobe Acrobat PDF (130 kB)
2005-07-11 00:00:00
2005-07-11 00:00:00

APP # 10 (2018-10-26)

App # Document Type Submitted
Available
10 Schematics Schematics
Adobe Acrobat PDF (39 kB)
2018-10-26 00:00:00
N/A

APP # 1 (2005-07-11)

App # Document Type Submitted
Available
1 USERS MANUAL Users Manual
Adobe Acrobat PDF (84 kB)
2005-08-04 00:00:00
2005-07-11 00:00:00
1 PARTS LIST Parts List/Tune Up Info
Adobe Acrobat PDF (38 kB)
2005-07-11 00:00:00
N/A

APP # 9 (2018-03-20)

App # Document Type Submitted
Available
9 Response to FCC Inquiry Operational Description
Adobe Acrobat PDF (131 kB)
2018-03-20 00:00:00
N/A

APP # 1 (2005-07-11)

App # Document Type Submitted
Available
1 BLOCK DIAGRAM Block Diagram
Adobe Acrobat PDF (16 kB)
2005-07-11 00:00:00
N/A

APP # 2 (2005-10-06)

App # Document Type Submitted
Available
2 users manual Users Manual
Adobe Acrobat PDF (126 kB)
2005-09-07 00:00:00
N/A

APP # 10 (2018-10-26)

App # Document Type Submitted
Available
10 Parts List Parts List/Tune Up Info
Adobe Acrobat PDF (34 kB)
2018-10-26 00:00:00
N/A

APP # 1 (2005-07-11)

App # Document Type Submitted
Available
1 USER MANUAL Users Manual
Adobe Acrobat PDF (84 kB)
2005-07-11 00:00:00
2005-07-11 00:00:00
1 OPERATIONAL DESCRIPTION Operational Description
Adobe Acrobat PDF (38 kB)
2005-07-11 00:00:00
N/A

APP # 7 (2013-06-28)

App # Document Type Submitted
Available
7 Applicant signed C2PC Request Ltr Cover Letter(s)
Adobe Acrobat PDF (37 kB)
2013-04-04 00:00:00
2013-06-28 00:00:00

APP # 2 (2005-10-06)

App # Document Type Submitted
Available
2 MPE report RF Exposure Info
Adobe Acrobat PDF (854 kB)
2005-09-07 00:00:00
N/A

APP # 1 (2005-07-11)

App # Document Type Submitted
Available
1 TUNE UP PROCEDURE Parts List/Tune Up Info
Adobe Acrobat PDF (78 kB)
2005-07-11 00:00:00
N/A

APP # 7 (2013-06-28)

App # Document Type Submitted
Available
7 C2PC Request Letter Cover Letter(s)
Adobe Acrobat PDF (32 kB)
2013-04-01 00:00:00
2013-06-28 00:00:00

APP # 1 (2005-07-11)

App # Document Type Submitted
Available
1 SCHEMATICS Schematics
Adobe Acrobat PDF (91 kB)
2005-07-11 00:00:00
N/A

Correspondence

APP # 7 (2013-06-28)

App # Document Type
7 [Re-Sent]E-Mail generated [Apr 2 2013] 2013-04-16 08:03:14
7 Incoming Correspondence generated [Apr 4 2013] 2013-04-16 08:08:01
7    Incoming Correspondence generated [May 14 2013] 2013-05-14 10:54:44
oeteascv

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Futurecom Systems Group ULC.
FCC Registration Number (FRN): 0009192436
Alphanumeric FCC ID: LO6DVRS700
Unique Application Identifier: eevhU6AbN4sR/iNnlx0jxw==
Line one: 3277 Langstaff Road
City: Concord Ontario
State: N/A
Country: Canada
Zip Code: L4K 5P8

TCB Information
TCB Application Email Address: tei@timcoengr.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: LO6
Product Code: -DVRS700

Person at the applicant's address to receive grant or for contact
Name: Tony Bombera
Title: P. Engineer
Telephone Number: 905-660-5548 Extension:
Fax Number: 905-660-1380
Email: tonyb@futurecom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): MOBEXCOM DVR VEHICULAR REPEATER

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UltraTech Engineering Labs Inc.
First Name:   Tri
Last Name:   Luu
Telephone Number: 877-747-6381 Extension:
Fax Number:  905-829-8050
E-mail:  tri@ultratech-labs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 73cm from all persons and must not exceed an antenna gain of 0 dBd.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  TONY BOMBERA
Title of authorized signature:  SR. ENGINEER

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Futurecom Systems Group ULC.
FCC Registration Number (FRN): 0009192436
Alphanumeric FCC ID: LO6DVRS700
Unique Application Identifier: l7WI7AyD2RGqZ7N7TZPjeg==
Line one: 3277 Langstaff Road
City: Concord Ontario
State: N/A
Country: Canada
Zip Code: L4K 5P8

TCB Information
TCB Application Email Address: tei@timcoengr.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: LO6
Product Code: -DVRS700

Person at the applicant's address to receive grant or for contact
Name: Tony Bombera
Title: P. Engineer
Telephone Number: 905-660-5548 Extension:
Fax Number: 905-660-1380
Email: tonyb@futurecom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): MOBEXCOM DVR Vehicular Repeater

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UltraTech Engineering Labs Inc.
First Name:   Tri
Last Name:   Luu
Telephone Number: 877-747-6381 Extension:
Fax Number:  905-829-8050
E-mail:  tri@ultratech-labs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Reissued by FCC
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Mike Wyrzykowski
Title of authorized signature:  Chairman & CEO

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Futurecom Systems Group ULC.
FCC Registration Number (FRN): 0009192436
Alphanumeric FCC ID: LO6DVRS700
Unique Application Identifier: mSH3TkSM13Hxg1oU/Zpcog==
Line one: 3277 Langstaff Road
City: Concord Ontario
State: N/A
Country: Canada
Zip Code: L4K 5P8

TCB Information
TCB Application Email Address: tei@timcoengr.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: LO6
Product Code: -DVRS700

Person at the applicant's address to receive grant or for contact
Name: Tony Bombera
Title: P. Engineer
Telephone Number: 905-660-5548 Extension:
Fax Number: 905-660-1380
Email: tonyb@futurecom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): MOBEXCOM DVR Vehicular Repeater

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UltraTech Engineering Labs Inc.
First Name:   Tri
Last Name:   Luu
Telephone Number: 877-747-6381 Extension:
Fax Number:  905-829-8050
E-mail:  tri@ultratech-labs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 73cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for specific transmitter and collocated conditions for operation with FCC ID AZ492FT3808 was evaluated for passengers and bystanders configurations as shown in this class 2 permissive change filing and requires a separation distance of at least 90cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Mike Wyrzykowski
Title of authorized signature:  Chairman & CEO

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Futurecom Systems Group ULC.
FCC Registration Number (FRN): 0009192436
Alphanumeric FCC ID: LO6DVRS700
Unique Application Identifier: RZWHqiXxSbriZ5NxoibOQw==
Line one: 3277 Langstaff Road
City: Concord Ontario
State: N/A
Country: Canada
Zip Code: L4K 5P8

TCB Information
TCB Application Email Address: TEI@TIMCOENGR.COM
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: LO6
Product Code: -DVRS700

Person at the applicant's address to receive grant or for contact
Name: Tony Bombera
Title: P. Engineer
Telephone Number: 905-660-5548 Extension:
Fax Number: 905-660-1380
Email: tonyb@futurecom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): MOBEXCOM DVR VEHICULAR REPEATER

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UltraTech Engineering Labs Inc.
First Name:   Tri
Last Name:   Luu
Telephone Number: 877-747-6381 Extension:
Fax Number:  905-829-8050
E-mail:  tri@ultratech-labs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 73cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for specific transmitters and collocated conditions for operation with FCC ID AZ492FT3808 and FCCID AZ492FT3806 was evaluated for passengers and bystanders configurations as shown in this class 2 permissive change filing and requires a separation distance of at least 90cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%. When using a 1/4 ë mobile antenna, the mobile power must be limited to 57 W, and the DVRS is limited to 5 W conducted power into DVRS antenna.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  MIKE WYRZYKOWSKI
Title of authorized signature:  CHAIRMAN & CEO

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Futurecom Systems Group ULC.
FCC Registration Number (FRN): 0009192436
Alphanumeric FCC ID: LO6DVRS700
Unique Application Identifier: qFnGRp4Gs5XWj4xy8qssHA==
Line one: 3277 Langstaff Road
City: Concord Ontario
State: N/A
Country: Canada
Zip Code: L4K 5P8

TCB Information
TCB Application Email Address: TEI@TIMCOENGR.COM
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: LO6
Product Code: -DVRS700

Person at the applicant's address to receive grant or for contact
Name: Tony Bombera
Title: P. Engineer
Telephone Number: 905-660-5548 Extension:
Fax Number: 905-660-1380
Email: tonyb@futurecom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): MOBEXCOM DVR Digital Vehicular Repeater

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UltraTech Engineering Labs Inc.
First Name:   Tri
Last Name:   Luu
Telephone Number: 877-747-6381 Extension:
Fax Number:  905-829-8050
E-mail:  tri@ultratech-labs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 73cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for specific transmitters and co-located conditions for operation with FCCID AZ492FT4870, FCCID AZ492FT4862, FCCID AZ492FT4867, and FCCID AZ492FT5823 was evaluated for passengers and bystanders configurations as shown in this class 2 permissive change filing and requires a separation distance of at least 90cm from the vehicle body and a maximum conducted output power of 5W. This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50% and a maximum output power of 35W, 100W, 40W, and respectively for FCCID AZ492FT5823, FCCID AZ492FT4870, and FCCID AZ492FT4862.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Tony Bombera
Title of authorized signature:  Sr. Engineer

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Futurecom Systems Group ULC.
FCC Registration Number (FRN): 0009192436
Alphanumeric FCC ID: LO6DVRS700
Unique Application Identifier: fth+CjwnEsAvck09dl1xnA==
Line one: 3277 Langstaff Road
City: Concord Ontario
State: N/A
Country: Canada
Zip Code: L4K 5P8

TCB Information
TCB Application Email Address: vic@ultratech-labs.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: LO6
Product Code: -DVRS700

Person at the applicant's address to receive grant or for contact
Name: Tony Bombera
Title: P. Engineer
Telephone Number: 905-660-5548 Extension:
Fax Number: 905-660-1380
Email: tonyb@futurecom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): MOBEXCOM DVR Vehicular Repeater

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UltraTech Engineering Labs Inc.
First Name:   Dharmajit
Last Name:   Solanki
Telephone Number: 905-829-1570 Extension:
Fax Number:  905-829-8050
E-mail:  dharmajit@ultratech-labs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 73cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for specific transmitters and co-located conditions for operation with FCCID AZ492FT4870, FCCID AZ492FT4862, FCCID AZ492FT4867, and FCCID AZ492FT5823 was evaluated for passengers and bystanders configurations as shown in this class 2 permissive change filing and requires a separation distance of at least 90cm from the vehicle body and a maximum conducted output power of 5W. This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50% and a maximum output power of 35W, 100W, 40W, and respectively for FCCID AZ492FT5823, FCCID AZ492FT4870, and FCCID AZ492FT4862. Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the User’s manuel and MPE test reports, when Mobexcom DVR 700, Motorola VHF, UHF, 700MHz and 800MHz Digital Mobile radios and specific antennas as a package. The Mobile radios tested for this submission are authorized under FCC ID: AZ492FT3824, AZ492FT5858, Z492FT3821, AZ492FT4894, AZ492FT4897, AZ492FT4896, AZ492FT7037, AZ492FT7035, AZ492FT7043, AZ492FT7048, AZ492FT7044, AZ492FT4895, AZ492FT4898, AZ492FT7047 and AZ492FT4904.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Dharmajit SOlanki
Title of authorized signature:  Authorized Agent

Complete items below if agent signs the application:

Firm Name:  UltraTech Engineering Labs Inc.
Name:  Dharmajit Dharmajit Dharmajit
Line 1:  Dharmajit
Line 2:  Dharmajit
P.O. Box:  Dharmajit
City:  Dharmajit
State:  Dharmajit
Country:  Dharmajit
Zip Code:  Dharmajit
Telephone Number:  9058291570
Fax Number:  9058298050
E-mail:  dharmajit@ultratech-labs.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Futurecom Systems Group ULC.
FCC Registration Number (FRN): 0009192436
Alphanumeric FCC ID: LO6DVRS700
Unique Application Identifier: lfuWKZqdxNFWrQniR1vVRA==
Line one: 3277 Langstaff Road
City: Concord Ontario
State: N/A
Country: Canada
Zip Code: L4K 5P8

TCB Information

FCC ID
Grantee Code: LO6
Product Code: -DVRS700

Person at the applicant's address to receive grant or for contact
Name: Tony Bombera
Title: P. Engineer
Telephone Number: 905-660-5548 Extension:
Fax Number: 905-660-1380
Email: tonyb@futurecom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): MOBEXCOM DVR Vehicular Repeater

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Motorola
First Name:   William
Last Name:   Elliott
Telephone Number: 954-723-5480 Extension:
Fax Number:  954-723-6383
E-mail:  FME001@motorolasolutions.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Dharmajit Solanki
Title of authorized signature:  Authorized Agent

Complete items below if agent signs the application:

Firm Name:  UltraTech Engineering Labs Inc.
Name:  Dharmajit Dharmajit Dharmajit
Line 1:  Dharmajit
Line 2:  Dharmajit
P.O. Box:  Dharmajit
City:  Dharmajit
State:  Dharmajit
Country:  Dharmajit
Zip Code:  Dharmajit
Telephone Number:  9058291570
Fax Number:  9058298050
E-mail:  dharmajit@ultratech-labs.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Futurecom Systems Group ULC.
FCC Registration Number (FRN): 0009192436
Alphanumeric FCC ID: LO6DVRS700
Unique Application Identifier: npuWDcW2+WwBJSAQzpshUg==
Line one: 3277 Langstaff Road
City: Concord Ontario
State: N/A
Country: Canada
Zip Code: L4K 5P8

TCB Information
TCB Application Email Address: vic@ultratech-labs.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: LO6
Product Code: -DVRS700

Person at the applicant's address to receive grant or for contact
Name: Tony Bombera
Title: P. Engineer
Telephone Number: 905-660-5548 Extension:
Fax Number: 905-660-1380
Email: tonyb@futurecom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): MOBEXCOM DVR Vehicular Repeater

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UltraTech Engineering Labs Inc.
First Name:   Tri
Last Name:   Luu
Telephone Number: 877-747-6381 Extension:
Fax Number:  905-829-8050
E-mail:  tri@ultratech-labs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID. Class II Permissive Change to add new emission designation 8K10F1E, and to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooh and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on Mobexom DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Dan Huynh
Title of authorized signature:  Authorized Agent

Complete items below if agent signs the application:

Firm Name:  UltraTech Engineering Labs Inc.
Name:  Dan Dan Dan
Line 1:  Dan
Line 2:  Dan
P.O. Box:  Dan
City:  Dan
State:  Dan
Country:  Dan
Zip Code:  Dan
Telephone Number:  905-829-1570
Fax Number:  905-829-8050
E-mail:  dan@ultratech-labs.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Futurecom Systems Group ULC.
FCC Registration Number (FRN): 0009192436
Alphanumeric FCC ID: LO6DVRS700
Unique Application Identifier: fIvovksnNKFHSNmLJkWY4w==
Line one: 3277 Langstaff Road
City: Concord Ontario
State: N/A
Country: Canada
Zip Code: L4K 5P8

TCB Information
TCB Application Email Address: vic@ultratech-labs.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 (all below 3 GHz)

FCC ID
Grantee Code: LO6
Product Code: -DVRS700

Person at the applicant's address to receive grant or for contact
Name: Tony Bombera
Title: P. Engineer
Telephone Number: 905-660-5548 Extension:
Fax Number: 905-660-1380
Email: tonyb@futurecom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): MOBEXCOM DVR Vehicular Repeater

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UltraTech Engineering Labs Inc
First Name:   Tri
Last Name:   Luu
Telephone Number: 905-829-1570 Extension:
Fax Number:  905-829-8050
E-mail:  tri@ultratech-labs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID. Class II Permissive Change to add new emission designation 8K10F1E, and to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooh and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on Mobexom DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089. Class II Permissive Change to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE and SAR test reports, when MOBEXCOM DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on MOBEXCOM DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Dan Huynh
Title of authorized signature:  Authorized Agent

Complete items below if agent signs the application:

Firm Name:  UltraTech Engineering Labs Inc.
Name:  Dan Dan Dan
Line 1:  Dan
Line 2:  Dan
P.O. Box:  Dan
City:  Dan
State:  Dan
Country:  Dan
Zip Code:  Dan
Telephone Number:  905-829-1570
Fax Number:  905-829-8050
E-mail:  danthuynh@gmail.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Futurecom Systems Group ULC.
FCC Registration Number (FRN): 0009192436
Alphanumeric FCC ID: LO6DVRS700
Unique Application Identifier: QcSvj01zww6I1OMKka+ULw==
Line one: 3277 Langstaff Road
City: Concord Ontario
State: N/A
Country: Canada
Zip Code: L4K 5P8

TCB Information
TCB Application Email Address: vic@ultratech-labs.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 (all below 3 GHz)

FCC ID
Grantee Code: LO6
Product Code: -DVRS700

Person at the applicant's address to receive grant or for contact
Name: Tony Bombera
Title: P. Engineer
Telephone Number: 905-660-5548 Extension:
Fax Number: 905-660-1380
Email: tonyb@futurecom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): MOBEXCOM DVR Vehicular Repeater

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UltraTech Engineering Labs Inc
First Name:   Tri
Last Name:   Luu
Telephone Number: 905-829-1570 Extension:
Fax Number:  905-829-8050
E-mail:  tri@ultratech-labs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID. Class II Permissive Change to add new emission designation 8K10F1E, and to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooh and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on Mobexom DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089. Class II Permissive Change to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE and SAR test reports, when MOBEXCOM DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on MOBEXCOM DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089. Class II Permissive Change for a change of RF transistor from a through hole package to a surface mount package.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Dan Huynh
Title of authorized signature:  Authorized Agent

Complete items below if agent signs the application:

Firm Name:  UltraTech Engineering Labs Inc
Name:  Dan Dan Dan
Line 1:  Dan
Line 2:  Dan
P.O. Box:  Dan
City:  Dan
State:  Dan
Country:  Dan
Zip Code:  Dan
Telephone Number:  905-829-1570
Fax Number:  905-829-8050
E-mail:  dan@ultratech-labs.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Futurecom Systems Group ULC.
FCC Registration Number (FRN): 0009192436
Alphanumeric FCC ID: LO6DVRS700
Unique Application Identifier: 3hERXIqfboRiLkmmJoQ2dg==
Line one: 3277 Langstaff Road
City: Concord Ontario
State: N/A
Country: Canada
Zip Code: L4K 5P8

TCB Information
TCB Application Email Address: vic@ultratech-labs.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 (all below 3 GHz)

FCC ID
Grantee Code: LO6
Product Code: -DVRS700

Person at the applicant's address to receive grant or for contact
Name: Tony Bombera
Title: P. Engineer
Telephone Number: 905-660-5548 Extension:
Fax Number: 905-660-1380
Email: tonyb@futurecom.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): MOBEXCOM DVR Vehicular Repeater

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UltraTech Engineering Labs Inc
First Name:   Tri
Last Name:   Luu
Telephone Number: 905-829-1570 Extension:
Fax Number:  905-829-8050
E-mail:  tri@ultratech-labs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID. Class II Permissive Change to add new emission designation 8K10F1E, and to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooh and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on Mobexom DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089. Class II Permissive Change to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE and SAR test reports, when MOBEXCOM DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on MOBEXCOM DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089. Class II Permissive Change for a change of RF transistor from a through hole package to a surface mount package. Class II permissive change to address RF exposure condition of MOBEXCOM DVRS 700 interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Dan Huynh
Title of authorized signature:  Authorized Agent

Complete items below if agent signs the application:

Firm Name:  UltraTech Engineering Labs Inc
Name:  Dan Dan Dan
Line 1:  Dan
Line 2:  Dan
P.O. Box:  Dan
City:  Dan
State:  Dan
Country:  Dan
Zip Code:  Dan
Telephone Number:  905-829-1570
Fax Number:  905-829-8050
E-mail:  dan@ultratech-labs.com

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada
Date of Grant: 01/03/2019

Application Dated: 12/10/2018
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 764.0  -  776.0 20.0 1.5  PM 8K10F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 8K10F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID.

Class II Permissive Change to add new emission designation 8K10F1E, and to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooh and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on Mobexom DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.

Class II Permissive Change to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE and SAR test reports, when MOBEXCOM DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on MOBEXCOM DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.

Class II Permissive Change for a change of RF transistor from a through hole package to a surface mount package.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS 700 interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
  Date of Grant: 01/03/2019

Application Dated: 12/10/2018
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 764.0  -  776.0 20.0 1.5  PM 8K10F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 8K10F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID.

Class II Permissive Change to add new emission designation 8K10F1E, and to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooh and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on Mobexom DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.

Class II Permissive Change to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE and SAR test reports, when MOBEXCOM DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on MOBEXCOM DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.

Class II Permissive Change for a change of RF transistor from a through hole package to a surface mount package.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS 700 interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA329857
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 07/11/2005

Application Dated: 07/11/2005
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR VEHICULAR REPEATER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 73cm from all persons and must not exceed an antenna gain of 0 dBd.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
>
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada
Date of Grant: 03/20/2018

Application Dated: 06/27/2017
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 764.0  -  776.0 20.0 1.5  PM 8K10F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 8K10F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID.

Class II Permissive Change to add new emission designation 8K10F1E, and to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooh and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on Mobexom DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.

Class II Permissive Change to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE and SAR test reports, when MOBEXCOM DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on MOBEXCOM DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
  Date of Grant: 03/20/2018

Application Dated: 06/27/2017
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 764.0  -  776.0 20.0 1.5  PM 8K10F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 8K10F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID.

Class II Permissive Change to add new emission designation 8K10F1E, and to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooh and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on Mobexom DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.

Class II Permissive Change to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE and SAR test reports, when MOBEXCOM DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on MOBEXCOM DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA137743
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada
Date of Grant: 03/28/2013

Application Dated: 03/28/2013
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 73cm from all persons and must not exceed an antenna gain of 0 dBd.

MPE compliance for specific transmitters and co-located conditions for operation with FCCID AZ492FT4870, FCCID AZ492FT4862, FCCID AZ492FT4867, and FCCID AZ492FT5823 was evaluated for passengers and bystanders configurations as shown in this class 2 permissive change filing and requires a separation distance of at least 90cm from the vehicle body and a maximum conducted output power of 5W.

This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50% and a maximum output power of 35W, 100W, 40W, and respectively for FCCID AZ492FT5823, FCCID AZ492FT4870, and FCCID AZ492FT4862.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the User’s manuel and MPE test reports, when Mobexcom DVR 700, Motorola VHF, UHF, 700MHz and 800MHz Digital Mobile radios and specific antennas as a package. The Mobile radios tested for this submission are authorized under FCC ID: AZ492FT3824, AZ492FT5858, Z492FT3821, AZ492FT4894, AZ492FT4897, AZ492FT4896, AZ492FT7037, AZ492FT7035, AZ492FT7043, AZ492FT7048, AZ492FT7044, AZ492FT4895, AZ492FT4898, AZ492FT7047 and AZ492FT4904.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
  Date of Grant: 03/28/2013

Application Dated: 03/28/2013
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 73cm from all persons and must not exceed an antenna gain of 0 dBd.

MPE compliance for specific transmitters and co-located conditions for operation with FCCID AZ492FT4870, FCCID AZ492FT4862, FCCID AZ492FT4867, and FCCID AZ492FT5823 was evaluated for passengers and bystanders configurations as shown in this class 2 permissive change filing and requires a separation distance of at least 90cm from the vehicle body and a maximum conducted output power of 5W.

This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50% and a maximum output power of 35W, 100W, 40W, and respectively for FCCID AZ492FT5823, FCCID AZ492FT4870, and FCCID AZ492FT4862.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the User’s manuel and MPE test reports, when Mobexcom DVR 700, Motorola VHF, UHF, 700MHz and 800MHz Digital Mobile radios and specific antennas as a package. The Mobile radios tested for this submission are authorized under FCC ID: AZ492FT3824, AZ492FT5858, Z492FT3821, AZ492FT4894, AZ492FT4897, AZ492FT4896, AZ492FT7037, AZ492FT7035, AZ492FT7043, AZ492FT7048, AZ492FT7044, AZ492FT4895, AZ492FT4898, AZ492FT7047 and AZ492FT4904.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA610473
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
  Date of Grant: 06/28/2013

Application Dated: 04/01/2013
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA292245
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 10/28/2005

Application Dated: 10/28/2005
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 73cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for specific transmitter and collocated conditions for operation with FCC ID AZ492FT3808 was evaluated for passengers and bystanders configurations as shown in this class 2 permissive change filing and requires a separation distance of at least 90cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
  Date of Grant: 10/28/2005

Application Dated: 10/28/2005
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 73cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for specific transmitter and collocated conditions for operation with FCC ID AZ492FT3808 was evaluated for passengers and bystanders configurations as shown in this class 2 permissive change filing and requires a separation distance of at least 90cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA188794
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada
Date of Grant: 06/06/2017

Application Dated: 06/06/2017
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 764.0  -  776.0 20.0 1.5  PM 8K10F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 8K10F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID.

Class II Permissive Change to add new emission designation 8K10F1E, and to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooh and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on Mobexom DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
  Date of Grant: 06/06/2017

Application Dated: 06/06/2017
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 764.0  -  776.0 20.0 1.5  PM 8K10F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 8K10F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID.

Class II Permissive Change to add new emission designation 8K10F1E, and to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooh and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on Mobexom DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA837487
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada
Date of Grant: 10/26/2018

Application Dated: 10/26/2018
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 764.0  -  776.0 20.0 1.5  PM 8K10F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 8K10F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID.

Class II Permissive Change to add new emission designation 8K10F1E, and to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooh and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on Mobexom DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.

Class II Permissive Change to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE and SAR test reports, when MOBEXCOM DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on MOBEXCOM DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.

Class II Permissive Change for a change of RF transistor from a through hole package to a surface mount package.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
  Date of Grant: 10/26/2018

Application Dated: 10/26/2018
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 764.0  -  776.0 20.0 1.5  PM 8K10F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 8K10F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter in standalone operations must be installed to provide a separation distance of at least 73 cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for passengers and bystanders for installation configurations and separation distances with the specific co-located transmitter FCC IDs (grantee AZ4) shown in filings under this FCC ID.

Class II Permissive Change to add new emission designation 8K10F1E, and to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooh and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on Mobexom DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.

Class II Permissive Change to certify minimum separation distances from the Car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE and SAR test reports, when MOBEXCOM DVRS 700 and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements were performed on MOBEXCOM DVR 700 and these mobile radio authorized under FCC ID: AZ492FT7089.

Class II Permissive Change for a change of RF transistor from a through hole package to a surface mount package.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA966302
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 03/26/2007

Application Dated: 03/26/2007
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Digital Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 73cm from all persons and must not exceed an antenna gain of 0 dBd.

MPE compliance for specific transmitters and co-located conditions for operation with FCCID AZ492FT4870, FCCID AZ492FT4862, FCCID AZ492FT4867, and FCCID AZ492FT5823 was evaluated for passengers and bystanders configurations as shown in this class 2 permissive change filing and requires a separation distance of at least 90cm from the vehicle body and a maximum conducted output power of 5W.

This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50% and a maximum output power of 35W, 100W, 40W, and respectively for FCCID AZ492FT5823, FCCID AZ492FT4870, and FCCID AZ492FT4862.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
>
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 12/16/2005

Application Dated: 12/16/2005
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR VEHICULAR REPEATER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 73cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for specific transmitters and collocated conditions for operation with FCC ID AZ492FT3808 and FCCID AZ492FT3806 was evaluated for passengers and bystanders configurations as shown in this class 2 permissive change filing and requires a separation distance of at least 90cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%. When using a 1/4 ë mobile antenna, the mobile power must be limited to 57 W, and the DVRS is limited to 5 W conducted power into DVRS antenna.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
  Date of Grant: 12/16/2005

Application Dated: 12/16/2005
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRS700
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR VEHICULAR REPEATER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 764.0  -  776.0 20.0 1.5  PM 11K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 16K0F3E
BC 90 764.0  -  776.0 20.0 1.5  PM 7K30F1E
BC 90 794.0  -  806.0 20.0 1.5  PM 11K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 16K0F3E
BC 90 794.0  -  806.0 20.0 1.5  PM 7K30F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 73cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for specific transmitters and collocated conditions for operation with FCC ID AZ492FT3808 and FCCID AZ492FT3806 was evaluated for passengers and bystanders configurations as shown in this class 2 permissive change filing and requires a separation distance of at least 90cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%. When using a 1/4 ë mobile antenna, the mobile power must be limited to 57 W, and the DVRS is limited to 5 W conducted power into DVRS antenna.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA886357

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details