1. FCC ID
  2. LO6
  3. LO6-DVRSUHF

FCC ID LO6-DVRSUHF

DVRS Vehicular Repeater

by Futurecom Systems Group ULC.

Grantee Code: LO6   Product Code: DVRSUHF
Latest application date: 2020-11-04

FCC ID Device Details

FCC IDLO6-DVRSUHF
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLO6
Product CodeDVRSUHF
Applicant BusinessFuturecom Systems Group ULC. 🇨🇦
Related Domains futurecom.com
Equipment ClassDVRS Vehicular Repeater
Test FirmUltraTech Engineering Labs Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
380-406 MHzClass II permissive change or modification of presently authorized equipment2020-11-04
380-406 MHzClass II permissive change or modification of presently authorized equipment2019-03-20
380-406 MHzClass II permissive change or modification of presently authorized equipment2019-01-03
380-406 MHzClass II permissive change or modification of presently authorized equipment2018-05-30
380-406 MHzClass II permissive change or modification of presently authorized equipment2018-04-24
380-406 MHzClass II permissive change or modification of presently authorized equipment2013-05-03
380-406 MHzClass II permissive change or modification of presently authorized equipment2008-06-19
380-512 MHzClass II permissive change or modification of presently authorized equipment2007-06-22
380-512 MHzClass II permissive change or modification of presently authorized equipment2007-04-12
380-512 MHzClass II permissive change or modification of presently authorized equipment2007-02-02
380-512 MHzClass II permissive change or modification of presently authorized equipment2007-01-03
380-512 MHzClass II permissive change or modification of presently authorized equipment2006-12-22
380-512 MHzClass II permissive change or modification of presently authorized equipment2006-06-07
403-512 MHzOriginal Equipment2004-12-15

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2020-11-04PDF 282.9 KB
Installation ManualUsers Manual2019-01-03PDF 3.1 MB
RF Safety BookletUsers Manual2019-01-03PDF 885.5 KB
User ManualUsers Manual2019-01-03PDF 185.4 KB
RF Safety BookletUsers Manual2018-05-30PDF 755.1 KB
Trimmable AntennaUsers Manual2018-05-30PDF 3.1 MB
User ManualUsers Manual2018-05-30PDF 185.4 KB
RF Safety BookletUsers Manual2018-04-24PDF 514.8 KB
RF Safety Booklet RevisedUsers Manual2018-04-24PDF 725 KB
User ManualUsers Manual2018-04-24PDF 149.4 KB
User Manual RevisedUsers Manual2018-04-24PDF 185.4 KB
Updated User ManualUsers Manual2013-05-03PDF 120.9 KB
Revised User ManualUsers Manual2008-06-19PDF 117.9 KB
RF Exposure BookletUsers Manual2007-06-22PDF 119.4 KB
Revised RF Expo BookletUsers Manual2007-06-22PDF 118.7 KB
User ManualUsers Manual2007-06-22PDF 133 KB
USERS MANUALUsers Manual2007-04-12PDF 133 KB
users manualUsers Manual2007-02-02PDF 133.1 KB
USERS MANUALUsers Manual2007-01-03PDF 133.1 KB
User ManualUsers Manual2006-12-22PDF 133.1 KB
installation/operating instructions- RF Exposure BookletUsers Manual2006-12-22PDF 118.9 KB
USERS MANUALUsers Manual2006-06-07PDF 118.4 KB
users manualUsers Manual2004-12-15PDF 201.3 KB
Internal Photos of changesInternal Photos2020-11-04PDF 395.9 KB
Internal photosInternal Photos2019-03-20PDF 883.3 KB
internal photosInternal Photos2004-12-15PDF 968.2 KB
External PhotosExternal Photos2020-11-04PDF 321.5 KB
System ConfigurationExternal Photos2019-01-03PDF 103.9 KB
Digital Vehicular Repeater System (DVRS)External Photos2018-05-30PDF 103.9 KB
System ConfigurationExternal Photos2018-04-24PDF 103.9 KB
System ConfigurationExternal Photos2013-05-03PDF 76.2 KB
EXTERNAL PHOTOSExternal Photos2007-04-12PDF 76.5 KB
system configurationExternal Photos2007-02-02PDF 76.5 KB
external photosExternal Photos2004-12-15PDF 65.3 KB
LabelID Label/Location Info2020-11-04PDF 298.4 KB
Label occupational warning Metadata onlyID Label/Location Info2004-12-15PDF 32.9 KB
label sample and locationID Label/Location Info2004-12-15PDF 34.6 KB
occupational warningID Label/Location Info2004-12-15PDF 46.5 KB
rf exposure label Metadata onlyID Label/Location Info2004-12-15PDF 57.5 KB
System ConfigurationBlock Diagram2007-06-22PDF 76.5 KB
Test Setup photosTest Setup Photos2020-11-04PDF 181.3 KB
Test setup photosTest Setup Photos2019-03-20PDF 103.8 KB
Test Setup DistanceTest Setup Photos2013-05-03PDF 55.5 KB
Test setupTest Setup Photos2007-06-22PDF 224.7 KB
System ConfigurationTest Setup Photos2006-12-22PDF 76.5 KB
Test Setup DiagramTest Setup Photos2006-12-22PDF 19.1 KB
TEST SET UP PHOTOTest Setup Photos2006-06-07PDF 234.3 KB
Test ReportTest Report2020-11-04PDF 342.3 KB
Test ReportTest Report2019-03-20PDF 811.1 KB
TEST REPORTTest Report2006-06-07PDF 607.5 KB
test reportTest Report2004-12-15PDF 1.2 MB
Manufacturer Attestation of operationAttestation Statements2020-11-04PDF 94 KB
Attestation of operationAttestation Statements2019-03-20PDF 22.3 KB
Manufacturer AttestationCover Letter(s)2019-01-03PDF 36.4 KB
Extended FreqquencyAttestation Statements2018-04-24PDF 22.5 KB
Freq Justification LetterAttestation Statements2013-05-03PDF 22.6 KB
Class II Permissive change letterCover Letter(s)2020-11-04PDF 59.7 KB
FCC Agent Authority LetterCover Letter(s)2020-11-04PDF 115.4 KB
cover letterCover Letter(s)2020-11-04PDF 116.4 KB
Agent Authority letterCover Letter(s)2019-03-20PDF 63.2 KB
C2PC letterCover Letter(s)2019-03-20PDF 18.3 KB
Confidentiality letterCover Letter(s)2019-03-20PDF 18.3 KB
Cover letterCover Letter(s)2019-03-20PDF 39.1 KB
Justification letter EFCover Letter(s)2019-03-20PDF 16.5 KB
Agent AuthorizationCover Letter(s)2019-01-03PDF 33.1 KB
C2PCCover Letter(s)2019-01-03PDF 37.5 KB
Cover LetterCover Letter(s)2019-01-03PDF 66.9 KB
Extended FrequenciesCover Letter(s)2019-01-03PDF 22.6 KB
Agent AuthorizationCover Letter(s)2018-05-30PDF 33 KB
C2PC RequestCover Letter(s)2018-05-30PDF 37 KB
Cover LetterCover Letter(s)2018-05-30PDF 53.6 KB
Extended FrequencyCover Letter(s)2018-05-30PDF 22.8 KB
Agent AuthorizationCover Letter(s)2018-04-24PDF 32.9 KB
C2PC RequestCover Letter(s)2018-04-24PDF 37 KB
C2PC Request RevisedCover Letter(s)2018-04-24PDF 37.1 KB
Confidential RequestCover Letter(s)2018-04-24PDF 33.1 KB
Cover LetterCover Letter(s)2018-04-24PDF 52.3 KB
Cover Letter RevisedCover Letter(s)2018-04-24PDF 53.2 KB
Authority LetterCover Letter(s)2013-05-03PDF 21.9 KB
C2PC LetterCover Letter(s)2013-05-03PDF 19.1 KB
Cover LetterCover Letter(s)2013-05-03PDF 50.4 KB
Authority LetterCover Letter(s)2008-06-19PDF 24.2 KB
C2PC LetterCover Letter(s)2008-06-19PDF 23.9 KB
Cover LetterCover Letter(s)2008-06-19PDF 39 KB
Justification LetterCover Letter(s)2008-06-19PDF 31.7 KB
Agent AuthorityCover Letter(s)2007-06-22PDF 25 KB
Cover LetterCover Letter(s)2007-06-22PDF 71.7 KB
Response letterCover Letter(s)2007-06-22PDF 10.5 KB
Response to FCC CorrespondanceCover Letter(s)2007-06-22PDF 10.9 KB
Response to FCC Correspondance 33210Cover Letter(s)2007-06-22PDF 10.4 KB
COVER LETTERCover Letter(s)2007-04-12PDF 73.3 KB
cover letterCover Letter(s)2007-02-02PDF 73.2 KB
AGENT AUTHORIZATION AND DECLARATIONCover Letter(s)2007-01-03PDF 24.7 KB
COVER LETTERCover Letter(s)2007-01-03PDF 73.2 KB
Agent Authority LtrCover Letter(s)2006-12-22PDF 25 KB
Cover LetterCover Letter(s)2006-12-22PDF 71.7 KB
Response to FCC QuestionsCover Letter(s)2006-12-22PDF 38.8 KB
AUTHORITY LETTERCover Letter(s)2006-06-07PDF 22.2 KB
CLASS II CHANGE REQUESTCover Letter(s)2006-06-07PDF 22.3 KB
COVER LETTERCover Letter(s)2006-06-07PDF 106.3 KB
AN000131A01 All Band ValidationRF Exposure Info2019-01-03PDF 551.1 KB
HAE6010A and HAE6011A ValidationRF Exposure Info2019-01-03PDF 1.5 MB
MPE Assessment 1 of 3RF Exposure Info2019-01-03PDF 2.7 MB
MPE Assessment 2 of 3RF Exposure Info2019-01-03PDF 1.8 MB
MPE Assessment 3 of 3RF Exposure Info2019-01-03PDF 1.1 MB
SAR ReportRF Exposure Info2019-01-03PDF 782.9 KB
SAR Report Appendix ARF Exposure Info2019-01-03PDF 1.5 MB
SAR Report Appendix BRF Exposure Info2019-01-03PDF 1.3 MB
MPE Assessment 1 of 3RF Exposure Info2018-05-30PDF 1.8 MB
MPE Assessment 2 of 3RF Exposure Info2018-05-30PDF 1.5 MB
MPE Assessment 3 of 3RF Exposure Info2018-05-30PDF 851.5 KB
SAR ReportRF Exposure Info2018-05-30PDF 658 KB
SAR Report Appendix ARF Exposure Info2018-05-30PDF 1.5 MB
SAR Report Appendix B HAE6010A and HAE6011A ValidationRF Exposure Info2018-05-30PDF 1.3 MB
SAR Report Appendix B HAE4011A ValidationRF Exposure Info2018-05-30PDF 552.1 KB
SAR Report Appendix B HAE6016A ValidationRF Exposure Info2018-05-30PDF 550.7 KB
SAR Report Appendix B HAF4013A ValidationRF Exposure Info2018-05-30PDF 517.5 KB
SAR Report Appendix B HAF4014A ValidationRF Exposure Info2018-05-30PDF 212.4 KB
SAR Report Appendix B HAF4017A ValidationRF Exposure Info2018-05-30PDF 373.3 KB
SAR Report Appendix B RAE4014ARB ValidationRF Exposure Info2018-05-30PDF 265.1 KB
SAR Report Appendix B ValidationRF Exposure Info2018-05-30PDF 1.1 MB
MPE Assessment 1 of 3RF Exposure Info2018-04-24PDF 1.6 MB
MPE Assessment 1 of 3 RevisedRF Exposure Info2018-04-24PDF 1.5 MB
MPE Assessment 2 of 3RF Exposure Info2018-04-24PDF 516 KB
MPE Assessment 2 of 3 RevisedRF Exposure Info2018-04-24PDF 423.1 KB
MPE Assessment 3 of 3RF Exposure Info2018-04-24PDF 368.2 KB
MPE Assessment 3 of 3 RevisedRF Exposure Info2018-04-24PDF 265.6 KB
SAR ReportRF Exposure Info2018-04-24PDF 503.9 KB
SAR Report Appendix ARF Exposure Info2018-04-24PDF 1.8 MB
SAR Report Appendix A RevisedRF Exposure Info2018-04-24PDF 1.5 MB
SAR Report Appendix BRF Exposure Info2018-04-24PDF 4.8 MB
SAR Report Appendix B All Band Validation RevisedRF Exposure Info2018-04-24PDF 551.1 KB
SAR Report Appendix B v7.6 RevisedRF Exposure Info2018-04-24PDF 1.1 MB
SAR Report RevisedRF Exposure Info2018-04-24PDF 479.9 KB
MPE Report 1RF Exposure Info2013-05-03PDF 2 MB
MPE Report 10RF Exposure Info2013-05-03PDF 1.6 MB
MPE Report 11RF Exposure Info2013-05-03PDF 1.2 MB
MPE Report 12RF Exposure Info2013-05-03PDF 1.8 MB
MPE Report 13RF Exposure Info2013-05-03PDF 1.3 MB
MPE Report 14RF Exposure Info2013-05-03PDF 1.5 MB
MPE Report 15RF Exposure Info2013-05-03PDF 1.6 MB
MPE Report 16RF Exposure Info2013-05-03PDF 1.4 MB
MPE Report 17RF Exposure Info2013-05-03PDF 1.4 MB
MPE Report 18RF Exposure Info2013-05-03PDF 1.2 MB
MPE Report 19RF Exposure Info2013-05-03PDF 1.6 MB
MPE Report 2RF Exposure Info2013-05-03PDF 1.9 MB
MPE Report 20RF Exposure Info2013-05-03PDF 1.2 MB
MPE Report 21RF Exposure Info2013-05-03PDF 1.3 MB
MPE Report 22RF Exposure Info2013-05-03PDF 1.9 MB
MPE Report 3RF Exposure Info2013-05-03PDF 1.5 MB
MPE Report 4RF Exposure Info2013-05-03PDF 1.9 MB
MPE Report 5RF Exposure Info2013-05-03PDF 1.5 MB
MPE Report 6RF Exposure Info2013-05-03PDF 1.9 MB
MPE Report 7RF Exposure Info2013-05-03PDF 2 MB
MPE Report 8RF Exposure Info2013-05-03PDF 2 MB
MPE Report 9RF Exposure Info2013-05-03PDF 1.5 MB
MPE-SAR Simulation Report 19RF Exposure Info2013-05-03PDF 2.9 MB
MPE-SAR Simulation Report 20RF Exposure Info2013-05-03PDF 2.6 MB
MPE-SAR Simulation Report 21RF Exposure Info2013-05-03PDF 2.6 MB
MPE-SAR Simulation Report 22RF Exposure Info2013-05-03PDF 1.6 MB
MPE-SAR Simulation Report 23RF Exposure Info2013-05-03PDF 2.5 MB
MPE-SAR Simulation Report 24RF Exposure Info2013-05-03PDF 1.4 MB
MPE-SAR Simulation Report 25RF Exposure Info2013-05-03PDF 2.5 MB
MPE-SAR Simulation Report 26RF Exposure Info2013-05-03PDF 1.2 MB
MPE-SAR Simulation Report 27RF Exposure Info2013-05-03PDF 2.9 MB
MPE-SAR Simulation Report 28RF Exposure Info2013-05-03PDF 1.2 MB
MPE-SAR Simulation Report 29RF Exposure Info2013-05-03PDF 2.6 MB
MPE-SAR Simulation Report 30RF Exposure Info2013-05-03PDF 1.2 MB
MPE-SAR Simulation Report 31RF Exposure Info2013-05-03PDF 2.6 MB
MPE-SAR Simulation Report 32RF Exposure Info2013-05-03PDF 2.9 MB
MPE-SAR Simulation Report 33RF Exposure Info2013-05-03PDF 2.9 MB
MPE-SAR Simulation Report 34RF Exposure Info2013-05-03PDF 2.6 MB
MPE-SAR Simulation Report 35RF Exposure Info2013-05-03PDF 2.6 MB
MPE-SAR Simulation Report 36RF Exposure Info2013-05-03PDF 1.3 MB
MPE-SAR Simulation Report 37RF Exposure Info2013-05-03PDF 2.9 MB
MPE-SAR Simulation Report 38RF Exposure Info2013-05-03PDF 1.3 MB
MPE-SAR Simulation Report 39RF Exposure Info2013-05-03PDF 3 MB
MPE-SAR Simulation Report 40RF Exposure Info2013-05-03PDF 1.3 MB
MPE-SAR Simulation Report 41RF Exposure Info2013-05-03PDF 2.9 MB
MPE-SAR Simulation Report 42RF Exposure Info2013-05-03PDF 1.2 MB
MPE-SAR Simulation Report 43RF Exposure Info2013-05-03PDF 2.6 MB
MPE-SAR Simulation Report 44RF Exposure Info2013-05-03PDF 1.8 MB
MPE-SAR Simulation Report 45RF Exposure Info2013-05-03PDF 2.9 MB
MPE-SAR Simulation Report 46RF Exposure Info2013-05-03PDF 2.6 MB
MPE-SAR Simulation Report 47RF Exposure Info2013-05-03PDF 2.5 MB
MPE-SAR Simulation Report 48RF Exposure Info2013-05-03PDF 2.9 MB
MPE-SAR Simulation Report 49RF Exposure Info2013-05-03PDF 3.3 MB
MPE-SAR Simulation Report 50RF Exposure Info2013-05-03PDF 1.8 MB
RF Exposure BookletRF Exposure Info2013-05-03PDF 168.7 KB
SAR Simulation Report 1RF Exposure Info2013-05-03PDF 3.4 MB
SAR Simulation Report 10RF Exposure Info2013-05-03PDF 1.9 MB
SAR Simulation Report 11RF Exposure Info2013-05-03PDF 3.2 MB
SAR Simulation Report 12RF Exposure Info2013-05-03PDF 2 MB
SAR Simulation Report 13RF Exposure Info2013-05-03PDF 3.1 MB
SAR Simulation Report 14RF Exposure Info2013-05-03PDF 3.4 MB
SAR Simulation Report 15RF Exposure Info2013-05-03PDF 3.2 MB
SAR Simulation Report 16RF Exposure Info2013-05-03PDF 2.5 MB
SAR Simulation Report 17RF Exposure Info2013-05-03PDF 2.9 MB
SAR Simulation Report 18RF Exposure Info2013-05-03PDF 2.6 MB
SAR Simulation Report 2RF Exposure Info2013-05-03PDF 3.2 MB
SAR Simulation Report 3RF Exposure Info2013-05-03PDF 3.1 MB
SAR Simulation Report 4RF Exposure Info2013-05-03PDF 1.5 MB
SAR Simulation Report 5RF Exposure Info2013-05-03PDF 3.1 MB
SAR Simulation Report 6RF Exposure Info2013-05-03PDF 1.9 MB
SAR Simulation Report 7RF Exposure Info2013-05-03PDF 3.1 MB
SAR Simulation Report 8RF Exposure Info2013-05-03PDF 1.9 MB
SAR Simulation Report 9RF Exposure Info2013-05-03PDF 3.4 MB
MPE SAR Report 1 - 4870, 4862 dvr ant 6012RF Exposure Info2007-06-22PDF 2.5 MB
MPE SAR Report 2 - 4867RF Exposure Info2007-06-22PDF 2.4 MB
MPE SAR Report 3 - 3806, 3808RF Exposure Info2007-06-22PDF 2.5 MB
MPE SAR Report 4 - 4870, 4862 dvr ant 2,3RF Exposure Info2007-06-22PDF 2.3 MB
MPE SAR Report 5 - 3806, 3803 dvr ant 2,3RF Exposure Info2007-06-22PDF 2.6 MB
MPE REPORT 1RF Exposure Info2007-04-12PDF 1.5 MB
MPE REPORT 2RF Exposure Info2007-04-12PDF 1.3 MB
RF EXPOSURE BOOKLETRF Exposure Info2007-04-12PDF 119.3 KB
mpe calculationRF Exposure Info2007-02-02PDF 40.5 KB
mpe reportRF Exposure Info2007-02-02PDF 1.2 MB
pages from mre reportRF Exposure Info2007-02-02PDF 24.1 KB
rf exposure bookletRF Exposure Info2007-02-02PDF 119.3 KB
MPE CALCULATIONSRF Exposure Info2007-01-03PDF 41.5 KB
MPE REPORTRF Exposure Info2007-01-03PDF 1.7 MB
RF EXPOSURE BOOKLETRF Exposure Info2007-01-03PDF 118.7 KB
MPE Report 1 - combination w/ 380-470MHzRF Exposure Info2006-12-22PDF 2.1 MB
MPE Report 2 - combination w/ 450-512MHzRF Exposure Info2006-12-22PDF 2.2 MB
MPE Report 3 - combination w/ 147-174MHzRF Exposure Info2006-12-22PDF 2.8 MB
Revised RF Exposure BookletRF Exposure Info2006-12-22PDF 119.1 KB
block diagram Metadata onlyBlock DiagramPDF 16 KB
Schematics Metadata onlySchematicsPDF 35.1 KB
schematics Metadata onlySchematicsPDF 89.6 KB
Response to FCC Inquiry Metadata onlyOperational DescriptionPDF 131.2 KB
operational description Metadata onlyOperational DescriptionPDF 23 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 34.9 KB
parts list Metadata onlyParts List/Tune Up InfoPDF 32.5 KB
tune up info Metadata onlyParts List/Tune Up InfoPDF 63.3 KB

Application Information

Application IDuCuq4BBdBFOrF7nsOy5BMg==
Final Action Date2020-11-04
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009192436
ModelDVRSUHF
Frequency Range380-406 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionDVRS Vehicular Repeater
Responsible PartyTony Bombera, P. Engineer, tonyb@futurecom.com , 905-660-5548
AgentSharly Sharly Sharly, Ultratech Engineering Labs Inc., sharly@ultratech-labs.com , 905-829-1570
Test FirmTri Luu, UltraTech Engineering Labs Inc, tri@ultratech-labs.com , 905-829-1570
TCB Emailvic@ultratech-labs.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure condit ions of its passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCCIDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCCID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for companion mobile radios and the DVRS device must be limited as described in filing. Class II permissive change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when MOBEXCOM DVR UHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR computation were performed on MOBEXCOM DVR UHF and these mobile radios authorized under FCC ID: AZ492FT7089. Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR UHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wi-Fi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089. Class II permissive change to address RF exposure condition of MOBEXCOM DVRS UHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing. Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package. Class II permissive change for a change of connectors, enclosure, screws as mentioned in the filing.

Applications

Application IDDatePurpose
uCuq4BBdBFOrF7nsOy5BMg==2020-11-04Class II permissive change or modification of presently authorized equipment
uyxyY5a/5Q2KBQ+yN8G36w==2019-03-20Class II permissive change or modification of presently authorized equipment
gopXk7fd783bOZC2can3mQ==2019-01-03Class II permissive change or modification of presently authorized equipment
TCnnIYJIVYZFEEvpQIRrNw==2018-05-30Class II permissive change or modification of presently authorized equipment
vLuhn+xC3EhppAz4plelww==2018-04-24Class II permissive change or modification of presently authorized equipment
LsM21mY7n3Oduk4qSTI2Dg==2013-05-03Class II permissive change or modification of presently authorized equipment
PxWuraLU2PSKDvrb1KRPoA==2008-06-19Class II permissive change or modification of presently authorized equipment
xJQCMXU+PGFgwO+DG2vF+A==2007-06-22Class II permissive change or modification of presently authorized equipment
ZCvAykK2psQ8ScLynfHd8A==2007-04-12Class II permissive change or modification of presently authorized equipment
+Srsn+/S6xu+9k/GDgHwDA==2007-02-02Class II permissive change or modification of presently authorized equipment
ukFAps24dsdIcmRlQqOrNw==2007-01-03Class II permissive change or modification of presently authorized equipment
JUeOIpBWQlOZd2ywFugEsQ==2006-12-22Class II permissive change or modification of presently authorized equipment
t3tU60WYzY6yi9Ze/bejRA==2006-06-07Class II permissive change or modification of presently authorized equipment
oc8fAXljrPPUYNmfTCPS3g==2004-12-15Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
380-406 MHz201.5ppm16K0F3E9BC, EF
380-512 MHz201.5ppm16K0F3E9BB
380-512 MHz201.5ppm11K0F3E9BB
380-406 MHz201.5ppm16K0F3E22, 74, 80, 9BC, EF
380-512 MHz201.5ppm11K0F3E90, 9BB
380-406 MHz201.5ppm11K0F3E9BC, EF
380-512 MHz201.5ppm11K0F3E9BC
380-512 MHz201.5ppm11K0F1E9BB
380-406 MHz201.5ppm11K0F3E22, 74, 80, 9BC, EF
380-512 MHz201.5ppm16K0F3E90, 9BB
380-512 MHz201.5ppm16K0F3E9BC
380-406 MHz201.5ppm8K10F1E9BC, EF
380-512 MHz201.5ppm16K0F1E9BB
380-406 MHz201.5ppm8K10F1E22, 74, 80, 9BC, EF
380-512 MHz201.5ppm11K0F1E90, 9BB
380-512 MHz201.5ppm11K0F1E9BC
380-512 MHz201.5ppm11K0F1E90, 9BC
380-406 MHz201.5ppm8K10F1D9BC, EF
380-512 MHz11.5ppm11K0F3E9BB
380-406 MHz201.5ppm8K10F1D22, 74, 80, 9BC, EF
380-512 MHz201.5ppm16K0F1E90, 9BB
380-512 MHz201.5ppm16K0F1E9BC
380-512 MHz201.5ppm16K0F1E90, 9BC
380-512 MHz11.5ppm16K0F3E9BB
380-512 MHz11.5ppm11K0F3E90, 9BB
380-512 MHz11.5ppm11K0F3E9BC
380-512 MHz11.5ppm11K0F1E9BB
380-512 MHz11.5ppm16K0F3E90, 9BB
380-512 MHz11.5ppm16K0F3E9BC
380-512 MHz11.5ppm16K0F1E9BB
380-512 MHz11.5ppm11K0F1E90, 9BB
380-512 MHz11.5ppm11K0F1E9BC
380-512 MHz11.5ppm16K0F1E90, 9BB
380-512 MHz11.5ppm16K0F1E9BC
403-512 MHz201.5ppm11K0F3E9BB
403-512 MHz201.5ppm16K0F3E9BB
403-512 MHz201.5ppm11K0F1E9BB
403-512 MHz201.5ppm16K0F1E9BB
403-512 MHz11.5ppm11K0F3E9BB
403-512 MHz11.5ppm16K0F3E9BB
403-512 MHz11.5ppm11K0F1E9BB
403-512 MHz11.5ppm16K0F1E9BB
406.1-512 MHz201.5ppm16K0F3E9BC, EF
406.1-512 MHz201.5ppm16K0F3E22, 74, 80, 9BC, EF
406.1-512 MHz201.5ppm11K0F3E9BC, EF
406.1-512 MHz201.5ppm11K0F3E22, 74, 80, 9BC, EF
406.1-512 MHz201.5ppm8K10F1E9BC, EF
406.1-512 MHz201.5ppm8K10F1E22, 74, 80, 9BC, EF

Grants

TCB Grant - Application ZCvAykK2psQ8ScLynfHd8A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION 		TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 04/12/2007

Application Dated: 04/12/2007
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR DIGITAL VEHICULAR REPEATER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 90 380.0  -  512.0 20.0 1.5  PM 11K0F3E
BC 90 380.0  -  512.0 20.0 1.5  PM 16K0F3E
BC 90 380.0  -  512.0 20.0 1.5  PM 11K0F1E
BC 90 380.0  -  512.0 20.0 1.5  PM 16K0F1E
BC 90 380.0  -  512.0 1.0 1.5  PM 11K0F3E
BC 90 380.0  -  512.0 1.0 1.5  PM 16K0F3E
BC 90 380.0  -  512.0 1.0 1.5  PM 11K0F1E
BC 90 380.0  -  512.0 1.0 1.5  PM 16K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population /RF Exposure separation distances of 75cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. The antenna used for this device must not exceed an antenna gain of 0 dBd. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance

This Class II change adds FCC ID: AZ492FT5823 and FCC ID: AZ492FT4867 combined with this transmitter. MPE compliance for specific co-located transmitters and specific FCC IDs is limited to operations as described in this filing. Co-located conditions for operation with AZ492FT5823 and AZ492FT4867 was evaluated for passenger and bystander configurations as shown in this Class II permissive change filing and requires a separation distance of at least 90cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested for and described with companion mobile radios operating in push-to-talk mode; with a duty factor not exceeding 50% and a maximum output power of 42W, 54W respectively for FCCID AZ492FT5823 and FCCID AZ492FT4867.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application ZCvAykK2psQ8ScLynfHd8A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION 		COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 04/12/2007

Application Dated: 04/12/2007
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR DIGITAL VEHICULAR REPEATER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 90 380.0  -  512.0 20.0 1.5  PM 11K0F3E
BC 90 380.0  -  512.0 20.0 1.5  PM 16K0F3E
BC 90 380.0  -  512.0 20.0 1.5  PM 11K0F1E
BC 90 380.0  -  512.0 20.0 1.5  PM 16K0F1E
BC 90 380.0  -  512.0 1.0 1.5  PM 11K0F3E
BC 90 380.0  -  512.0 1.0 1.5  PM 16K0F3E
BC 90 380.0  -  512.0 1.0 1.5  PM 11K0F1E
BC 90 380.0  -  512.0 1.0 1.5  PM 16K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population /RF Exposure separation distances of 75cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. The antenna used for this device must not exceed an antenna gain of 0 dBd. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance

This Class II change adds FCC ID: AZ492FT5823 and FCC ID: AZ492FT4867 combined with this transmitter. MPE compliance for specific co-located transmitters and specific FCC IDs is limited to operations as described in this filing. Co-located conditions for operation with AZ492FT5823 and AZ492FT4867 was evaluated for passenger and bystander configurations as shown in this Class II permissive change filing and requires a separation distance of at least 90cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested for and described with companion mobile radios operating in push-to-talk mode; with a duty factor not exceeding 50% and a maximum output power of 42W, 54W respectively for FCCID AZ492FT5823 and FCCID AZ492FT4867.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA236300

TCB Grant - Application xJQCMXU+PGFgwO+DG2vF+A==

This application does not exist.

EAS Grant - Application xJQCMXU+PGFgwO+DG2vF+A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 06/22/2007

Application Dated: 04/12/2007
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 90 380.0  -  512.0 20.0 1.5  PM 11K0F3E
BC 90 380.0  -  512.0 20.0 1.5  PM 16K0F3E
BC 90 380.0  -  512.0 20.0 1.5  PM 11K0F1E
BC 90 380.0  -  512.0 20.0 1.5  PM 16K0F1E
BC 90 380.0  -  512.0 1.0 1.5  PM 11K0F3E
BC 90 380.0  -  512.0 1.0 1.5  PM 16K0F3E
BC 90 380.0  -  512.0 1.0 1.5  PM 11K0F1E
BC 90 380.0  -  512.0 1.0 1.5  PM 16K0F1E

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50% for this or associated mobile-station devices. All qualified end users of this device must have knowledge to control the exposure conditions of vehicle passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in filings, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any antenna other than as specified herein must be addressed at the time of licensing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. Waiver of 47 CFR 1.1310 and 2.1091(d) was applied as described in filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCC IDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in the filings, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for associated mobile-station devices and the vehicle-mount repeater must be limited as described in filings.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application vLuhn+xC3EhppAz4plelww==

Mail To:
Tri Luu, VP-Engineering
UltraTech Engineering Labs Inc.
3000 Bristol Circle
Oakville, L6H 6G4
Canada
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 04/24/2018

Application Dated: 06/27/2017
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 380.0  -  406.0 20.0 1.5  PM 16K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 11K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1D
BC EF 90 406.1  -  512.0 20.0 1.5  PM 16K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 11K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1D

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCCIDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCCID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for companion mobile radios and the DVRS device must be limited as described in filing.

Class II permissive change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when MOBEXCOM DVR UHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR computation were performed on MOBEXCOM DVR UHF and these mobile radios authorized under FCC ID: AZ492FT7089.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application vLuhn+xC3EhppAz4plelww==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 04/24/2018

Application Dated: 06/27/2017
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 380.0  -  406.0 20.0 1.5  PM 16K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 11K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1D
BC EF 90 406.1  -  512.0 20.0 1.5  PM 16K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 11K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1D

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCCIDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCCID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for companion mobile radios and the DVRS device must be limited as described in filing.

Class II permissive change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when MOBEXCOM DVR UHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR computation were performed on MOBEXCOM DVR UHF and these mobile radios authorized under FCC ID: AZ492FT7089.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application uyxyY5a/5Q2KBQ+yN8G36w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 03/20/2019

Application Dated: 03/19/2019
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 8K10F1D
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 8K10F1D

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure condit ions of its passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCCIDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCCID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for companion mobile radios and the DVRS device must be limited as described in filing.

Class II permissive change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when MOBEXCOM DVR UHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR computation were performed on MOBEXCOM DVR UHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR UHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wi-Fi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS UHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.

Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application uyxyY5a/5Q2KBQ+yN8G36w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 03/20/2019

Application Dated: 03/19/2019
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 8K10F1D
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 8K10F1D

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure condit ions of its passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCCIDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCCID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for companion mobile radios and the DVRS device must be limited as described in filing.

Class II permissive change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when MOBEXCOM DVR UHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR computation were performed on MOBEXCOM DVR UHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR UHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wi-Fi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS UHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.

Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application ukFAps24dsdIcmRlQqOrNw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 01/03/2007

Application Dated: 01/03/2007
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR DIGITAL VEHICULAR REPEATER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 380.0  -  512.0 20.0 1.5  PM 11K0F3E
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 20.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, with a duty factor not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for specific transmitter and collocated conditions for operation with FCC ID AZ492FT5823 was evaluated for passengers and bystanders configurations as shown in this class 2 permissive change filing and requires a separation distance of at least 60cm from the vehicle body for antenna mounted in center of roof top and center of trunk lid. Additionally, trunk lid mounted antennas require a separation distance of at least 85cm from rear seat passengers. This class 2 permissive change limits this transmitter for operation within 450-470MHz with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50% and a maximum antenna gain of 3dBd.

BB: Power output continuously variable from value listed to less than 0.5 watts.

EAS Grant - Application ukFAps24dsdIcmRlQqOrNw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 01/03/2007

Application Dated: 01/03/2007
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR DIGITAL VEHICULAR REPEATER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 380.0  -  512.0 20.0 1.5  PM 11K0F3E
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 20.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, with a duty factor not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for specific transmitter and collocated conditions for operation with FCC ID AZ492FT5823 was evaluated for passengers and bystanders configurations as shown in this class 2 permissive change filing and requires a separation distance of at least 60cm from the vehicle body for antenna mounted in center of roof top and center of trunk lid. Additionally, trunk lid mounted antennas require a separation distance of at least 85cm from rear seat passengers. This class 2 permissive change limits this transmitter for operation within 450-470MHz with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50% and a maximum antenna gain of 3dBd.


BB: Power output continuously variable from value listed to less than 0.5 watts.

TCB Grant - Application uCuq4BBdBFOrF7nsOy5BMg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 11/04/2020

Application Dated: 11/04/2020
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: DVRS Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 8K10F1D
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 8K10F1D

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure condit ions of its passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCCIDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCCID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for companion mobile radios and the DVRS device must be limited as described in filing. Class II permissive change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when MOBEXCOM DVR UHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR computation were performed on MOBEXCOM DVR UHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR UHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wi-Fi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS UHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.

Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package.

Class II permissive change for a change of connectors, enclosure, screws as mentioned in the filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application uCuq4BBdBFOrF7nsOy5BMg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 11/04/2020

Application Dated: 11/04/2020
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 380.0  -  406.0 20.0 1.5  PM 8K10F1D
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 406.1  -  512.0 20.0 1.5  PM 8K10F1D

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure condit ions of its passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCCIDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCCID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for companion mobile radios and the DVRS device must be limited as described in filing. Class II permissive change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when MOBEXCOM DVR UHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR computation were performed on MOBEXCOM DVR UHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR UHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wi-Fi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS UHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.

Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package.

Class II permissive change for a change of connectors, enclosure, screws as mentioned in the filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application TCnnIYJIVYZFEEvpQIRrNw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 05/30/2018

Application Dated: 05/08/2018
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 380.0  -  406.0 20.0 1.5  PM 16K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 11K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1D
BC EF 90 406.1  -  512.0 20.0 1.5  PM 16K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 11K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1D

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCCIDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCCID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for companion mobile radios and the DVRS device must be limited as described in filing.

Class II permissive change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when MOBEXCOM DVR UHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR computation were performed on MOBEXCOM DVR UHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR UHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wi-Fi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application TCnnIYJIVYZFEEvpQIRrNw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 05/30/2018

Application Dated: 05/08/2018
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 380.0  -  406.0 20.0 1.5  PM 16K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 11K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1D
BC EF 90 406.1  -  512.0 20.0 1.5  PM 16K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 11K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1D

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCCIDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCCID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for companion mobile radios and the DVRS device must be limited as described in filing.

Class II permissive change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when MOBEXCOM DVR UHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR computation were performed on MOBEXCOM DVR UHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR UHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wi-Fi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application t3tU60WYzY6yi9Ze/bejRA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 06/07/2006

Application Dated: 06/07/2006
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR VEHICULAR REPEATER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 380.0  -  512.0 20.0 1.5  PM 11K0F3E
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 20.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population /RF Exposure separation distances of 75cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

BB: Power output continuously variable from value listed to less than 0.5 watts.

EAS Grant - Application t3tU60WYzY6yi9Ze/bejRA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 06/07/2006

Application Dated: 06/07/2006
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR VEHICULAR REPEATER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 380.0  -  512.0 20.0 1.5  PM 11K0F3E
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 20.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population /RF Exposure separation distances of 75cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


BB: Power output continuously variable from value listed to less than 0.5 watts.

TCB Grant - Application PxWuraLU2PSKDvrb1KRPoA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 06/19/2008

Application Dated: 06/19/2008
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 380.0  -  406.0 20.0 1.5  PM 11K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 16K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1D
BC EF 90 406.1  -  512.0 20.0 1.5  PM 11K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 16K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1D

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50% for this or associated mobile-station devices. All qualified end users of this device must have knowledge to control the exposure conditions of vehicle passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in filings, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any antenna other than as specified herein must be addressed at the time of licensing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. Waiver of 47 CFR 1.1310 and 2.1091(d) was applied as described in filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCC IDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in the filings, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for associated mobile-station devices and the vehicle-mount repeater must be limited as described in filings.

Class II Permissive Change is to correct the emission designators 11K0F1E and 16K0F1E to 8K10F1E and 8K10F1D respectively for 12.5 kHz channel spacing for digital modulation.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application PxWuraLU2PSKDvrb1KRPoA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 06/19/2008

Application Dated: 06/19/2008
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 380.0  -  406.0 20.0 1.5  PM 11K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 16K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1D
BC EF 90 406.1  -  512.0 20.0 1.5  PM 11K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 16K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1D

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50% for this or associated mobile-station devices. All qualified end users of this device must have knowledge to control the exposure conditions of vehicle passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in filings, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any antenna other than as specified herein must be addressed at the time of licensing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. Waiver of 47 CFR 1.1310 and 2.1091(d) was applied as described in filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCC IDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in the filings, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for associated mobile-station devices and the vehicle-mount repeater must be limited as described in filings.

Class II Permissive Change is to correct the emission designators 11K0F1E and 16K0F1E to 8K10F1E and 8K10F1D respectively for 12.5 kHz channel spacing for digital modulation.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application oc8fAXljrPPUYNmfTCPS3g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 12/15/2004

Application Dated: 12/15/2004
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Vehicular Transmitter and Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 403.0  -  512.0 20.0 1.5  PM 11K0F3E
BB 90 403.0  -  512.0 20.0 1.5  PM 16K0F3E
BB 90 403.0  -  512.0 20.0 1.5  PM 11K0F1E
BB 90 403.0  -  512.0 20.0 1.5  PM 16K0F1E
BB 90 403.0  -  512.0 1.0 1.5  PM 11K0F3E
BB 90 403.0  -  512.0 1.0 1.5  PM 16K0F3E
BB 90 403.0  -  512.0 1.0 1.5  PM 11K0F1E
BB 90 403.0  -  512.0 1.0 1.5  PM 16K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population /RF Exposure separation distances of 70cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


BB: Power output continuously variable from value listed to less than 0.5 watts.

EAS Grant - Application oc8fAXljrPPUYNmfTCPS3g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 12/15/2004

Application Dated: 12/15/2004
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Vehicular Transmitter and Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 403.0  -  512.0 20.0 1.5  PM 11K0F3E
BB 90 403.0  -  512.0 20.0 1.5  PM 16K0F3E
BB 90 403.0  -  512.0 20.0 1.5  PM 11K0F1E
BB 90 403.0  -  512.0 20.0 1.5  PM 16K0F1E
BB 90 403.0  -  512.0 1.0 1.5  PM 11K0F3E
BB 90 403.0  -  512.0 1.0 1.5  PM 16K0F3E
BB 90 403.0  -  512.0 1.0 1.5  PM 11K0F1E
BB 90 403.0  -  512.0 1.0 1.5  PM 16K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population /RF Exposure separation distances of 70cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


BB: Power output continuously variable from value listed to less than 0.5 watts.

TCB Grant - Application LsM21mY7n3Oduk4qSTI2Dg==

This application does not exist.

EAS Grant - Application LsM21mY7n3Oduk4qSTI2Dg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 05/03/2013

Application Dated: 12/24/2012
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 380.0  -  406.0 20.0 1.5  PM 16K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 11K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1D
BC EF 90 406.1  -  512.0 20.0 1.5  PM 16K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 11K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1D

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCCIDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCCID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for companion mobile radios and the DVRS device must be limited as described in filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application JUeOIpBWQlOZd2ywFugEsQ==

This application does not exist.

EAS Grant - Application JUeOIpBWQlOZd2ywFugEsQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 12/22/2006

Application Dated: 10/06/2006
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR UHF
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 20.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F1E

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. A waiver of 47 CFR 1.1310 and 2.1091(d) as detailed in this filing was approved. MPE compliance for specific collocated conditions and specific FCCIDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCCID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for companion mobile radios and the DVRS must be limited as described in filing.


BB: Power output continuously variable from value listed to less than 0.5 watts.

TCB Grant - Application gopXk7fd783bOZC2can3mQ==

Mail To:
Tri Luu, VP-Engineering
UltraTech Engineering Labs Inc.
3000 Bristol Circle
Oakville, L6H 6G4
Canada
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 01/03/2019

Application Dated: 12/11/2018
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 380.0  -  406.0 20.0 1.5  PM 16K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 11K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1D
BC EF 90 406.1  -  512.0 20.0 1.5  PM 16K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 11K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1D

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCCIDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCCID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for companion mobile radios and the DVRS device must be limited as described in filing.

Class II permissive change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when MOBEXCOM DVR UHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR computation were performed on MOBEXCOM DVR UHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR UHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wi-Fi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS UHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application gopXk7fd783bOZC2can3mQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 01/03/2019

Application Dated: 12/11/2018
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 380.0  -  406.0 20.0 1.5  PM 16K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 11K0F3E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1E
BC EF 90 380.0  -  406.0 20.0 1.5  PM 8K10F1D
BC EF 90 406.1  -  512.0 20.0 1.5  PM 16K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 11K0F3E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1E
BC EF 90 406.1  -  512.0 20.0 1.5  PM 8K10F1D

Output power is conducted. This device must be restricted to work-related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distance of 75 cm for General Population / Uncontrolled RF Exposure compliance as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device directing users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific collocated conditions and specific FCCIDs in limited frequency ranges was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCCID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; output powers for companion mobile radios and the DVRS device must be limited as described in filing.

Class II permissive change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when MOBEXCOM DVR UHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR computation were performed on MOBEXCOM DVR UHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR UHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wi-Fi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS UHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application +Srsn+/S6xu+9k/GDgHwDA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION 		TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 02/02/2007

Application Dated: 02/02/2007
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Digital Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 380.0  -  512.0 20.0 1.5  PM 11K0F3E
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 20.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, with a duty factor not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for specific transmitter and collocated conditions for operation with FCC ID AZ492FT5823 was evaluated for passengers and bystanders configurations as shown in this Class 2 permissive change filing and requires a separation distance of at least 60cm from the vehicle body for antenna mounted in center of roof top and center of trunk lid. Additionally, trunk lid mounted antennas require a separation distance of at least 85cm from rear seat passengers. This class 2 permissive change limits this transmitter for operation within 450-470MHz with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50% and a maximum antenna gain of 3dBd. This Class 2 permissive change limits this transmitter for operation within 380-430MHz with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50% and a maximum antenna gain of 3dBd.

BB: Power output continuously variable from value listed to less than 0.5 watts.

EAS Grant - Application +Srsn+/S6xu+9k/GDgHwDA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION 		COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 02/02/2007

Application Dated: 02/02/2007
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSUHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR Digital Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 380.0  -  512.0 20.0 1.5  PM 11K0F3E
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 20.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 20.0 1.5  PM 16K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F3E
BB 90 380.0  -  512.0 1.0 1.5  PM 11K0F1E
BB 90 380.0  -  512.0 1.0 1.5  PM 16K0F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, with a duty factor not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 0 dBd. MPE compliance for specific transmitter and collocated conditions for operation with FCC ID AZ492FT5823 was evaluated for passengers and bystanders configurations as shown in this Class 2 permissive change filing and requires a separation distance of at least 60cm from the vehicle body for antenna mounted in center of roof top and center of trunk lid. Additionally, trunk lid mounted antennas require a separation distance of at least 85cm from rear seat passengers. This class 2 permissive change limits this transmitter for operation within 450-470MHz with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50% and a maximum antenna gain of 3dBd. This Class 2 permissive change limits this transmitter for operation within 380-430MHz with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50% and a maximum antenna gain of 3dBd.


BB: Power output continuously variable from value listed to less than 0.5 watts.

Mail To:


EA769758