1. FCC ID
  2. LO6
  3. LO6-DVRSVHF

FCC ID LO6-DVRSVHF

DVRS Vehicular Repeater

by Futurecom Systems Group ULC.

Grantee Code: LO6   Product Code: DVRSVHF
Latest application date: 2020-09-02

FCC ID Device Details

FCC IDLO6-DVRSVHF
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLO6
Product CodeDVRSVHF
Applicant BusinessFuturecom Systems Group ULC. 🇨🇦
Related Domains futurecom.com
Equipment ClassDVRS Vehicular Repeater
Test FirmUltraTech Engineering Labs Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
136-174 MHzClass II permissive change or modification of presently authorized equipment2020-09-02
136-174 MHzClass II permissive change or modification of presently authorized equipment2020-05-11
136-174 MHzClass II permissive change or modification of presently authorized equipment2019-07-18
136-174 MHzClass II permissive change or modification of presently authorized equipment2019-03-12
136-174 MHzClass II permissive change or modification of presently authorized equipment2019-01-03
136-174 MHzClass II permissive change or modification of presently authorized equipment2018-05-30
136-174 MHzClass II permissive change or modification of presently authorized equipment2018-04-03
136-174 MHzClass II permissive change or modification of presently authorized equipment2013-05-03
136-174 MHzClass II permissive change or modification of presently authorized equipment2008-07-22
136-174 MHzClass II permissive change or modification of presently authorized equipment2007-09-21
136-174 MHzClass II permissive change or modification of presently authorized equipment2007-07-27
136-174 MHzClass II permissive change or modification of presently authorized equipment2006-09-06
136-174 MHzClass II permissive change or modification of presently authorized equipment2006-06-05
136-174 MHzOriginal Equipment2004-12-20

Exhibits

DocumentTypeAvailableFile
Users Manual RevisionUsers Manual2020-09-02PDF 302.5 KB
68007024095-B_sample antenna verbiage bookletUsers Manual2020-05-11PDF 775.8 KB
Installation Manual for Base Loaded Mobile AntennasUsers Manual2020-05-11PDF 3.1 MB
Installation Manual for VHF Vehicle Roof-Top AntennasUsers Manual2020-05-11PDF 771.1 KB
RF Safety BookletUsers Manual2020-05-11PDF 709.5 KB
RF Safety Booklet R16.1Users Manual2020-05-11PDF 1.1 MB
RF Safety Booklet R16.2Users Manual2020-05-11PDF 1.1 MB
User ManualUsers Manual2020-05-11PDF 185.7 KB
RF Safety BookletUsers Manual2019-07-18PDF 885.5 KB
User ManualUsers Manual2019-07-18PDF 185.7 KB
Installation ManualUsers Manual2019-01-03PDF 3.1 MB
RF Safety BookletUsers Manual2019-01-03PDF 885.5 KB
User ManualUsers Manual2019-01-03PDF 185.4 KB
RF Safety BookletUsers Manual2018-05-30PDF 755.1 KB
Trimmable AntennaUsers Manual2018-05-30PDF 3.1 MB
User ManualUsers Manual2018-05-30PDF 185.4 KB
RF Safety BookletUsers Manual2018-04-03PDF 514.7 KB
RF Safety Booklet RevisedUsers Manual2018-04-03PDF 725 KB
User ManualUsers Manual2018-04-03PDF 149.4 KB
User Manual RevisedUsers Manual2018-04-03PDF 185.4 KB
Updated User ManualUsers Manual2013-05-03PDF 111.6 KB
RF Exposure BookletUsers Manual2007-09-21PDF 119.6 KB
User ManualUsers Manual2007-09-21PDF 133 KB
RF EXPOSURE BOOKLETUsers Manual2007-07-27PDF 119.6 KB
USERS MANUALUsers Manual2007-07-27PDF 133 KB
users manualUsers Manual2006-09-06PDF 132.9 KB
RF Exposure BookletUsers Manual2006-06-05PDF 109.7 KB
Revised DVRS User ManualUsers Manual2006-06-05PDF 142.3 KB
User ManualUsers Manual2006-06-05PDF 125.2 KB
USERS MANUAL Metadata onlyUsers Manual2004-12-20PDF 122.2 KB
users manualUsers Manual2004-12-20PDF 197.9 KB
Internal Photograph of changesInternal Photos2020-09-02PDF 267 KB
Internal PhotosInternal Photos2019-03-12PDF 541.4 KB
internal photosInternal Photos2006-09-06PDF 1.6 MB
INTERNAL PHOTOSInternal Photos2004-12-20PDF 928 KB
External PhotosExternal Photos2020-09-02PDF 177.3 KB
System ConfigurationExternal Photos2020-05-11PDF 103.9 KB
System ConfigurationExternal Photos2019-07-18PDF 103.9 KB
Digital Vehicular Repeater System (DVRS)External Photos2018-05-30PDF 103.9 KB
System ConfigurationExternal Photos2018-04-03PDF 103.9 KB
System ConfigurationExternal Photos2013-05-03PDF 76.2 KB
System ConfigurationExternal Photos2007-09-21PDF 76.5 KB
SYSTEM CONFIGURATIONExternal Photos2007-07-27PDF 76.5 KB
external photosExternal Photos2006-09-06PDF 324.1 KB
System ConfigurationExternal Photos2006-06-05PDF 223.8 KB
EXTERNAL PHOTOSExternal Photos2004-12-20PDF 61.5 KB
Revised LabelID Label/Location Info2020-09-02PDF 147 KB
ID LABEL AND LOCATIONID Label/Location Info2004-12-20PDF 34.6 KB
occupational warningID Label/Location Info2004-12-20PDF 46.5 KB
Test Setup PhotosTest Setup Photos2020-09-02PDF 139.4 KB
Test setup photosTest Setup Photos2019-03-12PDF 92.7 KB
Test Setup DistanceTest Setup Photos2013-05-03PDF 36 KB
Test Setup DiagramTest Setup Photos2007-09-21PDF 224.7 KB
test setup photosTest Setup Photos2006-09-06PDF 162.6 KB
Test ReportTest Report2020-09-02PDF 367.7 KB
Test ReportTest Report2019-03-12PDF 3.3 MB
MPE Test ReportRF Exposure Info2007-09-21PDF 3 MB
test reportTest Report2006-09-06PDF 189.9 KB
Power Measurement Setup DiagramTest Report2006-06-05PDF 12.9 KB
TEST REPORTTest Report2004-12-20PDF 1.1 MB
Manufacturer Attestation of operationAttestation Statements2020-09-02PDF 90.3 KB
Companion Radios VariantAttestation Statements2020-05-11PDF 131.8 KB
Manufacturer AttestationAttestation Statements2020-05-11PDF 37.3 KB
Manufacturer AttestationCover Letter(s)2019-07-18PDF 36.5 KB
Attestation of operationAttestation Statements2019-03-12PDF 22.3 KB
Manufacturer AttestationCover Letter(s)2019-01-03PDF 36.5 KB
Extended FreqquencyAttestation Statements2018-04-03PDF 33.2 KB
Response for Correspondence IICover Letter(s)2013-05-03PDF 71.4 KB
Updated Appliant Attestation letter for Sec 90.203(j)(5) complianceAttestation Statements2013-05-03PDF 38.6 KB
C2PC LetterAttestation Statements2008-07-22PDF 23.8 KB
Justification LetterAttestation Statements2008-07-22PDF 26.3 KB
Agent AuthorityAttestation Statements2006-06-05PDF 24.7 KB
Class II Permissive change letterCover Letter(s)2020-09-02PDF 59.7 KB
FCC Agent Authority LetterCover Letter(s)2020-09-02PDF 115.5 KB
cover letterCover Letter(s)2020-09-02PDF 166.2 KB
Agent AuthorizationCover Letter(s)2020-05-11PDF 32.9 KB
C2PC RequestCover Letter(s)2020-05-11PDF 37.7 KB
Confidentiality RequestCover Letter(s)2020-05-11PDF 33 KB
Cover LetterCover Letter(s)2020-05-11PDF 66.8 KB
Extended FrequenciesCover Letter(s)2020-05-11PDF 33.2 KB
Agent AuthorizationCover Letter(s)2019-07-18PDF 33.1 KB
C2PCCover Letter(s)2019-07-18PDF 37.1 KB
Cover LetterCover Letter(s)2019-07-18PDF 66.3 KB
Extended FrequenciesCover Letter(s)2019-07-18PDF 33.3 KB
Agent authority letterCover Letter(s)2019-03-12PDF 18.2 KB
Class II Permissive change letterCover Letter(s)2019-03-12PDF 18.3 KB
Confidentiality letterCover Letter(s)2019-03-12PDF 18.3 KB
Cover letterCover Letter(s)2019-03-12PDF 99.5 KB
Justification letterCover Letter(s)2019-03-12PDF 18.4 KB
Agent AuthorizationCover Letter(s)2019-01-03PDF 33.1 KB
C2PCCover Letter(s)2019-01-03PDF 37.5 KB
Cover LetterCover Letter(s)2019-01-03PDF 66.7 KB
Extended FrequenciesCover Letter(s)2019-01-03PDF 33.3 KB
Agent AuthorizationCover Letter(s)2018-05-30PDF 33 KB
C2PC RequestCover Letter(s)2018-05-30PDF 37 KB
Cover LetterCover Letter(s)2018-05-30PDF 52.3 KB
Extended FrequencyCover Letter(s)2018-05-30PDF 33.3 KB
Agent AuthorizationCover Letter(s)2018-04-03PDF 32.9 KB
C2PC RequestCover Letter(s)2018-04-03PDF 36.9 KB
C2PC Request RevisedCover Letter(s)2018-04-03PDF 37.1 KB
Confidential RequestCover Letter(s)2018-04-03PDF 33.1 KB
Cover LetterCover Letter(s)2018-04-03PDF 51.8 KB
Cover Letter RevisedCover Letter(s)2018-04-03PDF 52.3 KB
Authority LetterCover Letter(s)2013-05-03PDF 17 KB
C2PC LetterCover Letter(s)2013-05-03PDF 17.8 KB
Cover LetterCover Letter(s)2013-05-03PDF 50.4 KB
Freq Justification LetterCover Letter(s)2013-05-03PDF 22.3 KB
Authority LetterCover Letter(s)2008-07-22PDF 24.4 KB
Cover LetterCover Letter(s)2008-07-22PDF 41 KB
Authority and Declaration LetterCover Letter(s)2007-09-21PDF 24.9 KB
Cover LetterCover Letter(s)2007-09-21PDF 71.7 KB
Response to FCC CorrespondenceCover Letter(s)2007-09-21PDF 8.8 KB
Resposne to FCC correspondenceCover Letter(s)2007-09-21PDF 10.3 KB
AGENT AUTH AND DECLARATIONCover Letter(s)2007-07-27PDF 24.9 KB
COVER LETTERCover Letter(s)2007-07-27PDF 73.3 KB
class II change letterCover Letter(s)2006-09-06PDF 22.5 KB
cover letterCover Letter(s)2006-09-06PDF 70.5 KB
Cover LetterCover Letter(s)2006-06-05PDF 73.2 KB
Manufacturer DeclarationCover Letter(s)2006-06-05PDF 24.7 KB
Response to FCC questionsCover Letter(s)2006-06-05PDF 23.8 KB
CONFIDENTIALITY LETTERCover Letter(s)2004-12-20PDF 27.5 KB
MPE Assessment 1 of 2RF Exposure Info2020-05-11PDF 3.2 MB
MPE Assessment 2 of 2RF Exposure Info2020-05-11PDF 1.4 MB
SAR ReportRF Exposure Info2020-05-11PDF 873.1 KB
SAR Report Appendix ARF Exposure Info2020-05-11PDF 1.5 MB
SAR Report Appendix BRF Exposure Info2020-05-11PDF 1.4 MB
HAE6010A and HAE6011A ValidationRF Exposure Info2019-07-18PDF 1.6 MB
SAR ReportRF Exposure Info2019-07-18PDF 296.8 KB
SAR Report Appendix ARF Exposure Info2019-07-18PDF 1.5 MB
SAR Report Appendix BRF Exposure Info2019-07-18PDF 1.3 MB
SAR Report RevisedRF Exposure Info2019-07-18PDF 628.6 KB
AN000131A01 All Band ValidationRF Exposure Info2019-01-03PDF 551.1 KB
HAE4011A ValidationRF Exposure Info2019-01-03PDF 552.1 KB
HAE4012A ValidationRF Exposure Info2019-01-03PDF 535.3 KB
HAE4013A ValidationRF Exposure Info2019-01-03PDF 963.7 KB
HAE6016A ValidationRF Exposure Info2019-01-03PDF 550.7 KB
HAF4013A ValidationRF Exposure Info2019-01-03PDF 517.5 KB
HAF4014A ValidationRF Exposure Info2019-01-03PDF 218.4 KB
HAF4017A ValidationRF Exposure Info2019-01-03PDF 373.3 KB
MPE Assessment 1 of 3RF Exposure Info2019-01-03PDF 2.3 MB
MPE Assessment 2 of 3RF Exposure Info2019-01-03PDF 1.8 MB
MPE Assessment 3 of 3RF Exposure Info2019-01-03PDF 1.1 MB
RAE4014ARB ValidationRF Exposure Info2019-01-03PDF 265.1 KB
RAE4016ARB ValidationRF Exposure Info2019-01-03PDF 264 KB
SAR ReportRF Exposure Info2019-01-03PDF 993.1 KB
SAR Report Appendix ARF Exposure Info2019-01-03PDF 1.5 MB
SAR Report Appendix BRF Exposure Info2019-01-03PDF 1.3 MB
MPE Assessment 1 of 3RF Exposure Info2018-05-30PDF 1.9 MB
MPE Assessment 2 of 3RF Exposure Info2018-05-30PDF 1.6 MB
MPE Assessment 3 of 3RF Exposure Info2018-05-30PDF 882.8 KB
SAR ReportRF Exposure Info2018-05-30PDF 869.7 KB
SAR Report Appendix B HAE4012A ValidationRF Exposure Info2018-05-30PDF 535.3 KB
SAR Report Appendix B HAE4011A ValidationRF Exposure Info2018-05-30PDF 552.1 KB
SAR Report Appendix B HAE4013A ValidationRF Exposure Info2018-05-30PDF 963.7 KB
SAR Report Appendix B HAE6010A and HAE6011A ValidationRF Exposure Info2018-05-30PDF 1.3 MB
SAR Report Appendix B HAE6016A ValidationRF Exposure Info2018-05-30PDF 550.7 KB
SAR Report Appendix B HAF4013A ValidationRF Exposure Info2018-05-30PDF 517.5 KB
SAR Report Appendix B HAF4014A ValidationRF Exposure Info2018-05-30PDF 212.4 KB
SAR Report Appendix B HAF4017A ValidationRF Exposure Info2018-05-30PDF 373.3 KB
SAR Report Appendix B RAE4014ARB ValidationRF Exposure Info2018-05-30PDF 265.1 KB
SAR Report Appendix B RAE4016ARB ValidationRF Exposure Info2018-05-30PDF 264 KB
SAR Report Appendix B ValidationRF Exposure Info2018-05-30PDF 1.1 MB
MPE Assessment 1 of 3RF Exposure Info2018-04-03PDF 1.6 MB
MPE Assessment 1 of 3 RevisedRF Exposure Info2018-04-03PDF 1.5 MB
MPE Assessment 2 of 3RF Exposure Info2018-04-03PDF 616.3 KB
MPE Assessment 2 of 3 RevisedRF Exposure Info2018-04-03PDF 524.5 KB
MPE Assessment 3 of 3RF Exposure Info2018-04-03PDF 421.5 KB
MPE Assessment 3 of 3 RevisedRF Exposure Info2018-04-03PDF 311.9 KB
SAR ReportRF Exposure Info2018-04-03PDF 489.3 KB
SAR Report Appendix ARF Exposure Info2018-04-03PDF 1.8 MB
SAR Report Appendix A RevisedRF Exposure Info2018-04-03PDF 1.5 MB
SAR Report Appendix BRF Exposure Info2018-04-03PDF 4.8 MB
SAR Report Appendix B All Band Validation RevisedRF Exposure Info2018-04-03PDF 551.1 KB
SAR Report Appendix B v7.6 RevisedRF Exposure Info2018-04-03PDF 1.1 MB
SAR Report RevisedRF Exposure Info2018-04-03PDF 495.6 KB
RF Exposure BookletRF Exposure Info2013-05-03PDF 168.7 KB
SAR Simulation Report 1 - AZ492FT3821RF Exposure Info2013-05-03PDF 3.1 MB
SAR Simulation Report 10 - AZ492FT4896RF Exposure Info2013-05-03PDF 3 MB
SAR Simulation Report 11 - AZ492FT7047RF Exposure Info2013-05-03PDF 2.7 MB
SAR Simulation Report 12 - AZ492FT7047RF Exposure Info2013-05-03PDF 3 MB
SAR Simulation Report 13 - AZ492FT7048 pt1RF Exposure Info2013-05-03PDF 3 MB
SAR Simulation Report 14 - AZ492FT7048 pt2RF Exposure Info2013-05-03PDF 3.3 MB
SAR Simulation Report 15 - AZ492FT7043 pt1RF Exposure Info2013-05-03PDF 3 MB
SAR Simulation Report 16 - AZ492FT7043 pt2RF Exposure Info2013-05-03PDF 3.3 MB
SAR Simulation Report 17 - AZ492FT4904 pt1RF Exposure Info2013-05-03PDF 3 MB
SAR Simulation Report 18 - AZ492FT4904 pt2RF Exposure Info2013-05-03PDF 3 MB
SAR Simulation Report 19 - AZ492FT7044 pt1RF Exposure Info2013-05-03PDF 3 MB
SAR Simulation Report 2 - AZ492FT3824RF Exposure Info2013-05-03PDF 3.2 MB
SAR Simulation Report 20 - AZ492FT7044 pt2RF Exposure Info2013-05-03PDF 3.3 MB
SAR Simulation Report 21 - AZ492FT7035 pt1RF Exposure Info2013-05-03PDF 2.5 MB
SAR Simulation Report 22 - AZ492FT7035 pt2RF Exposure Info2013-05-03PDF 3.3 MB
SAR Simulation Report 23 - AZ492FT7037 pt1RF Exposure Info2013-05-03PDF 2.7 MB
SAR Simulation Report 24 - AZ492FT7037 pt2RF Exposure Info2013-05-03PDF 3.3 MB
SAR Simulation Report 3 - AZ492FT4894RF Exposure Info2013-05-03PDF 3 MB
SAR Simulation Report 4 - AZ492FT4897RF Exposure Info2013-05-03PDF 3 MB
SAR Simulation Report 5 - AZ492FT4898 pt1RF Exposure Info2013-05-03PDF 2.6 MB
SAR Simulation Report 6 - AZ492FT4898 pt2RF Exposure Info2013-05-03PDF 3 MB
SAR Simulation Report 7 - AZ492FT4895 pt1RF Exposure Info2013-05-03PDF 2.7 MB
SAR Simulation Report 8 - AZ492FT4895 pt2RF Exposure Info2013-05-03PDF 3 MB
SAR Simulation Report 9 - AZ492FT5858RF Exposure Info2013-05-03PDF 3.3 MB
MPE REPORT 1RF Exposure Info2007-07-27PDF 2 MB
MPE REPORT 2RF Exposure Info2007-07-27PDF 3.3 MB
rf exposure infoRF Exposure Info2006-09-06PDF 114.3 KB
MPE Calculation - excerpt from main reptRF Exposure Info2006-06-05PDF 209.7 KB
RF exposure - main reptRF Exposure Info2006-06-05PDF 1.9 MB
Revised MPE ReportRF Exposure Info2006-06-05PDF 1.6 MB
SAR Computational Analysis - excerpt from main reptRF Exposure Info2006-06-05PDF 722 KB
Validation of MPE RF Expo ResultsRF Exposure Info2006-06-05PDF 296.8 KB
BLOCK DIAGRAM Metadata onlyBlock DiagramPDF 16 KB
SCHEMATICS Metadata onlySchematicsPDF 92.2 KB
Schematics Metadata onlySchematicsPDF 40.3 KB
OPERATIONAL DESCRIPTION Metadata onlyOperational DescriptionPDF 23 KB
Response to FCC Inquiry Metadata onlyOperational DescriptionPDF 131.2 KB
PARTS LIST Metadata onlyParts List/Tune Up InfoPDF 36.8 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 28.7 KB
TUNE UP Metadata onlyParts List/Tune Up InfoPDF 63.2 KB

Application Information

Application IDiT8km8fg5/xCIDRJbrvKsQ==
Final Action Date2020-09-02
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009192436
ModelDVRSVHF
Frequency Range136-174 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionDVRS Vehicular Repeater
Responsible PartyTony Bombera, P. Engineer, tonyb@futurecom.com , 905-660-5548
AgentSharly Sharly Sharly, Ultratech Engineering Labs Inc., sharly@ultratech-labs.com , 905-829-1570
Test FirmTri Luu, UltraTech Engineering Labs Inc, tri@ultratech-labs.com , 905-829-1570
TCB Emailvic@ultratech-labs.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna. Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089. Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wifi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089. Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing. Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package. Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using antennas HAD4008A and HAD4009A for Mobexcom DVR VHF and HAF6010A and HAF6012A for Companion Mobile radio.. Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio [FCC ID: AZ492FT3826, with either APX4500 (Model: M22KSS9PW1AN) or AXP2500 (Model: M24KSS9PW1AN)], using various combinations of antennas as documented in the filing. Class II permissive change for a change of connectors, enclosure, screws as mentioned in the filing.

Applications

Application IDDatePurpose
iT8km8fg5/xCIDRJbrvKsQ==2020-09-02Class II permissive change or modification of presently authorized equipment
/1LfGIDc6jbqUO1VcjRYUg==2020-05-11Class II permissive change or modification of presently authorized equipment
y9DKfJbkYmfcP1hPDAfqeQ==2019-07-18Class II permissive change or modification of presently authorized equipment
ZXfxhWcva9Pw8sap2bxW0Q==2019-03-12Class II permissive change or modification of presently authorized equipment
g4MjYbZ6mwGVQ7j/XcNwug==2019-01-03Class II permissive change or modification of presently authorized equipment
Je7aMGCA2MnuEPxNaxTphA==2018-05-30Class II permissive change or modification of presently authorized equipment
9fo789mz7ZyZTOeh6datZw==2018-04-03Class II permissive change or modification of presently authorized equipment
/egIwa5Tquer9yYYWB1fnQ==2013-05-03Class II permissive change or modification of presently authorized equipment
r/2y6ytgA/xXI8JrPalhnw==2008-07-22Class II permissive change or modification of presently authorized equipment
FtYEEyh7Rs57NFZ7OzlrrA==2007-09-21Class II permissive change or modification of presently authorized equipment
ExlicPq7uWAme96OUU0PnQ==2007-07-27Class II permissive change or modification of presently authorized equipment
9ZBLRVCOVHxRVK9f306cUg==2006-09-06Class II permissive change or modification of presently authorized equipment
/n1kcSdXbgeSuTEwrWwrmg==2006-06-05Class II permissive change or modification of presently authorized equipment
5hjXrkgzIAU0+irXYIgj9Q==2004-12-20Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
136-174 MHz201.5ppm16K0F3E22, 74, 80, 9BC, EF
136-174 MHz11.5ppm16K0F3E9
136-174 MHz201.5ppm11K0F3E9BB
136-174 MHz201.5ppm16K0F3E9BC, EF
136-174 MHz201.5ppm11K0F3E9
136-174 MHz201.5ppm11K0F3E9BC, EF
136-174 MHz201.5ppm11K0F3E22, 74, 80, 9BC, EF
136-174 MHz201.5ppm16K0F3E9BB
136-174 MHz201.5ppm16K0F3E9
136-174 MHz201.5ppm8K10F1E22, 74, 80, 9BC, EF
136-174 MHz201.5ppm11K0F1E9BB
136-174 MHz201.5ppm8K10F1E9BC, EF
136-174 MHz201.5ppm11K0F1E9
136-174 MHz201.5ppm8K10F1D22, 74, 80, 9BC, EF
136-174 MHz201.5ppm16K0F1E9
136-174 MHz201.5ppm16K0F1E9BB
136-174 MHz201.5ppm8K10F1D9BC, EF
136-174 MHz11.5ppm11K0F3E9BB
136-174 MHz11.5ppm11K0F3E9
136-174 MHz11.5ppm16K0F3E9BB
136-174 MHz11.5ppm16K0F1E9
136-174 MHz11.5ppm11K0F1E9BB
136-174 MHz11.5ppm11K0F1E9
136-174 MHz11.5ppm16K0F1E90, 9BB
136-174 MHz11.5ppm16K0F1E9BB

Grants

TCB Grant - Application ZXfxhWcva9Pw8sap2bxW0Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 03/12/2019

Application Dated: 03/11/2019
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wifi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.

Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application ZXfxhWcva9Pw8sap2bxW0Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 03/12/2019

Application Dated: 03/11/2019
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wifi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.

Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application y9DKfJbkYmfcP1hPDAfqeQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 07/18/2019

Application Dated: 05/21/2019
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wifi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.

Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using antennas HAD4008A and HAD4009A for Mobexcom DVR VHF and HAF6010A and HAF6012A for Companion Mobile radio.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application y9DKfJbkYmfcP1hPDAfqeQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 07/18/2019

Application Dated: 05/21/2019
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wifi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.

Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using antennas HAD4008A and HAD4009A for Mobexcom DVR VHF and HAF6010A and HAF6012A for Companion Mobile radio.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application r/2y6ytgA/xXI8JrPalhnw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 07/22/2008

Application Dated: 07/22/2008
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output Power is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances of 82 cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. A waiver of 47 CFR 1.1310 and 2.1091(d) was applied as detailed in filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per mobile FCC ID as described in filings (57 W, 45 W, 35 W), and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to correct the emission designators 11K0F1E and 16K0F1E to 8K10F1E and 8K10F1D for 12.5 kHz channel spacing for digital modulation.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application r/2y6ytgA/xXI8JrPalhnw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 07/22/2008

Application Dated: 07/22/2008
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output Power is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances of 82 cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. A waiver of 47 CFR 1.1310 and 2.1091(d) was applied as detailed in filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per mobile FCC ID as described in filings (57 W, 45 W, 35 W), and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to correct the emission designators 11K0F1E and 16K0F1E to 8K10F1E and 8K10F1D for 12.5 kHz channel spacing for digital modulation.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application Je7aMGCA2MnuEPxNaxTphA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 05/30/2018

Application Dated: 05/08/2018
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR VHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wifi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application Je7aMGCA2MnuEPxNaxTphA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 05/30/2018

Application Dated: 05/08/2018
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR VHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wifi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application iT8km8fg5/xCIDRJbrvKsQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 09/02/2020

Application Dated: 09/02/2020
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: DVRS Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wifi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.

Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using antennas HAD4008A and HAD4009A for Mobexcom DVR VHF and HAF6010A and HAF6012A for Companion Mobile radio..

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio [FCC ID: AZ492FT3826, with either APX4500 (Model: M22KSS9PW1AN) or AXP2500 (Model: M24KSS9PW1AN)], using various combinations of antennas as documented in the filing.

Class II permissive change for a change of connectors, enclosure, screws as mentioned in the filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application iT8km8fg5/xCIDRJbrvKsQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 09/02/2020

Application Dated: 09/02/2020
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wifi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.

Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using antennas HAD4008A and HAD4009A for Mobexcom DVR VHF and HAF6010A and HAF6012A for Companion Mobile radio..

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio [FCC ID: AZ492FT3826, with either APX4500 (Model: M22KSS9PW1AN) or AXP2500 (Model: M24KSS9PW1AN)], using various combinations of antennas as documented in the filing.

Class II permissive change for a change of connectors, enclosure, screws as mentioned in the filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application g4MjYbZ6mwGVQ7j/XcNwug==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 01/03/2019

Application Dated: 12/11/2018
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR VHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wifi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application g4MjYbZ6mwGVQ7j/XcNwug==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 01/03/2019

Application Dated: 12/11/2018
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR VHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wifi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application FtYEEyh7Rs57NFZ7OzlrrA==

This application does not exist.

EAS Grant - Application FtYEEyh7Rs57NFZ7OzlrrA==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 09/21/2007

Application Dated: 08/03/2007
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
90 136.0  -  174.0 20.0 1.5  PM 11K0F1E
90 136.0  -  174.0 20.0 1.5  PM 16K0F1E
90 136.0  -  174.0 1.0 1.5  PM 11K0F3E
90 136.0  -  174.0 1.0 1.5  PM 16K0F3E
90 136.0  -  174.0 1.0 1.5  PM 11K0F1E
90 136.0  -  174.0 1.0 1.5  PM 16K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances of 82 cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. A waiver of 47 CFR 1.1310 and 2.1091(d) was applied as detailed in filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per mobile FCC ID as described in filings (57 W, 45 W, 35 W), and the DVRS is limited to 6 W conducted power into DVRS antenna.



TCB Grant - Application ExlicPq7uWAme96OUU0PnQ==

Mail To:
Tri Luu, VP-Engineering
Ultratech Engineering Labs Inc
3000 Bristol Circle
Oakville, L6H 6G4
Canada
TCB GRANT OF EQUIPMENT
AUTHORIZATION 		TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 07/27/2007

Application Dated: 07/27/2007
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BB 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BB 90 136.0  -  174.0 20.0 1.5  PM 11K0F1E
BB 90 136.0  -  174.0 20.0 1.5  PM 16K0F1E
BB 90 136.0  -  174.0 1.0 1.5  PM 11K0F3E
BB 90 136.0  -  174.0 1.0 1.5  PM 16K0F3E
BB 90 136.0  -  174.0 1.0 1.5  PM 11K0F1E
BB 90 136.0  -  174.0 1.0 1.5  PM 16K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population /RF Exposure separation distances of 82 cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Grant: 06/05/2006) Class II Change: Adds new MPE requirements. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs AZ492FT4867, AZ492FT5823 was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited to 45/35 W respectively (for AZ492FT4867 and AZ492FT5823),and the DVRS is limited to 6 W conducted power into DVRS antenna.

BB: Power output continuously variable from value listed to less than 0.5 watts.

EAS Grant - Application ExlicPq7uWAme96OUU0PnQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION 		COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 07/27/2007

Application Dated: 07/27/2007
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BB 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BB 90 136.0  -  174.0 20.0 1.5  PM 11K0F1E
BB 90 136.0  -  174.0 20.0 1.5  PM 16K0F1E
BB 90 136.0  -  174.0 1.0 1.5  PM 11K0F3E
BB 90 136.0  -  174.0 1.0 1.5  PM 16K0F3E
BB 90 136.0  -  174.0 1.0 1.5  PM 11K0F1E
BB 90 136.0  -  174.0 1.0 1.5  PM 16K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population /RF Exposure separation distances of 82 cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Grant: 06/05/2006) Class II Change: Adds new MPE requirements. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs AZ492FT4867, AZ492FT5823 was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited to 45/35 W respectively (for AZ492FT4867 and AZ492FT5823),and the DVRS is limited to 6 W conducted power into DVRS antenna.


BB: Power output continuously variable from value listed to less than 0.5 watts.

Mail To:


EA275536

TCB Grant - Application 9ZBLRVCOVHxRVK9f306cUg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 09/06/2006

Application Dated: 09/06/2006
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BB 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BB 90 136.0  -  174.0 20.0 1.5  PM 11K0F1E
BB 90 136.0  -  174.0 20.0 1.5  PM 16K0F1E
BB 90 136.0  -  174.0 1.0 1.5  PM 11K0F3E
BB 90 136.0  -  174.0 1.0 1.5  PM 16K0F3E
BB 90 136.0  -  174.0 1.0 1.5  PM 11K0F1E
BB 90 136.0  -  174.0 1.0 1.5  PM 16K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population /RF Exposure separation distances of 82 cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (original grant notes)

This class 2 permissive change adds a new enclosure.


BB: Power output continuously variable from value listed to less than 0.5 watts.

EAS Grant - Application 9ZBLRVCOVHxRVK9f306cUg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 09/06/2006

Application Dated: 09/06/2006
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BB 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BB 90 136.0  -  174.0 20.0 1.5  PM 11K0F1E
BB 90 136.0  -  174.0 20.0 1.5  PM 16K0F1E
BB 90 136.0  -  174.0 1.0 1.5  PM 11K0F3E
BB 90 136.0  -  174.0 1.0 1.5  PM 16K0F3E
BB 90 136.0  -  174.0 1.0 1.5  PM 11K0F1E
BB 90 136.0  -  174.0 1.0 1.5  PM 16K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population /RF Exposure separation distances of 82 cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (original grant notes)

This class 2 permissive change adds a new enclosure.


BB: Power output continuously variable from value listed to less than 0.5 watts.

TCB Grant - Application 9fo789mz7ZyZTOeh6datZw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 04/03/2018

Application Dated: 06/27/2017
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application 9fo789mz7ZyZTOeh6datZw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 04/03/2018

Application Dated: 06/27/2017
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users’ manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application 5hjXrkgzIAU0+irXYIgj9Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 12/20/2004

Application Dated: 12/20/2004
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: VEHICULAR REPEATER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BB 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BB 90 136.0  -  174.0 20.0 1.5  PM 11K0F1E
BB 90 136.0  -  174.0 20.0 1.5  PM 16K0F1E
BB 90 136.0  -  174.0 1.0 1.5  PM 11K0F3E
BB 90 136.0  -  174.0 1.0 1.5  PM 16K0F3E
BB 90 136.0  -  174.0 1.0 1.5  PM 11K0F1E
90 136.0  -  174.0 1.0 1.5  PM 16K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population /RF Exposure separation distances of 82 cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

BB: Power output continuously variable from value listed to less than 0.5 watts.

EAS Grant - Application 5hjXrkgzIAU0+irXYIgj9Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 12/20/2004

Application Dated: 12/20/2004
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: VEHICULAR REPEATER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BB 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BB 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BB 90 136.0  -  174.0 20.0 1.5  PM 11K0F1E
BB 90 136.0  -  174.0 20.0 1.5  PM 16K0F1E
BB 90 136.0  -  174.0 1.0 1.5  PM 11K0F3E
BB 90 136.0  -  174.0 1.0 1.5  PM 16K0F3E
BB 90 136.0  -  174.0 1.0 1.5  PM 11K0F1E
90 136.0  -  174.0 1.0 1.5  PM 16K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population /RF Exposure separation distances of 82 cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


BB: Power output continuously variable from value listed to less than 0.5 watts.

TCB Grant - Application /n1kcSdXbgeSuTEwrWwrmg==

This application does not exist.

EAS Grant - Application /n1kcSdXbgeSuTEwrWwrmg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 06/05/2006

Application Dated: 01/27/2006
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVR VHF
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90 136.0  -  174.0 1.0 1.5  PM 16K0F3E
90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
90 136.0  -  174.0 20.0 1.5  PM 16K0F1E
90 136.0  -  174.0 20.0 1.5  PM 11K0F1E
90 136.0  -  174.0 1.0 1.5  PM 11K0F3E
90 136.0  -  174.0 1.0 1.5  PM 16K0F1E
90 136.0  -  174.0 1.0 1.5  PM 11K0F1E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population /RF Exposure separation distances of 82 cm as determined in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-Users must be provided with the specific training information. Use of any other antenna, other than the one supplied, will be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. A waiver of 47 CFR 1.1310 and 2.1091(d) as detailed in this filing was approved. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs AZ492FT3808, AZ492FT3806 was evaluated for passenger and bystander configurations as shown in this filing, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested for this filing, with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited to 57 W, and the DVRS is limited to 6 W conducted power into DVRS antenna.



TCB Grant - Application /egIwa5Tquer9yYYWB1fnQ==

This application does not exist.

EAS Grant - Application /egIwa5Tquer9yYYWB1fnQ==

Mail To:
Tri Luu, VP - Engineering
Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville, L6H 6G4
Canada
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 05/03/2013

Application Dated: 12/24/2012
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application /1LfGIDc6jbqUO1VcjRYUg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 05/11/2020

Application Dated: 02/05/2020
Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wifi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.

Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using antennas HAD4008A and HAD4009A for Mobexcom DVR VHF and HAF6010A and HAF6012A for Companion Mobile radio.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio [FCC ID: AZ492FT3826, with either APX4500 (Model: M22KSS9PW1AN) or APX2500 (Model: M24KSS9PW1AN)], using various combinations of antennas as documented in the filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application /1LfGIDc6jbqUO1VcjRYUg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Futurecom Systems Group ULC.
3277 Langstaff Road
Concord Ontario, L4K 5P8
Canada 		  Date of Grant: 05/11/2020

Application Dated: 02/05/2020
 
Attention: Tony Bombera , P. Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LO6-DVRSVHF
Name of Grantee:  Futurecom Systems Group ULC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBEXCOM DVRS Vehicular Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 16K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 11K0F3E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1E
BC EF 22, 74, 80, 90 136.0  -  174.0 20.0 1.5  PM 8K10F1D

Output power listed is conducted. This device must be restricted for work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum General Population / RF Exposure separation distances as described in filings under this FCC ID. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. End-users must be provided with the specific training information. Use of any other antenna, other than the one supplied, must be addressed at the time of licensing. The installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is certified to operate only with the antennas and installation configurations described and tested for filings under this FCC ID. MPE compliance for specific transmitters and collocated conditions for operation with FCC IDs described in filings under this FCC ID was evaluated for specific passenger and bystander configurations, and requires a separation distance of at least 90 cm from the vehicle body. This transmitter is certified to operate with the antennas and installation configurations tested in filings under this FCC ID with companion mobile radio operating in push-to-talk mode with a duty factor not exceeding 50%; power for companion mobile must be limited per FCC ID as described in the applicable filings, and the DVRS is limited to 6 W conducted power into DVRS antenna.

Class II Permissive Change to certify minimum separation distances from the car for bystanders, and from the DVR antenna for passengers to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF and Motorola VHF, UHF, 700 MHz and 800 MHz digital mobile radios (with Bluetooth and Wifi) and specific antennas are intended to be used as a package and transmits simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II Permissive Change (Phase 2) to certify minimum separation distances from the DVR antennas to a person to satisfy FCC RF Exposure requirements as specified in the users manual and MPE test reports, when Mobexcom DVR VHF is interfaced with Motorola VHF, UHF, 700 MHz, 800 MHz digital mobile radios, Bluetooth and Wifi with specific antennas, and are intended to transmit simultaneously. MPE measurements and SAR Computation were performed on MOBEXCOM DVR VHF and these mobile radios authorized under FCC ID: AZ492FT7089.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas as documented in the filing.

Class II Permissive Change for a change of the RF transistor from a through hole package to a surface mount package.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced and transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using antennas HAD4008A and HAD4009A for Mobexcom DVR VHF and HAF6010A and HAF6012A for Companion Mobile radio.

Class II permissive change to address RF exposure condition of MOBEXCOM DVRS VHF interfaced with, and transmitting simultaneously with Companion Mobile radio [FCC ID: AZ492FT3826, with either APX4500 (Model: M22KSS9PW1AN) or APX2500 (Model: M24KSS9PW1AN)], using various combinations of antennas as documented in the filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To: