FCC ID LYHIWPBV2

Wireless LAN to PROFIbus Interface

by Siemens AG

Grantee Code: LYH   Product Code: IWPBV2
Latest application date: 2008-03-27

FCC ID Device Details

FCC IDLYHIWPBV2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLYH
Product CodeIWPBV2
Applicant BusinessSiemens AG 🇩🇪
Related Domains siemens.com mikes-tp.com
Equipment ClassWireless LAN to PROFIbus Interface
Test FirmCSA Group Bayern GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2008-03-27
5180-5240 MHzOriginal Equipment2008-03-27

Exhibits

DocumentTypeAvailableFile
User Manual StatementUsers Manual2008-03-27PDF 36.2 KB
Users ManualUsers Manual2008-03-27PDF 595.5 KB
Internal PhotosInternal Photos2008-03-27PDF 773 KB
External PhotosExternal Photos2008-03-27PDF 773 KB
LabelID Label/Location Info2008-03-27PDF 107.1 KB
Test Setup PhotosTest Setup Photos2008-03-27PDF 834.6 KB
Test ReportTest Report2008-03-27PDF 1.2 MB
Test ReportTest Report2008-03-27PDF 1.5 MB
Authorization LetterCover Letter(s)2008-03-27PDF 15.1 KB
FCC declarationsCover Letter(s)2008-03-27PDF 44 KB
Request for ConfidentialityCover Letter(s)2008-03-27PDF 30.1 KB
UNII StatementCover Letter(s)2008-03-27PDF 339 KB
Antenna PhotosParts List/Tune Up Info2008-03-27PDF 1.2 MB
Antennan 1Parts List/Tune Up Info2008-03-27PDF 262.1 KB
Antennan 10Parts List/Tune Up Info2008-03-27PDF 672.7 KB
Antennan 2Parts List/Tune Up Info2008-03-27PDF 502.4 KB
Antennan 3Parts List/Tune Up Info2008-03-27PDF 629.8 KB
Antennan 4Parts List/Tune Up Info2008-03-27PDF 242.6 KB
Antennan 5Parts List/Tune Up Info2008-03-27PDF 476.5 KB
Antennan 6Parts List/Tune Up Info2008-03-27PDF 677.9 KB
Antennan 7Parts List/Tune Up Info2008-03-27PDF 600.6 KB
Antennan 8Parts List/Tune Up Info2008-03-27PDF 560.2 KB
Antennan 9Parts List/Tune Up Info2008-03-27PDF 1.7 MB
MPERF Exposure Info2008-03-27PDF 118 KB

Application Information

Application IDg4R26yqmn1j5EwqJVpUjcg==
Final Action Date2008-03-27
Application PurposeOriginal Equipment
Applicant FRN0014620876
ModelIWPBV2
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless LAN to PROFIbus Interface
Responsible PartyHans-Juergen Hensel, Dept: I IA AS RD ST Type Test, hans-juergen.hensel@siemens.com , +49 721 595
Technical ContactThomas Ring, Mikes-testingpartners gmbh, Thomas.Ring@mikes-tp.com , 49 9424 9481 214
Non-Technical ContactThomas Ring, Mikes-testingpartners gmbh, Thomas.Ring@mikes-tp.com , 49 9424 9481 214
Test FirmThomas Weise, CSA Group Bayern GmbH, thomas.weise@csagroup.org , 49-9424-9481-150
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. Professional installation is required. The antennas for this device must be installed to provide a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for power limitation and satisfying RF exposure compliance.

Applications

Application IDDatePurpose
g4R26yqmn1j5EwqJVpUjcg==2008-03-27Original Equipment
8qRzcE2UwBxf2r7LxmMYOA==2008-03-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.14115C36, CC
5180-5240 MHz0.033000015E36, CC
5745-5825 MHz0.16215C36, CC

Grants

TCB Grant - Application g4R26yqmn1j5EwqJVpUjcg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/27/2008

Application Dated: 03/27/2008
Siemens AG
Industry Sector Industry Automation Division
Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
 
Attention: Hans-Juergen Hensel , Dept: I IA AS RD ST Type Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHIWPBV2
Name of Grantee:  Siemens AG
Equipment Class: Digital Transmission System
Notes: Wireless LAN to PROFIbus Interface
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2412.0  -  2462.0 0.141  
36 CC 15C 5745.0  -  5825.0 0.162  

Power output listed is conducted. Professional installation is required. The antennas for this device must be installed to provide a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for power limitation and satisfying RF exposure compliance.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application g4R26yqmn1j5EwqJVpUjcg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens AG
Industry Sector Industry Automation Division Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
  Date of Grant: 03/27/2008

Application Dated: 03/27/2008
 
Attention: Hans-Juergen Hensel , Dept: I IA AS RD ST Type Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHIWPBV2
Name of Grantee:  Siemens AG
Equipment Class: Digital Transmission System
Notes: Wireless LAN to PROFIbus Interface
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2412.0  -  2462.0 0.141  
36 CC 15C 5745.0  -  5825.0 0.162  

Power output listed is conducted. Professional installation is required. The antennas for this device must be installed to provide a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for power limitation and satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8qRzcE2UwBxf2r7LxmMYOA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/27/2008

Application Dated: 03/27/2008
Siemens AG
Industry Sector Industry Automation Division
Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
 
Attention: Hans-Juergen Hensel , Dept: I IA AS RD ST Type Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHIWPBV2
Name of Grantee:  Siemens AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN to PROFIbus Interface
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15E 5180.0  -  5240.0 0.033  

Power output listed is conducted. Professional installation is required. Operation in the band 5.15~5.25GHz is restricted to indoor use only. The antennas for this device must be installed to provide a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for power limitation and satisfying RF exposure compliance.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8qRzcE2UwBxf2r7LxmMYOA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens AG
Industry Sector Industry Automation Division Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
  Date of Grant: 03/27/2008

Application Dated: 03/27/2008
 
Attention: Hans-Juergen Hensel , Dept: I IA AS RD ST Type Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHIWPBV2
Name of Grantee:  Siemens AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN to PROFIbus Interface
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15E 5180.0  -  5240.0 0.033  

Power output listed is conducted. Professional installation is required. Operation in the band 5.15~5.25GHz is restricted to indoor use only. The antennas for this device must be installed to provide a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for power limitation and satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: