FCC ID LYHMPCIE1V1

WLAN N-Module

by Siemens AG

Grantee Code: LYH   Product Code: MPCIE1V1
Latest application date: 2017-09-16

Device Images

FCC ID Device Details

FCC IDLYHMPCIE1V1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLYH
Product CodeMPCIE1V1
Applicant BusinessSiemens AG 🇩🇪
Related Domains siemens.com
Equipment ClassWLAN N-Module
Test FirmCSA Group Bayern GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-09-16
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-06-15
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-06-15
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2013-12-12
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2012-10-25
2412-2462 MHzOriginal Equipment2012-06-13
5180-5240 MHzOriginal Equipment2012-06-13

Exhibits

DocumentTypeAvailableFile
Installation GuideUsers Manual2017-09-16PDF 996.8 KB
Installation GuideUsers Manual2016-06-15PDF 1.7 MB
User ManualUsers Manual2012-06-13PDF 318.9 KB
Internal PhotosInternal Photos2016-06-15PDF 843.3 KB
Internal PhotosInternal Photos2012-06-13PDF 854.1 KB
External PhotosExternal Photos2016-06-15PDF 801.7 KB
External PhotosExternal Photos2012-06-13PDF 1.1 MB
Product LabelID Label/Location Info2016-06-15PDF 441.5 KB
Label EAPN_WS FamilyID Label/Location Info2013-12-12PDF 606 KB
Label RAPN FamilyID Label/Location Info2013-12-12PDF 818.6 KB
ID LabelID Label/Location Info2012-06-13PDF 441.5 KB
Test Setup PhotosTest Setup Photos2017-09-16PDF 222 KB
Test Setup PhotosTest Setup Photos2016-06-15PDF 597.8 KB
Test Setup PhotosTest Setup Photos2012-06-13PDF 1 MB
Test ReportTest Report2017-09-16PDF 2.7 MB
Test Report - Part 01Test Report2016-06-15PDF 3.5 MB
Test Report - Part 02Test Report2016-06-15PDF 4 MB
Test Report U-NII 1Test Report2016-06-15PDF 3.8 MB
Test Report U-NII 2ATest Report2016-06-15PDF 2.6 MB
Test Report U-NII 2CTest Report2016-06-15PDF 980.1 KB
Test Report U-NII 3Test Report2016-06-15PDF 2.6 MB
Mikes reportTest Report2013-12-12PDF 3.6 MB
UL report 1Test Report2013-12-12PDF 2.1 MB
UL report 2Test Report2013-12-12PDF 1.3 MB
UL report 3Test Report2013-12-12PDF 1.3 MB
UL report 4Test Report2013-12-12PDF 1.3 MB
Test ReportTest Report2012-10-25PDF 1.6 MB
Radiated test data Restricted band 4500-5150MHzTest Report2012-06-13PDF 1.6 MB
Test ReportTest Report2012-06-13PDF 4.3 MB
SW AttestationAttestation Statements2016-06-15PDF 191.3 KB
Testing AttestationAttestation Statements2016-06-15PDF 69.2 KB
Agent AuthorizationCover Letter(s)2017-09-16PDF 60.7 KB
C2PC Cover LetterCover Letter(s)2017-09-16PDF 56.5 KB
Request for ConfidentialityCover Letter(s)2017-09-16PDF 335.7 KB
Authorization LetterCover Letter(s)2016-06-15PDF 950.8 KB
C2PC Cover LetterCover Letter(s)2016-06-15PDF 364 KB
C2PC Cover LetterCover Letter(s)2016-06-15PDF 143.1 KB
Confidentiality letterCover Letter(s)2016-06-15PDF 117.1 KB
Declaration of FW LetterCover Letter(s)2016-06-15PDF 462.4 KB
Modular Approval LetterCover Letter(s)2016-06-15PDF 263.5 KB
PoA LetterCover Letter(s)2016-06-15PDF 260.2 KB
Request for ConfidentialityCover Letter(s)2016-06-15PDF 154.3 KB
TCB Address Change LetterCover Letter(s)2016-06-15PDF 11.2 KB
Agent Authorization LetterCover Letter(s)2013-12-12PDF 35.3 KB
Class II Permissive Change LetterCover Letter(s)2013-12-12PDF 22.9 KB
LYHMPCIE1V1 Statement SiemensCover Letter(s)2013-12-12PDF 412.1 KB
Authorization LetterCover Letter(s)2012-10-25PDF 35.3 KB
FCC II change letterCover Letter(s)2012-10-25PDF 117 KB
Ad Hoc DeclarationCover Letter(s)2012-06-13PDF 33.2 KB
Conf Requ LetterCover Letter(s)2012-06-13PDF 297.1 KB
Declaration of Prof InstallationCover Letter(s)2012-06-13PDF 39.3 KB
Explanation for submission of additional dataCover Letter(s)2012-06-13PDF 194 KB
Letter for ModularCover Letter(s)2012-06-13PDF 468 KB
Prof InstallationCover Letter(s)2012-06-13PDF 39.3 KB
MPERF Exposure Info2012-06-13PDF 1.8 MB
Antenna Description ANT793-8DL Metadata onlyOperational DescriptionPDF 461.4 KB
Antenna Description ANT795-6MP Metadata onlyOperational DescriptionPDF 364.9 KB
Antenna Description ANT896-6MM Metadata onlyOperational DescriptionPDF 1.4 MB
Operational Description Metadata onlyOperational DescriptionPDF 980.8 KB
Software Security Description Metadata onlyOperational DescriptionPDF 151.8 KB
UNII Device SW Security Info v02 Metadata onlySDR Software/Security InfPDF 151.8 KB
UNII Device SW Security Information Metadata onlySDR Software/Security InfPDF 192.4 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 497.8 KB

Application Information

Application IDjFRalf/RrmAzlUxiThCUyQ==
Final Action Date2017-09-16
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0014620876
ModelMPCIE1V1
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWLAN N-Module
Responsible PartyChristian Funk, christian.funk@siemens.com , +4972166720616
AgentBettina Bettina Bettina, CSA Group Bayern GmbH, Bettina.Stangl@csagroup.org , 4994249481
Technical ContactHermann Smetana, CSA Group Bayern GmbH, Hermann.Smetana@csagroup.org , 4994249481
Test FirmThomas Weise, CSA Group Bayern GmbH, thomas.weise@csagroup.org , 49-9424-9481-150
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. Class II Permissive Change to add a new antenna and show compliance against emission limits of 15.407(b) after transition period.

Applications

Application IDDatePurpose
jFRalf/RrmAzlUxiThCUyQ==2017-09-16Class II permissive change or modification of presently authorized equipment
xWRCuAHGIhzl/JR1ASSkNA==2016-06-15Class II permissive change or modification of presently authorized equipment
lx1mPGdynb9TDlyNXzQrCw==2016-06-15Class II permissive change or modification of presently authorized equipment
bG1NT4Z1lfjmdLpIR6sGIw==2013-12-12Class II permissive change or modification of presently authorized equipment
a5cTLyqM+tX7UYNzmErVIw==2012-10-25Class II permissive change or modification of presently authorized equipment
x8I18PWCccR4oUTkx/xlMw==2012-06-13Original Equipment
4TBcaKTIPZIA95BdtUsMhg==2012-06-13Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.0933315C36, CC, MO
2412-2462 MHz0.0933315CCC, MO
2422-2452 MHz0.0851115C36, CC, MO
2422-2452 MHz0.0851115CCC, MO
5180-5240 MHz0.0407415E38, CC, MO
5180-5240 MHz0.0407415E39, CC, MO
5180-5240 MHz0.0363115ECC, MO
5180-5240 MHz0.0407415ECC, MO
5190-5230 MHz0.0407415ECC, MO
5260-5320 MHz0.0338815E38, CC, MO
5260-5320 MHz0.0338815E39, CC, MO
5260-5320 MHz0.0338815ECC, MO
5500-5700 MHz0.030215E38, CC, MO
5500-5580 MHz0.030215E39, CC, MO
5500-5580 MHz0.030215ECC, MO
5580-5700 MHz0.030215E39, CC, MO
5580-5700 MHz0.030215ECC, MO
5745-5825 MHz0.0549515C36, CC, MO
5745-5825 MHz0.0549515CCC, MO
5745-5825 MHz0.0676115E38, CC, MO
5755-5795 MHz0.0676115C36, CC, MO
5755-5795 MHz0.0676115CCC, MO

Grants

TCB Grant - Application xWRCuAHGIhzl/JR1ASSkNA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/15/2016

Application Dated: 06/15/2016
Siemens AG
Type Test Center Karlsruhe
Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
 
Attention: Christian Funk

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHMPCIE1V1
Name of Grantee:  Siemens AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN N-Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.04074  
38 CC MO 15E 5260.0  -  5320.0 0.03388  
38 CC MO 15E 5500.0  -  5700.0 0.0302  
38 CC MO 15E 5745.0  -  5825.0 0.06761  

Single Modular Approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode.

Class II Permissive Change to ensure compliance to the new U-NII rules as modified by MO&O FCC 16-24.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application xWRCuAHGIhzl/JR1ASSkNA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens AG
Type Test Center Karlsruhe Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
  Date of Grant: 06/15/2016

Application Dated: 06/15/2016
 
Attention: Christian Funk

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHMPCIE1V1
Name of Grantee:  Siemens AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN N-Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.04074  
38 CC MO 15E 5260.0  -  5320.0 0.03388  
38 CC MO 15E 5500.0  -  5700.0 0.0302  
38 CC MO 15E 5745.0  -  5825.0 0.06761  

Single Modular Approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode.

Class II Permissive Change to ensure compliance to the new U-NII rules as modified by MO&O FCC 16-24.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application x8I18PWCccR4oUTkx/xlMw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/13/2012

Application Dated: 06/13/2012
Siemens AG
Industry Sector Industry Automation Division
Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
 
Attention: Hans-Juergen Hensel , Dept: I IA AS RD ST Type Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHMPCIE1V1
Name of Grantee:  Siemens AG
Equipment Class: Digital Transmission System
Notes: WLAN N-Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.09333  
CC MO 15C 2422.0  -  2452.0 0.08511  
CC MO 15C 5745.0  -  5825.0 0.05495  
CC MO 15C 5755.0  -  5795.0 0.06761  

Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application x8I18PWCccR4oUTkx/xlMw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens AG
Industry Sector Industry Automation Division Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
  Date of Grant: 06/13/2012

Application Dated: 06/13/2012
 
Attention: Hans-Juergen Hensel , Dept: I IA AS RD ST Type Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHMPCIE1V1
Name of Grantee:  Siemens AG
Equipment Class: Digital Transmission System
Notes: WLAN N-Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.09333  
CC MO 15C 2422.0  -  2452.0 0.08511  
CC MO 15C 5745.0  -  5825.0 0.05495  
CC MO 15C 5755.0  -  5795.0 0.06761  

Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application lx1mPGdynb9TDlyNXzQrCw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL International (UK) Ltd
Unit 1 - 3 Horizon Kingsland Business Park Wade Road
Basingstoke, RG24 8AH
United Kingdom
Date of Grant: 06/15/2016

Application Dated: 05/19/2016
Siemens AG
Type Test Center Karlsruhe
Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
 
Attention: Christian Funk

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHMPCIE1V1
Name of Grantee:  Siemens AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN N-Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
39 CC MO 15E 5180.0  -  5240.0 0.04074  
39 CC MO 15E 5260.0  -  5320.0 0.03388  
39 CC MO 15E 5500.0  -  5580.0 0.0302  
39 CC MO 15E 5580.0  -  5700.0 0.0302  

Modular approval. Output power listed is conducted. This device has 20 MHz and 40 MHz BW modes. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. 5.15-5.25 GHz is for indoor use only.

Class II Permissive Change to UNII bands 1, 2a and 2c to ensure compliance to the updated U-NII rules as detailed within this filing.


39: This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application lx1mPGdynb9TDlyNXzQrCw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens AG
Type Test Center Karlsruhe Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
  Date of Grant: 06/15/2016

Application Dated: 05/19/2016
 
Attention: Christian Funk

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHMPCIE1V1
Name of Grantee:  Siemens AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN N-Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
39 CC MO 15E 5180.0  -  5240.0 0.04074  
39 CC MO 15E 5260.0  -  5320.0 0.03388  
39 CC MO 15E 5500.0  -  5580.0 0.0302  
39 CC MO 15E 5580.0  -  5700.0 0.0302  

Modular approval. Output power listed is conducted. This device has 20 MHz and 40 MHz BW modes. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. 5.15-5.25 GHz is for indoor use only.

Class II Permissive Change to UNII bands 1, 2a and 2c to ensure compliance to the updated U-NII rules as detailed within this filing.


39: This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application jFRalf/RrmAzlUxiThCUyQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/16/2017

Application Dated: 09/12/2017
Siemens AG
Type Test Center Karlsruhe
Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
 
Attention: Christian Funk

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHMPCIE1V1
Name of Grantee:  Siemens AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN N-Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.04074  
38 CC MO 15E 5260.0  -  5320.0 0.03388  
38 CC MO 15E 5500.0  -  5700.0 0.0302  
38 CC MO 15E 5745.0  -  5825.0 0.06761  

Single Modular Approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode.

Class II Permissive Change to add a new antenna and show compliance against emission limits of 15.407(b) after transition period.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jFRalf/RrmAzlUxiThCUyQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens AG
Type Test Center Karlsruhe Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
  Date of Grant: 09/16/2017

Application Dated: 09/12/2017
 
Attention: Christian Funk

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHMPCIE1V1
Name of Grantee:  Siemens AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN N-Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.04074  
38 CC MO 15E 5260.0  -  5320.0 0.03388  
38 CC MO 15E 5500.0  -  5700.0 0.0302  
38 CC MO 15E 5745.0  -  5825.0 0.06761  

Single Modular Approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode.

Class II Permissive Change to add a new antenna and show compliance against emission limits of 15.407(b) after transition period.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application bG1NT4Z1lfjmdLpIR6sGIw==

This application does not exist.

EAS Grant - Application bG1NT4Z1lfjmdLpIR6sGIw==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens AG
Process Industries and Drives Division Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
  Date of Grant: 12/12/2013

Application Dated: 09/09/2013
 
Attention: Hans-Juergen Hensel , DF FA SE DS EMC 3

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHMPCIE1V1
Name of Grantee:  Siemens AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN N-Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.04074  
CC MO 15E 5260.0  -  5320.0 0.03388  
CC MO 15E 5500.0  -  5580.0 0.0302  
CC MO 15E 5580.0  -  5700.0 0.0302  

Modular approval. Output power listed is conducted. This device has 20 MHz and 40 MHz BW modes. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. 5.15-5.25 GHz is for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application a5cTLyqM+tX7UYNzmErVIw==

Mail To:
Thomas Ring,
mikes-testingpartners gmbh
Ohmstrasse 2-4
Strasskirchen, 94342
Germany
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 10/25/2012

Application Dated: 10/25/2012
Siemens AG
Industry Sector Industry Automation Division
Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
 
Attention: Hans-Juergen Hensel , Dept: I IA AS RD ST Type Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHMPCIE1V1
Name of Grantee:  Siemens AG
Equipment Class: Digital Transmission System
Notes: WLAN N-Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC MO 15C 2412.0  -  2462.0 0.09333  
36 CC MO 15C 2422.0  -  2452.0 0.08511  
36 CC MO 15C 5745.0  -  5825.0 0.05495  
36 CC MO 15C 5755.0  -  5795.0 0.06761  

Class II permissive change to add additional antennas as described in this filing.

Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application a5cTLyqM+tX7UYNzmErVIw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens AG
Industry Sector Industry Automation Division Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
  Date of Grant: 10/25/2012

Application Dated: 10/25/2012
 
Attention: Hans-Juergen Hensel , Dept: I IA AS RD ST Type Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHMPCIE1V1
Name of Grantee:  Siemens AG
Equipment Class: Digital Transmission System
Notes: WLAN N-Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC MO 15C 2412.0  -  2462.0 0.09333  
36 CC MO 15C 2422.0  -  2452.0 0.08511  
36 CC MO 15C 5745.0  -  5825.0 0.05495  
36 CC MO 15C 5755.0  -  5795.0 0.06761  

Class II permissive change to add additional antennas as described in this filing.

Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 4TBcaKTIPZIA95BdtUsMhg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/13/2012

Application Dated: 06/13/2012
Siemens AG
Industry Sector Industry Automation Division
Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
 
Attention: Hans-Juergen Hensel , Dept: I IA AS RD ST Type Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHMPCIE1V1
Name of Grantee:  Siemens AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN N-Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.03631  
CC MO 15E 5190.0  -  5230.0 0.04074  

Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 4TBcaKTIPZIA95BdtUsMhg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens AG
Industry Sector Industry Automation Division Oestliche Rheinbrueckenstr. 50
D-76181 Karlsruhe,
Germany
  Date of Grant: 06/13/2012

Application Dated: 06/13/2012
 
Attention: Hans-Juergen Hensel , Dept: I IA AS RD ST Type Test

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LYHMPCIE1V1
Name of Grantee:  Siemens AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN N-Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.03631  
CC MO 15E 5190.0  -  5230.0 0.04074  

Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: