FCC ID LYHW700-2-V1
2.4/5 GHz IEEE 802.11a/b/g WLAN Access Point
by Siemens AG
Grantee Code: LYH Product Code: W7002V1
Latest application date: 2006-09-28
FCC ID Device Details
| FCC ID | LYHW700-2-V1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | LYH |
| Product Code | W7002V1 |
| Applicant Business | Siemens AG 🇩🇪 |
| Related Domains |  siemens.com |
| Equipment Class | 2.4/5 GHz IEEE 802.11a/b/g WLAN Access Point |
| Test Firm | CTC advanced GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2006-09-28 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-03-18 |
| 5250-5350 MHz | Original Equipment | 2004-06-23 |
| 2412-2462 MHz | Original Equipment | 2004-06-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2004-06-23 | PDF 2.8 MB |
| Internal Photos | Internal Photos | 2004-06-23 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2004-06-23 | PDF 1.3 MB |
| External Photos | External Photos | 2005-03-18 | PDF 546.1 KB |
| External Photos | External Photos | 2004-06-23 | PDF 507.6 KB |
| External Photos | External Photos | 2004-06-23 | PDF 507.6 KB |
| Label | ID Label/Location Info | 2004-06-23 | PDF 197.7 KB |
| Test Setup Photos | Test Setup Photos | 2006-09-28 | PDF 862 KB |
| Test Setup Photos | Test Setup Photos | 2005-03-18 | PDF 284.8 KB |
| Test Setup Photos | Test Setup Photos | 2004-06-23 | PDF 480.3 KB |
| Test Setup Photos | Test Setup Photos | 2004-06-23 | PDF 383.4 KB |
| Test Report Part 1 | Test Report | 2006-09-28 | PDF 3.7 MB |
| Test Report Part 2 | Test Report | 2006-09-28 | PDF 2.7 MB |
| Test Report | Test Report | 2005-03-18 | PDF 1.1 MB |
| Test Report | Test Report | 2004-06-23 | PDF 2.9 MB |
| Test Report | Test Report | 2004-06-23 | PDF 3.6 MB |
| Cover Letter | Cover Letter(s) | 2006-09-28 | PDF 19.2 KB |
| PCII Request Letter | Cover Letter(s) | 2005-03-18 | PDF 30.4 KB |
| Confidentiality Request | Cover Letter(s) | 2004-06-23 | PDF 27.5 KB |
| Cover Letter | Cover Letter(s) | 2004-06-23 | PDF 49 KB |
| RF Exposure Info | RF Exposure Info | 2004-06-23 | PDF 29.7 KB |
| RF Exposure Info | RF Exposure Info | 2004-06-23 | PDF 58.3 KB |
| Block Diagram AP Metadata only | Block Diagram | PDF 142.3 KB | |
| Block Diagram RF Metadata only | Block Diagram | PDF 1 MB | |
| Circuit Diagram AP Metadata only | Schematics | PDF 319.6 KB | |
| Circuit Diagram RF Metadata only | Schematics | PDF 857.3 KB | |
| PCB AP Metadata only | Schematics | PDF 267.5 KB | |
| PCB RF Metadata only | Schematics | PDF 1.3 MB | |
| Operational Description AP Metadata only | Operational Description | PDF 350.5 KB | |
| Operational Description RF Metadata only | Operational Description | PDF 64.7 KB |
Application Information
| Application ID | egpDRJiWCqe+tiKjrL7bmA== |
|---|---|
| Final Action Date | 2006-09-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0014620876 |
| Model | W700-2-V1 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 2.4/5 GHz IEEE 802.11a/b/g WLAN Access Point |
| Responsible Party | Christian Funk, christian.funk@siemens.com , +4972166720616 |
| Test Firm | Gerald Schmidt, CTC advanced GmbH, mail@ctcadvanced.com  , 49-681-598-0 |
| TCB Email | gerald.schmidt@ict.cetecom.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | PCII to allow 5.15 – 5.25 GHz operation. This device must be professionally installed. Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) transition period. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| egpDRJiWCqe+tiKjrL7bmA== | 2006-09-28 | Class II permissive change or modification of presently authorized equipment |
| iTnLGR3hxuQfwRIMR8Uj/Q== | 2005-03-18 | Class II permissive change or modification of presently authorized equipment |
| ZkVeyYnxOpx7tjaozlLOPQ== | 2004-06-23 | Original Equipment |
| BDzFFB2QYpundbDq7Qs6/g== | 2004-06-23 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZkVeyYnxOpx7tjaozlLOPQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 06/23/2004 Application Dated: 06/23/2004 |
| Siemens AG |
| Type Test Center Karlsruhe |
| Oestliche Rheinbrueckenstr. 50 |
| D-76181 Karlsruhe, Germany |
| Attention: Christian Funk |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LYHW700-2-V1 |
| Name of Grantee: | Siemens AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2.4/5 GHz IEEE 802.11a/b/g WLAN Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC CE | 15E | 5250.0 - 5350.0 | 0.27 | ||
| 36 CC CE | 15E | 5725.0 - 5825.0 | 0.25 |
| This device must be professionally installed.Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application ZkVeyYnxOpx7tjaozlLOPQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Siemens AG Type Test Center Karlsruhe Oestliche Rheinbrueckenstr. 50 D-76181 Karlsruhe, Germany |
Date of Grant: 06/23/2004 Application Dated: 06/23/2004 |
| Attention: Christian Funk |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LYHW700-2-V1 |
| Name of Grantee: | Siemens AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2.4/5 GHz IEEE 802.11a/b/g WLAN Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC CE | 15E | 5250.0 - 5350.0 | 0.27 | ||
| 36 CC CE | 15E | 5725.0 - 5825.0 | 0.25 |
| This device must be professionally installed.Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 03/18/2005 Application Dated: 03/18/2005 |
| Siemens AG |
| Type Test Center Karlsruhe |
| Oestliche Rheinbrueckenstr. 50 |
| D-76181 Karlsruhe, Germany |
| Attention: Christian Funk |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LYHW700-2-V1 |
| Name of Grantee: | Siemens AG |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4/5 GHz IEEE 802.11a/b/g WLAN Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15C | 2412.0 - 2462.0 | 0.58 |
| PCII to adds two alternative antennas. This device must be professionally installed. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application iTnLGR3hxuQfwRIMR8Uj/Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Siemens AG Type Test Center Karlsruhe Oestliche Rheinbrueckenstr. 50 D-76181 Karlsruhe, Germany |
Date of Grant: 03/18/2005 Application Dated: 03/18/2005 |
| Attention: Christian Funk |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LYHW700-2-V1 |
| Name of Grantee: | Siemens AG |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4/5 GHz IEEE 802.11a/b/g WLAN Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15C | 2412.0 - 2462.0 | 0.58 |
| PCII to adds two alternative antennas. This device must be professionally installed. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 09/28/2006 Application Dated: 09/28/2006 |
| Siemens AG |
| Type Test Center Karlsruhe |
| Oestliche Rheinbrueckenstr. 50 |
| D-76181 Karlsruhe, Germany |
| Attention: Christian Funk |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LYHW700-2-V1 |
| Name of Grantee: | Siemens AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2.4/5 GHz IEEE 802.11a/b/g WLAN Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5180.0 - 5240.0 | 0.016 | ||
| 36 CC | 15E | 5260.0 - 5320.0 | 0.045 | ||
| 36 CC | 15E | 5745.0 - 5805.0 | 0.03 |
| PCII to allow 5.15 – 5.25 GHz operation. This device must be professionally installed. Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) transition period. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application egpDRJiWCqe+tiKjrL7bmA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Siemens AG Type Test Center Karlsruhe Oestliche Rheinbrueckenstr. 50 D-76181 Karlsruhe, Germany |
Date of Grant: 09/28/2006 Application Dated: 09/28/2006 |
| Attention: Christian Funk |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LYHW700-2-V1 |
| Name of Grantee: | Siemens AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2.4/5 GHz IEEE 802.11a/b/g WLAN Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5180.0 - 5240.0 | 0.016 | ||
| 36 CC | 15E | 5260.0 - 5320.0 | 0.045 | ||
| 36 CC | 15E | 5745.0 - 5805.0 | 0.03 |
| PCII to allow 5.15 – 5.25 GHz operation. This device must be professionally installed. Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) transition period. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 06/23/2004 Application Dated: 06/23/2004 |
| Siemens AG |
| Type Test Center Karlsruhe |
| Oestliche Rheinbrueckenstr. 50 |
| D-76181 Karlsruhe, Germany |
| Attention: Christian Funk |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LYHW700-2-V1 |
| Name of Grantee: | Siemens AG |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4/5 GHz IEEE 802.11a/b/g WLAN Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC CE | 15C | 2412.0 - 2462.0 | 0.58 |
| This device must be professionally installed.Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application BDzFFB2QYpundbDq7Qs6/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Siemens AG Type Test Center Karlsruhe Oestliche Rheinbrueckenstr. 50 D-76181 Karlsruhe, Germany |
Date of Grant: 06/23/2004 Application Dated: 06/23/2004 |
| Attention: Christian Funk |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LYHW700-2-V1 |
| Name of Grantee: | Siemens AG |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4/5 GHz IEEE 802.11a/b/g WLAN Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC CE | 15C | 2412.0 - 2462.0 | 0.58 |
| This device must be professionally installed.Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |