FCC ID M4Y-0AG621

802.11 a/b/g Mini PCI Card

by Z Com Inc

Grantee Code: M4Y   Product Code: 0AG621
Latest application date: 2006-04-26

FCC ID Device Details

FCC IDM4Y-0AG621
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeM4Y
Product Code0AG621
Applicant BusinessZ Com Inc 🇹🇼
Related Domains zcom.com.tw
Equipment Class802.11 a/b/g Mini PCI Card
Test FirmCompliance Certification Services Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2006-04-26
5180-5320 MHzOriginal Equipment2006-04-26

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2006-04-26PDF 2.4 MB
Internal PhotosInternal Photos2006-04-26PDF 420.6 KB
External PhotosExternal Photos2006-04-26PDF 236.6 KB
ID LabelID Label/Location Info2006-04-26PDF 70.3 KB
ID LabelID Label/Location Info2006-04-26PDF 14.8 KB
ID Label LocationID Label/Location Info2006-04-26PDF 70.3 KB
Test Setup PhotosTest Setup Photos2006-04-26PDF 203.1 KB
Test Setup PhotosTest Setup Photos2006-04-26PDF 1.1 MB
Test ReportTest Report2006-04-26PDF 1 MB
Test ReportTest Report2006-04-26PDF 608.7 KB
Authorization LetterCover Letter(s)2006-04-26PDF 160.1 KB
Modular Approval LetterCover Letter(s)2006-04-26PDF 14 KB
Request for ConfidentialityCover Letter(s)2006-04-26PDF 66.4 KB
TCB Q and ACover Letter(s)2006-04-26PDF 84.7 KB
AntennaParts List/Tune Up Info2006-04-26PDF 67.9 KB
RF ExposureRF Exposure Info2006-04-26PDF 103.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 27.3 KB
Schematics Metadata onlySchematicsPDF 130.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 14.2 KB

Application Information

Application IDeYXvJbD3ITKpBXJvpJ832A==
Final Action Date2006-04-26
Application PurposeOriginal Equipment
Applicant FRN0004281911
Model0AG621
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11 a/b/g Mini PCI Card
Responsible PartyJeff jiang, R&D; DIV Director, jeffjiang@zcom.com.tw , 886 3 577-7364
Test FirmPaul Liau, Compliance Certification Services Inc., pyla@itri.org.tw , 886-3-5915994
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Modular Approval. Power listed is highest conducted output power measured. Device must be tuned at the factory to the measured output power at low and high channel as documented in this filing . Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
eYXvJbD3ITKpBXJvpJ832A==2006-04-26Original Equipment
Q8V5jcF//JQmkfqTOAnepw==2006-04-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.5315CCC
5180-5320 MHz0.023300015ECC
5745-5825 MHz0.20215CCC

Grants

TCB Grant - Application Q8V5jcF//JQmkfqTOAnepw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/26/2006

Application Dated: 04/26/2006
Z Com Inc
5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK,
HSINCHU,TAIWAN
Hsinchu, 300
Taiwan
 
Attention: Jeff jiang , R&D DIV Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Y-0AG621
Name of Grantee:  Z Com Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Mini PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.0233  

Modular Approval. Modular Approval. Power listed is highest conducted output power measured. Device must be tuned at the factory to the measured output power at low and high channel as documented in this filing . Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

5.15-5.25 GHz operation is limited to indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Q8V5jcF//JQmkfqTOAnepw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Z Com Inc
5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK, HSINCHU,TAIWAN
Hsinchu, 300
Taiwan
  Date of Grant: 04/26/2006

Application Dated: 04/26/2006
 
Attention: Jeff jiang , R&D DIV Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Y-0AG621
Name of Grantee:  Z Com Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Mini PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.0233  

Modular Approval. Modular Approval. Power listed is highest conducted output power measured. Device must be tuned at the factory to the measured output power at low and high channel as documented in this filing . Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

5.15-5.25 GHz operation is limited to indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application eYXvJbD3ITKpBXJvpJ832A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/26/2006

Application Dated: 04/26/2006
Z Com Inc
5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK,
HSINCHU,TAIWAN
Hsinchu, 300
Taiwan
 
Attention: Jeff jiang , R&D DIV Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Y-0AG621
Name of Grantee:  Z Com Inc
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Mini PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.53  
CC 15C 5745.0  -  5825.0 0.202  

Modular Approval. Modular Approval. Power listed is highest conducted output power measured. Device must be tuned at the factory to the measured output power at low and high channel as documented in this filing . Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application eYXvJbD3ITKpBXJvpJ832A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Z Com Inc
5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK, HSINCHU,TAIWAN
Hsinchu, 300
Taiwan
  Date of Grant: 04/26/2006

Application Dated: 04/26/2006
 
Attention: Jeff jiang , R&D DIV Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Y-0AG621
Name of Grantee:  Z Com Inc
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Mini PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.53  
CC 15C 5745.0  -  5825.0 0.202  

Modular Approval. Modular Approval. Power listed is highest conducted output power measured. Device must be tuned at the factory to the measured output power at low and high channel as documented in this filing . Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: