FCC ID M4Y-AG623C

IEEE 802.11 a/b/g Wireless Network Mini PCI

by Z Com Inc

Grantee Code: M4Y   Product Code: AG623C
Latest application date: 2006-10-16

FCC ID Device Details

FCC IDM4Y-AG623C
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeM4Y
Product CodeAG623C
Applicant BusinessZ Com Inc 🇹🇼
Related Domains zcom.com.tw
Equipment ClassIEEE 802.11 a/b/g Wireless Network Mini PCI
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2006-10-16
2412-2462 MHzOriginal Equipment2006-10-15

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2006-10-16PDF 236.1 KB
Users ManualUsers Manual2006-10-15PDF 236.1 KB
Internal PhotoInternal Photos2006-10-16PDF 256 KB
External PhotoExternal Photos2006-10-16PDF 191 KB
Label InfoID Label/Location Info2006-10-16PDF 94 KB
Test Setup PhotosTest Setup Photos2006-10-16PDF 468.6 KB
Test ReportTest Report2006-10-16PDF 1.4 MB
Test ReportTest Report2006-10-15PDF 2.3 MB
Confidentiality Request LetterCover Letter(s)2006-10-16PDF 47.9 KB
LMA LetterCover Letter(s)2006-10-16PDF 29.3 KB
MPERF Exposure Info2006-10-16PDF 57.3 KB
MPERF Exposure Info2006-10-15PDF 58.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 32.9 KB
Schematics Metadata onlySchematicsPDF 102.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 46.4 KB

Application Information

Application IDJIFvbDCO9iZ6MutYR4aYEg==
Final Action Date2006-10-16
Application PurposeOriginal Equipment
Applicant FRN0004281911
ModelAG623C
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIEEE 802.11 a/b/g Wireless Network Mini PCI
Responsible PartyJeff jiang, R&D; DIV Director, jeffjiang@zcom.com.tw , 886 3 577-7364
Technical ContactWayne Hsu, Sporton International Inc., wayne@sporton.com.tw
Test FirmKathy Lin, Sporton International Inc., Kathy@sporton.com.tw , 886-2-2696-2468
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
JIFvbDCO9iZ6MutYR4aYEg==2006-10-16Original Equipment
KOCioPDVJvJcRM8fPyYoMQ==2006-10-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.15615CCC
5180-5240 MHz0.035000015ECC
5745-5825 MHz0.05715CCC

Grants

TCB Grant - Application KOCioPDVJvJcRM8fPyYoMQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 10/15/2006

Application Dated: 10/13/2006
Z Com Inc
5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK,
HSINCHU,TAIWAN
Hsinchu, 300
Taiwan
 
Attention: Jeff jiang , R&D DIV Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Y-AG623C
Name of Grantee:  Z Com Inc
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g Wireless Network Mini PCI
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.156  
CC 15C 5745.0  -  5825.0 0.057  

Limited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application KOCioPDVJvJcRM8fPyYoMQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Z Com Inc
5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK, HSINCHU,TAIWAN
Hsinchu, 300
Taiwan
  Date of Grant: 10/15/2006

Application Dated: 10/13/2006
 
Attention: Jeff jiang , R&D DIV Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Y-AG623C
Name of Grantee:  Z Com Inc
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g Wireless Network Mini PCI
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.156  
CC 15C 5745.0  -  5825.0 0.057  

Limited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application JIFvbDCO9iZ6MutYR4aYEg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 10/16/2006

Application Dated: 10/16/2006
Z Com Inc
5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK,
HSINCHU,TAIWAN
Hsinchu, 300
Taiwan
 
Attention: Jeff jiang , R&D DIV Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Y-AG623C
Name of Grantee:  Z Com Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g Wireless Network Mini PCI
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.035  

Limited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application JIFvbDCO9iZ6MutYR4aYEg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Z Com Inc
5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK, HSINCHU,TAIWAN
Hsinchu, 300
Taiwan
  Date of Grant: 10/16/2006

Application Dated: 10/16/2006
 
Attention: Jeff jiang , R&D DIV Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Y-AG623C
Name of Grantee:  Z Com Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g Wireless Network Mini PCI
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.035  

Limited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: