FCC ID M4Y-XG-300
IEEE 802.11b/g WLAN Cardbus Card
by Z Com Inc
Grantee Code: M4Y Product Code: XG300
Latest application date: 2004-03-02
FCC ID Device Details
| FCC ID | M4Y-XG-300 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | M4Y |
| Product Code | XG300 |
| Applicant Business | Z Com Inc 🇹🇼 |
| Related Domains |  zcom.com.tw |
| Equipment Class | IEEE 802.11b/g WLAN Cardbus Card |
| Test Firm | ECOM Sertech Corp. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-03-02 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-06-20 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-04-04 |
| 2412-2462 MHz | Original Equipment | 2003-02-04 |
| 2412-2462 MHz | Original Equipment | 2003-01-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Revised User Manual | Users Manual | 2003-02-04 | PDF 336.7 KB |
| User manual Metadata only | Users Manual | PDF 336.6 KB | |
| Interior photos | Internal Photos | 2003-02-04 | PDF 782.1 KB |
| Exterior photos | External Photos | 2003-02-04 | PDF 555.3 KB |
| Label information | ID Label/Location Info | 2003-02-04 | PDF 99.6 KB |
| Label info Metadata only | ID Label/Location Info | PDF 99.6 KB | |
| Test setup photos | Test Setup Photos | 2003-02-04 | PDF 601.7 KB |
| Test Report | Test Report | 2004-03-02 | PDF 763.5 KB |
| Revised SAR Test Report Metadata only | RF Exposure Info | 2003-06-20 | PDF 985.9 KB |
| SAR Test Report for new antenna Metadata only | RF Exposure Info | 2003-06-20 | PDF 374.9 KB |
| SAR Test Report revised | RF Exposure Info | 2003-06-20 | PDF 1,013.3 KB |
| Test Report | Test Report | 2003-06-20 | PDF 440.4 KB |
| Test Report | Test Report | 2003-04-04 | PDF 450.8 KB |
| Clarification on test report | Attestation Statements | 2003-02-04 | PDF 33.2 KB |
| Part 15 test report revised | Test Report | 2003-02-04 | PDF 785.3 KB |
| SAR calibration report | Test Report | 2003-02-04 | PDF 1.1 MB |
| SAR test report revised | Test Report | 2003-02-04 | PDF 2.5 MB |
| Part 15 test report Metadata only | Test Report | PDF 784.4 KB | |
| SAR test report Metadata only | Test Report | PDF 3.4 MB | |
| Test report usage statement Metadata only | Attestation Statements | PDF 98.1 KB | |
| Identical product statement | Attestation Statements | 2003-02-04 | PDF 261 KB |
| Testreport usage statement | Attestation Statements | 2003-02-04 | PDF 98.1 KB |
| Description of Changes | Cover Letter(s) | 2004-03-02 | PDF 39.8 KB |
| Description of Change | Cover Letter(s) | 2003-06-20 | PDF 72 KB |
| Application for Permissive Change | Cover Letter(s) | 2003-04-04 | PDF 33.2 KB |
| Application letter refiling | Cover Letter(s) | 2003-02-04 | PDF 63 KB |
| Authorization letter | Cover Letter(s) | 2003-02-04 | PDF 274.1 KB |
| Confidentiality request | Cover Letter(s) | 2003-02-04 | PDF 62 KB |
| Application letter | Cover Letter(s) | PDF 63 KB | |
| SAR Report | RF Exposure Info | 2004-03-02 | PDF 1.1 MB |
| Block diagram Metadata only | Block Diagram | PDF 4.7 KB | |
| Blockdiagram Metadata only | Block Diagram | PDF 4.7 KB | |
| Circuit diagrams Metadata only | Schematics | PDF 665.5 KB | |
| Operational description Metadata only | Operational Description | PDF 8.1 KB | |
| Bill of materials Metadata only | Parts List/Tune Up Info | PDF 27.5 KB |
Application Information
| Application ID | 4SzeI+7AH+KOZyU5LanTQg== |
|---|---|
| Final Action Date | 2004-03-02 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004281911 |
| Model | XG-300 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | IEEE 802.11b/g WLAN Cardbus Card |
| Responsible Party | Jeff jiang, R&D; DIV Director, jeffjiang@zcom.com.tw , 886 3 577-7364 |
| Test Firm | C. Wu, ECOM Sertech Corp., cfwu@itri.org.tw  , 88635917069 |
| TCB Email | kknoerig@emcc.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. SAR compliance has been established in a laptop computer configuration with side (near the rear) PCMCIA slot configuration as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The antenna(s) of the device must not be colocated or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 1.25 W/kg (Body) Class II Permissive Change. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 4SzeI+7AH+KOZyU5LanTQg== | 2004-03-02 | Class II permissive change or modification of presently authorized equipment |
| pnMCvet317bW1BwnEsF73w== | 2003-06-20 | Class II permissive change or modification of presently authorized equipment |
| oQfyIzEQq3lLU5f2JVbvdw== | 2003-04-04 | Class II permissive change or modification of presently authorized equipment |
| dWAM9Pf0z2jCQvgBg4gDsg== | 2003-02-04 | Original Equipment |
| 7v7VVsIeHeNmywx9A0HSlg== | 2003-01-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application pnMCvet317bW1BwnEsF73w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
EMCCons DR RASEK GmbH & Co. KG Stoernhofer Berg 15 Unterleinleiter, 91364 Germany |
Date of Grant: 06/20/2003 Application Dated: 06/20/2003 |
| Z Com Inc |
| 5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK, |
| HSINCHU,TAIWAN |
| Hsinchu, 300 Taiwan |
| Attention: Jeff jiang , R&D DIV Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | M4Y-XG-300 |
| Name of Grantee: | Z Com Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz IEEE 802.11g WLAN Cardbus Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.095 |
| With this Class II Permissive Change a new type of integral antenna is authorized. Power output listed is conducted. SAR compliance has been established in a laptop computer configuration with side (near the rear) PCMCIA slot configuration as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The antenna(s) of the device must not be colocated or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 1.25 W/kg (Body) |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application pnMCvet317bW1BwnEsF73w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Z Com Inc 5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK, HSINCHU,TAIWAN Hsinchu, 300 Taiwan |
Date of Grant: 06/20/2003 Application Dated: 06/20/2003 |
| Attention: Jeff jiang , R&D DIV Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | M4Y-XG-300 |
| Name of Grantee: | Z Com Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz IEEE 802.11g WLAN Cardbus Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.095 |
| With this Class II Permissive Change a new type of integral antenna is authorized. Power output listed is conducted. SAR compliance has been established in a laptop computer configuration with side (near the rear) PCMCIA slot configuration as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The antenna(s) of the device must not be colocated or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 1.25 W/kg (Body) |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
EMCCons DR RASEK GmbH & Co. KG Stoernhofer Berg 15 Unterleinleiter, 91364 Germany |
Date of Grant: 04/04/2003 Application Dated: 04/04/2003 |
| Z Com Inc |
| 5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK, |
| HSINCHU,TAIWAN |
| Hsinchu, 300 Taiwan |
| Attention: Jeff jiang , R&D DIV Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | M4Y-XG-300 |
| Name of Grantee: | Z Com Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz IEEE 802.11g WLAN Cardbus Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.095 |
| Power Output listed is Conducted. SAR compliance has been established in a laptop computer configuration with side (near the rear) PCMCIA slot configuration as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The antenna(s) of the device must not be colocated or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 0.6 W/kg (Body) |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application oQfyIzEQq3lLU5f2JVbvdw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Z Com Inc 5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK, HSINCHU,TAIWAN Hsinchu, 300 Taiwan |
Date of Grant: 04/04/2003 Application Dated: 04/04/2003 |
| Attention: Jeff jiang , R&D DIV Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | M4Y-XG-300 |
| Name of Grantee: | Z Com Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz IEEE 802.11g WLAN Cardbus Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.095 |
| Power Output listed is Conducted. SAR compliance has been established in a laptop computer configuration with side (near the rear) PCMCIA slot configuration as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The antenna(s) of the device must not be colocated or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 0.6 W/kg (Body) |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/04/2003 Application Dated: 02/04/2003 |
| Z Com Inc |
| 5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK, |
| HSINCHU,TAIWAN |
| Hsinchu, 300 Taiwan |
| Attention: Jeff jiang , R&D DIV Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | M4Y-XG-300 |
| Name of Grantee: | Z Com Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz IEEE 802.11g WLAN Cardbus Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.095 |
| Power listed is conducted. SAR compliance has been established in a laptop computer configuration with side (near the rear) PCMCIA slot configuration as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The antenna(s) of the device must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 0.6 W/kg (Body) |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application dWAM9Pf0z2jCQvgBg4gDsg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Z Com Inc 5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK, HSINCHU,TAIWAN Hsinchu, 300 Taiwan |
Date of Grant: 02/04/2003 Application Dated: 02/04/2003 |
| Attention: Jeff jiang , R&D DIV Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | M4Y-XG-300 |
| Name of Grantee: | Z Com Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz IEEE 802.11g WLAN Cardbus Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.095 |
| Power listed is conducted. SAR compliance has been established in a laptop computer configuration with side (near the rear) PCMCIA slot configuration as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The antenna(s) of the device must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 0.6 W/kg (Body) |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
EMCCons DR RASEK GmbH & Co. KG Stoernhofer Berg 15 Unterleinleiter, 91364 Germany |
Date of Grant: 03/02/2004 Application Dated: 03/02/2004 |
| Z Com Inc |
| 5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK, |
| HSINCHU,TAIWAN |
| Hsinchu, 300 Taiwan |
| Attention: Jeff jiang , R&D DIV Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | M4Y-XG-300 |
| Name of Grantee: | Z Com Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11b/g WLAN Cardbus Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.095 |
| Power output listed is conducted. SAR compliance has been established in a laptop computer configuration with side (near the rear) PCMCIA slot configuration as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The antenna(s) of the device must not be colocated or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 1.25 W/kg (Body) Class II Permissive Change. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application 4SzeI+7AH+KOZyU5LanTQg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Z Com Inc 5F, No.8 HSIN-ANN RD. HSINCHU SCIENCE PARK, HSINCHU,TAIWAN Hsinchu, 300 Taiwan |
Date of Grant: 03/02/2004 Application Dated: 03/02/2004 |
| Attention: Jeff jiang , R&D DIV Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | M4Y-XG-300 |
| Name of Grantee: | Z Com Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11b/g WLAN Cardbus Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.095 |
| Power output listed is conducted. SAR compliance has been established in a laptop computer configuration with side (near the rear) PCMCIA slot configuration as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The antenna(s) of the device must not be colocated or operating in conjunction with any other antenna or transmitter within a host device. Maximum measured SAR value: 1.25 W/kg (Body) Class II Permissive Change. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |