1. FCC ID
  2. M4Z
  3. M4Z6204

FCC ID M4Z6204

3M Toll RFID Reader

by 3M Traffic Safety Systems

Grantee Code: M4Z   Product Code: 6204
Latest application date: 2016-02-05

FCC ID Device Details

FCC IDM4Z6204
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeM4Z
Product Code6204
Applicant Business3M Traffic Safety Systems 🇺🇸
Related Domains mmm.com
Equipment Class3M Toll RFID Reader
Test Firm3M Company, Hardgoods Regulatory Engineering Lab

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.3-927.75 MHzClass II permissive change or modification of presently authorized equipment2016-02-05
902.75-903.25 MHzClass II permissive change or modification of presently authorized equipment2016-02-04
902.75-903.25 MHzClass II permissive change or modification of presently authorized equipment2015-01-27
902.3-927.75 MHzClass II permissive change or modification of presently authorized equipment2015-01-27
902.75-903.25 MHzOriginal Equipment2014-12-05
902.3-927.75 MHzOriginal Equipment2014-12-04

Exhibits

DocumentTypeAvailableFile
Users manualUsers Manual2014-12-05PDF 2.2 MB
User manualUsers Manual2014-12-04PDF 2.2 MB
Internal photosInternal Photos2014-12-05PDF 1.6 MB
External photosExternal Photos2014-12-05PDF 969.9 KB
Label and location infoID Label/Location Info2014-12-05PDF 534.9 KB
Test setup photosTest Setup Photos2014-12-04PDF 677.6 KB
Test ReportTest Report2016-02-05PDF 1.7 MB
Test reportTest Report2015-01-27PDF 4.2 MB
Test reportTest Report2014-12-05PDF 1.5 MB
Test reportTest Report2014-12-04PDF 2.3 MB
Cover letterCover Letter(s)2016-02-05PDF 16.9 KB
Class 2 PC Cover letterCover Letter(s)2015-01-27PDF 124.5 KB
Confidentiality requestCover Letter(s)2014-12-05PDF 64 KB
Authorization letterCover Letter(s)2014-12-04PDF 112.5 KB
Letter of agencyCover Letter(s)2014-12-04PDF 14.6 KB
RF Exposure calculationRF Exposure Info2016-02-05PDF 35.5 KB
RF Exposure infoRF Exposure Info2015-01-27PDF 35.1 KB
RF exposure evaluationRF Exposure Info2014-12-05PDF 34.8 KB
RF Exposure evaluationRF Exposure Info2014-12-04PDF 34.8 KB
Block diagram Metadata onlyBlock DiagramPDF 824.4 KB
Schematic Metadata onlySchematicsPDF 1.2 MB
Schematics Metadata onlySchematicsPDF 1.2 MB
Operational description Metadata onlyOperational DescriptionPDF 467.7 KB
Tune up info Metadata onlyParts List/Tune Up InfoPDF 112.2 KB

Application Information

Application IDGh2iAS7FqULWX28Yi1pk+Q==
Final Action Date2016-02-05
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005881040
Model6204
Frequency Range902.3-927.75 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device Description3M Toll RFID Reader
Responsible PartyRandal D. Roebuck, Manager, RFID Regulatory, RDRoebuck@mmm.com , 512-984-5688
Technical ContactYuriy Litvinov, 3M Product Safety EMC Laboratory, ylitvinov@mmm.com , 651-7378-6336
Test FirmYuriy Litvinov, 3M Company, Hardgoods Regulatory Engineering Lab, ylitvinov@mmm.com , 651-778-6336
TCB EmailTCB_Admin@intertek.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass 2 Permissive Change to add the new DSB-ASK modulation mode as documented in this filing. Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 100 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Professional installers must be provided with antenna installation instructions for compliance with FCC Rules and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
Gh2iAS7FqULWX28Yi1pk+Q==2016-02-05Class II permissive change or modification of presently authorized equipment
Y180BPrPbYOva6v9LMjHEw==2016-02-04Class II permissive change or modification of presently authorized equipment
kvXFFSMo4gWkRyxNyMptqQ==2015-01-27Class II permissive change or modification of presently authorized equipment
/4t9Mlhsxlv8QsdJsjb0hw==2015-01-27Class II permissive change or modification of presently authorized equipment
U5DqGjdhS6VxP7aD/CsHMg==2014-12-05Original Equipment
SzUIFN+MGbP7IKyEW/1Jyg==2014-12-04Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
902.3-927.75 MHz1.000000015C
902.75-903.25 MHz31ppm432KK1D90.353
902.75-903.25 MHz2.81ppm437KK1D90.353
910.95-920.45 MHz2.91ppm422KK1D90.353
910.95-920.45 MHz2.81ppm428KK1D90.353
911.75-919.25 MHz3.21ppm1M06K1D90.353
914.25-915.75 MHz2.51ppm758KK1D90.353

Grants

TCB Grant - Application Y180BPrPbYOva6v9LMjHEw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
 Date of Grant: 02/04/2016

Application Dated: 02/03/2016
3M Traffic Safety Systems
3M Center, Building 225-4
St. Paul, MN 55144
 
Attention: Randal Roebuck , Manager, RFID Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Z6204
Name of Grantee:  3M Traffic Safety Systems
Equipment Class: Part 90 Location & Monitoring Transmitter
Notes: 3M Toll RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90.353 902.75  -  903.25 3.0 1.0  PM 432KK1D
90.353 911.75  -  919.25 3.2 1.0  PM 1M06K1D
90.353 914.25  -  915.75 2.5 1.0  PM 758KK1D
90.353 902.75  -  903.25 2.8 1.0  PM 437KK1D
90.353 910.95  -  920.45 2.8 1.0  PM 428KK1D
90.353 910.95  -  920.45 2.9 1.0  PM 422KK1D

Class 2 Permissive Change to add the new DSB-ASK modulation mode as documented in this filing. Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 150 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multitransmitter product procedures. Professional installers must be provided with antenna installation instructions for compliance with FCC Rules and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application Y180BPrPbYOva6v9LMjHEw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

3M Traffic Safety Systems
3M Center, Building 225-4
St. Paul, MN 55144
United States 		  Date of Grant: 02/04/2016

Application Dated: 02/03/2016
 
Attention: Randal Roebuck , Manager, RFID Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Z6204
Name of Grantee:  3M Traffic Safety Systems
Equipment Class: Part 90 Location & Monitoring Transmitter
Notes: 3M Toll RFID Reader
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90.353 902.75  -  903.25 3.0 1.0  PM 432KK1D
90.353 911.75  -  919.25 3.2 1.0  PM 1M06K1D
90.353 914.25  -  915.75 2.5 1.0  PM 758KK1D
90.353 902.75  -  903.25 2.8 1.0  PM 437KK1D
90.353 910.95  -  920.45 2.8 1.0  PM 428KK1D
90.353 910.95  -  920.45 2.9 1.0  PM 422KK1D

Class 2 Permissive Change to add the new DSB-ASK modulation mode as documented in this filing. Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 150 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multitransmitter product procedures. Professional installers must be provided with antenna installation instructions for compliance with FCC Rules and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application U5DqGjdhS6VxP7aD/CsHMg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
 Date of Grant: 12/05/2014

Application Dated: 12/04/2014
3M Traffic Safety Systems
3M Center, Building 225-4
St. Paul, MN 55144
 
Attention: Randal Roebuck , Manager, RFID Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Z6204
Name of Grantee:  3M Traffic Safety Systems
Equipment Class: Part 90 Location & Monitoring Transmitter
Notes: 3M UHF RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90.353 902.75  -  903.25 3.0 1.0  PM 432KK1D
90.353 911.75  -  919.25 3.2 1.0  PM 1M06K1D
90.353 910.95  -  920.45 2.9 1.0  PM 422KK1D
90.353 914.25  -  915.75 2.5 1.0  PM 758KK1D

Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 120 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Professional installers must be provided with antenna installation instructions for compliance with FCC Rules and transmitter operating conditions for satisfying RF exposure compliance

EAS Grant - Application U5DqGjdhS6VxP7aD/CsHMg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

3M Traffic Safety Systems
3M Center, Building 225-4
St. Paul, MN 55144
United States 		  Date of Grant: 12/05/2014

Application Dated: 12/04/2014
 
Attention: Randal Roebuck , Manager, RFID Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Z6204
Name of Grantee:  3M Traffic Safety Systems
Equipment Class: Part 90 Location & Monitoring Transmitter
Notes: 3M UHF RFID Reader
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90.353 902.75  -  903.25 3.0 1.0  PM 432KK1D
90.353 911.75  -  919.25 3.2 1.0  PM 1M06K1D
90.353 910.95  -  920.45 2.9 1.0  PM 422KK1D
90.353 914.25  -  915.75 2.5 1.0  PM 758KK1D

Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 120 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Professional installers must be provided with antenna installation instructions for compliance with FCC Rules and transmitter operating conditions for satisfying RF exposure compliance



TCB Grant - Application SzUIFN+MGbP7IKyEW/1Jyg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
 Date of Grant: 12/04/2014

Application Dated: 12/04/2014
3M Traffic Safety Systems
3M Center, Building 225-4
St. Paul, MN 55144
 
Attention: Randal Roebuck , Manager, RFID Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Z6204
Name of Grantee:  3M Traffic Safety Systems
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 3M UHF RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.3  -  927.75 1.0  

Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 100 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Professional installers must be provided with antenna installation instructions for compliance with FCC Rules and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application SzUIFN+MGbP7IKyEW/1Jyg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

3M Traffic Safety Systems
3M Center, Building 225-4
St. Paul, MN 55144
United States 		  Date of Grant: 12/04/2014

Application Dated: 12/04/2014
 
Attention: Randal Roebuck , Manager, RFID Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Z6204
Name of Grantee:  3M Traffic Safety Systems
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 3M UHF RFID Reader
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.3  -  927.75 1.0  

Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 100 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Professional installers must be provided with antenna installation instructions for compliance with FCC Rules and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application kvXFFSMo4gWkRyxNyMptqQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
 Date of Grant: 01/27/2015

Application Dated: 01/27/2015
3M Traffic Safety Systems
3M Center, Building 225-4
St. Paul, MN 55144
 
Attention: Randal Roebuck , Manager, RFID Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Z6204
Name of Grantee:  3M Traffic Safety Systems
Equipment Class: Part 90 Location & Monitoring Transmitter
Notes: 3M UHF RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90.353 902.75  -  903.25 3.0 1.0  PM 432KK1D
90.353 911.75  -  919.25 3.2 1.0  PM 1M06K1D
90.353 910.95  -  920.45 2.9 1.0  PM 422KK1D
90.353 914.25  -  915.75 2.5 1.0  PM 758KK1D

Class 2 Permissive Change to add a new antenna as documented in this filing.

Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 150 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multitransmitter product procedures. Professional installers must be provided with antenna installation instructions for compliance with FCC Rules and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application kvXFFSMo4gWkRyxNyMptqQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

3M Traffic Safety Systems
3M Center, Building 225-4
St. Paul, MN 55144
United States 		  Date of Grant: 01/27/2015

Application Dated: 01/27/2015
 
Attention: Randal Roebuck , Manager, RFID Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Z6204
Name of Grantee:  3M Traffic Safety Systems
Equipment Class: Part 90 Location & Monitoring Transmitter
Notes: 3M UHF RFID Reader
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90.353 902.75  -  903.25 3.0 1.0  PM 432KK1D
90.353 911.75  -  919.25 3.2 1.0  PM 1M06K1D
90.353 910.95  -  920.45 2.9 1.0  PM 422KK1D
90.353 914.25  -  915.75 2.5 1.0  PM 758KK1D

Class 2 Permissive Change to add a new antenna as documented in this filing.

Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 150 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multitransmitter product procedures. Professional installers must be provided with antenna installation instructions for compliance with FCC Rules and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application Gh2iAS7FqULWX28Yi1pk+Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
 Date of Grant: 02/05/2016

Application Dated: 02/04/2016
3M Traffic Safety Systems
3M Center, Building 225-4
St. Paul, MN 55144
 
Attention: Randal Roebuck , Manager, RFID Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Z6204
Name of Grantee:  3M Traffic Safety Systems
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 3M Toll RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.3  -  927.75 1.0  

Class 2 Permissive Change to add the new DSB-ASK modulation mode as documented in this filing. Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 100 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Professional installers must be provided with antenna installation instructions for compliance with FCC Rules and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application Gh2iAS7FqULWX28Yi1pk+Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

3M Traffic Safety Systems
3M Center, Building 225-4
St. Paul, MN 55144
United States 		  Date of Grant: 02/05/2016

Application Dated: 02/04/2016
 
Attention: Randal Roebuck , Manager, RFID Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Z6204
Name of Grantee:  3M Traffic Safety Systems
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 3M Toll RFID Reader
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.3  -  927.75 1.0  

Class 2 Permissive Change to add the new DSB-ASK modulation mode as documented in this filing. Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 100 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Professional installers must be provided with antenna installation instructions for compliance with FCC Rules and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application /4t9Mlhsxlv8QsdJsjb0hw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
 Date of Grant: 01/27/2015

Application Dated: 01/27/2015
3M Traffic Safety Systems
3M Center, Building 225-4
St. Paul, MN 55144
 
Attention: Randal Roebuck , Manager, RFID Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Z6204
Name of Grantee:  3M Traffic Safety Systems
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 3M UHF RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.3  -  927.75 1.0  

Class 2 Permissive Change to add a new antenna as documented in this filing.

Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 100 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multitransmitter product procedures. Professional installers must be provided with antenna installation instructions for compliance with FCC Rules and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application /4t9Mlhsxlv8QsdJsjb0hw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

3M Traffic Safety Systems
3M Center, Building 225-4
St. Paul, MN 55144
United States 		  Date of Grant: 01/27/2015

Application Dated: 01/27/2015
 
Attention: Randal Roebuck , Manager, RFID Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  M4Z6204
Name of Grantee:  3M Traffic Safety Systems
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 3M UHF RFID Reader
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.3  -  927.75 1.0  

Class 2 Permissive Change to add a new antenna as documented in this filing.

Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 100 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multitransmitter product procedures. Professional installers must be provided with antenna installation instructions for compliance with FCC Rules and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: