FCC ID MAD-AP5822

802.11a+b/g Outdoor AP/Bridge with int/ext Antenna

by Microelectronics Technology Inc

Grantee Code: MAD   Product Code: AP5822
Latest application date: 2007-08-24

FCC ID Device Details

FCC IDMAD-AP5822
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMAD
Product CodeAP5822
Applicant BusinessMicroelectronics Technology Inc 🇹🇼
Related Domains mtigroup.com adt.com.tw
Equipment Class802.11a+b/g Outdoor AP/Bridge with int/ext Antenna
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5250-5350 MHzClass II permissive change or modification of presently authorized equipment2007-08-24
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-08-24
2412-2462 MHzOriginal Equipment2004-07-19
5250-5350 MHzOriginal Equipment2004-07-19

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2004-07-19PDF 1.2 MB
Internal photos 1Internal Photos2007-08-24PDF 3 MB
Internal photos 2Internal Photos2007-08-24PDF 3.1 MB
internal photos 1Internal Photos2004-07-19PDF 3.1 MB
internal photos 2Internal Photos2004-07-19PDF 3.4 MB
External photosExternal Photos2007-08-24PDF 863.2 KB
external photosExternal Photos2004-07-19PDF 628.3 KB
label locationID Label/Location Info2004-07-19PDF 53.5 KB
label sampleID Label/Location Info2004-07-19PDF 49.2 KB
operational descriptionOperational Description2004-07-19PDF 64.7 KB
TSet up photos for DFSTest Setup Photos2007-08-24PDF 1,001.2 KB
TSet up photos for RFTest Setup Photos2007-08-24PDF 641.3 KB
test setup photosTest Setup Photos2004-07-19PDF 631.3 KB
Test report 247 rev2Test Report2007-08-24PDF 2.5 MB
Test report 407 1 rev2Test Report2007-08-24PDF 2 MB
Test report 407 2 revTest Report2007-08-24PDF 2.5 MB
Test report DFS rev2Test Report2007-08-24PDF 1.2 MB
Test report for DFS revised 3Test Report2007-08-24PDF 1.2 MB
test report 15CE part 1Test Report2004-07-19PDF 2.4 MB
test report 15CE part 2Test Report2004-07-19PDF 2.6 MB
test report 15CE part 3Test Report2004-07-19PDF 2.6 MB
Ad Hoc Declaration revisedCover Letter(s)2007-08-24PDF 24.7 KB
Ad Hoc declaration revisedCover Letter(s)2007-08-24PDF 24.7 KB
Description of ChangeCover Letter(s)2007-08-24PDF 17.3 KB
Description of changeCover Letter(s)2007-08-24PDF 17.3 KB
DoCCover Letter(s)2004-07-19PDF 52.2 KB
authorization letterCover Letter(s)2004-07-19PDF 123.1 KB
confidentiality requestCover Letter(s)2004-07-19PDF 31.3 KB
RF Exposure revisedRF Exposure Info2007-08-24PDF 35.7 KB
RF exposure calculationRF Exposure Info2004-07-19PDF 107.7 KB
blockdiagram 1 Metadata onlyBlock DiagramPDF 61.3 KB
blockdiagram 2 Metadata onlyBlock DiagramPDF 61.4 KB
schematics 1 Metadata onlySchematicsPDF 284.5 KB
schematics 2 Metadata onlySchematicsPDF 284.2 KB

Application Information

Application IDhHNw2hXOtFskNnW/bFSUxA==
Final Action Date2007-08-24
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009755075
Model-AP5822
Frequency Range5250-5350 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11a+b/g Outdoor AP/Bridge with int/ext Antenna
Responsible PartyKevin Ku, Product Quality Section Manager-Radio, kevin.ku@mtigroup.com , 886-3-577-3335
AgentEric Eric Eric, Advance Data Technology Corporation, eric_lin@adt.com.tw , 886-3-593-5343
Technical ContactEric Lin, Advance Data Technology Corporation, eric_lin@adt.com.tw , 886-3-593-5343
Non-Technical ContactEric Lin, Advance Data Technology Corporation, eric_lin@adt.com.tw , 886-3-593-5343
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-2-2605-2180-3
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOnly professional installation is allowed. Power output listed is conducted. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. Minimum separation distance is depending on antenna type 30 cm or 20 cm from all persons and the device and antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End-users must be provided with specific operating conditions for satisfying RF exposure compliance. The minimum antenna gain for DFS compliance is 8 dBi.

Applications

Application IDDatePurpose
hHNw2hXOtFskNnW/bFSUxA==2007-08-24Class II permissive change or modification of presently authorized equipment
LwVsyrPW061SQNQqpXRz4A==2007-08-24Class II permissive change or modification of presently authorized equipment
zf81N85jyeAKzmea21MivA==2004-07-19Original Equipment
j9l0KR9pkTN8qc8MsKrFFQ==2004-07-19Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.07515CCC
5250-5350 MHz0.074000015ECC
5250-5350 MHz0.07415ECC, ND
5500-5700 MHz0.04315ECC, ND
5725-5850 MHz0.03515CCC

Grants

TCB Grant - Application zf81N85jyeAKzmea21MivA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/19/2004

Application Dated: 07/19/2004
Microelectronics Technology Inc
No 1, Innovation Road II
Hsinchu Science-Based Industrial Park
Hsinchu 300,
Taiwan
 
Attention: Kevin Ku , Product Quality Section Manager-Radio

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MAD-AP5822
Name of Grantee:  Microelectronics Technology Inc
Equipment Class: Digital Transmission System
Notes: 802.11a+b/g Outdoor AP/Bridge with int/ext Antenna
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.075  
CC 15C 5725.0  -  5850.0 0.035  

Only professional installation is allowed. Power output listed is conducted. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. Minimum separation distance is depending on antenna type 30 cm or 20 cm from all persons and the device and antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End-users must be provided with specific operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zf81N85jyeAKzmea21MivA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Microelectronics Technology Inc
No 1, Innovation Road II Hsinchu Science-Based Industrial Park
Hsinchu 300,
Taiwan
  Date of Grant: 07/19/2004

Application Dated: 07/19/2004
 
Attention: Kevin Ku , Product Quality Section Manager-Radio

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MAD-AP5822
Name of Grantee:  Microelectronics Technology Inc
Equipment Class: Digital Transmission System
Notes: 802.11a+b/g Outdoor AP/Bridge with int/ext Antenna
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.075  
CC 15C 5725.0  -  5850.0 0.035  

Only professional installation is allowed. Power output listed is conducted. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. Minimum separation distance is depending on antenna type 30 cm or 20 cm from all persons and the device and antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End-users must be provided with specific operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application LwVsyrPW061SQNQqpXRz4A==

This application does not exist.

EAS Grant - Application LwVsyrPW061SQNQqpXRz4A==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Microelectronics Technology Inc
No 1, Innovation Road II Hsinchu Science-Based Industrial Park
Hsinchu 300,
Taiwan
  Date of Grant: 08/24/2007

Application Dated: 04/26/2007
 
Attention: Kevin Ku , Product Quality Section Manager-Radio

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MAD-AP5822
Name of Grantee:  Microelectronics Technology Inc
Equipment Class: Digital Transmission System
Notes: 802.11a+b/g Outdoor AP/Bridge with int/ext Antenna
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.075  
CC 15C 5725.0  -  5850.0 0.035  

Only professional installation is allowed. Power output listed is conducted. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. Minimum separation distance is depending on antenna type 30 cm or 20 cm from all persons and the device and antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End-users must be provided with specific operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application j9l0KR9pkTN8qc8MsKrFFQ==

Mail To:
Eric Lin,
Advance Data Technology Corporation
81-1 Luliaoken, 9th Lin, Wulung Tsuen Chiunglin
Hsinchu, 307
Taiwan
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/19/2004

Application Dated: 07/19/2004
Microelectronics Technology Inc
No 1, Innovation Road II
Hsinchu Science-Based Industrial Park
Hsinchu 300,
Taiwan
 
Attention: Kevin Ku , Product Quality Section Manager-Radio

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MAD-AP5822
Name of Grantee:  Microelectronics Technology Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a+b/g Outdoor AP/Bridge with int/ext Antenna
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5250.0  -  5350.0 0.074  

Only professional installation is allowed. Power output listed is conducted. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. Minimum separation distance is depending on antenna type 30 cm or 20 cm from all persons and the device and antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End-users must be provided with specific operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application j9l0KR9pkTN8qc8MsKrFFQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Microelectronics Technology Inc
No 1, Innovation Road II Hsinchu Science-Based Industrial Park
Hsinchu 300,
Taiwan
  Date of Grant: 07/19/2004

Application Dated: 07/19/2004
 
Attention: Kevin Ku , Product Quality Section Manager-Radio

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MAD-AP5822
Name of Grantee:  Microelectronics Technology Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a+b/g Outdoor AP/Bridge with int/ext Antenna
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5250.0  -  5350.0 0.074  

Only professional installation is allowed. Power output listed is conducted. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. Minimum separation distance is depending on antenna type 30 cm or 20 cm from all persons and the device and antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End-users must be provided with specific operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application hHNw2hXOtFskNnW/bFSUxA==

This application does not exist.

EAS Grant - Application hHNw2hXOtFskNnW/bFSUxA==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Microelectronics Technology Inc
No 1, Innovation Road II Hsinchu Science-Based Industrial Park
Hsinchu 300,
Taiwan
  Date of Grant: 08/24/2007

Application Dated: 04/26/2007
 
Attention: Kevin Ku , Product Quality Section Manager-Radio

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MAD-AP5822
Name of Grantee:  Microelectronics Technology Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a+b/g Outdoor AP/Bridge with int/ext Antenna
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC ND 15E 5250.0  -  5350.0 0.074  
CC ND 15E 5500.0  -  5700.0 0.043  

Only professional installation is allowed. Power output listed is conducted. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. Minimum separation distance is depending on antenna type 30 cm or 20 cm from all persons and the device and antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End-users must be provided with specific operating conditions for satisfying RF exposure compliance. The minimum antenna gain for DFS compliance is 8 dBi.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:
Eric Lin,
Advance Data Technology Corporation
81-1 Luliaoken, 9th Lin, Wulung Tsuen Chiunglin
Hsinchu, 307
Taiwan