FCC ID MCLAIRMPI350DE

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089

Date of Grant: 09/03/2003 Application Dated: 09/03/2003

HON HAI Precision Ind. Co., Ltd.

5F-1, 5, Hsin-An Road

Hsinchu Science-Based Industrial Park

Hsinchu, Taiwan

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLAIRMPI350DE
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	Wireless MiniPCI Card

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.117

OEM integration only" and "the device cannot be sold to the General Public". This transmitter operates with specific laptop computers and antenna configurations as described in this filing and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations than those described below, including different portable configurations with respect to 2.1093 and antenna configurations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. SAR testing was performed as described in this filing. Highest reported SAR found was 1.53 mW/g.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HON HAI Precision Ind. Co., Ltd. 5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park Hsinchu, Taiwan

Date of Grant: 09/03/2003 Application Dated: 09/03/2003

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLAIRMPI350DE
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	Wireless MiniPCI Card
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.117

OEM integration only" and "the device cannot be sold to the General Public". This transmitter operates with specific laptop computers and antenna configurations as described in this filing and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations than those described below, including different portable configurations with respect to 2.1093 and antenna configurations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. SAR testing was performed as described in this filing. Highest reported SAR found was 1.53 mW/g.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application wiuC9yT6U8wW3J4kOCiCfA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089

Date of Grant: 03/07/2004 Application Dated: 03/07/2004

HON HAI Precision Ind. Co., Ltd.

5F-1, 5, Hsin-An Road

Hsinchu Science-Based Industrial Park

Hsinchu, Taiwan

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLAIRMPI350DE
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	802.11b Wireless MiniPCI Card

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.117

OEM integration only" and "the device cannot be sold to the General Public". This transmitter operates with specific laptop computers and antenna configurations as described in this filing and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations than those described below, including different portable configurations with respect to 2.1093 and antenna configurations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. SAR testing was performed as described in this filing. Highest reported SAR found was 1.54 mW/g.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HON HAI Precision Ind. Co., Ltd. 5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park Hsinchu, Taiwan

Date of Grant: 03/07/2004 Application Dated: 03/07/2004

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLAIRMPI350DE
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	802.11b Wireless MiniPCI Card
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.117

OEM integration only" and "the device cannot be sold to the General Public". This transmitter operates with specific laptop computers and antenna configurations as described in this filing and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations than those described below, including different portable configurations with respect to 2.1093 and antenna configurations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. SAR testing was performed as described in this filing. Highest reported SAR found was 1.54 mW/g.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: