FCC ID MCLJ07H06903

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 03/27/2003 Application Dated: 03/27/2003

HON HAI Precision Ind. Co., Ltd.

5F-1, 5, Hsin-An Road

Hsinchu Science-Based Industrial Park

Hsinchu, Taiwan

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g WLAN Mini-PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15E	5180.0  -  5250.0	0.044
CE	15E	5260.0  -  5320.0	0.056

Limited Modular Approval. Output power is conducted. Approval is limited to OEM installation only, user installation is prohibited. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Grantee and OEM integrators must ensure that installation procedures comply with 15.407(d) integral antenna requirements to prevent end-user access to the transmitter module after installation. Operation in the 5.15 GHz to 5.25 GHz frequency range is restricted to indoor use only.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HON HAI Precision Ind. Co., Ltd. 5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park Hsinchu, Taiwan

Date of Grant: 03/27/2003 Application Dated: 03/27/2003

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g WLAN Mini-PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15E	5180.0  -  5250.0	0.044
CE	15E	5260.0  -  5320.0	0.056

Limited Modular Approval. Output power is conducted. Approval is limited to OEM installation only, user installation is prohibited. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Grantee and OEM integrators must ensure that installation procedures comply with 15.407(d) integral antenna requirements to prevent end-user access to the transmitter module after installation. Operation in the 5.15 GHz to 5.25 GHz frequency range is restricted to indoor use only.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application XlG6OlJueow1Ha+yQtfE6Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 01/13/2004 Application Dated: 01/13/2004

HON HAI Precision Ind. Co., Ltd.

5F-1, 5, Hsin-An Road

Hsinchu Science-Based Industrial Park

Hsinchu, Taiwan

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	802.11a/b/g WLAN Mini PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.158
CE	15C	5745.0  -  5825.0	0.118

Limited Modular Approval. Output power is conducted. In this Class II permissive change, alternate antenna has been evaluated to be used in mobile RF exposure conditions. Co-located transmitter operating conditions with FCC ID: LNQBTM200 in a specific notebook computer have been evaluated in the previous filing. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in filings under this FCC ID. The only antennas approved for use with this module are as documented in filings under this FCC ID, which must be installed in manners specified therein. Grantee must ensure that installation and use procedures comply with 15.407 integral antenna and indoor-use-only requirements. This device must utilize a BIOS lock mechanism which ensures use only with notebook computers as specified in applicable filings under this FCC ID. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Use in portable RF exposure conditions is limited to the specific laptop computer configurations evaluated in the previous Class II filing. The highest reported SAR values under this FCC ID are: body 2.4 GHz, 1.24 W/kg; 5.8 GHz, 0.33 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HON HAI Precision Ind. Co., Ltd. 5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park Hsinchu, Taiwan

Date of Grant: 01/13/2004 Application Dated: 01/13/2004

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	802.11a/b/g WLAN Mini PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.158
CE	15C	5745.0  -  5825.0	0.118

Limited Modular Approval. Output power is conducted. In this Class II permissive change, alternate antenna has been evaluated to be used in mobile RF exposure conditions. Co-located transmitter operating conditions with FCC ID: LNQBTM200 in a specific notebook computer have been evaluated in the previous filing. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in filings under this FCC ID. The only antennas approved for use with this module are as documented in filings under this FCC ID, which must be installed in manners specified therein. Grantee must ensure that installation and use procedures comply with 15.407 integral antenna and indoor-use-only requirements. This device must utilize a BIOS lock mechanism which ensures use only with notebook computers as specified in applicable filings under this FCC ID. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Use in portable RF exposure conditions is limited to the specific laptop computer configurations evaluated in the previous Class II filing. The highest reported SAR values under this FCC ID are: body 2.4 GHz, 1.24 W/kg; 5.8 GHz, 0.33 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application Wx3Q7jdriuoIDeodlAHMYw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 01/13/2004 Application Dated: 01/13/2004

HON HAI Precision Ind. Co., Ltd.

5F-1, 5, Hsin-An Road

Hsinchu Science-Based Industrial Park

Hsinchu, Taiwan

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11a/b/g WLAN Mini PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15E	5180.0  -  5250.0	0.044
CE	15E	5260.0  -  5320.0	0.056

Limited Modular Approval. Output power is conducted. In this Class II permissive change, alternate antenna has been evaluated to be used in mobile RF exposure conditions. Co-located transmitter operating conditions with FCC ID: LNQBTM200 in a specific notebook computer have been evaluated in the previous filing. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in filings under this FCC ID. The only antennas approved for use with this module are as documented in filings under this FCC ID, which must be installed in manners specified therein. Grantee must ensure that installation and use procedures comply with 15.407 integral antenna and indoor-use-only requirements. This device must utilize a BIOS lock mechanism which ensures use only with notebook computers as specified in applicable filings under this FCC ID. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Use in portable RF exposure conditions is limited to the specific laptop computer configurations evaluated in the previous Class II filing. The highest reported SAR values under this FCC ID are: body 5.2 GHz, 0.44 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HON HAI Precision Ind. Co., Ltd. 5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park Hsinchu, Taiwan

Date of Grant: 01/13/2004 Application Dated: 01/13/2004

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11a/b/g WLAN Mini PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15E	5180.0  -  5250.0	0.044
CE	15E	5260.0  -  5320.0	0.056

Limited Modular Approval. Output power is conducted. In this Class II permissive change, alternate antenna has been evaluated to be used in mobile RF exposure conditions. Co-located transmitter operating conditions with FCC ID: LNQBTM200 in a specific notebook computer have been evaluated in the previous filing. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in filings under this FCC ID. The only antennas approved for use with this module are as documented in filings under this FCC ID, which must be installed in manners specified therein. Grantee must ensure that installation and use procedures comply with 15.407 integral antenna and indoor-use-only requirements. This device must utilize a BIOS lock mechanism which ensures use only with notebook computers as specified in applicable filings under this FCC ID. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Use in portable RF exposure conditions is limited to the specific laptop computer configurations evaluated in the previous Class II filing. The highest reported SAR values under this FCC ID are: body 5.2 GHz, 0.44 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application PXGBcCg2uiqAT3q9IBBMsw==

EAS Grant - Application PXGBcCg2uiqAT3q9IBBMsw==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HON HAI Precision Ind. Co., Ltd. 5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park Hsinchu, Taiwan

Date of Grant: 12/18/2003 Application Dated: 10/21/2003

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11a/b/g WLAN Mini PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15E	5180.0  -  5250.0	0.044
CE	15E	5260.0  -  5320.0	0.056

Limited Modular Approval. Output power is conducted. Co-located transmitter operating conditions with FCC ID: LNQBTM200 in a specific notebook computer have been evaluated as described in this Class II filing. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in filings under this FCC ID. The only antennas approved for use with this module are as documented in filings under this FCC ID, which must be installed in manners specified therein. Grantee must ensure that installation and use procedures comply with 15.407 integral antenna and indoor-use-only requirements. This device must utilize a BIOS lock mechanism which ensures use only with notebook computers as specified in applicable filings under this FCC ID. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Use in portable RF exposure conditions is limited to the specific laptop computer configurations evaluated in this Class II filing. The highest reported SAR values are: body 5.2 GHz, 0.44 W/kg.

This Permissive Change/Modification was originally issued on 12/11/2003.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application KJ+rF7xZXl8c2BrKBjBzYg==

Mail To:

STEVE CHENG, EMC ENGINEERING MANAGER

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 09/25/2003 Application Dated: 09/25/2003

HON HAI Precision Ind. Co., Ltd.

5F-1, 5, Hsin-An Road

Hsinchu Science-Based Industrial Park

Hsinchu, Taiwan

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g WLAN Mini-PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.158
CE	15C	5745.0  -  5825.0	0.118

Class II permissive change by utilizing a BIOS lock mechanism to allow end user to install the module with HP Notebook computers with specific antenna as documented in the original certification filing. Limited Modular Approval. Output power is conducted. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HON HAI Precision Ind. Co., Ltd. 5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park Hsinchu, Taiwan

Date of Grant: 09/25/2003 Application Dated: 09/25/2003

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g WLAN Mini-PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.158
CE	15C	5745.0  -  5825.0	0.118

Class II permissive change by utilizing a BIOS lock mechanism to allow end user to install the module with HP Notebook computers with specific antenna as documented in the original certification filing. Limited Modular Approval. Output power is conducted. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application f8v9iwf7JhFjHhye+XF/wA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 03/27/2003 Application Dated: 03/27/2003

HON HAI Precision Ind. Co., Ltd.

5F-1, 5, Hsin-An Road

Hsinchu Science-Based Industrial Park

Hsinchu, Taiwan

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g WLAN Mini-PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.158
CE	15C	5745.0  -  5825.0	0.118

Limited Modular Approval. Output power is conducted. Approval is limited to OEM installation only, user installation is prohibited. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HON HAI Precision Ind. Co., Ltd. 5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park Hsinchu, Taiwan

Date of Grant: 03/27/2003 Application Dated: 03/27/2003

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g WLAN Mini-PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.158
CE	15C	5745.0  -  5825.0	0.118

Limited Modular Approval. Output power is conducted. Approval is limited to OEM installation only, user installation is prohibited. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application e46gEQeXxLJouE6RF7dwhA==

EAS Grant - Application e46gEQeXxLJouE6RF7dwhA==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HON HAI Precision Ind. Co., Ltd. 5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park Hsinchu, Taiwan

Date of Grant: 12/18/2003 Application Dated: 10/21/2003

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	802.11a/b/g WLAN Mini PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.158
CE	15C	5745.0  -  5825.0	0.118

Limited Modular Approval. Output power is conducted. Co-located transmitter operating conditions with FCC ID: LNQBTM200 in a specific notebook computer have been evaluated as described in this Class II filing. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in filings under this FCC ID. The only antennas approved for use with this module are as documented in filings under this FCC ID, which must be installed in manners specified therein. Grantee must ensure that installation and use procedures comply with 15.407 integral antenna and indoor-use-only requirements. This device must utilize a BIOS lock mechanism which ensures use only with notebook computers as specified in applicable filings under this FCC ID. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Use in portable RF exposure conditions is limited to the specific laptop computer configurations evaluated in this Class II filing. The highest reported SAR values are: body 2.4 GHz, 1.24 W/kg; 5.8 GHz, 0.33 W/kg.

This Permissive Change/Modification was originally issued on 12/11/2003.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application 1IaeijGO8PZCJWjE66mVYw==

Mail To:

STEVE CHENG, EMC ENGINEERING MANAGER

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 09/25/2003 Application Dated: 09/25/2003

HON HAI Precision Ind. Co., Ltd.

5F-1, 5, Hsin-An Road

Hsinchu Science-Based Industrial Park

Hsinchu, Taiwan

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g WLAN Mini-PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15E	5180.0  -  5250.0	0.044
CE	15E	5260.0  -  5320.0	0.056

Class II permissive change by utilizing a BIOS lock mechanism to allow end user to install the module with specific antenna as documented in the original certification filing. Limited Modular Approval. Output power is conducted. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Operation in the 5.15 GHz to 5.25 GHz frequency range is restricted to indoor use only.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HON HAI Precision Ind. Co., Ltd. 5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park Hsinchu, Taiwan

Date of Grant: 09/25/2003 Application Dated: 09/25/2003

Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MCLJ07H06903
Name of Grantee:	HON HAI Precision Ind. Co., Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g WLAN Mini-PCI Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15E	5180.0  -  5250.0	0.044
CE	15E	5260.0  -  5320.0	0.056

Class II permissive change by utilizing a BIOS lock mechanism to allow end user to install the module with specific antenna as documented in the original certification filing. Limited Modular Approval. Output power is conducted. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Operation in the 5.15 GHz to 5.25 GHz frequency range is restricted to indoor use only.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: