FCC ID MCLJ20H049

RF Module

by HON HAI Precision Ind. Co., Ltd.

Grantee Code: MCL   Product Code: J20H049
Latest application date: 2011-08-31

FCC ID Device Details

FCC IDMCLJ20H049
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMCL
Product CodeJ20H049
Applicant BusinessHON HAI Precision Ind. Co., Ltd. 🇹🇼
Related Domains foxconn.com
Equipment ClassRF Module
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2011-08-31
2412-2462 MHzOriginal Equipment2010-12-29

Exhibits

DocumentTypeAvailableFile
manualUsers Manual2010-12-29PDF 293.5 KB
int phoInternal Photos2011-08-31PDF 38.8 KB
int phoInternal Photos2010-12-29PDF 247.3 KB
ext phoExternal Photos2011-08-31PDF 638.2 KB
ext phoExternal Photos2010-12-29PDF 638.2 KB
labelID Label/Location Info2010-12-29PDF 360.9 KB
setup phoTest Setup Photos2011-08-31PDF 157.1 KB
setup phoTest Setup Photos2010-12-29PDF 258.8 KB
antenna specTest Report2011-08-31PDF 334.1 KB
test reportTest Report2011-08-31PDF 1.6 MB
test reportTest Report2010-12-29PDF 1.3 MB
declarationCover Letter(s)2011-08-31PDF 25.7 KB
authCover Letter(s)2010-12-29PDF 25.2 KB
confCover Letter(s)2010-12-29PDF 42.7 KB
modular approvalCover Letter(s)2010-12-29PDF 62.4 KB
rf exp infoRF Exposure Info2011-08-31PDF 79.5 KB
rf expRF Exposure Info2010-12-29PDF 78.7 KB

Application Information

Application IDZonxChk2mx4kyKgawOB72w==
Final Action Date2011-08-31
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0010777365
ModelJ20H049
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionRF Module
Responsible PartyMrs. Rio Chen, Compliance Deputy Manager, rio.chen@foxconn.com , +886-3-5784975
AgentNeutron Engineering ltd, kate@neutron.com.tw
Technical ContactNeutron Engineering Inc., kate@neutron.com.tw
Test FirmAndy Chiu, BTL Inc., Andy@newbtl.com , 886-2-2657-3299
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
ZonxChk2mx4kyKgawOB72w==2011-08-31Class II permissive change or modification of presently authorized equipment
lBUqsCl18h6COtpthOxKBg==2010-12-29Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.340400015C

Grants

TCB Grant - Application ZonxChk2mx4kyKgawOB72w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 08/31/2011

Application Dated: 08/31/2011
HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road
Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLJ20H049
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Digital Transmission System
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.3404  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application ZonxChk2mx4kyKgawOB72w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
  Date of Grant: 08/31/2011

Application Dated: 08/31/2011
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLJ20H049
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Digital Transmission System
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.3404  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application lBUqsCl18h6COtpthOxKBg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 12/29/2010

Application Dated: 12/29/2010
HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road
Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLJ20H049
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Digital Transmission System
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.3404  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application lBUqsCl18h6COtpthOxKBg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
  Date of Grant: 12/29/2010

Application Dated: 12/29/2010
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLJ20H049
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Digital Transmission System
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.3404  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.



Mail To: