FCC ID MCLT77H747

NFC Module

by HON HAI Precision Ind. Co., Ltd.

Grantee Code: MCL   Product Code: T77H747
Latest application date: 2026-07-12

FCC ID Device Details

FCC IDMCLT77H747
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMCL
Product CodeT77H747
Applicant BusinessHON HAI Precision Ind. Co., Ltd. 🇹🇼
Related Domains foxconn.com
Equipment ClassNFC Module
Test FirmBureau Veritas CPS(H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
13.56 MHzClass II permissive change or modification of presently authorized equipment2026-07-12
13.56 MHzClass II permissive change or modification of presently authorized equipment2023-11-24
13.56 MHzClass II permissive change or modification of presently authorized equipment2023-08-24
13.56 MHzClass II permissive change or modification of presently authorized equipment2017-10-26
13.56 MHzOriginal Equipment2016-09-08

Exhibits

DocumentTypeAvailableFile
User Manual_ rev2Users Manual2026-07-12PDF 2.1 MB
User ManualUsers Manual2023-11-24PDF 1.9 MB
Users Manual rev2Users Manual2023-08-24PDF 2 MB
User Manual rev 4.pdfUsers Manual2017-10-26PDF 2.5 MB
User Manual rev 4Users Manual2017-03-07PDF 3.2 MB
Internal PhotosInternal Photos2026-07-12PDF 182.8 KB
Internal Photos.pdfInternal Photos2017-10-26PDF 111.3 KB
Internal Photos revInternal Photos2017-03-07PDF 54.4 KB
External PhotosExternal Photos2026-07-12PDF 2.9 MB
External PhotosExternal Photos2023-11-24PDF 496.3 KB
External Photos rev.pdfExternal Photos2017-10-26PDF 355 KB
External Photos rev 2External Photos2017-03-07PDF 1.7 MB
ID Label Location Information revID Label/Location Info2016-09-08PDF 390.4 KB
Test Set Up PhotosTest Setup Photos2026-07-12PDF 382.3 KB
Test Setup PhotoTest Setup Photos2023-11-24PDF 855.8 KB
Test Setup Photo rev.pdfTest Setup Photos2017-10-26PDF 179.8 KB
Test Setup Photo revTest Setup Photos2017-03-07PDF 928.5 KB
Test ReportTest Report2026-07-12PDF 659.8 KB
Antenna Spec.Test Report2023-11-24PDF 3.4 MB
Test ReportTest Report2023-11-24PDF 788.9 KB
Antenna Test Report_Dexerials (ANT-M041A) revTest Report2023-08-24PDF 348 KB
Antenna Test Report_Dexerials (ANT-M043A) revTest Report2023-08-24PDF 488.4 KB
Antenna Test Report_Dexerials (ANT-M047A) revTest Report2023-08-24PDF 907.3 KB
Antenna Test Report_Murata (FLANBPA-0715) revTest Report2023-08-24PDF 780 KB
Antenna Test Report_SAA (LX7828-12-000-C) revTest Report2023-08-24PDF 789.3 KB
Antenna Test Report_SAA (LX8416-12-000-C) revTest Report2023-08-24PDF 787.1 KB
Test Report rev.pdfTest Report2017-10-26PDF 336.7 KB
Test Report revTest Report2016-09-08PDF 614.9 KB
Attestation (Statements of part 2.911(d)(5))Attestation Statements2026-07-12PDF 89.7 KB
Attestation (U.S. local Agent Letter)Attestation Statements2026-07-12PDF 193.5 KB
Attestation (Statements of part 2.911(d)(5))Attestation Statements2023-11-24PDF 180.3 KB
Attestation (U.S. local Agent Letter)Attestation Statements2023-11-24PDF 120.9 KB
Attestation (U.S. local Agent Letter) rev2Attestation Statements2023-08-24PDF 129.6 KB
Cover Letter (Agent Authorization)Cover Letter(s)2026-07-12PDF 86.3 KB
Description of ChangeCover Letter(s)2026-07-12PDF 95.8 KB
Cover Letter (Agent Authorization)Cover Letter(s)2023-11-24PDF 167.3 KB
Cover Letter (Description of Change)Cover Letter(s)2023-11-24PDF 73.8 KB
Cover Letter (Description of Change) revCover Letter(s)2023-08-24PDF 125.9 KB
Confidentiality Request (Long term) rev 2.pdfCover Letter(s)2017-10-26PDF 177.7 KB
Cover Letter (Agent Authorization).pdfCover Letter(s)2017-10-26PDF 63.7 KB
Description of Change rev.pdfCover Letter(s)2017-10-26PDF 58.5 KB
Cover Letter - Agent AuthorizationCover Letter(s)2016-09-08PDF 19.4 KB
Cover Letter - Confidentiality Request - Long TermCover Letter(s)2016-09-08PDF 18.1 KB
Cover Letter - Confidentiality Request - Short TermCover Letter(s)2016-09-08PDF 17.9 KB
Modular Approval RequestCover Letter(s)2016-09-08PDF 18.1 KB
RF Exposure Info (MPE)RF Exposure Info2026-07-12PDF 213.3 KB
RF Exposure Info (SAR)_ revRF Exposure Info2026-07-12PDF 344.7 KB
RF Exposure Info (MPE)RF Exposure Info2023-11-24PDF 256.8 KB
RF Exposure Info (SAR Exclusion) rev2RF Exposure Info2023-08-24PDF 314.3 KB
RF Exposure Info (MPE) rev.pdfRF Exposure Info2017-10-26PDF 167.3 KB
RF Exposure Information (MPE) revRF Exposure Info2016-09-08PDF 202.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 273.4 KB
Schematics Metadata onlySchematicsPDF 513.5 KB
Operational Description (Antenna Specification).pdf Metadata onlyOperational DescriptionPDF 907.3 KB
Operational Description rev Metadata onlyOperational DescriptionPDF 39.4 KB
Operational Description rev.pdf Metadata onlyOperational DescriptionPDF 59.5 KB

Application Information

Application ID1PrS1zzTlHwBj+/gG8tI7w==
Final Action Date2026-07-12
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0010777365
ModelT77H747
Frequency Range13.56 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device DescriptionNFC Module
Responsible PartyMrs. Rio Chen, rio.chen@foxconn.com , +886-3-5784975
Non-Technical ContactIvy Hsu, Gloda Cert USA, glodacertusa@gmail.com , (949)923-1870
Test FirmLiu Ken, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, ken.liu@bureauveritas.com , +886-3-2600609
TCB Emailcertification@nacsemc.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
1PrS1zzTlHwBj+/gG8tI7w==2026-07-12Class II permissive change or modification of presently authorized equipment
SSxbgKyDD3rv7KgasixvIQ==2023-11-24Class II permissive change or modification of presently authorized equipment
9IbnH2j/hMuDIDCNTE57lA==2023-08-24Class II permissive change or modification of presently authorized equipment
oQNVrazIgdK6rtQ3nDPDiA==2017-10-26Class II permissive change or modification of presently authorized equipment
LMsf5Z06/xS4PyMZM023Lw==2016-09-08Original Equipment

Equipment Authorization

FrequencyRules
13.56 MHz15C

Grants

TCB Grant - Application SSxbgKyDD3rv7KgasixvIQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle #1
Littleton, MA 01460
Date of Grant: 11/24/2023

Application Dated: 11/24/2023
HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road
Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLT77H747
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: NFC Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

Class II Permissive change for add newly antenna as described in this filing. C2PC for adding portable operation evaluation with SAR exclusion. The module can be used on any mobile and portable device without limitation. Class II Permissive change for add newly antenna as described in this filing. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application SSxbgKyDD3rv7KgasixvIQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
  Date of Grant: 11/24/2023

Application Dated: 11/24/2023
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLT77H747
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: NFC Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

Class II Permissive change for add newly antenna as described in this filing. C2PC for adding portable operation evaluation with SAR exclusion. The module can be used on any mobile and portable device without limitation. Class II Permissive change for add newly antenna as described in this filing. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



TCB Grant - Application oQNVrazIgdK6rtQ3nDPDiA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 10/26/2017

Application Dated: 10/26/2017
HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road
Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLT77H747
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: NFC Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

Class II Permissive change for add newly antenna as described in this filing. Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter

EAS Grant - Application oQNVrazIgdK6rtQ3nDPDiA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
  Date of Grant: 10/26/2017

Application Dated: 10/26/2017
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLT77H747
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: NFC Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

Class II Permissive change for add newly antenna as described in this filing. Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter



TCB Grant - Application LMsf5Z06/xS4PyMZM023Lw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 09/08/2016

Application Dated: 09/08/2016
HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road
Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLT77H747
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: NFC Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

EAS Grant - Application LMsf5Z06/xS4PyMZM023Lw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
  Date of Grant: 09/08/2016

Application Dated: 09/08/2016
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLT77H747
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: NFC Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.



TCB Grant - Application 9IbnH2j/hMuDIDCNTE57lA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 08/24/2023

Application Dated: 08/21/2023
HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road
Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLT77H747
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: NFC Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

C2PC for adding portable operation evaluation with SAR exclusion. The module can be used on any mobile and portable device without limitation. Class II Permissive change for add newly antenna as described in this filing. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application 9IbnH2j/hMuDIDCNTE57lA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
  Date of Grant: 08/24/2023

Application Dated: 08/21/2023
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLT77H747
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: NFC Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

C2PC for adding portable operation evaluation with SAR exclusion. The module can be used on any mobile and portable device without limitation. Class II Permissive change for add newly antenna as described in this filing. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



TCB Grant - Application 1PrS1zzTlHwBj+/gG8tI7w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 07/12/2026

Application Dated: 07/13/2026
HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road
Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLT77H747
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: NFC Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

C2PC for adding a new antenna model under mobile and portable RF Exposure conditions as described in the filing.

Single Modular Approval. This transmitter has been evaluated for RF exposure requirements for mobile and portable operating conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.