FCC ID MCLT77Z199

TRACKING MODULE

by HON HAI Precision Ind. Co., Ltd.

Grantee Code: MCL   Product Code: T77Z199
Latest application date: 2009-10-22

FCC ID Device Details

FCC IDMCLT77Z199
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMCL
Product CodeT77Z199
Applicant BusinessHON HAI Precision Ind. Co., Ltd. 🇹🇼
Related Domains foxconn.com
Equipment ClassTRACKING MODULE
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.7-848.31 MHzChange in identification of presently authorized equipment. Original FCC ID: J9CCASTRA Grant Date: 06/25/20092009-10-22
2405-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: J9CCASTRA Grant Date: 06/25/20092009-10-22

Exhibits

DocumentTypeAvailableFile
External photosExternal Photos2009-10-22PDF 188.2 KB
Label format and locationID Label/Location Info2009-10-22PDF 13.7 KB
Agent authorizationCover Letter(s)2009-10-22PDF 156.7 KB
Authorization letterCover Letter(s)2009-10-22PDF 156.7 KB
Authorization letter from QualcommCover Letter(s)2009-10-22PDF 20.5 KB
Multiple listing request letterCover Letter(s)2009-10-22PDF 88.4 KB

Application Information

Application IDZKIF1FosDMWl6gI7DrJCJw==
Final Action Date2009-10-22
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: J9CCASTRA Grant Date: 06/25/2009
Applicant FRN0010777365
ModelT77Z199
Frequency Range824.7-848.31 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionTRACKING MODULE
Responsible PartyMrs. Rio Chen, Compliance Deputy Manager, rio.chen@foxconn.com , +886-3-5784975
Test FirmBarbara Judge, Compliance Certification Services, barbara.judge@ccsemc.com , 510-771-1104
TCB Emailmike.kuo@ccsemc.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.31W, Part 24 EIRP 0.76W. Limited modular approval for use as a module in mobile or fixed exposure conditions; antenna gain, including cable loss, must not exceed 7dBi for 850MHz/Cellular band and 4dBi for 1900MHz/PCS band, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation.

Applications

Application IDDatePurpose
ZKIF1FosDMWl6gI7DrJCJw==2009-10-22Change in identification of presently authorized equipment. Original FCC ID: J9CCASTRA Grant Date: 06/25/2009
1PLQj9GtKiJDe6ANi+UzlA==2009-10-22Change in identification of presently authorized equipment. Original FCC ID: J9CCASTRA Grant Date: 06/25/2009

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.7-848.31 MHz0.2462.5ppm1M28F9W22H
1851.25-1908.75 MHz0.2982.5ppm1M28F9W24E
2405-2480 MHz0.002500015C

Grants

TCB Grant - Application ZKIF1FosDMWl6gI7DrJCJw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 10/22/2009

Application Dated: 10/22/2009
HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road
Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLT77Z199
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: TRACKING MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.246 2.5  PM 1M28F9W
24E 1851.25  -  1908.75 0.298 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.31W, Part 24 EIRP 0.76W. Limited modular approval for use as a module in mobile or fixed exposure conditions; antenna gain, including cable loss, must not exceed 7dBi for 850MHz/Cellular band and 4dBi for 1900MHz/PCS band, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation.

EAS Grant - Application ZKIF1FosDMWl6gI7DrJCJw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
  Date of Grant: 10/22/2009

Application Dated: 10/22/2009
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLT77Z199
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: TRACKING MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.246 2.5  PM 1M28F9W
24E 1851.25  -  1908.75 0.298 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.31W, Part 24 EIRP 0.76W. Limited modular approval for use as a module in mobile or fixed exposure conditions; antenna gain, including cable loss, must not exceed 7dBi for 850MHz/Cellular band and 4dBi for 1900MHz/PCS band, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation.



TCB Grant - Application 1PLQj9GtKiJDe6ANi+UzlA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 10/22/2009

Application Dated: 10/22/2009
HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road
Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLT77Z199
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Digital Transmission System
Notes: TRACKING MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2480.0 0.0025  

Output power listed is conducted. This device is co-located in a Part 22/24 module. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.

EAS Grant - Application 1PLQj9GtKiJDe6ANi+UzlA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HON HAI Precision Ind. Co., Ltd.
5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park
Hsinchu,
Taiwan
  Date of Grant: 10/22/2009

Application Dated: 10/22/2009
 
Attention: Mrs. Rio Chen , Compliance Deputy Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCLT77Z199
Name of Grantee:  HON HAI Precision Ind. Co., Ltd.
Equipment Class: Digital Transmission System
Notes: TRACKING MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2480.0 0.0025  

Output power listed is conducted. This device is co-located in a Part 22/24 module. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.



Mail To: