FCC ID MCQ-50M1589
Wireless Embedded ARM Module
by Digi International Inc
Grantee Code: MCQ Product Code: 50M1589
Latest application date: 2010-06-14
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2010-06-14 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2010-06-14 |
| 5180-5240 MHz | Original Equipment | 2009-02-27 |
| 2412-2462 MHz | Original Equipment | 2009-02-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Hardware reference manual | Users Manual | 2009-02-27 | PDF 1.8 MB |
| Internal photos | Internal Photos | 2009-02-27 | PDF 233.2 KB |
| External Photos | External Photos | 2010-06-14 | PDF 415.1 KB |
| External photos | External Photos | 2009-02-27 | PDF 224 KB |
| ID label | ID Label/Location Info | 2009-02-27 | PDF 48.1 KB |
| Test Setup Photos | Test Setup Photos | 2010-06-14 | PDF 374.5 KB |
| Setup photos | Test Setup Photos | 2009-02-27 | PDF 151.7 KB |
| Setup photos | Test Setup Photos | 2009-02-27 | PDF 261.7 KB |
| Test Report 2.4 GHz | Test Report | 2010-06-14 | PDF 3.3 MB |
| Test Report 5 GHz | Test Report | 2010-06-14 | PDF 3 MB |
| Test report | Test Report | 2009-02-27 | PDF 1.8 MB |
| Test report | Test Report | 2009-02-27 | PDF 2.2 MB |
| Request for Permissive Change Class II | Cover Letter(s) | 2010-06-14 | PDF 276.3 KB |
| Confidentiality request | Cover Letter(s) | 2009-02-27 | PDF 47.5 KB |
| Letter of agency | Cover Letter(s) | 2009-02-27 | PDF 45.2 KB |
| Modular approval | Cover Letter(s) | 2009-02-27 | PDF 28.8 KB |
| No ad hoc mode | Cover Letter(s) | 2009-02-27 | PDF 22.9 KB |
| Shutdown on no data | Cover Letter(s) | 2009-02-27 | PDF 624.8 KB |
| RF exposure evaluation | RF Exposure Info | 2009-02-27 | PDF 37.2 KB |
Application Information
| Application ID | heBarf1suRrVKqtuU+vmYg== |
|---|---|
| Final Action Date | 2010-06-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010283307 |
| Model | -50M1589 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless Embedded ARM Module |
| Responsible Party | Scott D McCall, Manager Hardware Engineering, scott.mccall@digi.com  , 952-912-4248 |
| Test Firm | Gerald Schmidt, CETECOM ICT Services GmbH, tcb@cetecom.com  , 49-681-598-0 |
| TCB Email | marcus.steinert@ict.cetecom.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class 2 Permissive Change to allow alternative new antenna. Power output listed is conducted. Modular approval for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20 cm from all persons and must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. End users must be provided with operating and installation instructions to ensure RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| heBarf1suRrVKqtuU+vmYg== | 2010-06-14 | Class II permissive change or modification of presently authorized equipment |
| CrMZ0ZQK8etUkb7IOX9HBQ== | 2010-06-14 | Class II permissive change or modification of presently authorized equipment |
| o6Y2DdyRZ3G9mhymSlYBCw== | 2009-02-27 | Original Equipment |
| GSJmMjJcmMZMNHb1E4+ZQQ== | 2009-02-27 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application o6Y2DdyRZ3G9mhymSlYBCw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 02/27/2009 Application Dated: 02/27/2009 |
| Digi International Inc |
| 11001 Bren Road E. |
| Minnetonka, MN 55343 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-50M1589 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.01 | ||
| ND | 15E | 5260.0 - 5320.0 | 0.0083 | ||
| ND | 15E | 5500.0 - 5700.0 | 0.0195 | ||
| 15E | 5745.0 - 5805.0 | 0.0141 |
| Power output listed is conducted. Modular approval for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20 cm from all persons and must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. This device is restricted to indoor only operations within the 5150-5250 MHz band. End users must be provided with operating and installation instructions to ensure RF exposure compliance. Device is a client-only device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application o6Y2DdyRZ3G9mhymSlYBCw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 11001 Bren Road E. Minnetonka, MN 55343 United States |
Date of Grant: 02/27/2009 Application Dated: 02/27/2009 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-50M1589 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.01 | ||
| ND | 15E | 5260.0 - 5320.0 | 0.0083 | ||
| ND | 15E | 5500.0 - 5700.0 | 0.0195 | ||
| 15E | 5745.0 - 5805.0 | 0.0141 |
| Power output listed is conducted. Modular approval for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20 cm from all persons and must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. This device is restricted to indoor only operations within the 5150-5250 MHz band. End users must be provided with operating and installation instructions to ensure RF exposure compliance. Device is a client-only device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM ICT Services GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 06/14/2010 Application Dated: 06/14/2010 |
| Digi International Inc |
| 11001 Bren Road E. |
| Minnetonka, MN 55343 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-50M1589 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.269 |
| Class 2 Permissive Change to allow alternative new antenna. Power output listed is conducted. Modular approval for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20 cm from all persons and must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. End users must be provided with operating and installation instructions to ensure RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application heBarf1suRrVKqtuU+vmYg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 11001 Bren Road E. Minnetonka, MN 55343 United States |
Date of Grant: 06/14/2010 Application Dated: 06/14/2010 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-50M1589 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.269 |
| Class 2 Permissive Change to allow alternative new antenna. Power output listed is conducted. Modular approval for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20 cm from all persons and must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. End users must be provided with operating and installation instructions to ensure RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 02/27/2009 Application Dated: 02/27/2009 |
| Digi International Inc |
| 11001 Bren Road E. |
| Minnetonka, MN 55343 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-50M1589 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.269 |
| Power output listed is conducted. Modular approval for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20 cm from all persons and must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. End users must be provided with operating and installation instructions to ensure RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application GSJmMjJcmMZMNHb1E4+ZQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 11001 Bren Road E. Minnetonka, MN 55343 United States |
Date of Grant: 02/27/2009 Application Dated: 02/27/2009 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-50M1589 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.269 |
| Power output listed is conducted. Modular approval for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20 cm from all persons and must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. End users must be provided with operating and installation instructions to ensure RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM ICT Services GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 06/14/2010 Application Dated: 06/14/2010 |
| Digi International Inc |
| 11001 Bren Road E. |
| Minnetonka, MN 55343 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-50M1589 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.01 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0083 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0195 | ||
| CC | 15E | 5745.0 - 5805.0 | 0.0141 |
| Class 2 Permissive Change to allow alternative new antenna. Power output listed is conducted. Modular approval for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20 cm from all persons and must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. This device is restricted to indoor only operations within the 5150-5250 MHz band. End users must be provided with operating and installation instructions to ensure RF exposure compliance. Device is a client-only device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application CrMZ0ZQK8etUkb7IOX9HBQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 11001 Bren Road E. Minnetonka, MN 55343 United States |
Date of Grant: 06/14/2010 Application Dated: 06/14/2010 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-50M1589 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.01 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0083 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0195 | ||
| CC | 15E | 5745.0 - 5805.0 | 0.0141 |
| Class 2 Permissive Change to allow alternative new antenna. Power output listed is conducted. Modular approval for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20 cm from all persons and must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. This device is restricted to indoor only operations within the 5150-5250 MHz band. End users must be provided with operating and installation instructions to ensure RF exposure compliance. Device is a client-only device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |