FCC ID MCQ-9XTENDB
XTend RF module
by Digi International Inc
Grantee Code: MCQ Product Code: 9XTENDB
Latest application date: 2014-01-24
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.9-927.1 MHz | Class II permissive change or modification of presently authorized equipment | 2014-01-24 |
| 902.9-927.1 MHz | Class II permissive change or modification of presently authorized equipment | 2013-01-18 |
| 902.9-927.1 MHz | Original Equipment | 2012-09-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Updated User Manual | Users Manual | 2013-01-18 | PDF 1.4 MB |
| User Manual | Users Manual | 2012-09-19 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2012-09-19 | PDF 467.4 KB |
| External Photos_New Antenna | External Photos | 2013-01-18 | PDF 170.9 KB |
| External Photo | External Photos | 2012-09-19 | PDF 1.6 MB |
| Label & Location | ID Label/Location Info | 2012-09-19 | PDF 69.9 KB |
| Setup Photos | Test Setup Photos | 2014-01-24 | PDF 262.5 KB |
| Setup Photos | Test Setup Photos | 2013-01-18 | PDF 380.5 KB |
| Test Setup Photos | Test Setup Photos | 2012-09-19 | PDF 1.3 MB |
| Test Report | Test Report | 2014-01-24 | PDF 331.3 KB |
| Test Report | Test Report | 2013-01-18 | PDF 320.7 KB |
| Test Report | Test Report | 2012-09-19 | PDF 1.3 MB |
| Modular Request | Attestation Statements | 2012-09-19 | PDF 867.8 KB |
| Part 15B letter | Attestation Statements | 2012-09-19 | PDF 160.6 KB |
| Applicant C2PC Letter | Cover Letter(s) | 2014-01-24 | PDF 174 KB |
| Authority Letter | Cover Letter(s) | 2014-01-24 | PDF 191.8 KB |
| Authority_Grantee Contact_Rev | Cover Letter(s) | 2014-01-24 | PDF 135.7 KB |
| Confidentiality Letter | Cover Letter(s) | 2014-01-24 | PDF 153.5 KB |
| Cover Letter | Cover Letter(s) | 2014-01-24 | PDF 55.8 KB |
| Authority Letter | Cover Letter(s) | 2013-01-18 | PDF 206.4 KB |
| Cover Letter | Cover Letter(s) | 2013-01-18 | PDF 49.7 KB |
| Original Grantee Authorization | Cover Letter(s) | 2013-01-18 | PDF 133.2 KB |
| Authority Letter | Cover Letter(s) | 2012-09-19 | PDF 204.2 KB |
| Confidentiality Letter | Cover Letter(s) | 2012-09-19 | PDF 179.3 KB |
| Cover Letter | Cover Letter(s) | 2012-09-19 | PDF 48.3 KB |
| RF Exposure Info | RF Exposure Info | 2014-01-24 | PDF 70 KB |
| RF Expo Info | RF Exposure Info | 2013-01-18 | PDF 116.9 KB |
| RF Exposure Info | RF Exposure Info | 2012-09-19 | PDF 68.9 KB |
Application Information
| Application ID | lHmBxeNEFLhbQ/a9RwTqTg== |
|---|---|
| Final Action Date | 2014-01-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010283307 |
| Model | -9XTENDB |
| Frequency Range | 902.9-927.1 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | XTend RF module |
| Responsible Party | Scott D McCall, Manager Hardware Engineering, scott.mccall@digi.com  , 952-912-4248 |
| Agent | Dan Dan Dan, UltraTech Engineering Labs Inc, dan@ultratech-labs.com  , 905-829-1570 |
| Test Firm | Dharmajit Solanki, UltraTech Engineering Labs Inc., dharmajit@ultratech-labs.com , 905-829-1570 |
| TCB Email | vic@ultratech-labs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval, power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF Exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons. Antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Class II Permissive Changes: adds an external Disc Patch Antenna, Part No.:51-43-8227, Gain: 0 dBi, Connector type: MMCX. Class II Permissive Changes: 0603 wire wound 6.8 nH was changed to a ferrite bead 0603 – 220 ohms to reduce harmonic spurious emissions, and Single Pole Double Throw RF switches were changed in three places. Note : Output power is continuously variable from the value listed to 0.1% of this value. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| lHmBxeNEFLhbQ/a9RwTqTg== | 2014-01-24 | Class II permissive change or modification of presently authorized equipment |
| kuJuqBk8+mAmIc6QXHqY5w== | 2013-01-18 | Class II permissive change or modification of presently authorized equipment |
| Higup3pjFT/BvGZom49a3g== | 2012-09-19 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.9-927.1 MHz | 1.0000000 | 15C |
Grants
TCB Grant - Application lHmBxeNEFLhbQ/a9RwTqTg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 01/24/2014 Application Dated: 01/24/2014 |
| Digi International Inc |
| 11001 Bren Road E. |
| Minnetonka, MN 55343 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-9XTENDB |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | XTend RF module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 |
| Limited Modular Approval, power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF Exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons. Antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Class II Permissive Changes: adds an external Disc Patch Antenna, Part No.:51-43-8227, Gain: 0 dBi, Connector type: MMCX. Class II Permissive Changes: 0603 wire wound 6.8 nH was changed to a ferrite bead 0603 – 220 ohms to reduce harmonic spurious emissions, and Single Pole Double Throw RF switches were changed in three places. Note : Output power is continuously variable from the value listed to 0.1% of this value. |
EAS Grant - Application lHmBxeNEFLhbQ/a9RwTqTg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 11001 Bren Road E. Minnetonka, MN 55343 United States |
Date of Grant: 01/24/2014 Application Dated: 01/24/2014 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-9XTENDB |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | XTend RF module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 |
| Limited Modular Approval, power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF Exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons. Antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Class II Permissive Changes: adds an external Disc Patch Antenna, Part No.:51-43-8227, Gain: 0 dBi, Connector type: MMCX. Class II Permissive Changes: 0603 wire wound 6.8 nH was changed to a ferrite bead 0603 – 220 ohms to reduce harmonic spurious emissions, and Single Pole Double Throw RF switches were changed in three places. Note : Output power is continuously variable from the value listed to 0.1% of this value. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 01/18/2013 Application Dated: 01/18/2013 |
| Digi International Inc |
| 11001 Bren Road E. |
| Minnetonka, MN 55343 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-9XTENDB |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | XTend RF module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 |
| Limited Modular Approval, power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF Exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons. Antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Class II Permissive Change adds an external Disc Patch Antenna, Part No.:51-43-8227, Gain: 0 dBi, Connector type: MMCX. Note : Output power is continuously variable from the value listed to 0.1% of this value. |
EAS Grant - Application kuJuqBk8+mAmIc6QXHqY5w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 11001 Bren Road E. Minnetonka, MN 55343 United States |
Date of Grant: 01/18/2013 Application Dated: 01/18/2013 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-9XTENDB |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | XTend RF module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 |
| Limited Modular Approval, power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF Exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons. Antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Class II Permissive Change adds an external Disc Patch Antenna, Part No.:51-43-8227, Gain: 0 dBi, Connector type: MMCX. Note : Output power is continuously variable from the value listed to 0.1% of this value. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 09/19/2012 Application Dated: 09/19/2012 |
| Digi International Inc |
| 11001 Bren Road E. |
| Minnetonka, MN 55343 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-9XTENDB |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | XTend RF module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 |
| Limited Modular Approval, power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF Exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons. Antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note : Output power is continuously variable from the value listed to 0.1% of this value. |
EAS Grant - Application Higup3pjFT/BvGZom49a3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 11001 Bren Road E. Minnetonka, MN 55343 United States |
Date of Grant: 09/19/2012 Application Dated: 09/19/2012 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-9XTENDB |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | XTend RF module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.9 - 927.1 | 1.0 |
| Limited Modular Approval, power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF Exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons. Antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note : Output power is continuously variable from the value listed to 0.1% of this value. |
| Mail To: |