FCC ID MCQ-CC93
Communication Module
by Digi International Inc
Grantee Code: MCQ Product Code: CC93
Latest application date: 2025-03-13
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-03-13 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-03-13 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-03-13 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBES5PL2EL Grant Date: 04/14/2023 | 2024-12-17 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBES5PL2EL Grant Date: 04/14/2023 | 2024-12-17 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBES5PL2EL Grant Date: 09/05/2023 | 2024-12-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| LBES5PL2EL (LBEE5PL2DL) User Manual | Users Manual | 2024-12-17 | PDF 365 KB |
| Internal Photos | Internal Photos | 2025-03-13 | PDF 1.9 MB |
| External Photos | External Photos | 2025-03-13 | PDF 1.9 MB |
| External photos | External Photos | 2025-03-13 | PDF 1.9 MB |
| External Photos | External Photos | 2024-12-17 | PDF 106 KB |
| LABEL | ID Label/Location Info | 2025-03-13 | PDF 205.5 KB |
| Label | ID Label/Location Info | 2025-03-13 | PDF 205.5 KB |
| Label & Location | ID Label/Location Info | 2024-12-17 | PDF 483.2 KB |
| T Setup photos | Test Setup Photos | 2025-03-13 | PDF 536.9 KB |
| Test Setup photo | Test Setup Photos | 2025-03-13 | PDF 536.9 KB |
| Antenna spec | Test Report | 2025-03-13 | PDF 1.9 MB |
| Antenna spec GW.48.A151 | Test Report | 2025-03-13 | PDF 4.5 MB |
| Antenna spec PCB 2400-5000 | Test Report | 2025-03-13 | PDF 501 KB |
| Antenna spec-db1-raf-ccc-ds | Test Report | 2025-03-13 | PDF 1.7 MB |
| FCC 15.247 ISED RSS-247 | Test Report | 2025-03-13 | PDF 2.3 MB |
| FCC 15.247 ISED RSS-247 WiFi | Test Report | 2025-03-13 | PDF 2.5 MB |
| Rev A ConnectCore 93 FCC 15.407 | Test Report | 2025-03-13 | PDF 3.4 MB |
| Test Report | Test Report | 2025-03-13 | PDF 2.3 MB |
| 2.911 (d)(5)(II) Certification Equipment Type v1.2 | Attestation Statements | 2025-03-13 | PDF 149 KB |
| 2.911 (d)(5)(i) Certification Equipment Type v1.2 | Attestation Statements | 2025-03-13 | PDF 154.6 KB |
| 2.911 (d)(5)(i)CertificationEquipmentTypev1.2 | Attestation Statements | 2025-03-13 | PDF 154.6 KB |
| 2.911 (d)(5)(ii) Certificiation Applicant v1.3 | Attestation Statements | 2025-03-13 | PDF 149 KB |
| 2.911 (d)(5)(ii)CertificiationApplicantv1.2 | Attestation Statements | 2025-03-13 | PDF 149 KB |
| 2.911 (d)(7) US Agent for Service of Process v1.4 | Attestation Statements | 2025-03-13 | PDF 151.4 KB |
| Attestation for Module Integration | Attestation Statements | 2024-12-17 | PDF 229.6 KB |
| Certification Equipment Type | Attestation Statements | 2024-12-17 | PDF 524.6 KB |
| Certificiation Applicant | Attestation Statements | 2024-12-17 | PDF 450.1 KB |
| US Agent for Service of Process | Attestation Statements | 2024-12-17 | PDF 410.5 KB |
| FCC Class II PC request letter Rev1.1 | Cover Letter(s) | 2025-03-13 | PDF 21 KB |
| Letter of Authorization Rev 1.0 | Cover Letter(s) | 2025-03-13 | PDF 217.5 KB |
| LetterofAuthorizationRev1.0 | Cover Letter(s) | 2025-03-13 | PDF 217.5 KB |
| Modular Approval Letter | Cover Letter(s) | 2025-03-13 | PDF 138.8 KB |
| Authorization letter | Cover Letter(s) | 2024-12-17 | PDF 189.8 KB |
| FCC Authorization from Original Grantee | Cover Letter(s) | 2024-12-17 | PDF 31.2 KB |
| FCC Authorized Signatories | Cover Letter(s) | 2024-12-17 | PDF 78.1 KB |
| FCC Request for Change in ID - R1 | Cover Letter(s) | 2024-12-17 | PDF 240.1 KB |
| FCC Request for change in ID Metadata only | Cover Letter(s) | 2024-12-17 | PDF 274.7 KB |
| Letter of Authorization | Cover Letter(s) | 2024-12-17 | PDF 189.8 KB |
| MPE | RF Exposure Info | 2025-03-13 | PDF 182.1 KB |
Application Information
| Application ID | Puef+GEG6HoHS4MOPbOQEA== |
|---|---|
| Final Action Date | 2025-03-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010283307 |
| Model | CC93 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Communication Module |
| Responsible Party | Erik Reynolds, Director of Engineering, erik.reynolds@digi.com  , 952-912-4248 |
| Technical Contact | Digi International Inc, erik.reynolds@digi.com |
| Test Firm | Gordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com  , 925-462-0304 |
| TCB Email | certification@micomlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. Class II permissive change for adding new antenna with host, ConnectCore CC93. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Puef+GEG6HoHS4MOPbOQEA== | 2025-03-13 | Class II permissive change or modification of presently authorized equipment |
| OqkHDmq2e17iFC2nEahxBw== | 2025-03-13 | Class II permissive change or modification of presently authorized equipment |
| 6iVLWh+94HORR9y2HeqNoA== | 2025-03-13 | Class II permissive change or modification of presently authorized equipment |
| gLq/A6h4rECUsJ2uun2zcw== | 2024-12-17 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBES5PL2EL Grant Date: 04/14/2023 |
| SWV7F37LdUq+jcPWLc0O0g== | 2024-12-17 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBES5PL2EL Grant Date: 04/14/2023 |
| JrO1znWP2uuEhPcEcYFDjQ== | 2024-12-17 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBES5PL2EL Grant Date: 09/05/2023 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0420000 | 15C | CC |
| 2402-2480 MHz | 0.0420000 | CC | |
| 2402-2480 MHz | 0.04 | 15C | CC |
| 2402-2480 MHz | 0.04 | CC | |
| 2405-2480 MHz | 0.239 | 15C | CC |
| 2405-2480 MHz | 0.239 | CC | |
| 2412-2462 MHz | 0.202 | 15C | CC |
| 5180-5240 MHz | 0.061 | 15E | CC |
| 5180-5240 MHz | 0.061 | CC | |
| 5260-5320 MHz | 0.061 | 15E | CC |
| 5260-5320 MHz | 0.061 | CC | |
| 5500-5720 MHz | 0.063 | 15E | CC |
| 5500-5720 MHz | 0.063 | CC | |
| 5745-5825 MHz | 0.062 | 15E | CC |
| 5745-5825 MHz | 0.062 | CC |
Grants
TCB Grant - Application SWV7F37LdUq+jcPWLc0O0g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/17/2024 Application Dated: 11/13/2024 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CC93 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.042 |
| Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SWV7F37LdUq+jcPWLc0O0g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 12/17/2024 Application Dated: 11/13/2024 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CC93 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.042 |
| Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 03/13/2025 Application Dated: 03/13/2025 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CC93 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2405.0 - 2480.0 | 0.239 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.04 |
| Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. Class II permissive change for adding new antenna with host, ConnectCore CC93. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application OqkHDmq2e17iFC2nEahxBw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 03/13/2025 Application Dated: 03/13/2025 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CC93 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.042 |
| Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Class II permissive change for adding new antenna with host, ConnectCore CC93. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application JrO1znWP2uuEhPcEcYFDjQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/17/2024 Application Dated: 11/13/2024 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CC93 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2405.0 - 2480.0 | 0.239 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.04 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.202 |
| Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application JrO1znWP2uuEhPcEcYFDjQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 12/17/2024 Application Dated: 11/13/2024 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CC93 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2405.0 - 2480.0 | 0.239 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.04 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.202 |
| Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/17/2024 Application Dated: 11/13/2024 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CC93 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.061 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.061 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.063 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.062 |
| Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gLq/A6h4rECUsJ2uun2zcw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 12/17/2024 Application Dated: 11/13/2024 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CC93 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.061 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.061 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.063 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.062 |
| Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 03/13/2025 Application Dated: 03/13/2025 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CC93 |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.061 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.061 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.063 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.062 |
| Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz modes. Class II permissive change for adding new antenna with host, ConnectCore CC93. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |