FCC ID MCQ-PS2CSM
XBee Pro S2C SMT Module
by Digi International Inc
Grantee Code: MCQ Product Code: PS2CSM
Latest application date: 2022-01-21
Device Images
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-21 |
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-03 |
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2015-12-09 |
| 2405-2475 MHz | Original Equipment | 2014-10-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2022-01-21 | PDF 305.4 KB |
| User Manual | Users Manual | 2016-05-03 | PDF 1.8 MB |
| User Manual | Users Manual | 2015-12-09 | PDF 3.6 MB |
| User manual | Users Manual | 2014-10-16 | PDF 3.8 MB |
| Internal Photos | Internal Photos | 2014-10-16 | PDF 687.9 KB |
| Antenna Photos | External Photos | 2014-10-16 | PDF 504.3 KB |
| External Photos | External Photos | 2014-10-16 | PDF 786.5 KB |
| Label & Location | ID Label/Location Info | 2014-10-16 | PDF 397.3 KB |
| Setup Photos | Test Setup Photos | 2016-05-03 | PDF 647 KB |
| Test Setup Photos | Test Setup Photos | 2015-12-09 | PDF 546.6 KB |
| Test Setup Photos | Test Setup Photos | 2014-10-16 | PDF 1.5 MB |
| Using Original Test Reports | Attestation Statements | 2022-01-21 | PDF 38.9 KB |
| Test Report | Test Report | 2016-05-03 | PDF 1 MB |
| Test Report | Test Report | 2015-12-09 | PDF 969.3 KB |
| Test Report | Test Report | 2014-10-16 | PDF 1.5 MB |
| Grantee Contact Authorization | Attestation Statements | 2016-05-03 | PDF 135.7 KB |
| Duty Cycle Attestation | Attestation Statements | 2014-10-16 | PDF 154.5 KB |
| Modular Request Ltr | Attestation Statements | 2014-10-16 | PDF 1,014.8 KB |
| Part 15B attestation | Attestation Statements | 2014-10-16 | PDF 154 KB |
| Agent Authorization | Cover Letter(s) | 2022-01-21 | PDF 34.5 KB |
| C2PC Request | Cover Letter(s) | 2022-01-21 | PDF 34.3 KB |
| Authority Letter | Cover Letter(s) | 2016-05-03 | PDF 208.3 KB |
| C2PC Request Letter | Cover Letter(s) | 2016-05-03 | PDF 175.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2016-05-03 | PDF 175.5 KB |
| Cover Letter | Cover Letter(s) | 2016-05-03 | PDF 95.1 KB |
| Agent Authorization Letter | Cover Letter(s) | 2015-12-09 | PDF 203.3 KB |
| C2PC Letter | Cover Letter(s) | 2015-12-09 | PDF 33.1 KB |
| Confidentiality Request | Cover Letter(s) | 2015-12-09 | PDF 34.4 KB |
| Cover Letter | Cover Letter(s) | 2015-12-09 | PDF 61.9 KB |
| Grantee Authorization | Cover Letter(s) | 2015-12-09 | PDF 135.7 KB |
| Authority Letter | Cover Letter(s) | 2014-10-16 | PDF 195.6 KB |
| Confidentiality Letter | Cover Letter(s) | 2014-10-16 | PDF 176.8 KB |
| Cover Letter | Cover Letter(s) | 2014-10-16 | PDF 91.5 KB |
| Original Grantee Authorization | Cover Letter(s) | 2014-10-16 | PDF 135.7 KB |
| MPE Evaluation for Co-location | RF Exposure Info | 2022-01-21 | PDF 59.2 KB |
| MPE Evaluation from MCQ-PS2CSM | RF Exposure Info | 2022-01-21 | PDF 68.1 KB |
| MPE Evaluation from MCQ-X2EWIFI | RF Exposure Info | 2022-01-21 | PDF 217.5 KB |
| MPE Evaluation from RI7LE910NAV2 | RF Exposure Info | 2022-01-21 | PDF 776.3 KB |
| RF Exposure Info | RF Exposure Info | 2016-05-03 | PDF 101.4 KB |
| MPE Evaluation | RF Exposure Info | 2015-12-09 | PDF 68.8 KB |
| RF Exposure | RF Exposure Info | 2014-10-16 | PDF 103.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 115 KB | |
| Schematics Metadata only | Schematics | PDF 262.4 KB | |
| Op Descrp_Duty Cycle Metadata only | Operational Description | PDF 19.6 KB | |
| Operation Description Metadata only | Operational Description | PDF 122.1 KB | |
| Operational Description Metadata only | Operational Description | PDF 19.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 93.1 KB |
Application Information
| Application ID | PT211fyGbf5Q5mzuvfZddA== |
|---|---|
| Final Action Date | 2022-01-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010283307 |
| Model | PS2CSM |
| Frequency Range | 2405-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | XBee Pro S2C SMT Module |
| Responsible Party | Erik Reynolds, Director of Engineering, erik.reynolds@digi.com  , 952-912-4248 |
| Agent | Dan Dan Dan, UltraTech Engineering Labs Inc, dan@ultratech-labs.com  , 905-829-1570 |
| Test Firm | Tri Luu, UltraTech Engineering Labs Inc, tri@ultratech-labs.com , 905-829-1570 |
| TCB Email | vic@ultratech-labs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power output listed is conducted. The output power is continuously variable from 0.849 mW to 87.5 mW. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF exposure conditions, the antenna used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons. Transmitter antenna types, gains and installation shall meet the requirements as instructed in the user’s manual and shall not be collocated or operating in conjunction with any other antenna or transmitter. Antennas with the maximum gain allowed are 15.0 dBi Omni-Directional, 15.0 dBi Yagi, 19.0 dBi Flat Panel, 2.1 dBi Dipole and 1.5 dBi Monopole (integrated whip). Class II Permissive Change to enable additional channel (2480 MHz). Power output is reduced to 4.246 mWatts by firmware as described in this filing. Class II Permissive Change adds a new firmware option which uses RF duty cycle of up to 66% and output power limited to 0.07907 Watts and frequency to 2405-2470 MHz. Class II Permissive Change for co-location with Telit Communications S.p.A LE910-NA1 LTE /3G Module (FCC ID: RI7LE910NAV2) or Digi International ConnectPort X2e Wi-Fi (FCC ID: MCQ-X2EWIFI) as documented in this filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 32 cm. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| PT211fyGbf5Q5mzuvfZddA== | 2022-01-21 | Class II permissive change or modification of presently authorized equipment |
| XD7otMtOvVXELl+iSjgTjg== | 2016-05-03 | Class II permissive change or modification of presently authorized equipment |
| 0IHlFN42oYt76hrxygzxFg== | 2015-12-09 | Class II permissive change or modification of presently authorized equipment |
| ZlATMixjvxC+3qMYZ1T3JA== | 2014-10-16 | Original Equipment |
Grants
TCB Grant - Application ZlATMixjvxC+3qMYZ1T3JA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 10/16/2014 Application Dated: 10/15/2014 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-PS2CSM |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee ZB SMT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.0875 |
| Single Modular Approval. Power output listed is conducted. The output power is continuously variable from 0.849 mW to 87.5 mW. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF Exposure conditions, the antenna used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons. Transmitter antenna types, gains and installation shall meet the requirements as instructed in the user’s manual and shall not be collocated or operating in conjunction with any other antenna or transmitter. Antennas with the maximum gain allowed are 15.0 dBi Omni-Directional, 15.0 dBi Yagi, 19.0 dBi Flat Panel, 2.1 dBi Dipole and 1.5 dBi Monopole (integrated whip). |
EAS Grant - Application ZlATMixjvxC+3qMYZ1T3JA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 10/16/2014 Application Dated: 10/15/2014 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-PS2CSM |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee ZB SMT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.0875 |
| Single Modular Approval. Power output listed is conducted. The output power is continuously variable from 0.849 mW to 87.5 mW. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF Exposure conditions, the antenna used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons. Transmitter antenna types, gains and installation shall meet the requirements as instructed in the user’s manual and shall not be collocated or operating in conjunction with any other antenna or transmitter. Antennas with the maximum gain allowed are 15.0 dBi Omni-Directional, 15.0 dBi Yagi, 19.0 dBi Flat Panel, 2.1 dBi Dipole and 1.5 dBi Monopole (integrated whip). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 05/03/2016 Application Dated: 05/03/2016 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-PS2CSM |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBEE Pro S2C SMT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.0875 |
| Single Modular Approval. Power output listed is conducted. The output power is continuously variable from 0.849 mw to 87.5 mw. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF exposure conditions, the antenna used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons. Transmitter antenna types, gains and installation shall meet the requirements as instructed in the user’s manual and shall not be collocated or operating in conjunction with any other antenna or transmitter. Antennas with the maximum gain allowed are 15.0 dbi Omni-Directional, 15.0 dbi Yagi, 19.0 dbi Flat Panel, 2.1 dbi Dipole and 1.5 dbi Monopole (integrated whip). Class II Permissive Change to enable additional channel (2480 MHz). Power output is reduced to 4.246 mWatts by firmware as described in this filing. Class II Permissive Change adds a new firmware option which uses RF duty cycle of up to 66% and output power limited to 0.07907 Watts and frequency to 2405-2470 MHz. |
EAS Grant - Application XD7otMtOvVXELl+iSjgTjg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 05/03/2016 Application Dated: 05/03/2016 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-PS2CSM |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBEE Pro S2C SMT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.0875 |
| Single Modular Approval. Power output listed is conducted. The output power is continuously variable from 0.849 mw to 87.5 mw. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF exposure conditions, the antenna used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons. Transmitter antenna types, gains and installation shall meet the requirements as instructed in the user’s manual and shall not be collocated or operating in conjunction with any other antenna or transmitter. Antennas with the maximum gain allowed are 15.0 dbi Omni-Directional, 15.0 dbi Yagi, 19.0 dbi Flat Panel, 2.1 dbi Dipole and 1.5 dbi Monopole (integrated whip). Class II Permissive Change to enable additional channel (2480 MHz). Power output is reduced to 4.246 mWatts by firmware as described in this filing. Class II Permissive Change adds a new firmware option which uses RF duty cycle of up to 66% and output power limited to 0.07907 Watts and frequency to 2405-2470 MHz. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 01/21/2022 Application Dated: 01/21/2022 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-PS2CSM |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee Pro S2C SMT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.0875 |
| Single Modular Approval. Power output listed is conducted. The output power is continuously variable from 0.849 mW to 87.5 mW. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF exposure conditions, the antenna used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons. Transmitter antenna types, gains and installation shall meet the requirements as instructed in the user’s manual and shall not be collocated or operating in conjunction with any other antenna or transmitter. Antennas with the maximum gain allowed are 15.0 dBi Omni-Directional, 15.0 dBi Yagi, 19.0 dBi Flat Panel, 2.1 dBi Dipole and 1.5 dBi Monopole (integrated whip). Class II Permissive Change to enable additional channel (2480 MHz). Power output is reduced to 4.246 mWatts by firmware as described in this filing. Class II Permissive Change adds a new firmware option which uses RF duty cycle of up to 66% and output power limited to 0.07907 Watts and frequency to 2405-2470 MHz. Class II Permissive Change for co-location with Telit Communications S.p.A LE910-NA1 LTE /3G Module (FCC ID: RI7LE910NAV2) or Digi International ConnectPort X2e Wi-Fi (FCC ID: MCQ-X2EWIFI) as documented in this filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 32 cm. |
EAS Grant - Application PT211fyGbf5Q5mzuvfZddA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 01/21/2022 Application Dated: 01/21/2022 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-PS2CSM |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee Pro S2C SMT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.0875 |
| Single Modular Approval. Power output listed is conducted. The output power is continuously variable from 0.849 mW to 87.5 mW. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF exposure conditions, the antenna used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons. Transmitter antenna types, gains and installation shall meet the requirements as instructed in the user’s manual and shall not be collocated or operating in conjunction with any other antenna or transmitter. Antennas with the maximum gain allowed are 15.0 dBi Omni-Directional, 15.0 dBi Yagi, 19.0 dBi Flat Panel, 2.1 dBi Dipole and 1.5 dBi Monopole (integrated whip). Class II Permissive Change to enable additional channel (2480 MHz). Power output is reduced to 4.246 mWatts by firmware as described in this filing. Class II Permissive Change adds a new firmware option which uses RF duty cycle of up to 66% and output power limited to 0.07907 Watts and frequency to 2405-2470 MHz. Class II Permissive Change for co-location with Telit Communications S.p.A LE910-NA1 LTE /3G Module (FCC ID: RI7LE910NAV2) or Digi International ConnectPort X2e Wi-Fi (FCC ID: MCQ-X2EWIFI) as documented in this filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance with the minimum separation distance of 32 cm. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 12/09/2015 Application Dated: 12/09/2015 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-PS2CSM |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee ZB SMT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.0875 |
| Single Modular Approval. Power output listed is conducted. The output power is continuously variable from 0.849 mW to 87.5 mW. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF Exposure conditions, the antenna used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons. Transmitter antenna types, gains and installation shall meet the requirements as instructed in the user’s manual and shall not be collocated or operating in conjunction with any other antenna or transmitter. Antennas with the maximum gain allowed are 15.0 dBi Omni-Directional, 15.0 dBi Yagi, 19.0 dBi Flat Panel, 2.1 dBi Dipole and 1.5 dBi Monopole (integrated whip). Class II Permissive Change to enable additional channel (2480 MHz). Power output is reduced to 4.246 mWatts by firmware as described in this filing. |
EAS Grant - Application 0IHlFN42oYt76hrxygzxFg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 12/09/2015 Application Dated: 12/09/2015 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-PS2CSM |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee ZB SMT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.0875 |
| Single Modular Approval. Power output listed is conducted. The output power is continuously variable from 0.849 mW to 87.5 mW. This module may only be installed by the OEM or an OEM integrator. For operations in mobile RF Exposure conditions, the antenna used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons. Transmitter antenna types, gains and installation shall meet the requirements as instructed in the user’s manual and shall not be collocated or operating in conjunction with any other antenna or transmitter. Antennas with the maximum gain allowed are 15.0 dBi Omni-Directional, 15.0 dBi Yagi, 19.0 dBi Flat Panel, 2.1 dBi Dipole and 1.5 dBi Monopole (integrated whip). Class II Permissive Change to enable additional channel (2480 MHz). Power output is reduced to 4.246 mWatts by firmware as described in this filing. |
| Mail To: |