1. FCC ID
  2. MCQ
  3. MCQ-XB3C2

FCC ID MCQ-XB3C2

XB3C2

by Digi International Inc

Grantee Code: MCQ   Product Code: XB3C2
Latest application date: 2026-06-05

FCC ID Device Details

FCC IDMCQ-XB3C2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMCQ
Product CodeXB3C2
Applicant BusinessDigi International Inc 🇺🇸
Related Domains digi.com
Equipment ClassXB3C2
Test FirmMiCOM Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2026-06-05
2402-2480 MHzOriginal Equipment2023-03-03

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-03-03PDF 312.5 KB
Internal PhotosInternal Photos2023-03-03PDF 578.8 KB
External PhotosExternal Photos2023-03-03PDF 578.8 KB
Host Label & Location InformationID Label/Location Info2026-06-05PDF 260 KB
ID labelID Label/Location Info2023-03-03PDF 2.7 MB
Antenna InfoOperational Description2023-03-03PDF 3.4 MB
Modular Integration InstructionsOperational Description2023-03-03PDF 71.2 KB
Test Setup Photos (Host XH-900-CW1-001)Test Setup Photos2026-06-05PDF 1.5 MB
Test Setup Photos (Host XH-WS0-CW1-001)Test Setup Photos2026-06-05PDF 1.1 MB
Test Setup Photos (HostXH-24P-CW1-001)Test Setup Photos2026-06-05PDF 1.2 MB
Test Setup PhotosTest Setup Photos2023-03-03PDF 1.5 MB
Antenna InformationTest Report2026-06-05PDF 3.4 MB
Test Report (Tx Host XH-24P-CW1-001) licensedTest Report2026-06-05PDF 1.4 MB
Test Report (Tx Host XH-24P-CW1-001) unlicensedTest Report2026-06-05PDF 1.5 MB
Test Report (Tx Host XH-900-CW1-001) licensedTest Report2026-06-05PDF 1.2 MB
Test Report (Tx Host XH-900-CW1-001) unlicensedTest Report2026-06-05PDF 1.5 MB
Test Report (Tx Host XH-WS0-CW1-001) licensedTest Report2026-06-05PDF 1.4 MB
Test Report (Tx Host XH-WS0-CW1-001) unlicensedTest Report2026-06-05PDF 1.5 MB
Test report part 1 of 2Test Report2023-03-03PDF 4.1 MB
Test report part 2 of 2Test Report2023-03-03PDF 3.2 MB
2.911_(d)(5)(i) Certification Equipment TypeAttestation Statements2026-06-05PDF 172.3 KB
2.911_(d)(5)(ii) Certification ApplicantAttestation Statements2026-06-05PDF 149.2 KB
2.911_(d)(7) US Agent for Service of ProcessAttestation Statements2026-06-05PDF 125.4 KB
Attestation for US AgentAttestation Statements2023-03-03PDF 47.2 KB
Attestation regarding covered equipmentAttestation Statements2023-03-03PDF 514.8 KB
Authorized SignatoriesCover Letter(s)2026-06-05PDF 78.1 KB
Host Letter of Similarity (XH-24P-CW1-001)Cover Letter(s)2026-06-05PDF 165.1 KB
Host Letter of Similarity (XH-900-CW1-001)Cover Letter(s)2026-06-05PDF 165.1 KB
Host Letter of Similarity (XH-WS0-CW1-001)Cover Letter(s)2026-06-05PDF 165 KB
Letter of AuthorizationCover Letter(s)2026-06-05PDF 131.3 KB
Permissive Change Request LetterCover Letter(s)2026-06-05PDF 160.5 KB
Agent Authorization LetterCover Letter(s)2023-03-03PDF 193.8 KB
Cover LetterCover Letter(s)2023-03-03PDF 84.4 KB
Modular Approval LetterCover Letter(s)2023-03-03PDF 90.7 KB
Request for confidentialityCover Letter(s)2023-03-03PDF 131.8 KB
RF Exposure Evaluation (Host XH-24P-CW1-001)RF Exposure Info2026-06-05PDF 288.2 KB
RF Exposure Evaluation (Host XH-900-CW1-001)RF Exposure Info2026-06-05PDF 288.1 KB
RF Exposure Evaluation (Host XH-WS0-CW1-001)RF Exposure Info2026-06-05PDF 283.2 KB
RF ExposureRF Exposure Info2023-03-03PDF 1.1 MB
Frequency Block Diagram Metadata onlyBlock DiagramPDF 63.9 KB
Schematics Metadata onlySchematicsPDF 2.1 MB
operational description Metadata onlyOperational DescriptionPDF 303.5 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 134.5 KB

Application Information

Application IDh5jwJHzGSAhk9ujvZ7W9Pw==
Final Action Date2026-06-05
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0010283307
ModelXB3C2
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionXB3C2
Responsible PartyErik Reynolds, erik.reynolds@digi.com , 952-912-4248
Non-Technical ContactErik Reynolds, Digi International Inc, erik.reynolds@digi.com , 952-912-3444
Test FirmGordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com , 925-462-0304
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
h5jwJHzGSAhk9ujvZ7W9Pw==2026-06-05Class II permissive change or modification of presently authorized equipment
wjue4iznSf0y9peA6dg+nA==2023-03-03Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.005000015C

Grants

TCB Grant - Application wjue4iznSf0y9peA6dg+nA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Portland - Evergreen
6775 NE Evergreen Parkway, Suite 400
Hillsboro, OR 97124
 Date of Grant: 03/03/2023

Application Dated: 03/03/2023
Digi International Inc
9350 Excelsior Blvd.
Suite 700
Hopkins, MN 55343
 
Attention: Erik Reynolds , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCQ-XB3C2
Name of Grantee:  Digi International Inc
Equipment Class: Digital Transmission System
Notes: XB3C2 (HW PN 55002112-02, HW PN 55002112-03)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.005  

Single modular approval. Output power is conducted. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must follow the integration instructions provided by the module manufacturer and must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

RF exposure compliance is addressed for §1.1310 and §2.1091 MPE limits when assessed with the cellular radio modules described in this filing. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 21 cm and any additional testing and authorization process as required.


EAS Grant - Application wjue4iznSf0y9peA6dg+nA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Digi International Inc
9350 Excelsior Blvd. Suite 700
Hopkins, MN 55343
United States 		  Date of Grant: 03/03/2023

Application Dated: 03/03/2023
 
Attention: Erik Reynolds , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCQ-XB3C2
Name of Grantee:  Digi International Inc
Equipment Class: Digital Transmission System
Notes: XB3C2 (HW PN 55002112-02, HW PN 55002112-03)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.005  

Single modular approval. Output power is conducted. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must follow the integration instructions provided by the module manufacturer and must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

RF exposure compliance is addressed for §1.1310 and §2.1091 MPE limits when assessed with the cellular radio modules described in this filing. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 21 cm and any additional testing and authorization process as required.



TCB Grant - Application h5jwJHzGSAhk9ujvZ7W9Pw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/05/2026

Application Dated: 06/05/2026
Digi International Inc
9350 Excelsior Blvd.
Suite 700
Hopkins, MN 55343
 
Attention: Erik Reynolds , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MCQ-XB3C2
Name of Grantee:  Digi International Inc
Equipment Class: Digital Transmission System
Notes: XB3C2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.005  

Single modular approval. Output power is conducted. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must follow the integration instructions provided by the module manufacturer and must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Class II permissive change to enable co-location and simultaneous operation with other radio transmitters. RF exposure compliance is addressed for §1.1310 and §2.1091 MPE limits when assessed with the cellular radio modules described in this filing. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 27 cm and any additional testing and authorization process as required.