FCC ID MCQ-XB900HP
XBEE 900 HP
by Digi International Inc
Grantee Code: MCQ Product Code: XB900HP
Latest application date: 2014-04-04
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.4-927.6 MHz | Class II permissive change or modification of presently authorized equipment | 2014-04-04 |
| 902.4-927.6 MHz | Original Equipment | 2012-09-14 |
| 902.4-927.6 MHz | Original Equipment | 2012-09-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2014-04-04 | PDF 2.2 MB |
| Manual | Users Manual | 2012-09-14 | PDF 2.7 MB |
| Int | Internal Photos | 2014-04-04 | PDF 160.1 KB |
| Internal | Internal Photos | 2012-09-14 | PDF 66.5 KB |
| Ext | External Photos | 2014-04-04 | PDF 284.9 KB |
| Ext | External Photos | 2012-09-14 | PDF 489.8 KB |
| Label | ID Label/Location Info | 2014-04-04 | PDF 133.4 KB |
| Label | ID Label/Location Info | 2012-09-14 | PDF 90.1 KB |
| Setup | Test Setup Photos | 2014-04-04 | PDF 839.8 KB |
| Test Setup | Test Setup Photos | 2012-09-14 | PDF 1.5 MB |
| DSS | Test Report | 2014-04-04 | PDF 3.4 MB |
| Test Report | Test Report | 2012-09-14 | PDF 2.8 MB |
| Authorization | Cover Letter(s) | 2014-04-04 | PDF 251.1 KB |
| Confid | Cover Letter(s) | 2014-04-04 | PDF 451 KB |
| PCII Request | Cover Letter(s) | 2014-04-04 | PDF 237.7 KB |
| Authorization Letter | Cover Letter(s) | 2012-09-14 | PDF 129.1 KB |
| Confid Request | Cover Letter(s) | 2012-09-14 | PDF 477.7 KB |
| Modular Request | Cover Letter(s) | 2012-09-14 | PDF 513.8 KB |
| Agent Authorization | Cover Letter(s) | PDF 262.3 KB | |
| Dismissal Request Letter 08272012 | Cover Letter(s) | PDF 156.8 KB | |
| Modular Request Letter | Cover Letter(s) | PDF 513.8 KB | |
| Block Metadata only | Block Diagram | PDF 5.2 KB | |
| Schema Metadata only | Schematics | PDF 1.8 MB | |
| Ops Metadata only | Operational Description | PDF 73.8 KB | |
| Old Part Metadata only | Parts List/Tune Up Info | PDF 542.5 KB | |
| Replacement Part Metadata only | Parts List/Tune Up Info | PDF 2 MB |
Application Information
| Application ID | aX+gXUVKMVlPq0bKfQ/vkw== |
|---|---|
| Final Action Date | 2014-04-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010283307 |
| Model | XB900HP |
| Frequency Range | 902.4-927.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | XBEE 900 HP |
| Responsible Party | Erik Reynolds, Director of Engineering, erik.reynolds@digi.com  , 952-912-4248 |
| Technical Contact | Bill Graff, MiCOM Labs, certification@micomlabs.com  , (925)4620304 |
| Test Firm | Gordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com , 925-462-0304 |
| TCB Email | certification@micomlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| aX+gXUVKMVlPq0bKfQ/vkw== | 2014-04-04 | Class II permissive change or modification of presently authorized equipment |
| /FFeJkbKlR7ZzOyRtq+SVA== | 2012-09-14 | Original Equipment |
| Er3TFgF3W5p6HcrT3/N6oA== | 2012-09-11 | Original Equipment |
Grants
TCB Grant - Application Er3TFgF3W5p6HcrT3/N6oA==
This application does not exist.
EAS Grant - Application Er3TFgF3W5p6HcrT3/N6oA==
This application currently is not in final status.
TCB Grant - Application aX+gXUVKMVlPq0bKfQ/vkw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/04/2014 Application Dated: 04/02/2014 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XB900HP |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | XBEE 900 HP |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 902.4 - 927.6 | 0.298 |
| Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application aX+gXUVKMVlPq0bKfQ/vkw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 04/04/2014 Application Dated: 04/02/2014 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XB900HP |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | XBEE 900 HP |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 902.4 - 927.6 | 0.298 |
| Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/14/2012 Application Dated: 09/14/2012 |
| Digi International Inc |
| 11001 Bren Road E. |
| Minnetonka, MN 55343 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XB900HP |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | XBEE 900 HP |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 902.4 - 927.6 | 0.298 |
| Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application /FFeJkbKlR7ZzOyRtq+SVA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 11001 Bren Road E. Minnetonka, MN 55343 United States |
Date of Grant: 09/14/2012 Application Dated: 09/14/2012 |
| Attention: Scott McCall , Manager Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XB900HP |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | XBEE 900 HP |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 902.4 - 927.6 | 0.298 |
| Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |