FCC ID MCQ-XBPRR
XBee RR Zigbee
by Digi International Inc
Grantee Code: MCQ Product Code: XBPRR
Latest application date: 2023-10-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-10-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-03-23 |
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-12-06 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-08-23 |
| 2405-2480 MHz | Original Equipment | 2022-03-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2023-10-20 | PDF 3.6 MB |
| User Manual | Users Manual | 2023-03-23 | PDF 254.9 KB |
| User manual | Users Manual | 2022-12-06 | PDF 3.6 MB |
| User manual | Users Manual | 2022-08-23 | PDF 3.2 MB |
| User Manual | Users Manual | 2022-03-15 | PDF 3.1 MB |
| Internal Photos | Internal Photos | 2023-10-20 | PDF 329.2 KB |
| Internal Photos | Internal Photos | 2023-03-23 | PDF 100 KB |
| Internal photos | Internal Photos | 2022-12-06 | PDF 73.5 KB |
| Internal photos | Internal Photos | 2022-08-23 | PDF 59.1 KB |
| Internal Photos | Internal Photos | 2022-03-15 | PDF 745.6 KB |
| External Photos | External Photos | 2023-10-20 | PDF 329.2 KB |
| External Photos | External Photos | 2023-03-23 | PDF 80.8 KB |
| External photos | External Photos | 2022-12-06 | PDF 107.2 KB |
| External photos | External Photos | 2022-08-23 | PDF 83.4 KB |
| Antenna Photos | External Photos | 2022-03-15 | PDF 1,014.7 KB |
| External Photos | External Photos | 2022-03-15 | PDF 1 MB |
| Label and location | ID Label/Location Info | 2023-03-23 | PDF 1,013.9 KB |
| ID Label and Location Info | ID Label/Location Info | 2022-03-15 | PDF 359.7 KB |
| Test Setup | Test Setup Photos | 2023-10-20 | PDF 268.7 KB |
| Test Setup Photos | Test Setup Photos | 2023-03-23 | PDF 269.1 KB |
| Test Setup photos | Test Setup Photos | 2022-12-06 | PDF 181.9 KB |
| Test setup photos | Test Setup Photos | 2022-08-23 | PDF 212.6 KB |
| Test Setup | Test Setup Photos | 2022-03-15 | PDF 807 KB |
| BLE Test Report | Test Report | 2023-10-20 | PDF 455.4 KB |
| Zigbee Test Report | Test Report | 2023-10-20 | PDF 465.2 KB |
| RF Test Report BT | Test Report | 2023-03-23 | PDF 753.6 KB |
| RF Test Report Zigbee | Test Report | 2023-03-23 | PDF 654.7 KB |
| RF report BT | Test Report | 2022-12-06 | PDF 675.3 KB |
| RF report Zigbee | Test Report | 2022-12-06 | PDF 605.2 KB |
| RF Test report BT | Test Report | 2022-08-23 | PDF 770.5 KB |
| RF Test report ZB | Test Report | 2022-08-23 | PDF 599.1 KB |
| BLE Test Report | Test Report | 2022-03-15 | PDF 1.5 MB |
| Zigbee Test Report | Test Report | 2022-03-15 | PDF 1.2 MB |
| SDoC | Attestation Statements | 2023-10-20 | PDF 95.8 KB |
| Section 2.911(d)(7) | Attestation Statements | 2023-10-20 | PDF 99.2 KB |
| Sections 2.911(d)(5)(i) & (ii) | Attestation Statements | 2023-10-20 | PDF 160.8 KB |
| 2.911d5-i-ii Attestation | Attestation Statements | 2023-03-23 | PDF 161.9 KB |
| Agent Authorization letter | Attestation Statements | 2023-03-23 | PDF 97.7 KB |
| C2PC letter | Attestation Statements | 2023-03-23 | PDF 100.9 KB |
| SDoC for Unintentional | Attestation Statements | 2023-03-23 | PDF 48.2 KB |
| Signature Attestation | Attestation Statements | 2023-03-23 | PDF 189.7 KB |
| US Agent Attestation updated with FRN added | Attestation Statements | 2023-03-23 | PDF 100.1 KB |
| US Agent designation | Attestation Statements | 2023-03-23 | PDF 99.4 KB |
| Agent Authorization letter | Attestation Statements | 2022-12-06 | PDF 73.3 KB |
| Attestation for Unintentional | Attestation Statements | 2022-12-06 | PDF 63.3 KB |
| Agent Authorization | Attestation Statements | 2022-08-23 | PDF 71.8 KB |
| C2PC letter | Attestation Statements | 2022-08-23 | PDF 67.2 KB |
| SDoC for Unintentional portion | Attestation Statements | 2022-08-23 | PDF 61.9 KB |
| Signature Authorization | Attestation Statements | 2022-08-23 | PDF 189.7 KB |
| SDoC | Attestation Statements | 2022-03-15 | PDF 25.6 KB |
| Agent Authorization | Cover Letter(s) | 2023-10-20 | PDF 99 KB |
| C2PC Request | Cover Letter(s) | 2023-10-20 | PDF 122.4 KB |
| Confidentiality Request | Cover Letter(s) | 2023-10-20 | PDF 50.7 KB |
| Grantee Authorization | Cover Letter(s) | 2023-10-20 | PDF 193.8 KB |
| Confidentiality Request | Cover Letter(s) | 2023-03-23 | PDF 50 KB |
| Cover letter | Cover Letter(s) | 2023-03-23 | PDF 177.6 KB |
| C2PC letter | Cover Letter(s) | 2022-12-06 | PDF 67.6 KB |
| Confidentiality request | Cover Letter(s) | 2022-12-06 | PDF 67.8 KB |
| Cover Letter | Cover Letter(s) | 2022-12-06 | PDF 177.1 KB |
| Confidentiality request | Cover Letter(s) | 2022-08-23 | PDF 67.4 KB |
| Cover letter | Cover Letter(s) | 2022-08-23 | PDF 177.1 KB |
| Agent Authorization | Cover Letter(s) | 2022-03-15 | PDF 36.3 KB |
| Confidentiality Request | Cover Letter(s) | 2022-03-15 | PDF 30.1 KB |
| Cover Letter | Cover Letter(s) | 2022-03-15 | PDF 95.9 KB |
| Modular Approval Request | Cover Letter(s) | 2022-03-15 | PDF 157.2 KB |
| BLE MPE Evaluation | RF Exposure Info | 2023-10-20 | PDF 54.5 KB |
| Zigbee MPE Evaluation | RF Exposure Info | 2023-10-20 | PDF 54.5 KB |
| SAR Appendix 1 | RF Exposure Info | 2023-03-23 | PDF 2.2 MB |
| SAR Appendix 2 | RF Exposure Info | 2023-03-23 | PDF 938.1 KB |
| SAR Report | RF Exposure Info | 2023-03-23 | PDF 1.1 MB |
| BLE MPE Evaluation | RF Exposure Info | 2022-03-15 | PDF 23.1 KB |
| Zigbee MPE Evaluation | RF Exposure Info | 2022-03-15 | PDF 23.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 71.2 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 71.2 KB | |
| Block diagram Metadata only | Block Diagram | PDF 42.6 KB | |
| Antenna Data Sheet Metadata only | Schematics | PDF 446.2 KB | |
| Antenna Schematic Metadata only | Schematics | PDF 69.8 KB | |
| Schematics Metadata only | Schematics | PDF 183.8 KB | |
| Schematics Metadata only | Schematics | PDF 640.1 KB | |
| Schematics Metadata only | Schematics | PDF 657.8 KB | |
| Schematics Metadata only | Schematics | PDF 162.1 KB | |
| Schematics Metadata only | Schematics | PDF 62.4 KB | |
| Detailed Operational Description Metadata only | Operational Description | PDF 489.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 486.2 KB | |
| Operational description Metadata only | Operational Description | PDF 486.2 KB | |
| Operational description Metadata only | Operational Description | PDF 62.7 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 187.8 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 34.2 KB | |
| Parts List Change info Metadata only | Parts List/Tune Up Info | PDF 88.5 KB | |
| Parts list Metadata only | Parts List/Tune Up Info | PDF 77.8 KB | |
| Parts list Antenna details Metadata only | Parts List/Tune Up Info | PDF 549 KB | |
| Parts list Antenna details Metadata only | Parts List/Tune Up Info | PDF 227.3 KB |
Application Information
| Application ID | j+ctWG3V6zOnzYO77NtFSg== |
|---|---|
| Final Action Date | 2023-10-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010283307 |
| Model | XBPRR |
| Frequency Range | 2405-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | XBee RR Zigbee |
| Responsible Party | Erik Reynolds, Director of Engineering, erik.reynolds@digi.com  , 952-912-4248 |
| Agent | Dan Dan Dan, UltraTech Engineering Labs Inc, dan@ultratech-labs.com  , 905-829-1570 |
| Test Firm | Tri Luu, UltraTech Engineering Labs, Inc., tri@ultratech-labs.com , 905-829-1570 |
| TCB Email | vic@ultratech-labs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single modular approval. Power output listed is conducted. The output power is continuously variable from the value listed to the value documented in the filing. Power reduction is required at upper band-edge channel as documented in the filing. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive change to add a PCB chip antenna with the gain of 0 dBi. Class II Permissive change to add an antenna embedded in the PC Board substrate with a gain of 0 dBi. Class II Permissive change to integrate this module into XBee USB Adapter Pro with a new PCB trace dipole antenna of gain 0.87 dBi. The XBee USB Adapter Pro satisfies the General Public/Uncontrolled exposure 1g-average SAR limits of 1.6 W/kg for body configuration with maximum measured SAR value of 1.29 W/kg at a separation distance of 5 mm. Class II Permissive Change to add an embedded F-style antenna with gain of -0.5 dBi. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| j+ctWG3V6zOnzYO77NtFSg== | 2023-10-20 | Class II permissive change or modification of presently authorized equipment |
| e+0IqkOdYr5wJBSoxN3C/g== | 2023-03-23 | Class II permissive change or modification of presently authorized equipment |
| 2vUyRHL2/MLtHawIYELnOg== | 2022-12-06 | Class II permissive change or modification of presently authorized equipment |
| 6axxWV2GuD77mt+xZdk20Q== | 2022-08-23 | Class II permissive change or modification of presently authorized equipment |
| PBDySc0ULakcGY9NrodszQ== | 2022-03-15 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application PBDySc0ULakcGY9NrodszQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 03/15/2022 Application Dated: 03/15/2022 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XBPRR |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee RR Zigbee |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.006761 | |||
| 15C | 2404.0 - 2478.0 | 0.006776 | |||
| 15C | 2405.0 - 2480.0 | 0.086099 |
| Single modular approval. Power output listed is conducted. The output power is continuously variable from the value listed to the value documented in the filing. Power reduction is required at upper band-edge channel as documented in the filing. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application PBDySc0ULakcGY9NrodszQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 03/15/2022 Application Dated: 03/15/2022 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XBPRR |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee RR Zigbee |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.006761 | |||
| 15C | 2404.0 - 2478.0 | 0.006776 | |||
| 15C | 2405.0 - 2480.0 | 0.086099 |
| Single modular approval. Power output listed is conducted. The output power is continuously variable from the value listed to the value documented in the filing. Power reduction is required at upper band-edge channel as documented in the filing. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 10/20/2023 Application Dated: 10/20/2023 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XBPRR |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee RR Zigbee |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.006761 | |||
| 15C | 2404.0 - 2478.0 | 0.006776 | |||
| 15C | 2405.0 - 2480.0 | 0.086099 |
| Single modular approval. Power output listed is conducted. The output power is continuously variable from the value listed to the value documented in the filing. Power reduction is required at upper band-edge channel as documented in the filing. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive change to add a PCB chip antenna with the gain of 0 dBi. Class II Permissive change to add an antenna embedded in the PC Board substrate with a gain of 0 dBi. Class II Permissive change to integrate this module into XBee USB Adapter Pro with a new PCB trace dipole antenna of gain 0.87 dBi. The XBee USB Adapter Pro satisfies the General Public/Uncontrolled exposure 1g-average SAR limits of 1.6 W/kg for body configuration with maximum measured SAR value of 1.29 W/kg at a separation distance of 5 mm. Class II Permissive Change to add an embedded F-style antenna with gain of -0.5 dBi. |
EAS Grant - Application j+ctWG3V6zOnzYO77NtFSg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 10/20/2023 Application Dated: 10/20/2023 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XBPRR |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee RR Zigbee |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.006761 | |||
| 15C | 2404.0 - 2478.0 | 0.006776 | |||
| 15C | 2405.0 - 2480.0 | 0.086099 |
| Single modular approval. Power output listed is conducted. The output power is continuously variable from the value listed to the value documented in the filing. Power reduction is required at upper band-edge channel as documented in the filing. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive change to add a PCB chip antenna with the gain of 0 dBi. Class II Permissive change to add an antenna embedded in the PC Board substrate with a gain of 0 dBi. Class II Permissive change to integrate this module into XBee USB Adapter Pro with a new PCB trace dipole antenna of gain 0.87 dBi. The XBee USB Adapter Pro satisfies the General Public/Uncontrolled exposure 1g-average SAR limits of 1.6 W/kg for body configuration with maximum measured SAR value of 1.29 W/kg at a separation distance of 5 mm. Class II Permissive Change to add an embedded F-style antenna with gain of -0.5 dBi. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 03/23/2023 Application Dated: 03/22/2023 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XBPRR |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee RR Zigbee |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.006761 | |||
| 15C | 2404.0 - 2478.0 | 0.006776 | |||
| 15C | 2405.0 - 2480.0 | 0.086099 |
| Single modular approval. Power output listed is conducted. The output power is continuously variable from the value listed to the value documented in the filing. Power reduction is required at upper band-edge channel as documented in the filing. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive change to add a PCB chip antenna with the gain of 0 dBi. Class II Permissive change to add an antenna embedded in the PC Board substrate with a gain of 0 dBi. Class II Permissive change to integrate this module into XBee USB Adapter Pro with a new PCB trace dipole antenna of gain 0.87 dBi. The XBee USB Adapter Pro satisfies the General Public/Uncontrolled exposure 1g-average SAR limits of 1.6 W/kg for body configuration with maximum measured SAR value of 1.29 W/kg at a separation distance of 5 mm. |
EAS Grant - Application e+0IqkOdYr5wJBSoxN3C/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 03/23/2023 Application Dated: 03/22/2023 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XBPRR |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee RR Zigbee |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.006761 | |||
| 15C | 2404.0 - 2478.0 | 0.006776 | |||
| 15C | 2405.0 - 2480.0 | 0.086099 |
| Single modular approval. Power output listed is conducted. The output power is continuously variable from the value listed to the value documented in the filing. Power reduction is required at upper band-edge channel as documented in the filing. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive change to add a PCB chip antenna with the gain of 0 dBi. Class II Permissive change to add an antenna embedded in the PC Board substrate with a gain of 0 dBi. Class II Permissive change to integrate this module into XBee USB Adapter Pro with a new PCB trace dipole antenna of gain 0.87 dBi. The XBee USB Adapter Pro satisfies the General Public/Uncontrolled exposure 1g-average SAR limits of 1.6 W/kg for body configuration with maximum measured SAR value of 1.29 W/kg at a separation distance of 5 mm. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 08/23/2022 Application Dated: 08/23/2022 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XBPRR |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee RR Zigbee |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.006761 | |||
| 15C | 2404.0 - 2478.0 | 0.006776 | |||
| 15C | 2405.0 - 2480.0 | 0.086099 |
| Single modular approval. Power output listed is conducted. The output power is continuously variable from the value listed to the value documented in the filing. Power reduction is required at upper band-edge channel as documented in the filing. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive change to add a PCB chip antenna with the gain of 0 dBi. |
EAS Grant - Application 6axxWV2GuD77mt+xZdk20Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 08/23/2022 Application Dated: 08/23/2022 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XBPRR |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee RR Zigbee |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.006761 | |||
| 15C | 2404.0 - 2478.0 | 0.006776 | |||
| 15C | 2405.0 - 2480.0 | 0.086099 |
| Single modular approval. Power output listed is conducted. The output power is continuously variable from the value listed to the value documented in the filing. Power reduction is required at upper band-edge channel as documented in the filing. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive change to add a PCB chip antenna with the gain of 0 dBi. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 12/06/2022 Application Dated: 12/05/2022 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XBPRR |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee RR Zigbee |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.006761 | |||
| 15C | 2404.0 - 2478.0 | 0.006776 | |||
| 15C | 2405.0 - 2480.0 | 0.086099 |
| Single modular approval. Power output listed is conducted. The output power is continuously variable from the value listed to the value documented in the filing. Power reduction is required at upper band-edge channel as documented in the filing. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive change to add a PCB chip antenna with the gain of 0 dBi. Class II Permissive change to add an antenna embedded in the PC Board substrate with a gain of 0 dBi. |
EAS Grant - Application 2vUyRHL2/MLtHawIYELnOg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 12/06/2022 Application Dated: 12/05/2022 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-XBPRR |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | XBee RR Zigbee |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.006761 | |||
| 15C | 2404.0 - 2478.0 | 0.006776 | |||
| 15C | 2405.0 - 2480.0 | 0.086099 |
| Single modular approval. Power output listed is conducted. The output power is continuously variable from the value listed to the value documented in the filing. Power reduction is required at upper band-edge channel as documented in the filing. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive change to add a PCB chip antenna with the gain of 0 dBi. Class II Permissive change to add an antenna embedded in the PC Board substrate with a gain of 0 dBi. |
| Mail To: |