FCC ID MCQ-CCIMX6P
Embedded ARM Module
by Digi International Inc
Grantee Code: MCQ Product Code: CCIMX6P
Latest application date: 2022-08-10
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-08-10 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-08-10 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2022-08-10 |
| 2402-2480 MHz | Original Equipment | 2018-05-15 |
| 2412-2462 MHz | Original Equipment | 2018-05-15 |
| 5180-5240 MHz | Original Equipment | 2018-05-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2022-08-10 | PDF 1.2 MB |
| Use Guide | Users Manual | 2018-11-11 | PDF 2.8 MB |
| Internal Photographs | Internal Photos | 2018-11-11 | PDF 1.2 MB |
| External photos | External Photos | 2022-08-10 | PDF 718.1 KB |
| External Photographs | External Photos | 2018-11-11 | PDF 1.3 MB |
| External Photos | External Photos | 2018-11-11 | PDF 1.3 MB |
| Label Design | ID Label/Location Info | 2018-05-15 | PDF 445.2 KB |
| Label design and location | ID Label/Location Info | 2018-05-15 | PDF 261.5 KB |
| Test setup photos | Test Setup Photos | 2022-08-10 | PDF 1.2 MB |
| Test Set UP Photographs | Test Setup Photos | 2018-11-11 | PDF 488 KB |
| Test report | Test Report | 2022-08-10 | PDF 3.4 MB |
| Test report | Test Report | 2022-08-10 | PDF 2.5 MB |
| Test report BTLE | Test Report | 2022-08-10 | PDF 2.3 MB |
| Test report WLAN | Test Report | 2022-08-10 | PDF 2.5 MB |
| RFUSP01V00 A Report | Test Report | 2018-05-15 | PDF 5 MB |
| Report DEKRA WLAN 2.1 | Test Report | 2018-05-15 | PDF 3.1 MB |
| Report-DEKRA BT 4 | Test Report | 2018-05-15 | PDF 1.6 MB |
| Test Report | Test Report | 2018-05-15 | PDF 5.5 MB |
| Test Report 2 | Test Report | 2018-05-15 | PDF 1.1 MB |
| rfusp01v00 a report | Test Report | 2018-05-15 | PDF 5 MB |
| C2PC | Cover Letter(s) | 2022-08-10 | PDF 83.2 KB |
| C2PC letter | Cover Letter(s) | 2022-08-10 | PDF 83.2 KB |
| Agent Letter FCC Signed | Cover Letter(s) | 2018-05-15 | PDF 513.4 KB |
| Declaration Software Security | Cover Letter(s) | 2018-05-15 | PDF 504.6 KB |
| FCC Confidentiality Request | Cover Letter(s) | 2018-05-15 | PDF 415.2 KB |
| FCC Modular approval letter | Cover Letter(s) | 2018-05-15 | PDF 128.3 KB |
| RF Exposure | RF Exposure Info | 2022-08-10 | PDF 279.8 KB |
| RF Exposure info | RF Exposure Info | 2022-08-10 | PDF 279.8 KB |
| RF Exposure | RF Exposure Info | 2018-05-15 | PDF 185.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 445.4 KB | |
| Block Diagrams Metadata only | Block Diagram | PDF 445.4 KB | |
| Schematics Metadata only | Schematics | PDF 2.9 MB | |
| Antenna Information Metadata only | Operational Description | PDF 284.5 KB | |
| Operational Description Metadata only | Operational Description | PDF 2.2 MB |
Application Information
| Application ID | iLOj4F4JHTJfwu4p93cL7A== |
|---|---|
| Final Action Date | 2022-08-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010283307 |
| Model | CCIMX6P |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Embedded ARM Module |
| Responsible Party | Erik Reynolds, Director of Engineering, erik.reynolds@digi.com  , 952-912-4248 |
| Test Firm | Gerald Schmidt, CTC advanced GmbH, mail@ctcadvanced.com  , 49-681-598-0 |
| TCB Email | tcb@ctcadvanced.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC due to adding the antennas Ethertronics 1001932PT and YAGEO ANTX200P001B24003 to the filing. Output power is conducted.Single Modular Approval. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 end products terms and concepts. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iLOj4F4JHTJfwu4p93cL7A== | 2022-08-10 | Class II permissive change or modification of presently authorized equipment |
| V5NfdUm4lpqIAlCqeT8v6A== | 2022-08-10 | Class II permissive change or modification of presently authorized equipment |
| Rua35IGrnZ2EYoUw/5ZNAg== | 2022-08-10 | Class II permissive change or modification of presently authorized equipment |
| Wgpbf3jDP5KdvP9USZXtVw== | 2018-05-15 | Original Equipment |
| TyEGtRYTR9A4bzTL/damvQ== | 2018-05-15 | Original Equipment |
| JjUL+Ft8npePJRIE7ItpYQ== | 2018-05-15 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Wgpbf3jDP5KdvP9USZXtVw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DEKRA Testing and Certification, S.A.U. Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6 Campanillas - Malaga, 29590 Spain |
Date of Grant: 05/15/2018 Application Dated: 05/15/2018 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CCIMX6P |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00169 |
| Ouput power is conducted. Single Modular Approval. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 end products terms and concepts. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Wgpbf3jDP5KdvP9USZXtVw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 05/15/2018 Application Dated: 05/15/2018 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CCIMX6P |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00169 |
| Ouput power is conducted. Single Modular Approval. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 end products terms and concepts. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 08/10/2022 Application Dated: 08/10/2022 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CCIMX6P |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00169 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.06668 |
| C2PC due to adding the antennas Ethertronics 1001932PT and YAGEO ANTX200P001B24003 to the filing. Output power is conducted. Single Modular Approval. This device has 20MHz and 40MHz BW modes. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 end products terms and concepts. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application V5NfdUm4lpqIAlCqeT8v6A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 08/10/2022 Application Dated: 08/10/2022 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CCIMX6P |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00169 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.06668 |
| C2PC due to adding the antennas Ethertronics 1001932PT and YAGEO ANTX200P001B24003 to the filing. Output power is conducted. Single Modular Approval. This device has 20MHz and 40MHz BW modes. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 end products terms and concepts. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DEKRA Testing and Certification, S.A.U. Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6 Campanillas - Malaga, 29590 Spain |
Date of Grant: 05/15/2018 Application Dated: 05/15/2018 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CCIMX6P |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06668 |
| Ouput power is conducted.Single Modular Approval. This device has 20, and 40MHz BW modes. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 end products terms and concepts. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application TyEGtRYTR9A4bzTL/damvQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 05/15/2018 Application Dated: 05/15/2018 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CCIMX6P |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06668 |
| Ouput power is conducted.Single Modular Approval. This device has 20, and 40MHz BW modes. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 end products terms and concepts. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 08/10/2022 Application Dated: 08/10/2022 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CCIMX6P |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5240.0 | 0.02128 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.02094 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.02118 | ||
| CC ND | 15E | 5745.0 - 5825.0 | 0.02109 |
| C2PC due to adding the antennas Ethertronics 1001932PT and YAGEO ANTX200P001B24003 to the filing. Output power is conducted. Single Modular Approval. This device has 20, 40 and 80 MHz BW modes. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 end products terms and concepts. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Rua35IGrnZ2EYoUw/5ZNAg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 08/10/2022 Application Dated: 08/10/2022 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CCIMX6P |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5240.0 | 0.02128 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.02094 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.02118 | ||
| CC ND | 15E | 5745.0 - 5825.0 | 0.02109 |
| C2PC due to adding the antennas Ethertronics 1001932PT and YAGEO ANTX200P001B24003 to the filing. Output power is conducted. Single Modular Approval. This device has 20, 40 and 80 MHz BW modes. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 end products terms and concepts. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DEKRA Testing and Certification, S.A.U. Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6 Campanillas - Malaga, 29590 Spain |
Date of Grant: 05/15/2018 Application Dated: 05/15/2018 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CCIMX6P |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5240.0 | 0.02128 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.02094 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.02118 | ||
| CC ND | 15E | 5745.0 - 5825.0 | 0.02109 |
| Ouput power is conducted. Single Modular Approval. This device has 20, 40 and 80 MHz BW modes. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 end products terms and concepts. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application JjUL+Ft8npePJRIE7ItpYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 05/15/2018 Application Dated: 05/15/2018 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CCIMX6P |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5240.0 | 0.02128 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.02094 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.02118 | ||
| CC ND | 15E | 5745.0 - 5825.0 | 0.02109 |
| Ouput power is conducted. Single Modular Approval. This device has 20, 40 and 80 MHz BW modes. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 end products terms and concepts. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 08/10/2022 Application Dated: 08/10/2022 |
| Digi International Inc |
| 9350 Excelsior Blvd. |
| Suite 700 |
| Hopkins, MN 55343 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CCIMX6P |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00881 |
| C2PC due to adding the antennas Ethertronics 1001932PT and YAGEO ANTX200P001B24003 to the filing. Output power is conducted.Single Modular Approval. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 end products terms and concepts. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application iLOj4F4JHTJfwu4p93cL7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digi International Inc 9350 Excelsior Blvd. Suite 700 Hopkins, MN 55343 United States |
Date of Grant: 08/10/2022 Application Dated: 08/10/2022 |
| Attention: Erik Reynolds , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MCQ-CCIMX6P |
| Name of Grantee: | Digi International Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Embedded ARM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00881 |
| C2PC due to adding the antennas Ethertronics 1001932PT and YAGEO ANTX200P001B24003 to the filing. Output power is conducted.Single Modular Approval. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 end products terms and concepts. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |