FCC ID MG3-59007
UE878 LGA Module
by Universal Electronics Inc
Grantee Code: MG3 Product Code: 59007
Latest application date: 2020-05-19
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-05-19 |
| 2402-2480 MHz | Original Equipment | 2017-12-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2020-05-19 | PDF 4.9 MB |
| Users Manual | Users Manual | 2017-12-13 | PDF 88.4 KB |
| Internal Photos | Internal Photos | 2020-05-19 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2017-12-13 | PDF 503.4 KB |
| External Photos | External Photos | 2020-05-19 | PDF 434 KB |
| External Photos | External Photos | 2017-12-13 | PDF 488.2 KB |
| ID Label/Location Info | ID Label/Location Info | 2020-05-19 | PDF 54.9 KB |
| ID Label/Location Info | ID Label/Location Info | 2017-12-13 | PDF 10.7 KB |
| Test Setup Photos | Test Setup Photos | 2017-12-13 | PDF 1.2 MB |
| Test Report | Test Report | 2020-05-19 | PDF 479.4 KB |
| Test Report | Test Report | 2017-12-13 | PDF 1.3 MB |
| Class II Permissive Change Letter | Cover Letter(s) | 2020-05-19 | PDF 145.5 KB |
| Declaration of authorization | Cover Letter(s) | 2020-05-19 | PDF 65.7 KB |
| Confidentiality | Cover Letter(s) | 2017-12-13 | PDF 34.5 KB |
| Declaration of authorization | Cover Letter(s) | 2017-12-13 | PDF 43.4 KB |
| Modular Approval Request | Cover Letter(s) | 2017-12-13 | PDF 123.6 KB |
| MPE | RF Exposure Info | 2020-05-19 | PDF 274.6 KB |
| MPE | RF Exposure Info | 2017-12-13 | PDF 170.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 19.6 KB | |
| Schematics Metadata only | Schematics | PDF 69.8 KB | |
| Operational Description Metadata only | Operational Description | PDF 120.9 KB |
Application Information
| Application ID | qtgd6+D6o4TqJfYwJIGLCA== |
|---|---|
| Final Action Date | 2020-05-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007413982 |
| Model | 59007 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | UE878 LGA Module |
| Responsible Party | Jesse Mendez, Staff Engineer Electrical, jmendez@uei.com  , 714-918-9500 |
| Technical Contact | Jim Chang, SGS Taiwan Ltd., jim.chang@sgs.com  , 886222993279 |
| Non-Technical Contact | Jim Chang, SGS Taiwan Ltd., jim.chang@sgs.com , 886222993279 |
| Test Firm | Ryan WANG, SGS Taiwan Ltd. Electronics & Communication Lab, ryan-ec.wang@sgs.com , +886-2-2299-3279 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC: 1-The subject approved module is being used in different host. 2. MPE report is provided to demonstrate RF exposure Compliance. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| qtgd6+D6o4TqJfYwJIGLCA== | 2020-05-19 | Class II permissive change or modification of presently authorized equipment |
| fYnihCeugvSUnSFxrjsg5g== | 2017-12-13 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0052000 | 15C |
Grants
TCB Grant - Application qtgd6+D6o4TqJfYwJIGLCA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/19/2020 Application Dated: 05/13/2020 |
| Universal Electronics Inc |
| 201 East Sandpointe Ave, 7th Floor |
| Santa Ana, CA 92707 |
| Attention: Jesse Mendez , Staff Engineer Electrical |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MG3-59007 |
| Name of Grantee: | Universal Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | UE878 LGA Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0052 |
| C2PC: 1-The subject approved module is being used in different host. 2. MPE report is provided to demonstrate RF exposure Compliance. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application qtgd6+D6o4TqJfYwJIGLCA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Universal Electronics Inc 201 East Sandpointe Ave, 7th Floor Santa Ana, CA 92707 United States |
Date of Grant: 05/19/2020 Application Dated: 05/13/2020 |
| Attention: Jesse Mendez , Staff Engineer Electrical |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MG3-59007 |
| Name of Grantee: | Universal Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | UE878 LGA Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0052 |
| C2PC: 1-The subject approved module is being used in different host. 2. MPE report is provided to demonstrate RF exposure Compliance. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 12/13/2017 Application Dated: 12/07/2017 |
| Universal Electronics Inc |
| 201 East Sandpointe Ave, 7th Floor |
| Santa Ana, CA 92707 |
| Attention: Jesse Mendez , Staff Engineer Electrical |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MG3-59007 |
| Name of Grantee: | Universal Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | UE878 LGA Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0052 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application fYnihCeugvSUnSFxrjsg5g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Universal Electronics Inc 201 East Sandpointe Ave, 7th Floor Santa Ana, CA 92707 United States |
Date of Grant: 12/13/2017 Application Dated: 12/07/2017 |
| Attention: Jesse Mendez , Staff Engineer Electrical |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MG3-59007 |
| Name of Grantee: | Universal Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | UE878 LGA Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0052 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |