FCC ID MH8C
Broadcom Bluetooth Module
by Pelagic Pressure Systems
Grantee Code: MH8 Product Code: C
Latest application date: 2016-12-20
FCC ID Device Details
| FCC ID | MH8C |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | MH8 |
| Product Code | C |
| Applicant Business | Pelagic Pressure Systems 🇺🇸 |
| Related Domains |  pelagicnet.com |
| Equipment Class | Broadcom Bluetooth Module |
| Test Firm | Universal Compliance Labs dba EMCE Engineering |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-12-20 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1078 Grant Date: 11/06/2013 | 2016-12-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2016-12-20 | PDF 1 MB |
| External Photos | External Photos | 2016-12-20 | PDF 226 KB |
| ID Label and Location Info | ID Label/Location Info | 2016-12-20 | PDF 375 KB |
| Test Setup Photos | Test Setup Photos | 2016-12-20 | PDF 644 KB |
| RF Test Report | Test Report | 2016-12-20 | PDF 567.3 KB |
| FCC C2PC Request Letter | Cover Letter(s) | 2016-12-20 | PDF 148.1 KB |
| FCC ID Change letter from new applicant | Cover Letter(s) | 2016-12-20 | PDF 103.4 KB |
| FCC ID Change letter from old applicant | Cover Letter(s) | 2016-12-20 | PDF 75.6 KB |
Application Information
| Application ID | 84CEI9vvu5Aopje9OUnFYQ== |
|---|---|
| Final Action Date | 2016-12-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026078592 |
| Model | C |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Broadcom Bluetooth Module |
| Responsible Party | Mike Hollis, President, mhollis@pelagicnet.com , 5105693100 |
| Test Firm | Bob Cole, Universal Compliance Labs dba EMCE Engineering, bob@universalcompliance.com  , 510-490-4307 |
| TCB Email | tcb@hctamerica.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change to add new hosts as documented in this filing. Output power listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated spurious emissions due to the lack of shielding on the module. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 84CEI9vvu5Aopje9OUnFYQ== | 2016-12-20 | Class II permissive change or modification of presently authorized equipment |
| 5PbGJiL1bAsCuxgDbdKgvg== | 2016-12-20 | Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1078 Grant Date: 11/06/2013 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0018000 | 15C |
Grants
TCB Grant - Application 84CEI9vvu5Aopje9OUnFYQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 12/20/2016 Application Dated: 12/20/2016 |
| Pelagic Pressure Systems |
| 2002 Davis Street |
| San Leandro, CA 94577 |
| Attention: Mike Hollis , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MH8C |
| Name of Grantee: | Pelagic Pressure Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Broadcom Bluetooth Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0018 |
| Class II permissive change to add new hosts as documented in this filing. Output power listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated spurious emissions due to the lack of shielding on the module. |
EAS Grant - Application 84CEI9vvu5Aopje9OUnFYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Pelagic Pressure Systems 2002 Davis Street San Leandro, CA 94577 United States |
Date of Grant: 12/20/2016 Application Dated: 12/20/2016 |
| Attention: Mike Hollis , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MH8C |
| Name of Grantee: | Pelagic Pressure Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Broadcom Bluetooth Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0018 |
| Class II permissive change to add new hosts as documented in this filing. Output power listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated spurious emissions due to the lack of shielding on the module. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 12/20/2016 Application Dated: 12/20/2016 |
| Pelagic Pressure Systems |
| 2002 Davis Street |
| San Leandro, CA 94577 |
| Attention: Mike Hollis , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MH8C |
| Name of Grantee: | Pelagic Pressure Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Broadcom Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0018 |
| Output power listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated spurious emissions due to the lack of shielding on the module. |
EAS Grant - Application 5PbGJiL1bAsCuxgDbdKgvg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Pelagic Pressure Systems 2002 Davis Street San Leandro, CA 94577 United States |
Date of Grant: 12/20/2016 Application Dated: 12/20/2016 |
| Attention: Mike Hollis , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MH8C |
| Name of Grantee: | Pelagic Pressure Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Broadcom Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0018 |
| Output power listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated spurious emissions due to the lack of shielding on the module. |
| Mail To: |