FCC ID MHI-CONAPPWM
BT, BLE and 802.11abgn Radio Module
by Card Access Inc
Grantee Code: MHI Product Code: CONAPPWM
Latest application date: 2016-09-06
FCC ID Device Details
| FCC ID | MHI-CONAPPWM |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | MHI |
| Product Code | CONAPPWM |
| Applicant Business | Card Access Inc 🇺🇸 |
| Related Domains |  cardaccess-inc.com |
| Equipment Class | BT, BLE and 802.11abgn Radio Module |
| Test Firm | UL Verification Services Inc. (formerly UL CCS) |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2016-09-06 |
| 2402-2480 MHz | Original Equipment | 2016-09-06 |
| 5180-5240 MHz | Original Equipment | 2016-09-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| CONAPPWM_Integrator_Guide | Users Manual | 2017-01-01 | PDF 577.8 KB |
| Connected_Appliances_UG | Users Manual | 2017-01-01 | PDF 552.8 KB |
| Internal Photos | Internal Photos | 2017-01-01 | PDF 3.3 MB |
| External Photo | External Photos | 2017-01-01 | PDF 1.8 MB |
| External Photos | External Photos | 2017-01-01 | PDF 1.8 MB |
| Proposed_Label_and_Location | ID Label/Location Info | 2016-09-06 | PDF 486.3 KB |
| 16U22930-E1V2 FCCIC Setup Photos BT | Test Setup Photos | 2017-01-01 | PDF 730.4 KB |
| 16U22930-E2V2 FCCIC Setup Photos BLE | Test Setup Photos | 2017-01-01 | PDF 730.5 KB |
| 16U22930-E3V2 FCCIC Setup Photos DTS | Test Setup Photos | 2017-01-01 | PDF 508.8 KB |
| 16U22930-E4V2 FCCIC Setup Photos UNII WLAN | Test Setup Photos | 2017-01-01 | PDF 720.5 KB |
| 16U22930-E5V1 FCCIC SETUP PHOTOS DFS UNII WLAN | Test Setup Photos | 2017-01-01 | PDF 95 KB |
| 16U22930-E1V2 FCCIC Report BT | Test Report | 2016-09-06 | PDF 2.3 MB |
| 16U22930-E2V2 FCCIC Report BLE | Test Report | 2016-09-06 | PDF 2.1 MB |
| 16U22930-E3V2 FCCIC Report DTS | Test Report | 2016-09-06 | PDF 4.2 MB |
| 16U22930-E4V2 FCCIC Report UNII WLAN_1 of 2 | Test Report | 2016-09-06 | PDF 4.7 MB |
| 16U22930-E4V2 FCCIC Report UNII WLAN_2 of2 | Test Report | 2016-09-06 | PDF 5.8 MB |
| 16U22930-E5V1 FCCIC REPORT DFS UNII WLAN | Test Report | 2016-09-06 | PDF 976.4 KB |
| 16U22930-E7V3 FCCIC Report MPE | Test Report | 2016-09-06 | PDF 301.1 KB |
| FCC_Agent_Auth_Letter(UL) | Cover Letter(s) | 2016-09-06 | PDF 126.1 KB |
| FCC_Request_for_Confidentiality | Cover Letter(s) | 2016-09-06 | PDF 320.4 KB |
| Request for Modular Approval per section 15.212 requirements | Cover Letter(s) | 2016-09-06 | PDF 291.7 KB |
| 16U22930-E7V3 FCCIC Report MPE | RF Exposure Info | 2016-09-06 | PDF 301.1 KB |
| Puma Block Diagram Metadata only | Block Diagram | PDF 34.9 KB | |
| SCH-LYNX-220_Schematics Metadata only | Schematics | PDF 1.8 MB | |
| CONAPPWM_Integrator_Guide Metadata only | Operational Description | PDF 542.1 KB | |
| KDB 594280 D02 v01r03 U-NII Device SW Security Statement_Puma Metadata only | Operational Description | PDF 326.9 KB | |
| Puma_Antenna_Spec_V100 Metadata only | Operational Description | PDF 337.1 KB | |
| Theory_of_Operation Metadata only | Operational Description | PDF 381.3 KB | |
| WLAN Channel Plan and Technical Description Metadata only | Operational Description | PDF 191.8 KB |
Application Information
| Application ID | hjCgO5HVhqIbT9TiODDAVQ== |
|---|---|
| Final Action Date | 2016-09-06 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0015562044 |
| Model | CONAPPWM |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | BT, BLE and 802.11abgn Radio Module |
| Responsible Party | James A Stout, Vice President Engineering, jstout@cardaccess-inc.com , 801-748-4900 |
| Test Firm | Jay Kogoma, UL Verification Services Inc. (formerly UL CCS), jay.kogoma@ul.com  , 510-319-4135 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/01/2017 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power is conducted. This module may be installed by the OEM or an OEM integrator and is also approved to be marketed as being end-user plug-and-play replaceable into household appliances and similar hosts via the RS485 interface. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must coordinate with OEM integrators to determine applicable host configurations, including those configurations designed for end-user installation, to ensure RF exposure compliance, including simultaneous transmission SAR requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| hjCgO5HVhqIbT9TiODDAVQ== | 2016-09-06 | Original Equipment |
| ciqPTMA1qLqWTjsTjOTQmA== | 2016-09-06 | Original Equipment |
| +voCeyphPQNYsU3iqua6CA== | 2016-09-06 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application hjCgO5HVhqIbT9TiODDAVQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/06/2016 Application Dated: 09/05/2016 |
| Card Access Inc |
| 147 W Election Rd |
| Suite 200 |
| Draper, UT 84020 |
| Attention: James Stout , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MHI-CONAPPWM |
| Name of Grantee: | Card Access Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BT, BLE and 802.11abgn Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0037 |
| Output power is conducted. This module may be installed by the OEM or an OEM integrator and is also approved to be marketed as being end-user plug-and-play replaceable into household appliances and similar hosts via the RS485 interface. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must coordinate with OEM integrators to determine applicable host configurations, including those configurations designed for end-user installation, to ensure RF exposure compliance, including simultaneous transmission SAR requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application hjCgO5HVhqIbT9TiODDAVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Card Access Inc 147 W Election Rd Suite 200 Draper, UT 84020 United States |
Date of Grant: 09/06/2016 Application Dated: 09/05/2016 |
| Attention: James Stout , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MHI-CONAPPWM |
| Name of Grantee: | Card Access Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BT, BLE and 802.11abgn Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0037 |
| Output power is conducted. This module may be installed by the OEM or an OEM integrator and is also approved to be marketed as being end-user plug-and-play replaceable into household appliances and similar hosts via the RS485 interface. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must coordinate with OEM integrators to determine applicable host configurations, including those configurations designed for end-user installation, to ensure RF exposure compliance, including simultaneous transmission SAR requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/06/2016 Application Dated: 09/05/2016 |
| Card Access Inc |
| 147 W Election Rd |
| Suite 200 |
| Draper, UT 84020 |
| Attention: James Stout , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MHI-CONAPPWM |
| Name of Grantee: | Card Access Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | BT, BLE and 802.11abgn Radio Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0015 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0516 |
| Output power is conducted. This device supports channel bandwidths of 20MHz and 40MHz. This module may be installed by the OEM or an OEM integrator and is also approved to be marketed as being end-user plug-and-play replaceable into household appliances and similar hosts via the RS485 interface. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must coordinate with OEM integrators to determine applicable host configurations, including those configurations designed for end-user installation, to ensure RF exposure compliance, including simultaneous transmission SAR requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ciqPTMA1qLqWTjsTjOTQmA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Card Access Inc 147 W Election Rd Suite 200 Draper, UT 84020 United States |
Date of Grant: 09/06/2016 Application Dated: 09/05/2016 |
| Attention: James Stout , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MHI-CONAPPWM |
| Name of Grantee: | Card Access Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | BT, BLE and 802.11abgn Radio Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0015 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0516 |
| Output power is conducted. This device supports channel bandwidths of 20MHz and 40MHz. This module may be installed by the OEM or an OEM integrator and is also approved to be marketed as being end-user plug-and-play replaceable into household appliances and similar hosts via the RS485 interface. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must coordinate with OEM integrators to determine applicable host configurations, including those configurations designed for end-user installation, to ensure RF exposure compliance, including simultaneous transmission SAR requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/06/2016 Application Dated: 09/05/2016 |
| Card Access Inc |
| 147 W Election Rd |
| Suite 200 |
| Draper, UT 84020 |
| Attention: James Stout , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MHI-CONAPPWM |
| Name of Grantee: | Card Access Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | BT, BLE and 802.11abgn Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.1016 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.1023 | ||
| 38 CC | 15E | 5500.0 - 5700.0 | 0.1012 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.1047 |
| Output power is conducted. This device supports 20 and 40 MHz channel bandwidths. This module may be installed by the OEM or an OEM integrator and is also approved to be marketed as being end-user plug-and-play replaceable into household appliances and similar hosts via the RS485 interface. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must coordinate with OEM integrators to determine applicable host configurations, including those configurations designed for end-user installation, to ensure RF exposure compliance, including simultaneous transmission SAR requirements. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +voCeyphPQNYsU3iqua6CA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Card Access Inc 147 W Election Rd Suite 200 Draper, UT 84020 United States |
Date of Grant: 09/06/2016 Application Dated: 09/05/2016 |
| Attention: James Stout , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MHI-CONAPPWM |
| Name of Grantee: | Card Access Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | BT, BLE and 802.11abgn Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.1016 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.1023 | ||
| 38 CC | 15E | 5500.0 - 5700.0 | 0.1012 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.1047 |
| Output power is conducted. This device supports 20 and 40 MHz channel bandwidths. This module may be installed by the OEM or an OEM integrator and is also approved to be marketed as being end-user plug-and-play replaceable into household appliances and similar hosts via the RS485 interface. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must coordinate with OEM integrators to determine applicable host configurations, including those configurations designed for end-user installation, to ensure RF exposure compliance, including simultaneous transmission SAR requirements. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |