FCC ID MHI-CONAPPWM2
Wireless Module for Connected Appliances
by Card Access Inc
Grantee Code: MHI Product Code: CONAPPWM2
Latest application date: 2021-06-09
FCC ID Device Details
| FCC ID | MHI-CONAPPWM2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | MHI |
| Product Code | CONAPPWM2 |
| Applicant Business | Card Access Inc 🇺🇸 |
| Related Domains |  cardaccess-inc.com |
| Equipment Class | Wireless Module for Connected Appliances |
| Test Firm | VPI Laboratories, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2021-06-09 |
| 2402-2480 MHz | Original Equipment | 2021-06-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Integrator Guide | Users Manual | 2021-06-09 | PDF 830.2 KB |
| Internal Photo | Internal Photos | 2021-06-09 | PDF 448.9 KB |
| External Photo | External Photos | 2021-06-09 | PDF 556.8 KB |
| Label Location | ID Label/Location Info | 2021-06-09 | PDF 32 KB |
| Label Sample | ID Label/Location Info | 2021-06-09 | PDF 118.3 KB |
| Test Setup Photos | Test Setup Photos | 2021-06-09 | PDF 694.4 KB |
| Test Report BLE | Test Report | 2021-06-09 | PDF 2.1 MB |
| Test Report DFS | Test Report | 2021-06-09 | PDF 467.5 KB |
| Test Report SubC WiFi | Test Report | 2021-06-09 | PDF 2.8 MB |
| TestReport_SubE_UNII-1 | Test Report | 2021-06-09 | PDF 2.3 MB |
| TestReport_SubE_UNII-2 | Test Report | 2021-06-09 | PDF 2.4 MB |
| TestReport_SubE_UNII-3 | Test Report | 2021-06-09 | PDF 2.3 MB |
| Agent Letter | Cover Letter(s) | 2021-06-09 | PDF 105.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2021-06-09 | PDF 79.5 KB |
| Modular Request | Cover Letter(s) | 2021-06-09 | PDF 193.9 KB |
| MPE | RF Exposure Info | 2021-06-09 | PDF 94.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 101.3 KB | |
| Schematics Metadata only | Schematics | PDF 1.5 MB | |
| Operational Description Metadata only | Operational Description | PDF 57.6 KB | |
| Software Security Metadata only | SDR Software/Security Inf | PDF 199.4 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 107.9 KB |
Application Information
| Application ID | erJD79fWRuREy2tdtzb5aQ== |
|---|---|
| Final Action Date | 2021-06-09 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0015562044 |
| Model | CONAPPWM2 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless Module for Connected Appliances |
| Responsible Party | James A Stout, Vice President Engineering, jstout@cardaccess-inc.com , 801-748-4900 |
| Test Firm | Jason Stewart, VPI Laboratories, Inc., jasons@vpimfg.com  , 801-495-2310 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| erJD79fWRuREy2tdtzb5aQ== | 2021-06-09 | Original Equipment |
| PuGWH2N0ZsQ3cRFn8Ep3nQ== | 2021-06-09 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application PuGWH2N0ZsQ3cRFn8Ep3nQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/09/2021 Application Dated: 06/09/2021 |
| Card Access Inc |
| 147 W Election Rd |
| Suite 200 |
| Draper, UT 84020 |
| Attention: James Stout , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MHI-CONAPPWM2 |
| Name of Grantee: | Card Access Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module for Connected Appliances |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00114 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1096 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application PuGWH2N0ZsQ3cRFn8Ep3nQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Card Access Inc 147 W Election Rd Suite 200 Draper, UT 84020 United States |
Date of Grant: 06/09/2021 Application Dated: 06/09/2021 |
| Attention: James Stout , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MHI-CONAPPWM2 |
| Name of Grantee: | Card Access Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module for Connected Appliances |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00114 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1096 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/09/2021 Application Dated: 06/09/2021 |
| Card Access Inc |
| 147 W Election Rd |
| Suite 200 |
| Draper, UT 84020 |
| Attention: James Stout , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MHI-CONAPPWM2 |
| Name of Grantee: | Card Access Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module for Connected Appliances |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0661 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0631 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0589 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.055 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application erJD79fWRuREy2tdtzb5aQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Card Access Inc 147 W Election Rd Suite 200 Draper, UT 84020 United States |
Date of Grant: 06/09/2021 Application Dated: 06/09/2021 |
| Attention: James Stout , Vice President Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MHI-CONAPPWM2 |
| Name of Grantee: | Card Access Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module for Connected Appliances |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0661 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0631 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0589 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.055 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |