FCC ID MHI-CONAPPWM

MHICONAPPWM, MHI CONAPPWM, MHI-C0NAPPWM, MHI-CONAPPWM, MH1-CONAPPWM

Card Access Inc BT, BLE and 802.11abgn Radio Module CONAPPWM

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: MHI-CONAPPWM is MHI. The remaining characters of the FCC ID, -CONAPPWM, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: BT, BLE and 802.11abgn Radio Module

App # Purpose Date Unique ID
1 Original Equipment 2016-09-06 hjCgO5HVhqIbT9TiODDAVQ==
2 Original Equipment 2016-09-06 ciqPTMA1qLqWTjsTjOTQmA==
3 Original Equipment 2016-09-06 +voCeyphPQNYsU3iqua6CA==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: LTE 255,Unlicensed NII-3 DOWN | LTE 46,TD Unlicensed DOWN |
Frequency RangePower OutputRule PartsGrant Notes App #
2.402-2.48 GHz Bluetooth1.5 mW15CCC 2.1
2.402-2.48 GHz Bluetooth3.7 mW15CCC 1.1
2.412-2.462 GHz 2.4 GHz WiFi51.6 mW15CCC 2.2
5.18-5.24 GHz 5 GHz WiFi101.6 mW15E38, CC 3.1
5.26-5.32 GHz 5 GHz WiFi DFS102.3 mW15E38, CC 3.2
5.5-5.7 GHz 5 GHz WiFi101.2 mW15E38, CC 3.3
5.745-5.825 GHz 5 GHz WiFi104.7 mW15E38, CC 3.4

Exhibits

Available Exhibits

App #Document Type Submitted
Available
1 16U22930-E7V3 FCCIC Report MPETest Report
Adobe Acrobat PDF (301 kB)
2016-09-05
2016-09-06
1 16U22930-E1V2 FCCIC Report BTTest Report
Adobe Acrobat PDF (2320 kB)
2016-09-05
2016-09-06
1 Connected_Appliances_UGUsers Manual
Adobe Acrobat PDF (552 kB)
2016-09-05
2017-01-01
1 CONAPPWM_Integrator_GuideUsers Manual
Adobe Acrobat PDF (577 kB)
2016-09-05
2017-01-01
1 16U22930-E1V2 FCCIC Setup Photos BTTest Setup Photos
Adobe Acrobat PDF (730 kB)
2016-09-05
2017-01-01
1 Internal PhotosInternal Photos
Adobe Acrobat PDF (3328 kB)
2016-09-05
2017-01-01
1 External PhotoExternal Photos
Adobe Acrobat PDF (1869 kB)
2016-09-05
2017-01-01
1 Proposed_Label_and_LocationID Label/Location Info
Adobe Acrobat PDF (486 kB)
2016-09-05
2016-09-06
1 Request for Modular Approval per section 15.212 requirementsCover Letter(s)
Adobe Acrobat PDF (291 kB)
2016-09-05
2016-09-06
1 FCC_Request_for_ConfidentialityCover Letter(s)
Adobe Acrobat PDF (320 kB)
2016-09-05
2016-09-06
1 FCC_Agent_Auth_Letter(UL)Cover Letter(s)
Adobe Acrobat PDF (126 kB)
2016-09-05
2016-09-06
3 16U22930-E7V3 FCCIC Report MPERF Exposure Info
Adobe Acrobat PDF (301 kB)
2016-09-05
2016-09-06
3 16U22930-E5V1 FCCIC REPORT DFS UNII WLANTest Report
Adobe Acrobat PDF (976 kB)
2016-09-05
2016-09-06
3 16U22930-E4V2 FCCIC Report UNII WLAN_2 of2Test Report
Adobe Acrobat PDF (5950 kB)
2016-09-05
2016-09-06
3 16U22930-E4V2 FCCIC Report UNII WLAN_1 of 2Test Report
Adobe Acrobat PDF (4825 kB)
2016-09-05
2016-09-06
3 Connected_Appliances_UGUsers Manual
Adobe Acrobat PDF (552 kB)
2016-09-05
2017-01-01
3 CONAPPWM_Integrator_GuideUsers Manual
Adobe Acrobat PDF (577 kB)
2016-09-05
2017-01-01
3 16U22930-E5V1 FCCIC SETUP PHOTOS DFS UNII WLANTest Setup Photos
Adobe Acrobat PDF (95 kB)
2016-09-05
2017-01-01
3 16U22930-E4V2 FCCIC Setup Photos UNII WLANTest Setup Photos
Adobe Acrobat PDF (720 kB)
2016-09-05
2017-01-01
3 Internal PhotosInternal Photos
Adobe Acrobat PDF (3328 kB)
2016-09-05
2017-01-01
3 External PhotosExternal Photos
Adobe Acrobat PDF (1869 kB)
2016-09-05
2017-01-01
3 Proposed_Label_and_LocationID Label/Location Info
Adobe Acrobat PDF (486 kB)
2016-09-05
2016-09-06
3 Request for Modular Approval per section 15.212 requirementsCover Letter(s)
Adobe Acrobat PDF (291 kB)
2016-09-05
2016-09-06
3 FCC_Request_for_ConfidentialityCover Letter(s)
Adobe Acrobat PDF (320 kB)
2016-09-05
2016-09-06
3 FCC_Agent_Auth_Letter(UL)Cover Letter(s)
Adobe Acrobat PDF (126 kB)
2016-09-05
2016-09-06
2 16U22930-E7V3 FCCIC Report MPERF Exposure Info
Adobe Acrobat PDF (301 kB)
2016-09-05
2016-09-06
2 16U22930-E3V2 FCCIC Report DTSTest Report
Adobe Acrobat PDF (4304 kB)
2016-09-05
2016-09-06
2 16U22930-E2V2 FCCIC Report BLETest Report
Adobe Acrobat PDF (2179 kB)
2016-09-05
2016-09-06
2 Connected_Appliances_UGUsers Manual
Adobe Acrobat PDF (552 kB)
2016-09-05
2017-01-01
2 CONAPPWM_Integrator_GuideUsers Manual
Adobe Acrobat PDF (577 kB)
2016-09-05
2017-01-01
2 16U22930-E3V2 FCCIC Setup Photos DTSTest Setup Photos
Adobe Acrobat PDF (508 kB)
2016-09-05
2017-01-01
2 16U22930-E2V2 FCCIC Setup Photos BLETest Setup Photos
Adobe Acrobat PDF (730 kB)
2016-09-05
2017-01-01
2 Internal PhotosInternal Photos
Adobe Acrobat PDF (3328 kB)
2016-09-05
2017-01-01
2 External PhotosExternal Photos
Adobe Acrobat PDF (1869 kB)
2016-09-05
2017-01-01
2 Proposed_Label_and_LocationID Label/Location Info
Adobe Acrobat PDF (486 kB)
2016-09-05
2016-09-06
2 Request for Modular Approval per section 15.212 requirementsCover Letter(s)
Adobe Acrobat PDF (291 kB)
2016-09-05
2016-09-06
2 FCC_Request_for_ConfidentialityCover Letter(s)
Adobe Acrobat PDF (320 kB)
2016-09-05
2016-09-06
2 FCC_Agent_Auth_Letter(UL)Cover Letter(s)
Adobe Acrobat PDF (126 kB)
2016-09-05
2016-09-06

APP # 1 (2016-09-06)

App # Document Type Submitted
Available
1 16U22930-E7V3 FCCIC Report MPE Test Report
Adobe Acrobat PDF (301 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
1 16U22930-E1V2 FCCIC Report BT Test Report
Adobe Acrobat PDF (2320 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
1 Connected_Appliances_UG Users Manual
Adobe Acrobat PDF (552 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
1 CONAPPWM_Integrator_Guide Users Manual
Adobe Acrobat PDF (577 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
1 16U22930-E1V2 FCCIC Setup Photos BT Test Setup Photos
Adobe Acrobat PDF (730 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
1 Internal Photos Internal Photos
Adobe Acrobat PDF (3328 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
1 External Photo External Photos
Adobe Acrobat PDF (1869 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
1 Proposed_Label_and_Location ID Label/Location Info
Adobe Acrobat PDF (486 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
1 Request for Modular Approval per section 15.212 requirements Cover Letter(s)
Adobe Acrobat PDF (291 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
1 FCC_Request_for_Confidentiality Cover Letter(s)
Adobe Acrobat PDF (320 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
1 FCC_Agent_Auth_Letter(UL) Cover Letter(s)
Adobe Acrobat PDF (126 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00

APP # 3 (2016-09-06)

App # Document Type Submitted
Available
3 16U22930-E7V3 FCCIC Report MPE RF Exposure Info
Adobe Acrobat PDF (301 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
3 16U22930-E5V1 FCCIC REPORT DFS UNII WLAN Test Report
Adobe Acrobat PDF (976 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
3 16U22930-E4V2 FCCIC Report UNII WLAN_2 of2 Test Report
Adobe Acrobat PDF (5950 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
3 16U22930-E4V2 FCCIC Report UNII WLAN_1 of 2 Test Report
Adobe Acrobat PDF (4825 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
3 Connected_Appliances_UG Users Manual
Adobe Acrobat PDF (552 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
3 CONAPPWM_Integrator_Guide Users Manual
Adobe Acrobat PDF (577 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
3 16U22930-E5V1 FCCIC SETUP PHOTOS DFS UNII WLAN Test Setup Photos
Adobe Acrobat PDF (95 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
3 16U22930-E4V2 FCCIC Setup Photos UNII WLAN Test Setup Photos
Adobe Acrobat PDF (720 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
3 Internal Photos Internal Photos
Adobe Acrobat PDF (3328 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
3 External Photos External Photos
Adobe Acrobat PDF (1869 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
3 Proposed_Label_and_Location ID Label/Location Info
Adobe Acrobat PDF (486 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
3 Request for Modular Approval per section 15.212 requirements Cover Letter(s)
Adobe Acrobat PDF (291 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
3 FCC_Request_for_Confidentiality Cover Letter(s)
Adobe Acrobat PDF (320 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
3 FCC_Agent_Auth_Letter(UL) Cover Letter(s)
Adobe Acrobat PDF (126 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00

APP # 2 (2016-09-06)

App # Document Type Submitted
Available
2 16U22930-E7V3 FCCIC Report MPE RF Exposure Info
Adobe Acrobat PDF (301 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
2 16U22930-E3V2 FCCIC Report DTS Test Report
Adobe Acrobat PDF (4304 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
2 16U22930-E2V2 FCCIC Report BLE Test Report
Adobe Acrobat PDF (2179 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
2 Connected_Appliances_UG Users Manual
Adobe Acrobat PDF (552 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
2 CONAPPWM_Integrator_Guide Users Manual
Adobe Acrobat PDF (577 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
2 16U22930-E3V2 FCCIC Setup Photos DTS Test Setup Photos
Adobe Acrobat PDF (508 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
2 16U22930-E2V2 FCCIC Setup Photos BLE Test Setup Photos
Adobe Acrobat PDF (730 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
2 Internal Photos Internal Photos
Adobe Acrobat PDF (3328 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
2 External Photos External Photos
Adobe Acrobat PDF (1869 kB)
2016-09-05 00:00:00
2017-01-01 00:00:00
2 Proposed_Label_and_Location ID Label/Location Info
Adobe Acrobat PDF (486 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
2 Request for Modular Approval per section 15.212 requirements Cover Letter(s)
Adobe Acrobat PDF (291 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
2 FCC_Request_for_Confidentiality Cover Letter(s)
Adobe Acrobat PDF (320 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00
2 FCC_Agent_Auth_Letter(UL) Cover Letter(s)
Adobe Acrobat PDF (126 kB)
2016-09-05 00:00:00
2016-09-06 00:00:00

APP # 1 (2016-09-06)

App # Document Type Submitted
Available
1 SCH-LYNX-220_Schematics Schematics
Adobe Acrobat PDF (1839 kB)
2016-09-05 00:00:00
N/A

APP # 2 (2016-09-06)

App # Document Type Submitted
Available
2 Puma Block Diagram Block Diagram
Adobe Acrobat PDF (34 kB)
2016-09-05 00:00:00
N/A

APP # 3 (2016-09-06)

App # Document Type Submitted
Available
3 Puma_Antenna_Spec_V100 Operational Description
Adobe Acrobat PDF (337 kB)
2016-09-05 00:00:00
N/A
3 SCH-LYNX-220_Schematics Schematics
Adobe Acrobat PDF (1839 kB)
2016-09-05 00:00:00
N/A

APP # 1 (2016-09-06)

App # Document Type Submitted
Available
1 Puma Block Diagram Block Diagram
Adobe Acrobat PDF (34 kB)
2016-09-05 00:00:00
N/A

APP # 2 (2016-09-06)

App # Document Type Submitted
Available
2 Theory_of_Operation Operational Description
Adobe Acrobat PDF (381 kB)
2016-09-05 00:00:00
N/A

APP # 3 (2016-09-06)

App # Document Type Submitted
Available
3 WLAN Channel Plan and Technical Description Operational Description
Adobe Acrobat PDF (191 kB)
2016-09-05 00:00:00
N/A
3 KDB 594280 D02 v01r03 U-NII Device SW Security Statement_Puma Operational Description
Adobe Acrobat PDF (326 kB)
2016-09-05 00:00:00
N/A

APP # 1 (2016-09-06)

App # Document Type Submitted
Available
1 Theory_of_Operation Operational Description
Adobe Acrobat PDF (381 kB)
2016-09-05 00:00:00
N/A

APP # 2 (2016-09-06)

App # Document Type Submitted
Available
2 Puma_Antenna_Spec_V100 Operational Description
Adobe Acrobat PDF (337 kB)
2016-09-05 00:00:00
N/A

APP # 3 (2016-09-06)

App # Document Type Submitted
Available
3 Puma Block Diagram Block Diagram
Adobe Acrobat PDF (34 kB)
2016-09-05 00:00:00
N/A

APP # 2 (2016-09-06)

App # Document Type Submitted
Available
2 SCH-LYNX-220_Schematics Schematics
Adobe Acrobat PDF (1839 kB)
2016-09-05 00:00:00
N/A

APP # 3 (2016-09-06)

App # Document Type Submitted
Available
3 Theory_of_Operation Operational Description
Adobe Acrobat PDF (381 kB)
2016-09-05 00:00:00
N/A

APP # 1 (2016-09-06)

App # Document Type Submitted
Available
1 Puma_Antenna_Spec_V100 Operational Description
Adobe Acrobat PDF (337 kB)
2016-09-05 00:00:00
N/A

APP # 2 (2016-09-06)

App # Document Type Submitted
Available
2 WLAN Channel Plan and Technical Description Operational Description
Adobe Acrobat PDF (191 kB)
2016-09-05 00:00:00
N/A

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Card Access Inc
FCC Registration Number (FRN): 0003758182
Alphanumeric FCC ID: MHICONAPPWM
Unique Application Identifier: hjCgO5HVhqIbT9TiODDAVQ==
Line one: 11778 South Election Road
Line two: Suite 260
City: Draper
State: Utah
Country: United States
Zip Code: 84020

TCB Information
TCB Application Email Address: LST.FRE.CertNotice@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: MHI
Product Code: -CONAPPWM

Person at the applicant's address to receive grant or for contact
Name: James A Stout
Title: Vice President Engineering
Telephone Number: 801-748-4900 Extension: 11
Fax Number: 801-748-4901
Email: jstout@cardaccess-inc.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   01/01/2017
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): BT, BLE and 802.11abgn Radio Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Verification Services Inc. (formerly UL CCS)
First Name:   Matthew
Last Name:   Marotto
Telephone Number: 919-549-1652 Extension:
Fax Number:  000-000-0000
E-mail:  matthew.j.marotto@ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ana Aumentado
Title of authorized signature: 

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Card Access Inc
FCC Registration Number (FRN): 0003758182
Alphanumeric FCC ID: MHICONAPPWM
Unique Application Identifier: ciqPTMA1qLqWTjsTjOTQmA==
Line one: 11778 South Election Road
Line two: Suite 260
City: Draper
State: Utah
Country: United States
Zip Code: 84020

TCB Information
TCB Application Email Address: LST.FRE.certnotice@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: MHI
Product Code: -CONAPPWM

Person at the applicant's address to receive grant or for contact
Name: James A Stout
Title: Vice President Engineering
Telephone Number: 801-748-4900 Extension: 11
Fax Number: 801-748-4901
Email: jstout@cardaccess-inc.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   01/01/2017
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): BT, BLE and 802.11abgn Radio Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Verification Services Inc. (formerly UL CCS)
First Name:   Matthew
Last Name:   Marotto
Telephone Number: 919-549-1652 Extension:
Fax Number:  000-000-0000
E-mail:  matthew.j.marotto@ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power is conducted. This device supports channel bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed 0074o provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ana Aumentado
Title of authorized signature: 

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Card Access Inc
FCC Registration Number (FRN): 0003758182
Alphanumeric FCC ID: MHICONAPPWM
Unique Application Identifier: +voCeyphPQNYsU3iqua6CA==
Line one: 11778 South Election Road
Line two: Suite 260
City: Draper
State: Utah
Country: United States
Zip Code: 84020

TCB Information
TCB Application Email Address: LST.FRE.CertNotice@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: MHI
Product Code: -CONAPPWM

Person at the applicant's address to receive grant or for contact
Name: James A Stout
Title: Vice President Engineering
Telephone Number: 801-748-4900 Extension: 11
Fax Number: 801-748-4901
Email: jstout@cardaccess-inc.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   01/01/2017
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): BT, BLE and 802.11abgn Radio Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Verification Services Inc. (formerly UL CCS)
First Name:   Matthew
Last Name:   Marotto
Telephone Number: 919-549-1652 Extension:
Fax Number:  000-000-0000
E-mail:  matthew.j.marotto@ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power is conducted. This device supports 20 and 40 MHz channel bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ana Aumentado
Title of authorized signature: 

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/06/2016

Application Dated: 09/05/2016
Card Access Inc
11778 South Election Road
Suite 260
Draper, UT 84020
 
Attention: James Stout , Vice President Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MHI-CONAPPWM
Name of Grantee:  Card Access Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BT, BLE and 802.11abgn Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.1016  
38 CC 15E 5260.0  -  5320.0 0.1023  
38 CC 15E 5500.0  -  5700.0 0.1012  
38 CC 15E 5745.0  -  5825.0 0.1047  

Output power is conducted. This device supports 20 and 40 MHz channel bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Card Access Inc
11778 South Election Road Suite 260
Draper, UT 84020
United States
  Date of Grant: 09/06/2016

Application Dated: 09/05/2016
 
Attention: James Stout , Vice President Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MHI-CONAPPWM
Name of Grantee:  Card Access Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BT, BLE and 802.11abgn Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.1016  
38 CC 15E 5260.0  -  5320.0 0.1023  
38 CC 15E 5500.0  -  5700.0 0.1012  
38 CC 15E 5745.0  -  5825.0 0.1047  

Output power is conducted. This device supports 20 and 40 MHz channel bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA980539
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/06/2016

Application Dated: 09/05/2016
Card Access Inc
11778 South Election Road
Suite 260
Draper, UT 84020
 
Attention: James Stout , Vice President Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MHI-CONAPPWM
Name of Grantee:  Card Access Inc
Equipment Class: Digital Transmission System
Notes: BT, BLE and 802.11abgn Radio Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0015  
CC 15C 2412.0  -  2462.0 0.0516  

Output power is conducted. This device supports channel bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed 0074o provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Card Access Inc
11778 South Election Road Suite 260
Draper, UT 84020
United States
  Date of Grant: 09/06/2016

Application Dated: 09/05/2016
 
Attention: James Stout , Vice President Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MHI-CONAPPWM
Name of Grantee:  Card Access Inc
Equipment Class: Digital Transmission System
Notes: BT, BLE and 802.11abgn Radio Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0015  
CC 15C 2412.0  -  2462.0 0.0516  

Output power is conducted. This device supports channel bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed 0074o provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA227008
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/06/2016

Application Dated: 09/05/2016
Card Access Inc
11778 South Election Road
Suite 260
Draper, UT 84020
 
Attention: James Stout , Vice President Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MHI-CONAPPWM
Name of Grantee:  Card Access Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BT, BLE and 802.11abgn Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0037  

Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Card Access Inc
11778 South Election Road Suite 260
Draper, UT 84020
United States
  Date of Grant: 09/06/2016

Application Dated: 09/05/2016
 
Attention: James Stout , Vice President Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MHI-CONAPPWM
Name of Grantee:  Card Access Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BT, BLE and 802.11abgn Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0037  

Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA634268

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details