FCC ID MKZ2411EZYLINK-E

2.4GHz Spread Spectrum Station Radio

by OTC Wireless Inc

Grantee Code: MKZ   Product Code: 2411EZYLINKE
Latest application date: 2002-02-15

FCC ID Device Details

FCC IDMKZ2411EZYLINK-E
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMKZ
Product Code2411EZYLINKE
Applicant BusinessOTC Wireless Inc 🇺🇸
Related Domains otcwireless.com
Equipment Class2.4GHz Spread Spectrum Station Radio
Test FirmCompliance Certification Services Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2002-02-15

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2002-02-15PDF 755.8 KB
Internal PhotosInternal Photos2002-02-15PDF 1.1 MB
External PhotosExternal Photos2002-02-15PDF 552 KB
FCC ID label format and locationID Label/Location Info2002-02-15PDF 78.5 KB
Block DiagramBlock Diagram2002-02-15PDF 15.7 KB
Schematic diagramSchematics2002-02-15PDF 171.7 KB
Technical explanationOperational Description2002-02-15PDF 9.5 KB
Theory of operationOperational Description2002-02-15PDF 22.7 KB
Test Setup PhotosTest Setup Photos2002-02-15PDF 664.2 KB
Processing Gain DataTest Report2002-02-15PDF 51.6 KB
Test ReportTest Report2002-02-15PDF 3.5 MB
Modification ReportCover Letter(s)2002-02-15PDF 21.8 KB
Professional Installation StatementCover Letter(s)2002-02-15PDF 106.9 KB
TCB Q and ACover Letter(s)2002-02-15PDF 3.7 KB
Antenna SpecificationParts List/Tune Up Info2002-02-15PDF 76.2 KB
MPE CalculationRF Exposure Info2002-02-15PDF 19.5 KB

Application Information

Application IDBw8k6MtGy4jMjeoVPqdtsg==
Final Action Date2002-02-15
Application PurposeOriginal Equipment
Applicant FRN0006383442
Model2411EZYLINK-E
Frequency Range2412-2462 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device Description2.4GHz Spread Spectrum Station Radio
Responsible PartyJen Tsao, Program Director, wou@otcwireless.com , 510-490-8288
AgentSteve Steve Steve, Compliance Certification Services, scheng@ccsemc.com , 408-463-0885
Test FirmSteve Cheng, Compliance Certification Services Inc, scheng@ccemc.com , 408-463-0885
TCB EmailMIKEKUO@CCSEMC.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutpower is conducted. Professional installation required. The antenna(s) used for this transmitter, as documented in this filing, must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
Bw8k6MtGy4jMjeoVPqdtsg==2002-02-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.163000015C19, 20, 28

Grants

TCB Grant - Application Bw8k6MtGy4jMjeoVPqdtsg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 02/15/2002

Application Dated: 02/15/2002
OTC Wireless Inc
48499 Milmont Drive
Fremont, CA 94538-7336
 
Attention: Jen Tsao , Program Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MKZ2411EZYLINK-E
Name of Grantee:  OTC Wireless Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2.4GHz Spread Spectrum Station Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 20 28 15C 2412.0  -  2462.0 0.163  

Outpower is conducted. Professional installation required. The antenna(s) used for this transmitter, as documented in this filing, must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.

EAS Grant - Application Bw8k6MtGy4jMjeoVPqdtsg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

OTC Wireless Inc
48499 Milmont Drive
Fremont, CA 94538-7336
United States
  Date of Grant: 02/15/2002

Application Dated: 02/15/2002
 
Attention: Jen Tsao , Program Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MKZ2411EZYLINK-E
Name of Grantee:  OTC Wireless Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2.4GHz Spread Spectrum Station Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 20 28 15C 2412.0  -  2462.0 0.163  

Outpower is conducted. Professional installation required. The antenna(s) used for this transmitter, as documented in this filing, must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.

Mail To: